Is the order of adjustments important?

In a tutorial video on Aperture 1.5 on sharpening (http://www.apple.com/support/aperture/tutorials/edge_sharpen/) they tell me to make any other adjustments I want to make before sharpening. I have never read nor heard of this importance in Aperture before, although in extreme cases I did suspect it can make a difference in which order the adjustments are done.
Is the order of adjustments indeed important in Aperture 2.1.4?
If so:
- isn't it strange that at a later time you cannot see the order of adjustments made earlier?
- are there general guidelines what order is best in most cases?
- can I make an adjustment X twice (before adjustment Y and after adjustment Y). This could, theoretically, make a difference with adjustment X once and adjustment Y once.
This may be be rather silly and academic questions. In daily use I think it does not matter.
Koen, from the Netherlands

I think the order of adjustments isn't important +per se+, but it may change some stuff.
For example, if you boost your contrast and then adjust colours, it might not been as accurate as with "out of the box" colours. Again, it's my guess.
Non-destructive raw editing is made to prevent this kind of issue, so maybe my example is a bad one and there is no problem at all with the order of adjustments.

Similar Messages

FCPX does it transcode media in the order it was imported?

Does any one know how FCPX handles transcoding media? Does it transcode in the order it was imported?

Not sure, but I wonder why that would be important. You can begin working immediately, and FCP X will use your original media or optimized media if present, seamlessly. So if it takes an hour for some clip A to be optimized, FCP X will use the original and then automatically start using the optimized when it is ready.

IDVD changed the order of photos imported from Aperture

I created a project in Aperture from two different camera inputs. One had EDT and the other had PDT. I didn't think to make them the same time zone. After putting the combined photos in the order I wanted, I called the Aperture file from iDVD to create the slide show. IDVD changed the order. I am not sure what piece of Meta data it looked at to create its order. I had to go back into iDVD and recreate the order I wanted.
How does iDVD decide which order when the file has a mix of photos not from the same camera?
Thanks

How does iDVD decide which order when the file has a mix of photos not from the same camera?
Good question and frankly I don't know the answer.
But let me know if this helps:
http://www.automator.us/aperture/example-03.html

Make iPhoto import clips without rearranging the order????

I made a movie of some friends playing football on an older version of iMovie with transitions and titles, etc. As a backup, I exported the movie back onto my digital camcorder. Now I would like to use iMovie 09 to create a higher quality mp4 of the movie than I did before. So I imported the movies from the camcorder into iMovie 09. Works fine except... iMovie 09 breaks the movie into clips and reorders them with all the transitions and titles at the end.
Is it possible to make iMovie leave the movie as is. The older iMovies would break a long movie into clips, but would leave them in the correct order and when played would be seamless. What's up with iMovie 09 and can I make it stop messing with the order of my imports?
Thank you,
Bob A.

Okay thanks for the tip, I think I might be one small step closer.
I copied the "iPhoto Library" folder off the disk, and double clicked the "Library6.iPhoto" file (so it must have been created by iPhoto 6). iPhoto '09 proceeded to convert the library to the '09 format, and the photos in this newly transformed library retain their titles and descriptions. Yay!
But now I need to figure out a way to merge this library into my main library. I tried importing this library into my main one, but it resulted in the same problem of ignoring the titles and descriptions. Drag-and-dropping the newly created library into the main library brings the same result.

Facing data type error when changing the order of fields in a query

Hello Experts
I am working on E sourcing 5.1.
I have a query with some filters . I want to change the position of a particular filter.
Basically I want to move a filter of type date to the top , so that it is the 1st parameter.
I was able to do this by reorder option.
However at runtime it gives me an error saying that "error u201CORA-00932: inconsistent datatypes: expected NUMBER got date."
Later I reverted back my changes so that the date filed is at its original position and faced no issues.
Query worked fine.
Is the order of filters important when executing a query.
Please suggest how can I move the date filter to the top of the query's filter list.
Regards
Vikas

Hello Vikas,
Its not the SELECT statements that you need to change. You have to change the WHERE caluse.
In the WHERE clause, some of the conditions will have some table column equated to a '?' symbol. This symbol is a place-holder for a filter prompt. There is a one-to-one correspondence between the '?' symbols and the filter prompts created in the query(under the Filter Prompt tab). This means that the first '?' corresponds to the first filter prompt, second '?' to the second filter prompt and so on.
Keeping the above information in mind, you can attempt to make changes to your query. You can duplicate your existing query and try your hands at it.
One more point worth mentioning : It is evident that if you need to use the same filter prompt at more than once place in the query definition, you have to create more than one instance of that query prompt.(Here by another instance I mean that the two filter prompts should have same values in their fields when you define them.) But even when you create more than one instance of a filter prompt, on the UI it will appear just as a single instance.
If things have become more confusing than before (of which there is a high probability ) then please go through the online help for Queries. It has got an extensive documenation and will be surely be of some help to you.
Good luck!!
Devesh

Pricing in the order

Dear experts,
Could any body tell me how the pricing is read in the crm order ,could you tell me which function module is doing that.
Thanks

Hi,
Use the FM:CRM_PRIDOC_READ_OW to read the order price details.
Pass the order guid in import parameter IV_HEADER_GUID
Regards,
PePe

Why do columns not appear in the same order as the fields on my imported form?

Hello All
I am an Acrobat X user and make numerous forms through Acrobat. However, when I import the file into FormsCentral, the order of the fields in the table do not correspond to the order in which they appear on my form. The fields on my form are in a calendar format so they appear from left-to-right. I'm wondering if when I do the import, it is read by FormsCentral from top-to-bottom instead or is it random. It's a real inconvenience and severely inhibits my workflow when I have to rearrange the columns to work with the data. Any suggestions or insight would be appreciated.
Thanks
Daryl

Files have no order. File management programs like the finder or windows explorer will display files according to your selected display sort. Typically alpha by file name, date created, size, date modified. So to view them in a selected order you need to sort on an attribute that accomplishes that. The easiest usually is to export photos using the sequential naming option then displaying in alpha order
LN

I created a slideshow but all the photos are now mixed up. i just dragged the event to a new slideshow. how can i get them into the same order they were imported in?

my slides are all mixed up after i imported them into a new slideshow. i just copied them from the events and dragged the icon to the new slideshow but the have re arranged themselves into a random order. I want them to play in the order i took them and copied them . How can i do this please. am working with iOS 7 on my iMac using iPhoto latest version.

Processor 2,8 GHz Intel Core i54, GB 1333 MHz DDR3,ATI Radeon HD 5750 1024 MB,OSX 10.9.5 (13F34), im using iphoto version 9.5.1. which has been updated.. im using iOS mavericks iMac
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core
Processor Speed: 2,8 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 8 MB
Memory: 4 GB
Processor In

HT1660 My itunes library has automatically started to list my songs alphabetically. I do not want this. How do I change it so that when albums come up, the songs are listed in the order of the imported album, NOT alphabetically.

My itunes library has automatically started to list my songs alphabetically. I do not want this. How do I change it so that when albums come up, the songs are listed in the order of the imported album, NOT alphabetically.

For the missing Artists on your iPod, make sure their tracks in iTunes are not marked as "Part of a compilation" in iTunes. You can do this by highlighting the track, right->clicking on them and choosing "Get Info" from the shortcut menu. When the window pops up, head over to the Info tab and make sure there is NO tick mark next to this option in the lower right hand corner. Lastly, sync the updated changes to your iPod.
B-rock

I am making a slideshow in imovie, how do i change the order of my photos once i have imported them?

I am making a slideshow in imovie (first time). I imported all of my photos, but now i need to change the order of the photos. How can i do that?
Thanks a bunch!
John

not quite sure if i understand. here is where all my pics are. but i can seem to move them around

How do I keep the order of sequentially named images from randomizing on import?

I have several thousand images that I've named sequentially and I'd like to add them to my book, so that each image takes up a single page and the images display sequentially. The issue I've been having is that the order becomes jumbled when the images are imported.
I've been importing images a hundred or so at a time using different methods. When I go to INSERT, CHOOSE and then select my files they land on the page initially in the correct order. When I change their placement to INLINE their order randomizes.
I've also tried this process with only five images and it doesn't seem to make a difference.
As a way of trying to work around this, I found that if I make a pages document with the correct order and then insert it as a new chapter, the order seems to improve. But still the image order becomes jumbled badly in some areas. There does seem to be some improvement though.
Does anyone have any ideas of how to deal with this? Any advice would be greatly appreciated. Thanks!
One more thing: The images themselves are very similar to one another and so the only way I've been able to tell which is which for sure is by selecting it and reading it's name in the inspector. Is it possible that this is actually some kind of lag between what I've selected and the image name updating? I am working with a bunch of images, but then again, I was having the same issue with only a few images so maybe not.

The script that I used in my action is here: http://blogs.adobe.com/jkost/2010/09/add-file-name-as-text-layer.html
The files that I've been working with were originally exported automatically from a PDF and then renamed and resized using Automator. The names are sequential 00001 - 15000.gif but for some reason they only import in the correct order after I've run them through my PS action... Which is slow going unfortunately. I agree that it's unlikely that their appearance has anything to do with the issue. Not sure what was causing the problem, but I'd like to if anyone willing to make an educated guess happens to be reading.
The method I use to make a multipage iBook without placing each image individually is to edit my chapter template so that it's just full-page, linked, text boxes. Then I make a new chapter, grab up to 200 images in the finder and drag them on to the page while holding command. This places the images in the text box and adds pages automatically to fit everything I'm inserting.

The order of fields in imported pdf file

when i import a form i designed in indesign, the order of teh fields are not as i would like, i cant see any issue why the order would differ from the form.
how can i deal with this? is there a way to force and order.
Can i move the columns even in form central?

is there a way to lock the coulmnlayout after i have re arranged them?
if i re import the form afte ri have made some chnages i have to rearrange the colums again.
Also i appear to have a stray duplicate phantom checkbox column, i cant delete it or find it in my form.
also i get these errors on import, but yet there is no values under these fields.
The checkbox field Gas Certificate contains an export value. FormsCentral will record the checked state, but will not include the export value.
The checkbox field Purchase Milk contains an export value. FormsCentral will record the checked state, but will not include the export value.
The checkbox field Purchase Eggs contains an export value. FormsCentral will record the checked state, but will not include the export value.
The checkbox field Purchase Meat contains an export value. FormsCentral will record the checked state, but will not include the export value.
The checkbox field Purchase Fruit contains an export value. FormsCentral will record the checked state, but will not include the export value.
any ideas? the form is desiged using indesign and then imported.

Importing data for tuple changes the order from source file - please help

Hi all:
I am using MDM 7.1 with the new tuple functionality. I have to import some product texts in a specific order. Tuples is working fine, the only issue is that it changes the order of the rows when importing from Excel. Let's say I have product number
A123, Text 1
A123, Text 2
A123, Text 3
When importing in MDM I get:
A123, Text 2
A123, text 3
A123, Text 1
It is changing the order in which records are from source Excel file. Any ideas on how to force it to import in the same order as source file?
Thanks,
-Arturo Blasi.

import java.util.*;
import java.io.*;
Student Name: Qiang Wu
Student Number: 205722913
public class Check05C
     public static void main(String[] args) throws IOException
          Scanner input = new Scanner(System.in);
          PrintStream output = System.out;
          output.print("Please enter filename...");
          File MarkFile = new File(input.nextLine());
          Scanner fileinput = new Scanner(MarkFile);
          double average;
          int maxmark = 0;
          int minmark = 100;
          int sum = 0;
          for (int score = fileinput.nextInt(); fileinput.hasNextInt(); score = fileinput.nextInt())
               sum = sum + score;
               if (score >= maxmark)
                    maxmark = score;
               else if (score <= minmark)
                    minmark = score;
          average = (maxmark + minmark) / 2;
          output.println("Class Average is: " + average);
          output.println("Maximum mark is: " + maxmark);
          output.println("Minimum mark is: " + minmark);
          fileinput.close();
}: ) I still cant figure out how to modify.

Prepared statement with placeholders - the order or the names are important

Hi,
I'll explain my question, using the example from the OCCI documentation.
What if I do something like:
<pre>
// note the order
stmt->setSQL("BEGIN countFruit(:2, :1); END:");
stmt->setString(1, "Apples");
stmt->setString(2, "Oranges");
</pre>
This will become
<pre>
BEGIN countFruit( 'Apples', 'Oranges' ); END
</pre>
or
<pre>
BEGIN countFruit( 'Oranges', 'Apples' ); END
</pre>
So, if the answer is:
* *"the first one is correct"*, then - may I use whatever I want for placeholders (some strings, for example), just starting with ':' ?
* *"the second one is correct"*, then:
* * does this mean, that I can't use strings as placeholders (because setXXX does not take strings as first parameter, but a number - as position)
* * should I use consequent numbers, or I may use whatever I want. I mean, is this valid: "BEGIN countFruit(:13, :666); END:". So, if it is, does this mean, that I should use setXXX( 13, ...) and setXXX( 666, ...), instead of setXXX(1, ...) and setXXX(2, ...) ?
Sorry for the dummy questions, but I didn't see this explained in the doc (at least for 10g). And yes, I can test it, but this doesn't mean anything, it may be undefined behavior or server configuration, or whatever and I just want to be sure :)
Thanks in advance.
Best Regards,
Kiril Kirov

Looks like I have missed that.
I'm not sure I understand the difference, when using SQL and PL/SQL. Here's what I get, please correct me if I'm wrong:
For PL/SQL (for example - SP call), if I have
<pre>
BEGIN stored_procedure( :11, :22, :22, :33 ); END
</pre>
calling
<pre>
stmt->setString(3, "Apples");
</pre>
will set *"the third unique parameter"* - in this example, will replace ':33', right?
If so, will executing
<pre>
stmt->setString(2, "Oranges");
</pre> replace both ':22' placeholders?
And for standard SQL query, it's just the nth position. For example:
<pre>
INSERT INTO table VALUES(:11, :22, :22, :33);
</pre>
calling
<pre>
stmt->setString(3, "Apples");
</pre>
will replace the second ':22', right? It will become something like:
<pre>
INSERT INTO table VALUES(:11, :22, 'Apples', :33);
</pre>
About the summary: that would mean, that
<pre>
stmt->setSQL("BEGIN countFruit(:13, :666); END");
stmt->setString(1, "Apples");
stmt->setString(2, "Oranges");
</pre> is the correct way and it will be "translated" to:
<pre>
BEGIN countFruit( 'Apples', 'Oranges' ); END
</pre>
right?
One more case, sorry..
<pre>
stmt->setSQL("BEGIN countFruit(:1, :2, :3, :3, :2 ); END");
</pre>
How to set the second ':2' ? If ONLY "scanned left to right" is important and it stops on match (does not scan ALL parameters), does this mean, that to set the second ':2', I should use
<pre>
stmt->setString(4, "Apples");
</pre>
? Or it scans all placeholders and replaces the repeatable ones? In that case, I'll have to use
<pre>
stmt->setString(2, "Apples");
</pre>
to replace both ':2' ?
Edited by: Kiril Kirov on Jan 24, 2012 3:36 PM

WHEN I IMPORT MEDIA FROM MY CAMCORDER TO iMovie it doesn't load up in the order of the way it was recorded and i have to piece the movie in the correct order when i make tmy project!

WHEN I IMPORT MEDIA FROM MY CAMCORDER TO iMovie it doesn't load up in the order of the way it was recorded and i have to piece the movie in the correct order when i make tmy project!

You might try restarting your device, your router and your Apple TV.

Is the order of adjustments important?

Similar Messages

Maybe you are looking for