Is the pattern made with a filter

i need to make is again because i crop some thing of...

You might be able to do it in Illustrator I just did this with a little effort with Blends.
c.pfaffenbichler's method is much easier

Similar Messages

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?
On another note, the iPhone tells me that it's ''busy'' when opening a photo on the computer.
(I tried restarting my PC, connecting via another USB port, importing using PhotoStream, etc...)

Are you using the front or rear camera? When you say they are low quality, are you referring to file/pixel size, or how the picture looks? As far as upside down, how are you holding the phone? Older versions of Windows have issues reading the Metadata from the pictures and will not display the same.

Hello, I need to download the videos made with Ipad on a USB stick. How do I make them visible then with a Windows PC? I need to transform. Mov in that format? How to make? thanks

hello, I need to download the videos made with Ipad on a USB stick. How do I make them visible then with a Windows PC? I need to transform. Mov in that format? How to make? thanks

The camera connection kit can only be used to import photo/video files from a camera, SD card or USB flash drive. You can't import other types of files. You can't export any type of files using the camera connection kit.
How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
 Cheers, Tom

HT204088 Hello everyone, i want to know how can i found out the purchases made with my credit card (not by my apple ID)?

Hello everyone, i want to know how can i found out the purchases made with my credit card (not by my apple ID)?
I found out in my Credit Card bill some purchases in itunes store that wasn't made by me.
thanks to all helpers

This would be something you would need to address with your credit card company. Apple cannot tell you who else might have used your card nor what purchases they might have made. Call your credit card company and report the charges as fraudulent. You'll probably need to have them cancel your existing card and issue you a new one.
Regards.

This month I downloaded the newest version of PAGES. Now when I try to open the documents made with this program it says "You need a newer version of PAGES to open this document." I go to the App Store and says it has downloaded. What to do?

This month I downloaded the newest version of PAGES. The documents I have typed using this App will now not open and the message says-"You need a newer version of PAGES to open this document. Could anyone help me with this please. Thanks.

You have 2 versions of Pages on your Mac.
Pages 5.2.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 110 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
You can add the icon of the missing Pages on your Dock or open Pages from the Apple menu > Recent Items list.
Or you can archive Pages 5 so that it doesn't automatically open.
If you are unhappy about this review/rate Pages 5 in the App Store.
Peter

Live Paint - Selecting the Fills made with live paint

hi
A few questions about live paint.....
1) How do you select the fills you make with live paint by color? so you can change their properties ie, transparency, color?
2) How do you put the Live Painted Fills onto separate layers so you can turn them off/on easily and change their properties?
thanks

Expand the LivePaint object. Then ungroup as necessary for what you are trying to do.
JET

Using movie made with the slow motion option

Where can I see the movie made with the new option of "slow motion" besides on my iPhone5S screen?
It doesn't play through AirPlay and when exported to the desktop of my iMac no application can open it.
Any help is welcome.
Pedro

Hi Lucas,
there's a simple technical reason: to get a smooth video, you need 25/30 frames per second, so does your camcorder record the video...
apply a slow-mo just doubles (triples...) the frames - in result, you have 12 or less fps... that is choppy...
Grandmaster Dan shows some slow-motion alternatives on his excellent website...

How to find the perticular call is made with in +30 or -30 minutes.

hello masters ,
i got a repoting requirement such that i have to track the "calls made with in +30 or -30 minutes".

Hi
Pls provide more info. You mean to say you have to track the calls made 30 minutes prior and 30 minutes afterwards...how you know that afterwards calls which will be made..
Regards
N Ganesh

How to see purchases made with iTunes card

How do I find the purchases made with an iTunes card?

Go to iTunes on a computer and use the command Store > View My Account. After you log in, click on Purchase History.

How to open a edxcel file made with edxcel version before windows 1997

i have recently bought a imac and i am currently transfering my spreadsheets that i had on my old windows computor to my imac and i can not open them beacuse the where made with a edxcel version before 97 and i need the information that they contain beacuse it referse to my buissness finances

Barry Carver wrote:
i have recently bought an iMac and i am currently transfering my spreadsheets that i had on my old windows computor to my imac and i can not open them because they were made with a excel version before 97 and i need the information that they contain because it refers to my business finances
Hi,
Welcome to Apple discussions and the numbers '09 forum.
You might check dataviz.com, suppliers of MacLink Deluxe. They claim to support MS Excel 2.x, 3.0, 4.0, 5.0, 95, 97, 2000, XP 2002 files on the Windows side. On the Mac side, spreadsheet support includes Excel 2004 (.xls) and (listed as database support rather than spreadsheet) CSV files. Numbers '09 can, I think, open both those formats.
The other route is to find someone with a more recent version of Excel that can open you files and save them in a newer Excel format.
Regards,
Barry

Dragging a clip made with In/Out points from viewer

I'm using Tom Wolsky's book FCE 3.5 to learn FCE 4.
I'm hoping it will at least get me through some of the minutiae.
I'm on page 44 and 45 "Slicing your clips" and under "Slice 1" #9 it says I should drag the marked clip from the viewer and drop it in my newly created bin marked "Clips".
When I drag whats in the viewer with my new In/Out points into my browser, I'm dragging the entire "Temple" clip into my browser that has the marked In/Out points on it, not just the clip made with the In/Out points.......my understanding is that I'm supposed to be dragging the clip I just made, not the entire Temple scene with the In/Out points simply marked......
Naturally, any help or scathing insight would be great!

I guess I wasn't supposed to be dragging the clip itself, but the master clip >with In/Out points on it..........
but the master clip >with *(_new in/out points_ and been made to a Modify>Make Master Clip)* In/Out points on it.
The new ones are now independant.
Al

LR2 hang in develop module with graduated filter

I was in the Develop module and had just used the graduated filter to draw up from the bottom of the image. When I let go of the pen, the hourglass appeared and LR stopped responding. Many minutes later, I finally gave up and clicked on the window's close button. I got the usual Windows "app is not responding" dialog and told Windows to kill lightroom.
While LR was in the hung state, I started Procmon to see if anything interesting was visible there. While I saw no activity in lightroom.exe, I did see an endless series of operations in csrss.exe. These two operations were repeated endlessly:
543751 10:32:26.2519678 PM csrss.exe 1372 RegOpenKey HKLM\Software\Policies\Microsoft\Windows\Control Panel\Desktop NAME NOT FOUND Desired Access: Read
543752 10:32:26.2519724 PM csrss.exe 1372 RegOpenKey HKU\.Default\Software\Policies\Microsoft\Windows\Control Panel\Desktop NAME NOT FOUND Desired Access: Read
After killing lightroom, I no longer saw that pair of operations.
I have no idea whether this could be related to the lightroom hang or not, but thought I would pass it on in case it provided a clue.
Running Windows XP SP2 with all updates (except SP3) applied, nVidia 7600 GT, E6700 Core 2 Duo, 4 GB RAM (3.2 GB available), plentiful hard drive space free. Catalog is new with LR2 by re-importing all images; catalog was not converted from 1.4.1.

I'm having the same issue with graduated filter and adjustment brush and also one othe the predefined settings, I forgto which one, but it would lock up LR ervery time. My 30 day trial is now over and I think that I'm going to wait for LR2.x to be released :<(...
WinXP SP2, 3.0GHz Xeon 5260, 4GB, +30GB HD space

Re-size Layer with Smart Filter without affecting Smart Filter aspect of the layer

I made a wax seal on photoshop with a lot of embossment, bevelment and a Smart Filter. It's done and I just need to make it smaller so it fits well on my certificate. When I resize it (Ctr + T) It pops up a messgae that reads:
Adobe Photoshop CS6 Extended
"Smart Filters applied to layers contained in this group will be turned off temprarily while the transform is being previewed. They will be applied after commiting the transform."
OK
[] Don't show again
I click OK and I re-size the layer with free transform, and then hit enter. The Layer is resized but my Smart Filter which cretaes a wavy affect around the seal is totally distorted.
How do re-size my layer with smart filter without affecting the smart filter aspect of the layer

Right-click on the name of the Smart Object layer in the Layers panel to get the menu shown below. Pick "Convert to Smart Object" to encapsulate the SO and its Smart Filter and Layer Styles inside a new SO which can be resized without changes in appearance.

I have made with iweb a website on my macbook, now i want to change it, through my imac, how can I get in the program , which is on the mac book. On both computer I have Lion

i have made with iweb a website on my macbook, now i want to change it, through my imac, how can I get in the program , which is on the mac book. On both computer I have Lion

You need to transfer your domain.sites file from your MacBook to your iMac. This is the file where iWeb stores all info and can be found under User/Library/Application Support/iWeb/domain.sites.
Transfer this file from your MacBook to the same place on your iMac and double click the domain.sites file and iWeb will open it on your iMac and you can update your site from there too.

How can I use a shared library made with the application builder?

Hi,
I am using LabVIEW 7.1 running on Slackware 10.1 (kernel 2.4.29) and I am trying to call a graph display from a C program that I use for debugging VME access from a VMIVME controler. So using the application builder I built the VI as a shared library (graph.vi -> graph.so) containing a function called "graph". In my main program the call to the dlopen fails with the error: "graph.so: undefined symbol: UninitLVClient". When I examin graph.so with nm I see that UninitLVClient and other LabVIEW functions are indeed undefined and using ldd shows that graph.so has dependencies only on libc.so.* and *linux*.so.* but not on LabVIEW related stuff. Those functions are defined in the liblv.so that's in the cintools directory but I have no idea if the user is supposed to use that.
So I think I am missing an important concept here. Can somebody help or direct me to some documentation (I found lots of information about how to link external code to LabVIEW but nothing about how to link LabVIEW code to an external program)?

Thanks Watermann,
your message has been very useful so now I am linking to the proper library but I still have problems when trying to load dynamically the shared library produced with LabVIEW. It is strange that I could successfully load the lvrt library at loading time but it does not work when I am loading the library at execution time.
I made a small LabVIEW program that prints a hello window and I am calling it from a C program. In the first program main.c I am linking to the lvrt library at loading time and it works but in the second one I am linking dynamically at execution time and it does not work. For my work I need to be able to load code done in LabVIEW at execution time. Any help is appreciated!
Program main.c:
// small program to call a LabVIEW shared library
#include
#include
#include "hello.h" // got this from the LabVIEW builder, i.e. when I made the hello.so
int main(void)
printf("Hello from C!\nLets call LabVIEW now\n");
hello();
printf("Bye ... \n");
return 0;
The command to compile main.c, i.e. linking shared library lvrt when loading main program:
gcc -Wall -I /usr/local/lv71/cintools/ -o main main.c hello.so -l lvrt
The LD_LIBRARY_PATH has been defined and exported:
$ LD_LIBRARY_PATH=$PWD
$ export LD_LIBRARY_PATH
IT WORKS!
Program main2.c:
// small program to call a LabVIEW shared library
#include
#include
#include
int main(void)
void * h_lvrt;
void * h_hello;
void (* hello)(void);
char * error;
printf("Hello from C!\nLets call LabVIEW now\n");
// open LabVIEW RunTime shared library
// in my computer located at /usr/local/lib/liblvrt.so
h_lvrt = dlopen("/usr/local/lib/liblvrt.so", RTLD_NOW);
// check for error
error = dlerror();
if (error) {
printf("error : could not open LabVIEW RunTime library\n");
printf("%s\n", error);
return 1;
// open hello shared library
// in my computer located at /home/darss/lv_call/hello.so
h_hello = dlopen("hello.so", RTLD_NOW);
// check for error
error = dlerror();
if (error) {
// close LabVIEW RunTime shared library
dlclose(h_lvrt);
printf("error : could not open hello library\n");
printf("%s\n", error);
return 1;
// get function hello from library hello.so
hello = dlsym(h_hello, "hello");
// check for error
error = dlerror();
if (error) {
// close hello shared library
dlclose(h_hello);
// close LabVIEW RunTime shared library
dlclose(h_lvrt);
printf("error : could not get the hello function\n");
printf("%s\n", error);
return 1;
// call hello function
hello();
// close hello shared library
dlclose(h_hello);
// close LabVIEW RunTime shared library
dlclose(h_lvrt);
printf("Bye ... \n");
return 0;
The command to compile main2.c, i.e. dynamically linking library lvrt at execution of main2 program:
gcc -Wall -o main2 main2.c -l dl
The LD_LIBRARY_PATH still defined and exported.
IT DOES NOT WORK!
Program output:
Hello from C!
Lets call LabVIEW now
error : could not open hello library
/home/darss/lv_call/hello.so: undefined symbol: WaitLVDLLReady

Is the pattern made with a filter

Similar Messages

Maybe you are looking for