Is the Radio app down?

All I get is a blank screen with no stations listed. I restarted AppleTV and my router and that didn't help. All other features seem to be working correctly.
Thanks!
davemcg

Clicking update on each app individually works.
This also just started with the latest iTunes update. Itunes version 10.40 (80)
I hade the same problem on both iMac and MacBook Pro.

Similar Messages

  • HT5848 i didn't find the radio app on the music tab of my new ios 7

    i didn't find the radio app on the music tab of my new ios 7.

    I believe it is only available in the USA for now

  • Do you need Wifi to use the radio app on the IPad2

    Do you need Wifi to use the radio app on the IPad 2?

    The iPad doesn't have a radio receiver built in. The Radio app is playing radio stations that stream content on the Internet. So that's why you need either Wi-Fi or cellular.

  • How do I fix the buffering issues with the radio app?,

    How do I fix the buffering issues with the radio app? When I try to listen to the Hay House Radio station it buffers quite a lot for no apparent reason sometimes.  I have not been able to find any settings to adjust this. Does anyone know what I might be able to do to modify this problem?

    msbroome wrote:
    How do I fix the buffering issues with the radio app? When I try to listen to the Hay House Radio station it buffers quite a lot for no apparent reason sometimes.  I have not been able to find any settings to adjust this. Does anyone know what I might be able to do to modify this problem?
    What is your Internet data rate?

  • HT1551 When I try to use the radio app on Apple tv, it tells me it can't connect with the default server.  Can use Netflix and other apps. What should I do?

    Just hooked up my Apple tv.  Got Netflix and other apps to work, but when I use the radio app, it tells me it can't connect to the default server.  What should I do?

    Anybody? Just installed my new ATV and everytime I go select a radio station it spins and spins and spins - then when I go back to th emenu and then back into the radio to try again I get "Could not connect to "DEFAULT_SERVER" seems pretty specific!? I had no such problems with my ATV v1 I just ebayed!!
    PS. I am logged in with correct ID and can acces pretty much everything else

  • I use to stream music from my iphone to my airport express via my stereo, it no longer is an option on the radio app. what has happened?

    Not sure what has happened to my airport expres but I can no longer stream music to my stereo via the TuneIn Radio app or using my macbook pro, need help in fixing this problem.

    UPDATE:
    I have been stress testing StreamToMe in the house and  "out in the wild" and it is working very well.  There are one or two clunky steps in order to switch from the in-my-house wifi to the cellular network but it's just better (to me) than uploading about 750 GB of music that is restricted by iTunes rules and limitations to "the cloud".   The major advantage is that this solution plays more file formats than iTunes will.  In addition, I can access music files anywhere on my mac - even if they are not in my iTunes library. Playlists from iTunes are available, too.
    I am not associated with this company in any way.  I am astounded that there are not more solutions available and that there are not more people discussing this issue.  Subscription models like Spotify are great and the cloud is fine for those that don't have large libraries  But when I have a humongous library and I don't want to move it around up and down to someone else's server or pay to access it after I have already paid for it I find the lack of ease of doing this baffling.
    I hope that this info can help someone looking for information relating to this type of solution...
    Pete D.

  • I received a replacement iPod nano the beginning of January.  I did have radio app but now I don't.  How can I get it back?

    I received a replacement iPod nano 6th generation the beginning of January.  I did have the radio app but now I don't.  How do I get it back?

    Make sure your headphones are plugged all the way in. The white plastic on the headset jack should be flush with the body of the nano.

  • How do you stop the Radio on Apple TV 3rd gen?

    Ok, I can't believe I can't figure this out...
    I started listening to a radio station using the Radio app on the Apple TV and now I can't figure out how to shut it down. 
    I can press play/pause to pause it, but I can't figure out how to stop it entirely.  Even when I hit the menu buttons and then pause, I can't still see it listed as Now Playing.
    I'm utterly confused

    Seasons Greetings
    Pausing it is fine, when you choose to do something else with it, it will move on from radio.

  • Streaming radio app isn't working in background anymore on iPhone

    Hi everyone,
    Just changed Network provider on my iPhone and since my streaming radio app isn't working in background anymore.
    Changed the SIM card, got the new network and since as soon as want to listen to streaming radio while surfing on safari or use an other app the streaming radio app is turning off.
    Before could do both without any issues.
    I only use the radio app once connected on wifi.
    Does anyone have any idea what happened?
    Thank you in advance for any answer.
    Cheers

    It went well again by itself...
    Thank you for those how had a thought about it.
    Cheers.

  • Radio going down on 1310AP

    Hi there, I'm experiencing some issues with a 1310 LWAPP on a University, here is the scenario:
    The AP is directed to some specific classrooms and at a certain point the radio goes down or at least there is no more communication between the clients and the AP, but the association in the computers remain the same for a couple of minutes, after that the link goes down, but the weird thing is that the communciation to the AP via Ethernet remains up. We tested this and the ping's all were responding while the radio was down.
    Steps already done:
    -A new 1310 has been tested, same results.
    -A new power injector, same results.
    -The UTP cabling between the power injector and the IDF has been changed, same results.
    -The port to which the AP was connected at the IDF switch was changed, same results.
    I'm thinking as a possible solution:
    -Replacing the coax cabling between the power injector and the AP (not more than 15 ft).
    -Ensure the AC voltage at the power outlet is delivered correctly (110v) not less, not more.
    I'm wondering if this steps may be causing the device(s) to fail in such a way, because if it is not receiving the appropriate ammount of power the radio module simply goes down, but as the ethernet module requires less power it remains up.
    What do you think?
    Any recommendation is more than welcomed; too much time has been dedicated without success.
    Thanks in advance!

    For the troubleshooting chech the Red color indicates an overcurrent or overvoltage error condition disconnect input power from the power injector, check all coax cable connections for a possible short, wait approximately 1 minute, and reconnect input power to the power injector. If the LED turns red again, contact technical support for assistance.
    The power injector requires approximately 50 seconds to recover from an overcurrent or overvoltage condition.
    Off indicates input power is not available verify that the power module is connected to the power injector and that AC power is available or that 12- to 40-VDC input power is connected to the power injector.

  • Playing internet radio app on 4S over MB audio system

    I have an iPhone 4S and ran an internet radio app on it. Then I connected the phone with the ausio system of my 2011 MB E550. For about 2 seconds I could hear the radio station over the car speakers but then the phone switched to the ipod app. I could not switch back to the radio app neither was I able to stop the playing song on the phone since the desplay would not allow me to actually go into the ipod app while connected to the car audio system.
    Why is this and is there a way to make the phone play the internet radio station?
    The fact that I heard the radio station for about 2 seconds tells me that it generally is possible but then there must be something in the iphone software which makes it flip to the ipod. Can this be bridged without sacrificing the phone's warranty?

    I'm not saying that this is your problem but it could potentially be and needs to be corrected. After making the corrections as stated below test and let us know if things improve.
    If your DHCP range is 2 to 254 that means the whole range of addresses can be assigned to dynamically. This can cause problems because you haven't left any addresses available to be assigned statically. You will notice that addresses 90 and 100 are within that range.
    Set the DHCP range to 250 to 254. That reserves an range of 50 addresses for use by the DHCP. You don't need to make any changes to the IP addresses of the PC or Express as their addresses will now fall outside the range reserved for DHCP.

  • 5230 radio app refuses to start when I use bluetoo...

    Hi all,
    I am a happy owner of a Nokia 5230 phone, and I bought a BH-103 headset.
    Everything works fine except that the radio application that refuses to start with my bluetooth headset.
    The radio app is requiring a wired headset being connected.
    Is this  expected ? Or is this a bug ?

    Hi
    i recently purhcased a Nokia 5230 and everything worked until this week when the FM radio just refused to work. I was able to get all local stations no problem, on the phone it is showing RDS AF however when i try to do it manually it will  not allow me to change to turning the auto scan off, I have since purchased the correct headphones but the radio still will not work, also am getting a message that this new headset is a default accessory!!
    OCha wrote:
    Hi all,
    I am a happy owner of a Nokia 5230 phone, and I bought a BH-103 headset.
    Everything works fine except that the radio application that refuses to start with my bluetooth headset.
    The radio app is requiring a wired headset being connected.
    Is this  expected ? Or is this a bug ?
    any advise please?

  • Trouble listening to radio apps when iphone is in docking station??

    I bought a Phillips combo ipod docking station, cd player, etc. It plays my ipod fine. The makers claimed that is is compatible with iphone also, however when I try to listen to my radio apps on my iphone with it in the docking station so I can utilize the larger speakers, It plays the radio app for a few seconds, and then the ipod player of the iphone will automatically come on and start playing. Is there a way to lock it so it wont come when you are listening to other apps?

    http://store.apple.com/us/product/TS319ZM/A?afid=p210%7Cfrgl&cid=AOS-US-SHOP-Fro ogle

  • I updated my iOS to 7 yesterday. But my music app doesn't show the 'Radio' button as the online videos and Apple website claims. What could be the reason and how to fix it. All other apps, swipe up/down seem to be working fine.

    I updated my iOS to 7 yesterday. But my music app doesn't show the 'Radio' button as the online videos and Apple website claims. What could be the reason and how to fix it. All other apps, swipe up/down seem to be working fine.

    Try to connect in recovery mode, explained in this article:
    iOS: Unable to update or restore
    Before that, back up your device, explained here:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    How to back up your data and set up as a new device
    You can check your warranty status here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • ISangean App doesn't recognize the radio from my iPod Touch 5

    Why can't I get the iSangean App to recognize my Sangean WFR-28 radio?  The same app on my Samsung Note 8, had no problems, so I think it's a iPod issue.  Any experience with this and/or a solution?

    I have never previously seen a post concerning the Sangean WFR-28 radio   in this forum.
    Have you went to Sangean WFR-28 radio's site?
    You can try the standared iPod fixes:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       

Maybe you are looking for

  • Can I get some help with this please

    I got the following error messages from java after running my code. Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 66      at Graph.ChainingHashTable.get(ChainingHashTable.java:76)      at Graph.Vertex.isNeighbor(Vertex.java:123

  • Shape selection operation is not recorded when recording a macro

    Hi frinds in Word 2013, via "record macro" tools, i am writing a macro which performs the following tasks for me: 1- when i select a word, it changes the font size & color & cuts the word 2-inserts a quick part object called "MyRectangle" in the loca

  • How to do file save as

    I am new to Pages. I figured out how to save but "save as" eludes me. I saved as a duplicate, changed the name and saved the new one - it just saved the new name to iCloud - did not give me the option to save in a different location. Any thoughts on

  • Lost contact data

    I want to move with my workflow from iViewMediaPro totally to AP2 via Annoture (hope the update coming soon), but I'm a little bit disappointed of Apple's IPTC management. I wonder what happens with the "people" field in IVMP (which isn't a real IPTC

  • New Bug ? (resouceManager VS mx:NumberValidator) !

    I made a form in a popup window containing some textinput fields that must only take numeric values. (So i am using mx:NumberValidator) If i change the displayed language (i.e. resourceManager.localeChain = ['fr_FR'];)  just before showing this dialo