Is the recovery techniques for RMAN and user managed are different

Hi Gurus,
I want to know the exact difference b/w RMAN and user managed recovery.
Is the difference is too much or if we know the user managed recovery,can we do the recovery using the RMAN...
Regards,
pradeep

user6738165 wrote:
Hi Gurus,
I want to know the exact difference b/w RMAN and user managed recovery.
Is the difference is too much or if we know the user managed recovery,can we do the recovery using the RMAN...
Regards,
pradeepHi Pradeep and welcome to the forum
I'd suggest you to check the Oracle Documentation to find out the difference by yourself
RMAN Recovery Concepts
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmconc2.htm#i1007882
Performing User-Managed Recovery
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/osrecov.htm#BABBBBBB
RMAN has great advantages over the User-Managed techniques. RMAN uses it's own RMAN commands to perform backup or recovery, while with user-managed backup and recovery you use SQL commands
By knowing the main backup and recovery concepts, you can perform both

Similar Messages

Doubt between RMAN and User Managed Backup

Friends,
OS: RHEL AS 3.0
DB: 9iR2
Currently we are taking user managed backup.
rman is in testing(learning) process.
Is it possible to take rman backup and user managed backup of a database one after another?
what i mean is.....suppose, if we configure rman for auto backup at 9pm daily. can i take user managed backup before 8pm or after 10pm?
Am i have to take any precaution's?
suppose, rman is failed can i restore the db with user managed backup?
thanks

Yes, it is possible to perform both user managed backups and RMAN backups.
It is a waste of resources, but it is possible.
You would need to make sure both backups do not overlap each other.
Whether you can restore your database with user managed backup depends completely on the quality of the user managed backup, and whether you have proper (and tested) restore procedures in place.
Sybrand Bakker
Senior Oracle DBA

I'm unable to load my Microsoft Exchange account. Think I'm entering the wrong info for domain and user but haven't figured out the correct inputs...

I think the problem is with my domain and user name information. Does anyone have any suggestions...

I know that when i tried to add a Live/Hotmail account I tried MS Ex but ended up having to forward my Live to my Gmail or just add an IMAP account.

Slides for CCMS and User Management

Hello,
Can anyone recommend some helpful (SAP-owned, standard) .ppt-Slides or pdf.-Slides for the following points:
<b>CCMS
User Management und Disaster Recovery Mechanismen </b>
Thank you very much!
Regards
A. Henke

Hi,
Take a look at service.sap.com/monitoring and service.sap.com/security
/Jesper

Rman And user Managed backup

Hi,
I have following question
User Managed backup
1)when i take user mananged backup i want to know whether DDL operation is permitted or not
2) when i take user mananged backup i want to know whether WE ADD/REMOVE TABLESPACE ??
Rman backup
1)when i take RMAN backup i want to know whether DDL operation is permitted or not
2) when i take Rman backup i want to know whether WE ADD/REMOVE TABLESPACE ??
Regards

Hi,
Please go through the below links to get much familiar with user managed backup's and rman backup's.
Oracle9i User-Managed Backup and Recovery Guide
Release 2 (9.2)
http://download.oracle.com/docs/cd/B10501_01/server.920/a96572/toc.htm
Making User-Managed Backups
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/osbackup.htm
Oracle9i Recovery Manager (RMAN)
http://www.oracle-base.com/articles/9i/RecoveryManager9i.php
RMAN Backup Concepts (11g R1)
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmcncpt.htm
Overview of RMAN Backups (10g R2)
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/bkup001.htm
Oracle RMAN Backups: Pushing the "Easy" Button
http://www.oracle.com/technetwork/articles/havewala-rman-grid-089150.html
Hope this helps you understand clearly about both the user managed backups and rman backups. :)
Thanks,
Balaji K.

What is the difference between Serial numbers and Batch management.

Hi Gurus,
Can anyone explain the difference between Serial Number and Batch Management in breif.
Regards
Ravi

Hi,
Serial number management and batch management are different functions that can be
used in conjunction with each other.
A batch represents a non-reproducible subset
of the total quantity of a material held in stock, which is managed separately from
other subsets of the same material.
For Example Different production lots
(for example, paints, wallpapers, pharmaceutical products), delivery lots or quality
grades of a material.
whereas a serial number is a number that you give to an individual item of material in addition
to the material number, in order to differentiate between this individual piece and all
other items of the material. The combination of material number and serial number
is unique. It is not necessary to use the batch management function to use serial
number management.
Regards
VIjay.

I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

It is the same installer. You can run it as 30-days trial (CC version) and decide later for CC or stand-alone. To license as stand-alone, follow this guide.
If you already have the LR6 license key, you can enter it during setup and do not need to follow the guide.

My LG Optimus Zone is having software issues and I can't access the Recovery Menu for a Factory Reset

My LG Optimus Zone is having software issues and I can't access the Recovery Menu for a Factory Reset. It was working fine until I went to activate it and update the PRL. It turns on, but Freezes on the LG Logo. it currently goes into the LG Download Mode, and When I restore with LG's Mobile Support Tool, It finishes, reboots, and stays at the boot Logo. I was wondering if I can possibly get a replacement phone? This is a little upsetting, as i was hoping to have it transfered from prepaid to postpaid service next month

Who is your Internet Service Provider...?
Do you have any computer which is able to go online wirelessly...?
Have you forwarded any ports on the router...?
Try to adjust the wireless settings on the router and check...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Under the Wireless tab,Change the SSIS(Network Name) to some unique name.Change the Channel Width to 20MHz only and Channel to 11,click on save settings.Under the Wireless Security subtab,Change the Security to WEP and type any ten digit number in key1 as the network security key,click on save settings..Under the Advanced Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Also,for the gaming system,check this link.

Ok guys i need help my ipod touch froze during an update now i put it inot the recovery mode or dfu and it will not reset itself at all it comes up with an error code and says this ipod cannot reset now does anyone have any ideas of what to do with it

ok guys i need help anyone with my ipod it froze during an update now it will not work at all i ahve put it into the recovery mode or dfu and it will not reset it self it comes up with an error message 1603 the number is and says the ipod cannot be reset anyone please help me i have tryed everything googled you tubed everything

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.

What is the best technique for resetting a view?

I was wondering what is the best technique for resetting the initial state of a view?
I am creating a form and want to provide a reset button for the user. I could write an initialize() method that my action handler calls, but I am wondering if the framework already provides this functionality in a more elegant way.
If I write an initialize method, then I have to manually populate my fields with my context mappings in my initialize() code to mimic what happens automatically by the framework the first time the view is called. This seems prone to error since this is duplicating the mapping logic.
Michael

Hi,
Even though it boils down to the same logic, for consistency sake it is good to have the initialization logic coded in the inbound plug method and then to call the outbound plug on reset.This make more sense when you have multiple navigation possible to the same view through multiple inbound plugs.
Else, have an initialization method.
PS: check whether the reset() method of IWDContext make sense. This is helpful when you have remove dynamically added nodes and attributes.
Thanks and Regards,
Sam Mathew

The Registry Settings Used by the itunes drivers for importing and Burning CD's are missing

I get the following error message in the latest version of iTunes on start-up
The Registry Settings used by the iTunes drivers for importing and Burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
I tried troubleshooting from a guide on another apple support page and it worked but stopped the DVD Drive working and I have tried reinstalling iTunes but that failed and I don't know what to do and how to get rid of this error on start-up of iTunes

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

I cant find the recovery HD after erasing and reformatting my 2009 intel imac

Hi All .
Ive spent hours readng through many discussions on the subject but no avail in my problem.
I have an old intel based 2009 iMac , I erased the hard drive through disk utility so I could restore to factory settings.
Then i couldnt find the hard drive or the recovey HD,
I used the old iMac in target Mode on a newer 2011 27" iMac running 10.8.4 and can see the hard drive, so i verified and repaired disk from there.
Then when i turned on the older imac it asked for firmware password.
no chance i could remember as its been a long time since i used.
found a 15" ,Macbook Pro 10.6.3 installation disk and managed to get it to see it after holding the option key at startup .
I noticed though the Macintosh HD and the recovery HD werent there and just the osx 10.6.3 nstallation disc.
so i choose the disc and it gets me to the stage of installing when it goves the error " Mac os X cant be installed on this computer.
gives me the option to restore from time machine backups but all are incompatible as are from different models.
i can get to disk utility but cant do anything from there.
How can i get the recovery hd to be shown again after startup and option key ????
PLEASE HELP

Hi, Where were you booted from to use Disk Utility? Sounds like it wasn't the Restore partition, & you erased the whole Drive instead of just the OSX partition!???
You'll have to use the App Store, look for prchases, re-download 10.8 & install it in Target mode.
found a 15" ,Macbook Pro 10.6.3 installation disk
Gray Discs are machine specific.

I received the following message when iTunes launches: "The registry settings used by the iTunes drivers for importing and burning CD's or DVD's are missing. This can happen as a result of installing other CD burning softwarre. Please reinstall iTunes"

Everytime I connect my iPod Touch (4th Gen) to my laptop, running Win 7 (64 bit) I get the message "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes" I have reinstalled iTunes several times and it has not fixed the issue. I am running ver 10.2.2.12 of iTunes. I HAVE NOT installed any other burning software to my laptop either. I haven't tried uninstalling iTunes and then re-installing it yet. Would that perhaps fix the problem? I've read that many users have had issues with the new version of the software and I was wondering if that might be causing my issue. I'd like to point out that iTunes seems to work after getting rid of the message, but I haven't tried to burn any CDs or put music from a CD to my laptop. Any ideas on how to get rid of the annoying message?
I also am having trouble hooking up with our other computers using Homegroup. I noticed quite a lot of people are having the same issue and hopefully they come up with a fix for that soon.
Thanks in advance.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters

I am unable to install the newest update for itunes and quicktime because of a bonjour error about path not being located

I have windows 7 and I have been trying to install the newest update for itunes and quicktime but I keep receiving the same Bonjour error. I even tried to do it manually and no luck. I also tried to unistall bonjour but it would not even allow me to unistall it either. No matter what I do I get the same error listed below:
The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
I would greatly appreciate any help because this appears whether i am trying to install the updates or remove bonjour to reinstall. I am stuck.
Thank You in advance!!!

The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on 25 June 2010. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

Is the recovery techniques for RMAN and user managed are different

Similar Messages

Maybe you are looking for