Is the Runtime installation of Oracle Client 10.2.0.4 supported with Busine

Hi all,
I have a some queries.
1. Is the Runtime installation of Oracle Client 10.2.0.4 supported with BusinessObjects XI 3.1?
2. Is the Administration installation of Oracle Client 10.2.0.4 supported with BusinessObjects XI 3.1?
3. Does BusinessObjects XI 3.1 use Oracle .NET?  I'm asking this because the Runtime installation doesn't install Oracle .NET.
4. Is there any functionality that is lost from BusinessObjects XI 3.1 if the Runtime installation of Oracle Client 10.2.0.4?
Regards
Kultar P

Hi Kultar,
I do not have any problem with an Oracle Installation and BO XI 3.0. I have a virtual machine which has oracle database 10.2.0.1 and BO XI 3.0.
The CMS repository resides in the Oracle DB. From My Experience I do not have any problem with the two installations in the same machine.
Regards
Ishaq

Similar Messages

  • Forward me the link for installing Oracle Client 10g on Windows 7 64-bit?

    Hi
    Can anybody send me the link for downloading Oracle Client 10g on Windows 7 64-bit?
    Regards

    Arizuddin wrote:
    Actually i installed TOAD for oracle v9.5 on laptop with Windows 7 ultimate
    it gives 'Cannot find OCI DLL: oci.dll'. It seems TOAD for Oracle is a 32-bit only app, which means that it requires a 32-bit Client.
    You might also want to stay away from installing Toad under "Program files (x86)".
    Consider taking a look at Oracle SQL Developer - a very good alternative to the toad.
    http://www.oracle.com/technetwork/developer-tools/sql-developer/index.html
    For other questions specific to Toad, please see e.g. toadfororacle.com.

  • From my session how to find out the version of my oracle client ?

    From my session how to find out the version of my oracle client ?
    Thanks in advance

    Client version?
    BTW, trying all forums?

  • ERROR: The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.

    Hello Everyone,
    I keep getting this when trying to install 0r repair SQL Server 2008 R2 on a SBS  2011 Standard.
    TITLE: Microsoft SQL Server 2008 R2 Setup
    The following error has occurred:
    The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDF039760%25401201%25401
    BUTTONS:
    OK
    the provided link says  "There is no additional information about this issue" i am helpless
    please tell assist.
    Thanks.
    Abdallah.M.M

    Hi Abdallah,
    According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
    Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted.  I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
    then reinstall SQL Server 2008 R2. For more details, please review this similar
    article.
    Thanks,
    Lydia Zhang

  • Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

    Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined  settings to run the cd's and dvd's ?

    A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • How to uninstall oracle components silents using oracle universal installer in oracle client 11.2.0.3.0?

    Hi,
    I have installed oracle client 11.2.0.3.0 silently using the response file with INSTALL type as runtime. I want to remove  'Oracle sql developer' from the installed products. Using Oracle Universal Installer I am able to remove this component in GUI. Please provide me the silent switch to remove this component. I have tried with DEINSTALL_LIST property , but I am getting an error that 'no products selected for deinstall'. Please suggest on this.

    Pl post your OS details
    AFAIK, SQL Developer is not included in the Oracle Client install - it is a separate install. You will have to follow the instructions for uninstalling SQL Developer - check the docs for your specific version of SQLD - Oracle SQL Developer
    e.g. for 3.1, see Installing Oracle SQL Developer

  • Installation of Oracle Client 32 bit on Windows 64 bit

    Hi ,
    I'm trying to install the 32 bit Oracle client (release 11.2.0) on a Windows server with 64 bit (Microsoft Windows Server 2008 R2 Standard, Service Pack 1).
    It's my understanding that this is supported and should work. However, the 64 bit Oracle client (release 11.2.0) is already installed on the server.
    We need the 32 bit client since an older application requires this.
    The GUI for the install of the client starts fine - but when the step "Finish installation" the GUI suddenly disappeares. The logfile of the installation ends
    with
    INFO: Setting the value  for INSTALL_TYPE variable
    INFO: Variable "INSTALL_TYPE" wird auf "InstantClient" festgelegt. Der Wert wurde von der Befehlszeile empfangen.
    INFO: adding the variable oracle_install_NoMigration to command line args table
    INFO: adding the variable oracle_install_RACInstall to command line args table
    INFO: adding the variable oracle_install_WindowsSystemDirectory to command line args table
    INFO: Update the State machine to STATE_INIT_SESSION
    INFO: Creating & Initializing the Session Interface Manager
    INFO: Calling OiicInstallAPISession's prepareForInstallOperations
    INFO: Do the iterator execution till Summary
    INFO: Initialisieren des Installationsbestands
    INFO: Einrichten des Installationsbestands
    I'm executing the installation as a local admin - I've tried the installation with setting the compatibility mode to Windows 2000. No success at all :-(
    Did I get it wrong that ths 32 bit client is certified with this windows version? Does anybody have experience with the same situation?
    Any help will be appreciated!
    Rgds
    Jan

    Are you using separate ORACLE_BASE directories ?
    Oracle® Database
    HTH
    Srini

  • Could not browse pages from IIS after re-installation of Oracle client

    Hi all,
    Unfortunately, I hit a issue today in the morning. I could not browse pages from IIS after I re-installed my oracle client on my machine. Below is the error massage from browser.
    Configuration Error
    Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
    Parser Error Message: Could not load file or assembly 'Oracle.Web, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
    Source Error:
    Line 174: <healthMonitoring>
    Line 175: <providers>
    Line 176: <add name="OracleWebEventProvider" type="Oracle.Web.Management.OracleWebEventProvider, Oracle.Web, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" buffer="true" bufferMode="OracleNotification" />
    Line 177: </providers>
    Line 178: </healthMonitoring>
    Source File: c:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\Config\machine.config Line: 176
    Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.Web, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342' could not be loaded.
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
    When I comment a line for OracleWebEventProvider in health monitoring providers in machine.config, it works fine for me. But, Im wondering what went wrong during re-installation and how do I rectify this issue with out a temporary workaround.
    Please let me know your suggestions in this regards and thanks for the help in advance.
    Regards,
    Kumar

    After I ran the "uninstaller" on the Oracle CD .. there were services still in existance, however, once I deleted the c:/Oracle folder, they were gone. I also re-booted the pc and double-checked, before I tried re-installing.
    Thanks !
    Tammy
    Hi,
    look into services, is there any services is still exist or running with the same name.
    or give any other SID which you have given previously.
    Yogi
    [email protected]

  • Loadjava.bat not available in installation of Oracle Client 11gR2

    I installed Oracle Client 11gR2 on Windows 7. I am trying to load java classes into Oracle database, remotely, to be used as procedures using TOAD. TOAD depends on the Oracle Client to do this. However, loadjava.bat is not installed in Client installation. There may be other files needed as well. As a consequence, this loading of Java classes is not happening.
    What do I need to do to make this work?
    I realize that there is the option of loading these Java classes directly from the server that hosts Oracle Database, but I'd like to do it from a remote client.
    Thanks

    user5370695 wrote:
    I installed Oracle Client 11gR2 on Windows 7. I am trying to load java classes into Oracle database, remotely, to be used as procedures using TOAD. TOAD depends on the Oracle Client to do this. However, loadjava.bat is not installed in Client installation. There may be other files needed as well. As a consequence, this loading of Java classes is not happening.
    What do I need to do to make this work?
    I realize that there is the option of loading these Java classes directly from the server that hosts Oracle Database, but I'd like to do it from a remote client.
    Thankswhich Edition of Windows 7?
    one possible solution would be to install Oracle XE on your system.

  • How to backup up the fresh installation of Oracle Apps R12?

    Hi
    I have done a fresh installation of Oracle Apps R12 on IBM-AIX machine. I would like to know, what exactly do i need to backup either the file system or database. Please let me know in detail. Actually i am fresh to Oracle Apps enviorment but expert in Oracle Database (Core) level.
    Thanks.

    This topic has been discussed several times before on this forum. Please check the following threads for more details:
    Apps Backup
    Re: Apps Backup
    Backup Oracle Applications (11.5.10.2)
    Re: Backup Oracle Applications (11.5.10.2)
    Best Backup Strategy
    Re: Best Backup Strategy
    System Backup
    system backup
    Reommended backup and recovery startegy for EBS
    Re: Reommended backup and recovery startegy for EBS

  • Error 1719. The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. Getting this error while installing the package in the windows 2012.

    Getting below mentioned error while installing a package  in the windows 2012 server remotely through psexec command
    Error 1718. Windows Installer Service could not be accessed.
    The same msi is getting installed local in through when we are doing through manually
    Please help on the same

    Hi Rahulan,
    Would you please let us know current situation of this issue? If any update, please feel free to let us know.
    Just addition, please refer to following threads and check if can help you.
    The Windows Installer Service could not be accessed.
    error 1719 windows installer service could not be accessed ....
    Hope this helps.
    Best regards,
    Justin Gu

  • I tried updating Itunes to the 10.7 version so I cound use my iphone with it but during the final installation a message pops up about something being wrong with a network resource??!! Need Help Please

    I tried updating Itunes to the 10.7 version so I could use my iphone with itunes, but at the final installation a message apppears saying Itunes can't be downloaded because of a wrong network resource. Please help!!

    Which particular .msi file does the message go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

  • Installation of Oracle Client

    I downloaded the Oracle 8 client and am trying to install it. I reach a installation screen but the moment I run the installer it just shuts down without installing the client.
    Can someone please help?

    1) This is a macosx/Jaguar forum, not linux.
    2) what glibc are you using ? The oui binaries are linked with glibc 2.1.3. There is also a similar problem on windows running pentium-4 or xeon chips. In that case I use the installer that comes with v9.2 and with a little luck it also works in your situation.
    Ronald.
    http://ronr.nl/unix-dba

  • Installation of Oracle Client 10.2.0.1 on Windows Vista Business

    I get the error "cannot initiate oci.dll"
    can anybody help?
    yours
    Andreas Umlauft

    Hi,
    Please note that an interim solution has been posted on this Blog:
    http://cshay.blogspot.com/2007/02/getting-ready-for-windows-vista.html
    I am in the process of installing the patchset 10.2.0.3 and perform the client installation.
    Good luck!
    Regards,
    Jesmond

  • Im trying to install Adobe Premiere Elements on Window 8.  The Windows Installer is not working.. some window pops up with an error message and it does not install

    I get the following window pop up after trying to install Adobe Premiere Elements.  After it prompts me to select the language i get this:

    I think I figued it out... But why installations instructions didn't come up when I inserted the disk was very annoying. And because they didn't, Adobe should post th installations instructions somewhere on their support site. Not here now, which is also annoying. 

Maybe you are looking for

  • Amount of data has exceeded maximum limit - Infopath form

    Hello, I am having a problem on O365 concerning an Infopath form. The warning goes like this : " The amount of data that was returned by a data connection has exceeded the maximum limit that was configured by the server administrator"  Solutions exis

  • Lost All FW Ports !

    Hello there, Suddenly my Mac has lost all Fire Wire ports Any advice please will be much appreciated Message was edited by: another new convert

  • Error in chat code

    This is the code that i copied and pasted in my builder .It is showing some errors..This is the code that i saw in the video.It is the working code.Can anyone tell me what's the problem in the code... Code: <?xml version="1.0" encoding="utf-8"?> <mx:

  • Jsessionid issue - web proxy to multiple clusters

    My team has encountered a problem where we have applications from two clusters hosted under the same domain e.g. mydomain.com/app1 and mydomain.com/app2. It seems that when we bounce between the applications that each weblogic cluster will overwrite

  • PGI Error with a 'Plant not defined' message

    Hi all, I'm getting an error message while PGI of a delivery document 'Plant not defined'. Not sure why we are getting this error message in the delivery. Any advice/info will be appreciated. Thanks Gopi Venkatesan