Is the siri down for any one
is siri down for any one
There have been several posts tonight reporting it as being down. It being down for some may not mean it is for others, it's based on multiple factors like location. You're not alone, just wait it out.
Similar Messages
-
In logic X I am trying to normalize but the track and file option in the edit window is not there at all just the drop down for pointer eraser etc. Any ideas? Thanks!..
Total life saver. Thank you
-
When trying to download an APP, it's requesting setup for answers to 3 security questions and it hangs up the iPad when clicking the drop down for the questions...any ideas?
Had to do a hard reboot on the iPad and we were able to get the questions to pop up. Now it's just slow downloading the apps.
-
Just downloaded OS X Lion. Now, there's no curser bar to scroll up or down for any of the pages I access....if I use the keyboard arrows for up/down, there is a temporary scroll bar, however it disappears after a few moments. Help!!
Go to System Preferences->General. There you can set how you wamt thescrool bars to behave.
If you want to see the scrool bars all the time select Always -
Experiencing extreme slowness of the Admin console for any function in Weblogic 12.1.1.
Configuration is Admin server plus 28 JMS servers - no nodemanager - all on the same server.
When I bring up Admin console alone response is quick but bringing up JMS servers one by one will slow it down.
I did not experience this problem when this configuration was in Weblogic 9.
Memory configuration is -Xms4g, -Xmx4g.
Any ideas what else I should check ?
Thanks.Hi,
Collect multiple thread dump at the interval of 10 sec and check what the threads are doing .
Thread dumps will give you some information about why there is a slowness .
Ways to collect thread dumps
Thread dumps & Ways to take thread dumps - weblogicexpert
Hope it helps -
My ipod won't let me connect to wi-fi, won't let me restore or reset it, and it keeps telling me i knew a passcode for any one and I never set a password up. How do I fix this? Says try again in 6180146 min. my passcode setting is off, but restrictions are on. Very frustrated. please help
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I have an ipad 2 white, this guy said that this ipad is having the siri on it on the iso 6 mine is 6.0.1 and I haven't got the siri yet why any suggestions.
Siri is not available on the iPad 2.
iOS 6 Which Software for Which iDevices...
http://support.apple.com/kb/HT5457 -
I AM NOT GETTING THE TAX TAB CAN ANY ONE HELP ME
HELLO I AM NEW TO SAP SD WHILE CREATING THE CUSTOMER I HAVE NOT GOT THE TAX OPTION CAN ANY ONE HELP ME
Hi
1.Go to OVK4(check tax relevancy data for customer master) and put your tax calculation type eg. MWST-0(tax exempted)
MWST-1( full tax)
2.Go to OVK3(check tax relevancy data for material master)
and put your tax calculation type eg. MWST-0(tax exempted)
MWST-1( full tax)
3.Now goto OVK1 and assign country IN to this condition type.
4.Goto OX10 and assign your plant for tax determinaton.
hope it helps out
plz. drop poins in success.
krishan kumar rai -
When I press the play button for any music it switches back to pause immediately. Jim
When I press the play button for any music or video it switches back to pause immidiately
Have you tried giving your iPad a reset? HOld down the sleep and home keys until you see the silver apple. Let it reboot and try again. Sometimes when there's a glitch resetting can clear that up.
-
I 've had the newest iPad for about one week. Just started using face time..why does face time camera take pixelated pictures? The iSight camera pictures look fine.
Kathleenfromks wrote: ...why does face time camera take pixelated pictures? ...
Because something is wrong.
You will need to troubleshoot to find out what needs to be fixed.
One of these suggestions may resolve your trouble.
FaceTime (and other video) quality problems can be caused by problems at either end of the connection. Unless your video callers' FaceTime connections work properly with everyone else but you, both parities to the video call should consider these possibilities.
(1) Restart your iPad and test again. Sometimes a simple restart fixes things.
(2) Use a fast broadband internet connection for best possible FaceTime video.
Broadband speed matters at BOTH ends, so you use something like http://speedtest.net/ to test both ends of your video connections.
Speeds less than 300 Kbps (up and down) at both ends are unlikely to give best results.
(3) Try from a different wi-fi connection.
If the problem is ONLY at your current location, restarting your internet connection may help. Shut down your iPad or turn Airplane Mode "on". Then check your cable connections, restart your modem and wireless access point, reconnect iPad to the wi-fi, and test again.
If the problem remains but ONLY at your current location, there may be a problem with your internet service. Contact your ISP for help.
(4) Always use as much light as possible for best images (including video) from your iPad.
Message was edited by: EZ Jim
iPad2 iOS 5.1 -
my ipod touch is frozen and it has a picture of a usb cable and the itunes icon, can any one help me??, my ipod touch is frozen and it has a picture of a usb cable and the itunes icon, can any one help me?? anything would be helpful!
What exactly happen? If it started and froze, at what stage did it freeze?
Maybe this:
Hang during restore process
Following Troubleshooting security software will frequently resolve this issue. This issue can be caused by the default packet size being set incorrectly. There may be third-party software installed that modifies the default packet size in Windows by inserting a TcpWindowSize or MaxGlobalTcpWindowSize entry into the Registry. Contact the manufacturer of the software that installed the packet-size modification for assistance in adjusting this TcpWindowSize values. Typically the default packet size is modified by 3G cellular network card software, ISP communication software, or Internet speed download optimization software. There are legitimate reasons to change the TCP/IP packet size and not use the Windows default settings (for example, network traffic optimization, home/broadband optimization, enterprise app optimization such as database apps, Exchange, and more). Deleting the "TcpWindowSize" or "GlobalMaxTcpWindowSize" entries in Windows Registry could affect the system's performance with other apps or on their network connections. Deleting the customized TCP/IP settings may require the reinstallation of any third-party applications that had modified the TCP/IP settings from the Windows default settings.
There are two ways to resolve this:
You can follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) , or follow the steps below to manually find and remove TcpWindowSize and MaxGlobalTcpWindowSize entries from the Registry.
For Windows XP, Windows Vista, Windows 7: Go to the C:\Windows folder and launch regedit.
Go to Edit > Find.
Search for "TcpWindowSize" entries. There are typically multiple entries of TcpWindowSize/GlobalMaxTcpWindowSize spread throughout the entire Registry. If "TcpWindowSize" exists, one or more third-party applications have changed the user's default Windows settings for TCP/IP.
Go to File and select Export. This step will export a copy of the Registry that can be used as a backup of the original settings.
Delete the "TcpWindowSize" entry.
Search for the next "TcpWindowSize" entry and delete each one until the Registry no longer has any "TcpWindowSize" entries.
Close Regedit, restart the PC, and test.
If you are uncertain as to why these registry entries exist and the PC is a business computer, contact your network administrator and determine what values TCP/IP can be set in their Windows Registry setting so that the PC can update or restore an iOS device rather than deleting the "TcpWindowSize" entry.
If editing the registry does not resolve the issue, restoring on a different computer that did not install the communication software is the step most likely to resolve this issue.
I would first try restoring on another computer. -
Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani SankaranHi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh -
What are the different methods to find the user-exit for any requirement?
Hi Everybody,
What are the different methods to follow to find the user-exit for any requirement?
Thanks & Regards,
Nagaraju MaddiThe following program search all the user exits involved with a T-code:
Selection Text: P_TCODE: Transaction Code to Search
Text Symbols: 001 - Enter the Transaction Code that you want to search through for a User Exit
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP® User Exits exists.
*& Tables
TABLES : tstc, "SAP® Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP® Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
* Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
* Find SAP® Modifications
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN. -
appletv - the airplay window on iphone 4gs and ipad gen2 does not show the mirroring slider? any one know what im doing wrong?
ccooper52
check out the tips and video at the bottom of this link and see if any of it helps
http://www.allabouthomeelectronics.com/apple-tv-airplay.html
Apple policy requires we mention we might benefit or profit somehow by your visit
please let us know if this helped -
hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you
hey Sally,
Can you elaborate on the ilab and what you are trying to do? I have found this page to explain error 404, but I am not sure if it directly applies to you
http://digital.ni.com/public.nsf/allkb/D0998D3734926FA08625782300016E40?OpenDocument
Regards,
A. Zaatari
National Instruments
Applications Engineer
Maybe you are looking for
-
How do you move icons from one page to another?
How do you move icons from one page to another?
-
MSI GT 70 ONC: Stereoscopic 3D option doesn't show up in the NVidiaControl panel
Hi, I have MSI GT 70 ONC Laptop with NVidia 670M (2GB) graphics card. I also have Sony Bravia 3D TV. I can play 3d movies on laptop and can watch them on my 3d TV using HDMI cable fine although my laptop doesn't have 3d display. I am trying to use my
-
Ipod charges, but it wont appear in itunes and music wont go into it
what do i do????? its a second generation ipod nano, when i charge it the charge icon shows at the right hand top corner, but the ipod would say do not disconnect and it wont do anything.not only that when i connect it itunes does not pop up. i have
-
Cannot play audio. website saysI should update media player for Firefox.
http://www.3aw.com.au/blogs/3aw-sport-blog/ipl-fixing-arrests-taits-name-cleared/20130516-2jp58.html This is the webpage I am trying to listen to the audio file.
-
just bought an original airport card for my emac and installed it. it shows i get a full signal to my wireless network in the menu bar. however when i try to open safari i get an error message saying can not connect to server. is ther any software or