Is the slow SATA HD issue still unresolved in latest Bootcamp?
an earlier post by kkapoor indicated lack of support for SATA drives in Win XP, and indicated a fix to a now dead web site. Is the slow SATA still an issue? Will it impair running games in Windows mode( the only use I have for Windows)?
I believe this issue was resolved by the Mac Pro SMC Firmware Update.
Similar Messages
-
N97, issues still unresolved after software update
I was happy to see the latest software update from Nokia for N97 hoping it would have solved the issues but I was very disappointed experiencing the same problems that I was getting before and worst part was new problems have also
been experienced.
Old problem which is still not solved
It is still impossible to get the phone working if it switches off by battery getting fully drained. The battery doesn't start
charging even if you put the phone in charging for 24 hours. The charging light blinks but the phone doesnt charge.
New problem after software update
Even if the phone is put on charge for 24 hours, it doesnt get fully charged. Infact the battery indicator doesn't climb up after 2 points and after using the phone for a small time, it says battery discharged and phone switches off.
I have always been stuck to Nokia phones since I've started using handphones but am having the worst experience with
this N97. God knows when the Nokia people will wake up and provide a final solution to this.Try pulling the battery and leaving it out for 5 minutes. Put back together and commence a recharge. Se if that helps.
Nokia N8 on O2-UK
Firmware 022.014 -
N80 Bluetooth issue still unresolved : WORST NOKIA...
I am tired of Nokia N80 problems. I was one of the first buyers. ( early buyer = alfatester) After two firmware upgrades and three months bluetooth connection is still absolutely unreliable. Soon this phone will be out of date. Waste of my good money. Lisperit
02-Aug-2006
10:07 AM
aumsu wrote:
1. Holux / GPSlim236 bluetooth
www.holux.com' target='_blank'>http://www.holux.com' target='_blank'>www.holux.com
2. from the site:
Input/ Output Interface:
I. Compatible Bluetooth Serial Port Profile (SPP), Version1.1 and class 2(up to 10 meter range).
3. what bluetooth profile is?Message Edited by aumsu on 02-Aug-2006
10:10 AM
ok, i checked this out.
the holux device only uses the serial port profile and bluetooth specification 1.2.
however, the also supports the serial port profile 1.1 - so there should be no problems at all with this.
the only other thing i can think of is the gps device is disconnecting the phone or dropping the connection. it would be good to hear from someone who owns the nokia gps device to see if the same thing happens.
sorry i couldnt help more -
Palm Centro GSM Unlocked freezing issues still unresolved?
Hi, I'm one of the many many (yes, we exist and we ARE MANY, even if Palm keeps ignoring us) unhappy Centro owners that purchased a smartphone that (ironically) doesn't work as a phone... I'm writing from Mexico and I bought a Palm Centro with Telcel.
I don't think it's necessary to again describe the problem because it's been discussed a lot here and in other respected and popular Treo/PDA forums... just google "Centro freeze" and you'll see for yourself.
I just wanted to know a couple of things:
1.Is Palm ever going to adress this issue as an official bug and offer a ROM/Firmware update solution or are they cowardly going to turn they're backs on us?
2. Has anyone suffering from this issue tried the custom ROM update offered by some guy at TreoCentral and did it work?
3. Flashing and/or changing the ROM of my quasi-phone voids warranty?
I hope someone can help us, the once satisfied and loyal Palm users now turned into desperate postin/ranting machines...
Post relates to: Centro (Unlocked GSM)Since this is the offical forum of Palm, I and many other Centro users would like an offical answer on this, please.
-
My Billing Issued Still Unresolved
Now we are going on two months of me not getting the credit that was promised to me. The last rep I spoke to told me it would be a couple of days and now we are going on a month. I also noticed my plan is now $10 higher than the plan I signed the contract for. How could I be going through so much just for internet and cable that I am barely home to watch. I have to divert time to solve these billing issues. Please fix this, I am not a hard guy to please but I do not plan on giving away money based on glitches.
After trying for hours I think I found the problem. I saw that Geert is a Dutch name. I am Dutch as well so it had to do something with the language selection. I changed language to English by choosing United States as continent on the bottom left.
It fixed to problem for me
This is a bug @Adobe
Please fix it.
Thanks! -
Keyboard issue still not fixed with Bootcamp 3.1
It appears that bootcamp 3.1 did nothing to solve the most annoying issue I face. Everytime I unplug my Mac keyboard from my MacBook Pro, and then plug it back in, bootcamp reverts the keyboard back to mapping the function keys using the apple standard regardless of the setting in the bootcamp control panel.
So everytime I unplug/plug-in the keyboard (which is a lot during the day given my job) I have to open the control panel, uncheck the "Use function keys as standard function keys" checkbox, click apply, then check the same checkbox again to re-enable it and click OK.
I've actually become quite used to doing this, but it's still annoying nonetheless.
I'm wondering if there is no way to fix this. Maybe it's a USB thing. Maybe it's a firmware thing in the apple keyboard. Who knows.
Apple, I have posted several times and have never had a response. It would be nice to hear something from someone on the issue.
Thanks.Dear Deputy Dwane T.,
Hopefully this will help solve the constant setup problem. I found a solution for what may be a similar problem, but it was with the keyboard in OS X rather than in Windows. The problem I had was that I would start up in OS X and then connect the keyboard. I then would get a keyboard setup "wizard", and this problem would happen each time I connected the keyboard. I found that if I would start the computer up with the keyboard first connected before startup, then go through the keyboard setup, and then restart with the keyboard still connected, after that I never would get the setup stuff again. Now I could connect the keyboard at any time before or after startup, and the keyboard would be recognized properly. As for the mis-assignment of the key positions, is there no way to reassign these in the keyboard control panel item in Windows? I see that under the Control Panel "Region and Language" item, if one chooses the tab entitled "Keyboards and Languages" and then the "Change Keyboards" button, followed by the "Add" button, there is an option for "United States-International (Apple)". Does that keyboard layout solve the problem?
Sincerely,
Wilson -
I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!
iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings ( http://support.apple.com/kb/TS1490 ) and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I've Downloaded twice ''Additional Contents'' but the issue is still unresolved ( '' EXS 24 instrument ''steinway Piano.exs '' Audio file '' stw per v1 024.AIF '' not found)
Please Help"Additional Contents" I don't even know what that is? What app is it for?
-
Good morning I am confronting serious problems with my Macbook pro 2013, that is runing to slow, even when I am writing this email is running with some kind of delay. I upgraded the memories to 8gb but still running slow . Please let me know what I can do to solve the problem. Thanks in advance. Fernando
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed '/^ *$/d; s/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/\(.*: \)\(.*\)/ \(\2\)/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec bash
in the window and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If it happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Upload Increased to Match Download Speed -... "I am still on the Slow Escalator"
Have had FiOS for quite a few years and love it. Most recently, my internet was upgraded to give me matching 75 MBPS upload speed. However, since receiving the upgrade my service became problamatic. I DJ via SAM Broadcaster and my stream was cutting out quite a bit because SAMS was sending data (Upload) faster than my internet service was sending. I broadcast at 192 kbps and because of problems had to back it down to 128 kbps because of the slow upload. Before the upgrade, my internet speed was 75 MBPS Download and 35 MBPS Upload. While it was 35 MBPS my upload speed averaged about 30 MBPS. However, after the upgrade my upload speed never gets close to 30 MBPS. It is sporatic ranging from 1 MBPS to 15 MBPS. All of this of course is wired testing direct to the Advanced FiOS Actiontec router. Did all the usual testing... Factory reset the router, changed ethernet cables, tried testing with a couple difrerent laptops and same result. I even did a self reboot of the ONT by powering it down, disconnecting the battery, then 20 min later powering back up. Once I did what I know, of course I contacted Verizon via Chat Support. They rebooted ONT, factory reset the router, had me run the optimizer etc. Did multiple tests and could not get over 6 MBPS upload. They worked with FiOS Network and did a few things. Whatever they did seemed to put me up to around 15 MBPS when I did speed tests. Of course, that was still not acceptable since I was provisioned for 75/75 service. So, they setup a dispatch. Today the FiOS Technician came out and did all the same testing. They connected directly to the ONT with a device and confirmed the same test results. That was a relief because it ruled out my computer, wiring, router, etc..etc... The FiOS Tech replaced my ONT and BHR. Once all of that was completed, retested. After multiple tests, upload was still running in the 15 to 20 MBPS range. They engaged the FSC and worked with a NT. They tried to put the service on what was called "Dummy Cross Connects" and this did not make any difference. The technician indicated it was being referred to In Home Network (IHN). After the technician worked with IHN, they ended up re-initializing the PON card my service was provisioned to. After that happened, my upload speed increased to over 50 MBPS which I could live with............ except, two hours after the technician left my upload speed has dropped back down into the 20 MBPS range. Unfortunately, the problem has not been resolved. Any suggestions from this forum would be appreciated.
Hi budz4u,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal. -
I have a iphone 4s, it died and has been on the charger for the last two days and still wont turn on. How can i fix this???? condition of phone is not the best and was having issues staying charged to begin with but never NOT came back on. I've tried the holding of the home and power button but still nothing
iOS: Not responding or does not turn on - Apple Support
try this but maybe terminal if no result -
I had this same issue with Seamonkey. I have about 4700 names in my address book. When replying to an email, or creating a new email, the auto email lookup function is very slow and unresponsive. It will generally take 10-20 seconds before it starts to work. Since the update to ver 31, now all my collected email addresses are coming up all red color. It is like all history is gone. It doesn't recognize that these email addresses are in my address book or something...thank you.
The spurious red addresses is a known bug:
https://support.mozilla.org/en-US/questions/1012002
while the slow operation of autocomplete is probably due to a new feature, that may become a bug:
https://support.mozilla.org/en-US/questions/1011952 -
So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase the hard drive and do a reinstall. Since I have a recent backup this seemed like a good enough option. They were kind enough to send me a copy of the snow leopard disk to do the install since we couldn't get it to complete through the disk utility. Not sure why, since it says we are fully connected, it just never completed.
Anyway, so now that you have the background here is the new issue. The macbook pro keeps spitting out the disk I'm trying to install from. Disk utility and using the 'Startup Disk' function from the apple menu doesn't read the disk.
Can anyone suggest a solution to this vexing problem?
Thanks in advance.Jeremy.Laurin,
have you tried agb76’s approach here? -
"I did fresh restore, reset all setting and reboot the issue still there. I hope Apple don't forget us to solve this issue soon
Oh I've found it meanwhile! The is a 2nd post! So never mind this one! I think lawyerhusain understood he has to let Apple know, if he wants them to know and the technical thing will continue with the 2nd post!
-
I want to resolve the payment issue still pending .But I don't know what issue remains to be resolved by me? Unless I know the details of the issue how shall I resolve it
Apple is not here. Apple does not answer questions here. This is a user to user tech support forum, no ne here would have any knowledge of your personal account details or a financial dispute that you may have with Apple.
Mac App Store Support -
http://www.apple.com/support/mac/app-store/
iTunes Support -
http://www.apple.com/support/itunes/
Maybe you are looking for
-
I just updated my iTunes software and have a lot of problems... 1. The sidebar option is gone. I LIKED the sidebar and it was easier for me to navigate that way. 2. Also no lists? I hate the icon way to view it. It makes my eyes go wonky and I have a
-
I've been through similar problems before and used the .xml file to restore the library, but is a better way of just changing the drive pathways in iTunes so it doesn't have to rebuild everything from scratch? I'm using a PC with Windows Vista.
-
Angry birds seasons now on N8 : )
So wanna thank Nokia and Rovio for making this available ..was not a happy bunny last week when i saw it available on other formats.My N8 is a much happier place now : ) Its what the mobile gaming is all about, fantastic intuitive graphics, great sou
-
Anyone using TAW/custom/report.xml or custom.xml
Oracle's out of the box configuration for the custom.xml and report.xml appears to be commented out and has no bearing on the TAW application default functionality. Is custom.xml for some type of third party integration? Is report.xml for third party
-
Cisco LMS Prime: Device Center does not show Port statistics for Routers
Hello, i am wondering why the Port Statistics for Routers are not showing in the Device Center Port Status Section. Is this normal behaviour? thanks Alex