Is the summarize command (i.e. Autosummarize, ToolsAutoSummarize) available in MS Office '13

Hi
I've got a couple of 100+ page documents in which a summarizing tool would be helpful. I know there was one in MS Word 2007, and one currently available for MS Suites on Macs (like my employer's MS Suite from 2011 on his MacBook Pro).
That said, I cannot find it on either MS Word 2010 or 2013.
Any suggestions?
Thanks!

Apparently removed in Word2010, and, when MSFT remove a feature in a version, that usually means it doesn't return in later versions..
https://technet.microsoft.com/en-us/library/cc179199.aspx?#BKMK_Remmoved
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

Stumped-using the summarize feature in Preview with Automator

I'm scratching my head on this one. I am trying to create a workflow that basically does the following:
Find designated files
Open with Preview
Run the Summarize feature within Preview
The "running the summarize" feature is obviously not one of the pre-made actions within Automator, but I can't figure out how to do my own.
Any ideas or places I can go to read up more on tweaking automator?

The fcanalyzer command only works to monitor traffic from the port to the internal addresses on the switch, such as the fabric controller or name server. It does not intercept traffic traveling from one external port to another. (Except in the obscure case of a limited number of Fabric commands when IVR is in use.)
When I use the fcanalyzer command, I just tell it to capture everything, regardless of source, destination, FCID, whatever. Unless you have a fairly unstable fabric, this will not produce an unreadable mess. (It also has the advantage that it will capture both sides of a FLOGI. Filtering by FCID will not.)
If you want to "sniff" all the traffic, you will need to use a SPAN port and a Cisco Port Analyzer Adapter (the cheap option), or if you need to monitor more bandwidth than that box can handle or work on a lower level, you will need a XGig analyzer from Finisar. (the not-so-cheap option)
Peter Mescher
IBM Systems Group, SAN Support

Applescript Summarize Command - how to process PDF files?

I'm stuck in applescript...I'm putting together an applescript that reads a set of PDF files in a folder and returns each PDf file summarized using the applescript summarize command.
Can't ssem to wrap my head around the logic needed....Any help is much appreciated!

I come close but need more help
on run
    choose folder with prompt "Which file would you like size calculated?"
    open {result}
end run
on open user_Choice
    tell application "Finder" to set xx to every file in item 1 of user_Choice
    repeat with a_File in xx
        set tot_size to size of (info for user_Choice)
    end repeat
    display dialog "file size" & size of (info for user_Choice)
end open
--size of (info for the_file)

The problem I have since I upgraded to Mavericks version 10.9.1 The problem appears only with Mail not with other programs, not even with my browser. When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command to e

the problem I have since I upgraded to Mavericks version 10.9.1
The problem appears only with Mail not with other programs, not even with my browser.
When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
As I have a problem with my eyes, This is a serious matter for me.
When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.

Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

How do I use the a command from a .dll with labview?

I want to use for example the M8784Open() command to control an M8784
photon counter. I know how to place a call library function node
but don't know where to go there. The user manual for the photon
counter has the following explanation of the M8784Open() command but I
don't know how to use their advice in labview!
7-3-1 M8784Open( )
Declaration HANDLE M8784Open( BYTE Board );
Parameter
BYTE Board
Specify the board to be used: M8784_MASTER or M8784_SLAVE. Specify both
when making 2-channel measurements simultaneously. It is not possible
to specify M8784_SLAVE only.
Return value A handle for the M8784 is returned when the function has succeeded..
INVALID_HANDLE_VALUE is returned if the function has failed..
Explanation Calls a handle to allow the M8784API.dll to use the M8784.sys driver.
Hereafter, specify this API’s return value (handle) when using other APIs.
When quitting M8784 operation, call up M8784Close( ) to cancel the driver.

You need to find out the equivalent number of the parameter. Somewhere in your documentation, or inside a file (for example, a header .h file in C/C++) you will find the definitions of each parameter.
For example, M8784_MASTER may have the value 1 and M8784_SLAVE the value of 2. You already know that it is a BYTE, so it will be a number of type U8 in LabVIEW. You need to find the exact values.
Probably, by value "A" it means the hex number "A", which is 10 in decimal. You need to find that in your documentation.
You also need to find the type HANDLE. It can be a BYTE, etc. Once you know that, find the value of INVALID_HANDLE_VALUE, so you can test for the error.
Most of this information can be found in the document Using External Code in LabVIEW. Check your help file, or check this link.
Regards;
Enrique
Message Edited by Enrique on 09-29-2005 10:36 AM
www.vartortech.com

Custom SharePoint 2010 designer page throws "The data source control failed to execute the insert command" exception while adding the new item after the August 13, 2013 CU has installed

We have the SharePoint Server 2010 with SP1 environment on which the custom SP2010 designer pages were working as expected before the
August 13, 2013 CU has installed. But, getting the below exception while trying to add the new item after the CU has installed.
Error while executing web part: System.NullReferenceException: Object reference not set to an instance of an object.     at Microsoft.SharePoint.WebControls.SPDataSourceView.ExecuteInsert(IDictionary values)     at
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65 w3wp.exe (0x1240)                       0x1300 SharePoint Foundation
Runtime                       tkau Unexpected Microsoft.SharePoint.WebPartPages.DataFormWebPartException: The data source control
failed to execute the insert command. 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc    at Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex)     at System.Web.UI.DataSourceView.Insert(IDictionary
values, DataSourceViewOperationCallback callback)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit()     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e)
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean
inclu... 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65* w3wp.exe (0x1240)                       0x1300 SharePoint Foundation
Runtime                       tkau Unexpected ...deStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
I have tried changing the "DataSourceMode" as below, now the insert command is working, but update command is not working.
<SharePoint:SPDataSource runat="server" DataSourceMode="ListItem" />
Also, the lookup dropdown fields are displaying the value as "<a href="Daughterhttp://cpsp10/sites/Employees/_layouts/listform.aspx?PageType=4&ListId={8F62F444-FB6A-4F03-9522-C4696B45DCD1}&ID=10&RootFolder=*">Daughter</a>"
instead of only "Daughter".
Please provide the solution to get rid of this issue.
Thanks
Ramasubbu

Try below:
http://social.technet.microsoft.com/Forums/en-US/ae910269-3a0c-4506-844b-e8bc89d95b71/data-source-control-failed-to-execute-the-insert-command
http://blog.jussipalo.com/2012/01/sharepoint-2010-data-source-control.html
While there can be many causes for this generic error message, in my case the first parameter or ddwrt:DataBind function inside the SharePoint:FormFields element was
'i' and I was working with an Edit Form. Changing it to
'u' as it was with every other FormField fixed the issue.
<SharePoint:FormField runat="server" id="ff1{$Pos}" ControlMode="Edit" FieldName="Esittaja" __designer:bind="{ddwrt:DataBind('u',concat('ff1',$Pos),'Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Esittaja')}"
/>
Explanation:
DataBind operation type parameters (the first parameter) are listed below:
'i' stands for INSERT,
'u' stands for UPDATE,
'd' stands for DELETE.
http://webcache.googleusercontent.com/search?q=cache:d9HHY4I7omgJ:thearkfloats.blogspot.com/2014/03/sharepoint-2010-data-source-control.html+&cd=4&hl=en&ct=clnk&gl=in
If this helped you resolve your issue, please mark it Answered

Report with two Command is empty if one of the two commands returns no data

Hi all,
I have a report with two Commands not linked together.
If ONLY one of the two Commands returns no data, the full report is empty (although the other Command returns data).
I'm using Crystal Report 2008 and the CRJ 12.2.205
Have an idea?

Hi Ted,
how can I solve the problem, please? It is important.
If I can help yourself, the problem is appeared in many reports since I updated the library (the old library version 11.8.4.1094 works fine with all). I'm waiting for your answer, please.
Thank you very much.

How to make the print command wait until form is rendered.

This is an ongoing issue that so far I haven't been able to figure out how to fix, so I'm hoping that someone will have a good idea or work around. I'm working in LiveCycle Designer ES v8. using JavaScript.
I have to include a feature that allows the user the choice to print out a dynamic form to fill out by hand. So I've created a button that asks if this is what they want to do, if they answer "Yes", then several things are scripted to happen. All data is reset, some subforms and pages are made visible, while other subforms are hidden, and text fields are expanded. This causes the form to expand from one page to 15 pages. Then it prints using this command:
xfa.host.print(1,
"0", (xfa.host.numPages -1).toString(), 0, 1, 0, 0, 0);
The problem is that when the print dialogue box appears, the Print Range is always set to less than the total number of pages. It looks like that the print commands fires before the form has completed rendering. This isn't a big deal since the user can click to set the Print Range to "All" which will print all 15 pages. The problem is that most people don't read the dialogue box. They click "okay" and end up with their form cut off. Then I get phone calls that my form doesn't work.
Is there anyway to delay the print command until everything has finished rendering? Or set the Print Range to always go to "All"?
Thanks in advance for your help with this.

It sounds like you'd be fine if you just separated the print function from your "Yes" button. It will require a 2nd button click from the user but that would be the only inconvenience.

The Print command takes ages to bring up the print window

When I use the print command, I get the spinning disk for about 5-7 seconds before the expected print window displays. This has been happening for the last month or so, but don't ask me what I did to make this happen I update and download applications all the time. Any help will be appreciated. If it is of any relevance, my list of printers has 4-5 of them but this was always the case and in the past the print window was coming up fast.

A couple of ideas.
Have a look for HP preference files in the system library under 'preferences' and delete them.
Double check your driver is the right one for your OS and machine.
Reinstall the software that came with your printer. NB: Install all the software that came with your printer. It's easy enough to remove the garbage apps afterwards.
Give these a try and post back.

In Contacts version 8, how can I print ALL information in each individual card? When I select the print command the only thing printed is the name and address. I need phone number(s) and all other information in the cards.

In Contacts version 8, how can I print ALL information in each individual card? When I select the print command the only thing printed is the name and address. I need phone number(s) and all other information in the cards. We enter various pieces of data, other than the standard name address & phone numbers and we print all information on each card so it fits in a 5x7 inch loose binder. We have used InTouch software for many years and it has served us extremely welll, however, the publisher (The Prairie Group) has not, and apparently has no plans to update their software to be compatible with any Mac OSX OS beyond 10.6. Any help will be appreciated!

You can select what you want included in a list format. In the Print command from Contacts, click the Show Details button. Then in the Style pulldown menu select "Lists" and there you'll be able to select what you want included. You can also select what you wish included if you select the Pocket Address Book style.
If neither of those options will work for you, then you will need to look to third-party software. Here's one possibility that seems to get good reviews:
https://www.macupdate.com/app/mac/15485/labels-&-addresses
I haven't done more than try it to make sure that it works with OS X 10.9's Contacts, which it does, but you can download their demo and try it yourself.
Regards.

I have a Windows 8.1 machine. I used a projecteor a while back in a Power Point presentation. Now my menus for Adobe are very small and hard to read. The print command is so compressed that I cannot read or use it. How do I fix this problem?

I used a projecteor a while back in a Power Point presentation. Now my menus for Adobe are very small and hard to read. The print command is so compressed that I cannot read or use it. How do I fix this problem?

There is no application called "Adobe" - you are either working with Adobe Acrobat or the free Adobe Reader. Open up the preferences for the application (Edit>Preferences), then go to the "General" category and modify the settings for "Scale for screen resolution". You will have to restart the application after you do that. Does that fix your problems?

How to execute stored procedure in the SQL Commands page

i'm oracle express edition newbie :) i have this stored procedure. it not belong to a package.
create or replace procedure "LIST_MEMBERS"
("MEMBER_CUR" OUT SYS_REFCURSOR)
is
begin
OPEN MEMBER_CUR FOR
SELECT * FROM members;
end;
now, in the SQL Commands page, how to run the stored procedure and return the records. i do this:
begin
execute list_members();
end;
but i'm getting some errors. just need some immediate help :) thanks!!!

Example of using a ref cursor:
SQL> ed
Wrote file afiedt.buf
1 create or replace procedure open_cur(c IN OUT SYS_REFCURSOR) is
2 begin
3    open c for 'select rownum rn from dual connect by rownum <= 10';
4* end;
SQL> /
Procedure created.
SQL> ed
Wrote file afiedt.buf
1 declare
2    c     SYS_REFCURSOR;
3    v_val NUMBER;
4 begin
5    open_cur(c);
6    loop
7      fetch c INTO v_val;
8      exit WHEN c%NOTFOUND;
9      dbms_output.put_line(v_val);
10    end loop;
11    close c;
12* end;
SQL> /
1
2
3
4
5
6
7
8
9
10
PL/SQL procedure successfully completed.
SQL>

I can't print any web page. after the print command, it wants to save xps files. on cannon printer. vista system

can't print any web page. after the print command, it wants to save as a xps file.
== This happened ==
Every time Firefox opened
== after up grade to 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 1.1.4322; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)

I found that Firefox/XPS had deleted all printer driver setups except for the XPS connection. I had to reinstall my printer connection in order to have that selection present in the printer dialogue box.

We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF on a

We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF on a printer."C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" /T "\\<Application Server>\Report\<TEST.PDF>" "<Printer Name>". Current Situation: The above command line parameter when executed is working as expected in a User's Workspace. When executed in a command line on the Application Server is working as expected. But, the same is not working while executing it from Deployed environment.Software being used: 1. Adobe 11.0 enterprise version. 2. Webshpere Application Server 8.5.5.2. Please let us know if there is a way to enable trace logs in Adobe Reader to further diagnose this issue.

This is the Acrobat.com forum. Your question will have a much better chance being addressed in the Acrobat SDK forum.

Questions regarding using the .monitor command to retur a animated image and we would like feedback to a designed webpage that is monitoring a 5kW windturbine:)

I'm embedding a front panel image in an existing HTML dokument. I would like to use the command .monitor in the URL together with the refresh command so the VI automatic will reload every 20 secund. This actual work, but simultaneous I want to have the possibility to refresh manually so I don't have to wait 20 sec before new values is shown in the display. Is this possible to do?
Another question: Since the real time display updates 1-2 times a secund the command .monitor is used to get a animated picture of the Real Time Display.
There are several ways to add animation on to web pages. The techniques used h
ere are the �server push� and �client pull�which makes the browser repeatedly reloads a changing inline image to provide crude animated sequences. This is not the most efficient way as this result�s in an image being re-transmitted for each frame of the animation. The command .monitor with the attribute refresh and lifespan in the URL trigger this �server push� and �client pull� techniques.
I use this automatic refresh uploading of the display so that it each time shows different values, is this called crude animation?Then I'm wondering what I'm suppose to use the command lifespan to?I can't see the use of it in my display.....?
link to the webpage so you can have a look at the display:
http://134.7.139.176/.monitor?Real%20Time%20Performance.vi&refresh=20
This is a project that I'm working together with another Norwegian friend. WE are very happy for feedback on our web page and displays go to: http://www.ece.curtin.edu.au/~peersena/ if you would like to view itThanks

Annis,
One of the other things to keep in mind is that the generation of an image does take some computing power so having the generation and the acquistion on the same machine is not always ideal. If you're using the machine that is publishing the front panel just to collect data it's not so much of an issue.
If you really want to monitor in "Real-Time" using Remote Panels (requies LabVIEW 6.1) is your best option. This posting has more information on using Remote Panels and links to some live examples:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000C0660000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_TIER_0=0&USEARCHCONTEXT_TIER_S=0&USEARCHCONTEXT_QUESTION_0=web+control&USEARCHCONTEXT_QUESTION_S=0
Remote panels makes it possible to control the application remotely as well.
With .monitor the only way I've been able to manually refresh is to "Shift+Refresh" on the browser.
Regards,
Kamran

Is the summarize command (i.e. Autosummarize, ToolsAutoSummarize) available in MS Office '13

Similar Messages

Maybe you are looking for