Is the T420s ultrabay compatible with the seagate momentus XT 750gb hard drive?
Hello,
I have a T420s with a 160gb SSD. last friday i got the BAD_CTX error for the SSD drive and lost all of my data. i called lenovo support (still under warrenty) and they told me the drive was fine. i was shocked! never the less, i found a way to get the drive to work again, but this "fix" will delete all the data on the drive.
i want to use the ultrabay to add a new HDD to backup my SSD on and would like to know if the these three products are compatible.
T420s using the ultrabay with a seagate momentus XT 750gb hard drive?
Thanks in advance for your help...
James
jamesrb wrote:
T420s using the ultrabay with a seagate momentus XT 750gb hard drive?
I'm 99.9% certain that the answer is yes. I have a 500GB HDD in my UltraBay with no problems.
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30
Similar Messages
-
I'm using a Intel Core 2 Duo Mac OS X 10.4.11. When installing the Seagate FreeAgent GoFlex portable hard drive, I find an error in the logs - "dyld: Symbol not found: ___stack_chk_guard"
Referenced from: /Volumes/Mac Installer/MacInstall.app/Contents/MacOS/MacInstall
Expected in: /usr/lib/libSystem.B.dylib
How do I fix this? Thanks,OK, OSX can read that but not write, but...
A few options...
You could format that HDD as Fat32/MS-DOS, but you'd be limited to 4 GB Filesizes.
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930
MacDrive for the PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/ -
TS1394 is mac os x 10.4.11 compatible with my passport for mac portable hard drive?
is mac os x 10.4.11 compatible with my passport for mac portable hard drive?
The specs for the Passport Essential HD says:
Macintosh
Available USB port
Mac OS X 10.5.x
Don't know why it wouldn't work with Tiger.
Cheers, Tom -
Seagate Momentus 7200rpm 160GB hard drive... too new to buy??
On seagate's website they now have a Momentus 7200.2 model line of hard drives that include 120GB and 160GB models. I have been trying to find them online and it seems they are no where to be found. I am considering upgrading my hard drive to a 7200rpm drive; the storage benefits offered by these new hard drives would end any doubt in my mind to do the upgrade.
Does anybody have either of these or know what's going on with seagate?
15" PowerBook G4 1.67Ghz 2GB RAM Mac OS X (10.4.6) Logic 7 / Yamaha C5 & MO8Aww nuts!
I was under the impression that the last gen powerbooks had the same kind of hard drives as the new macbook pros.
What are the advantages of the SATA drives over the ones our powerbooks have anyway?
Does anyone make a 7200rpm hard drive over 100GB for the powerbook?
15" PowerBook G4 1.67Ghz 2GB RAM Mac OS X (10.4.6) Logic 7 / Yamaha C5 & MO8
15" PowerBook G4 1.67Ghz 2GB RAM Mac OS X (10.4.6) Logic 7 / Yamaha C5 & MO8 -
Can i install a Seagate momentus XT hybrid hard drive in my 2011 27' iMac?
As title. Heard a lot about the temp sensor that might cause this an issue?
If its a problem, would it work if i installed it as a 2nd drive?
ThanksTwofacedtrout wrote:
If its a problem, would it work if i installed it as a 2nd drive?
Your can place one in a external Firewire 800 or Thunderbolt enclosure, but it's not a SSD, it's a hybrid drive that stores the most frequently used data on it's SSD part.
So since it would be a extenral drive, and you can't boot from it for long, it's a storage drive which your accessing it will be random, basically eliminating the SSD portions of it that does give you the speed.
Your better option for fast external storage is RAID 0 of 2 7,200 RPM drives, + 1 larger one where the RAID 0 is auto-cloned to it nightly, with a extra drive for the RAID 0 as a hardware replacement.
Next step up after this is a RAID 5 on Thunderblot with 5 7,200 RPM drives.
All depends what your needs are for fast external storage and how much.
The iMac is a consumer machine, it's not designed for MacPro type uses, swtich drives etc. etc. -
Will this hard drive (Seagate ST1500DL003 Barracuda Green Hard Drive) work in a mac pro?
Have a mac pro at my church that has a 500 gb and a 1 tb hard drive but since we do a lot of video editing on it the hard drive fills up fast but was wondering if the Seagate ST1500DL003 Barracuda Green Hard Drive
would work in the mac pro 1,1 just need some more storage and maybe a time machine back-up?I have seen a lot of change in Green drives and new models, be sure the reason it is cheap is trying to off load and get rid of stock.
Some people have no trouble and use them without issue. External USB for TimeMachine can result in the drive parking and OS X and TimeMachine losing communicating. While others have used them even in arrays inside w/o trouble.
3TB Green has been popular. I've only used 1 and 1.5TB though. -
What is the proceedure for replacing a hard drive (after failure) for RAID 5 with IX4-300D?
I have the IX4-300D with 4 hard drives (identical Seagate drives) using RAID 5.
Someday a hard drive will fail and I and I have to replace it. I read through the users manual briefly and I didn't see any documentation on how to perform a hard drive replacement and not lose any data.
So here are my questions:
1) I know per the instructions that Lenovo prefers using identical hard drives. Let's say in 2 years, 1 hard drive fails. Most likely, the same model Seagate hard drive will not be available. So will using a replacement hard drive by the same manufacturer with similar specifications work?
2) Will the front panel (or the software) tell me which hard drive has failed?
3) What is the proceedure for replacing a hard drive after a failure occurs? I read that the IX4-300D is not hot-swappable. So do I just power the IX4-300D down, replace the hard drive, and turn it back on?
Solved!
Go to Solution.Hi exceptionalht,
It is best to replace the hard drive with one that is the same manufacturer, rotational speed, and capacity, so it does not have to be exactly the same model.
The front panel should show which drive has failed. If not you can check the web interface to find out.
That is the basic procedure for replacing a hard drive. You can see a more detailed instructions here: Installing hard drives in an ix4-300d
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page -
Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?
Install iTunes.
Once install, hold SHIFT and launch iTunes.
When prompted, point iTunes to the correct location for the iTunesLibrary.itl file which should be in the iTunes folder under <user>/Music on the old drive. -
I recently added my old mac hard drive to a new macbook with an SSD as my main OSX drive. I am having trouble with permissions in viewing my old hard drive, when I save a permission when I reboot the full access is changed again . What is the best way to get complete access to my old hd installed in my new Macbook?
Open the Get Info window for the old drive. Click the Lock icon on the bottom of that window and type in your password. In the permissions area click the Plus sign ( + ) and Add your Username to it and set it to Read & Write. Close that window. you should now have full access to all the files.
-
I was running OS X 10.4 Tiger on a 2006 iMac. My home folder is backed up on a My Passport 500GB USB external drive using Backup (the original application that came pre-installed with the orange umbrella symbol).
I was intending to upgrade tp Snow Leopard so that I could sync a new iPad with iTunes and iPhoto so had ordered the disc from Apple and was waiting for it to arrive.
2 weeks ago my hard drive stopped - and I took the iMac to a support store (I am currently in Belgium and there is no Apple store here). They confirmed the hard drive was dead and as I had my receipt for Snow Leopard installed this for me.
Now I am trying to restore my home folder but the new OS does not recognise the data. I can see there is nearly 200GB of data on the external drive - but the folders contain small files call backup.log, backup.log.gz, InfoPlist.stringscat, stat0..... all under 5MB.
Applecare told me they did not know about the Backup application and it was not theirs..... then suggested I tried migration assistant.
With migration assistant, I just get a spinning wheel at the initial 'select your disk' page - spinning now for more than 8 hours. I checked on line and the only advice I saw was to use firewire - but my external drive works with the new high speed USB...
Can anyone help?Thank you for your help - I now have a solution ...in case it helps someone else.....
...I also think I may have been a bit silly...
The solution - thanks to a great guy in Apple Support USA - thank you Matt!!
first I partitioned my hard drive using disk utility - and set 235GB for a separate install - I called it Tiger install disk
this allows your hard drive to act as 2 totally separate systems (by holding down the option key when you start the computer you can choose which you want)
then I reinstalled Tiger from my original discs onto the new part of my hard drive
then I read my backed up home folder and copied it to the Tiger system on the new hard drive section
then I rebooted and started up Snow leopard on the original part of the hard drive
then I used migration assistant to transfer from the 'Tiger install disc' drive - it was recognised by migration assistant
Where I think I may have been a bit silly
I am now not sure if the orginal backup was always visible in Snow Leopard
in Tiger I found backup.sparseimage - which when double clicked opened up my home folder
now that I have istalled Tiger as well - I can also find this in now Leopard... ...so maybe I just hadn't opened all the original folders on my backup disk...
...but for sure migration assistant could not read the backup copy -
How can I play the music on my external hard drive with my laptop?
Look before everyone points out that this has been asked lots of times before, I wanted to state that in this particular case it might be a little bit more complicated. You see I think I've been an idiot.
I backed up all my physical music onto my external hard drive, but only the physical music. So now I have my nice new laptop and haven't got a clue how to play the music off my external hard drive, since I don't have an itunes library on my external hard drive.
Anyway any help would be much appreciated.
ThanksAm I being a plonker, but it doesn't seem as simple as that. If I try and import via itunes it seems to want me to select the individual music file not the folder which holds all the music.
Also if I simply import it, won't my mac copy the files from my external hard drive back on to my laptop? Which makes me think I change the location where all the music is stored in itunes...?
Thanks for the help! -
Photo Smart 8250 Conflicts With Seagate Free Agent External Hard Drive
I recently installed a Seagate Free Agent External hard drive. The hard drive will not work when my printer is connected. I checked Device Manager and found that both the printer and the hard drive load a USB Mass Storage device driver that is the same version number. If I unplug the printer the driver is removed from Device manager and the hard drive works fine. Should the printer load a USB Mass Storage device driver when it is connected?
Welcome to Apple Support Communities
Of course. Your external drive compatibility depends on the file format it uses.
You won't have any problem reading your external drive because exFAT, FAT32 and NTFS are compatible with OS X. However, if your external drive is formatted with NTFS, you won't be able to write in it. You will notice it when you try to copy data to your external drive from the iMac. If that happens, you have two options:
1. Use a third-party application like Parallels NTFS.
2. Format the external drive with exFAT or FAT32. You have to do this in a PC. Copy your data to the internal disk of your computer before formatting the external disk.
If the external disk is formatted in FAT32 or exFAT, your external disk will work correctly -
Hi All,
I recently purchased 13" Macbook Air with OS 10.10.2. I want to use my 1TB Seagate backup plus external hard drive as time machine and my windows 7 pc. Please suggest a method. Thanks in advance for your reply.I strongly recommend having an external drive dedicated solely for TimeMachine. You could partition the drive but if something goes wrong you risk losing the data on both partitions. Should you decide to go ahead with splitting the drive for two different uses you’ll need to partition the drive either using the Mac’s built in Disk Utility program or Windows utility. I believe the built in Windows disk utility program will destroy the current partition and erase the data that’s on it - I use a third party Windows disk utility program for partitioning and it allows for non-destructive partitioning but warns to back up data first just in case. Apple’s Disk Utility can do non-destructive partitions but I don’t recall every trying to do a non-destructive partition on a disk originally formatted for Windows using it. Again - back up that data just in case.
Finally, your TimeMachine drive should be at least 1.5 times (I prefer 2 times) the size of the data you expect to be backing up a year or two from now. In other words, if you currently are using 50GB of your computer’s drive but expect to begin purchasing Mac software to replace software on your Windows computer and if you expect to be putting photos, music, and other data on it you might expect that two years from now you’ll have 100GB of stuff on the drive. So a 200GB partition is the smallest size you’d want. TM’s backup scheme keeps multiple copies of data as it changes so the extra room is important for this scheme. -
Will a dv7-2160ed work with a Seagate Momentus XT?
Need to replace my borken HDD.
Will a dv7-2160ed work with a Seagate Momentus XT (SATA 500 mb, 32 mb cache, solid state hybrid)?
Thanks in advance!Yeah no problem. It is my recommendation for people who can't quite see the expense of a full SSD drive. The hybrid is still noticeably faster than a pure mechanical drive and it does not have compatibility issues as we sometimes see with the SSDs.
-
Does this mean whether the IPOD's battery or hard drive is dead?
Hi there,
My IPOD Photo when plugged into the AC adapter charger, will show the same three screens again and again
(1) Black Screen with Apple Logo
(2) Sad IPOD icon
(3) Battery icon (looks like a low-battery icon) with exclamation point
I have tried the 5Rs procedure on this site to put the IPOD in disk mode but to no avail.
This IPOD is only 2 years old and has been in great condition. Does the above mean that its hard drive or battery is dead? Or both?
ThanksDoes the above mean that its hard drive or battery is dead? Or both?
It could either be
a. The battery is dead (normally it should work around 18 months), the low battery level caused the Head of the HD of your iPod get frozen.
b. The iPod does not get charged at all due to hardware/software problem.
Have a read of the following
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote
Maybe you are looking for
-
1st Generation Ipod Shuffle Issues
My Ipod Shuffle 1st Gen. (The White GumStick) Is not being recognized by itunes or even my computer. When i plug it into my usb ports on my MacBook Pro. Nothing happens Ive tried both Usb ports... The battery power is low, but it still should recogni
-
I'd like to share my experiences with BT recently, to see if other customers have had similar struggles: 23rd Oct 2012: Placed an order for a new phoneline connection and broadband. Told the first available Openreach engineer's appointment was for 13
-
I damaged my iPhone 4. I have ordered a new 4s. I never backed up or synced my contacts onto my sim card. Do you have to do that manually or will my contacts be on my phone when I put my sim card in the new iPhone 4s? (Will I be able to put my 4
-
Unable to see images in iTunes Store
Everything seems to be working fine except for the images. The only thing I see are grey boxes. I have no idea what caused this problem and I don't know how to fix it. Any ideas? SAMSUNG R540
-
Stream iTunes Match from Macbook Air?
I love how iTunes match streams right to my iPhone, so I can see all of my media without having it actually on my phone! Brilliant. However, is there a way to do thisa on my Macbook Air and iPad? Without having to download all of the library onto the