Is the task id really read only?

Hello,
is it possible to set the TASK_ID to an own defined value? For me it looks as if the TASK_ID is read only.
I am setting the project id and the phase ids but it doesn't work if I change it for the task id in the method: IF_EX_DPR_ATTRIBUTES~SET_DEFAULTS_UPON_CREATION
Could someone tell me how to change the values?
Thx, Vanessa
Edited by: Vanessa Martinez on Oct 30, 2008 4:06 PM

Matthias BRISSEAU wrote:
> Yes it's necessary. You can check it directly in debug mode: the field property is set to read-only. This comes from to the field control customizing.
> The only way is to make a modification in the field control, and that would be a standard modification, as you need to bypass the standard check.
Hello,
I changed the field control in the customizing. But the field task-id keeps read-only. Am I right that the modification modification you talked about means not customizing but implementing own code?
When I want to change the task number on the task view on the upper right side. Is it the task_id or some other field?
It is crazy for me that someone should not be able to set the task_id and has to use something that is independant from the project-phase-task-hierarchy.
Thx, Vanessa

Similar Messages

The project cannot be checked out because the server is in read-only mode.

Receiving the message "The project cannot be checked out because the server is in read-only mode." when a project manager is trying to access a project. He is a backup PM, and I'm wondering if that's why he is getting the message (since he is
not the Owner or Status Manager of the project he is trying to access). We are using SharePoint permissions in Project Server 2013.

Hi,
I have a solution that might work for you, please follow steps below:
1) Go to your project schedule, make a small modification to any task on schedule and 'Publish' the project.
2) While your project is being published and saved, open another window
Server Settings -> Manage Queue Jobs
3) Here you can view the progress of your current Project Publishing update, check if all goes smooth and your project is published successfully without indicating any errors :
( to view any error look at the last column of
table on Manage Queue Job page)
4) Also in your Project window see if the project is published and not saved as Draft.
Basically this will give you a fair idea of your project being published or not.
Regards

Essbase Java API - Check if the cube is in read-only mode

Hello,
I use "Essbase Java Api 11.1.2.0" to manage my essbase server.
I made a script based on sample to make a cube in read-only mode and I have an exception when the cube is already in read-only mode.
So is-it possible to check if the cube is in read-only mode with the essbase java api ?
Thanks
Arnaud

Hi,
I have a solution that might work for you, please follow steps below:
1) Go to your project schedule, make a small modification to any task on schedule and 'Publish' the project.
2) While your project is being published and saved, open another window
Server Settings -> Manage Queue Jobs
3) Here you can view the progress of your current Project Publishing update, check if all goes smooth and your project is published successfully without indicating any errors :
( to view any error look at the last column of
table on Manage Queue Job page)
4) Also in your Project window see if the project is published and not saved as Draft.
Basically this will give you a fair idea of your project being published or not.
Regards

How can I change the permissions on a read only external HD

I have a WD external HD and I am transferring a file more than 4GB in size. The current partition scheme supported by Ma, being FAT 32, supports only up to 4GB in file transfer size. If I format the external HD on my PC in a NTFS file format it is supposed to handle file transfers bigger than 4GB. Which is true, but it only goes one way, so for example if I am transferring a file from PC to HD to Mac it works just fine, with a few minor hickups, but the other way it does not work at all. So if I want to add anything onto the external HD being hooked up to my Mac, and still being in NTFS format I get a message saying that I do not have sufficient privileges, and under drive info it says that it is read only. Any help on the topic, please.......All the best
Rafcio

Hi Rafcio
I get a message saying that I do not have sufficient privileges, and under drive info it says that it is read only. Any help on the topic, please
Basically, this is not a privileges problem, it is a limitation of the formats. OS X can read NTFS, but not write it. See How to transfer data from a PC to a Macintosh:
Mac OS X 10.3 and 10.4 work with local NTFS-formatted volumes. The volume will be read-only.
… and Boot Camp 2.0, Mac OS X 10.5: Frequently asked questions:
Mac OS X can read and write FAT volumes, but only read NTFS volumes.

Could not save as - The file may be read-only or is already open in another application

Can anyone think of a reason why if I'm working locally on a CS3 Flash .fla on my C: drive that I would get the error:
Could not save as: C:\Users\John\Desktop\Project_File\ANNUAL REPORT RELEASE\01-19-11\report_stragegy.fla
The file may be read-only or is already open in another application. Save using a different name, or close the document and try again.
I'm running Windows 7 Home Premium 64-bit.
It happens sporadically. I haven't been able to find a reason why this error pops up when saving some of my .fla files!!
The files are not set to "read only" when I right click on them and choose 'Properties' in the Windows 7.
I found some somewhat similar situations with saving errors:
http://board.flashkit.com/board/showthread.php?t=796857
http://forums.adobe.com/message/2980090?tstart=0
http://www.actionscript.org/forums/showthread.php3?t=153738
Thanks

Sometimes I can save with a different file name. But sometimes I can't and start a new blank document and cut and paste from the one that won't save to the new untitled document.

Saving issues: "The file may be read-only" error message

I do a lot of scanning to pdf and will often have to add a newly scanned page to an existing archived pdf then resave it.
I have a very consistent workflow and use two screens. The folders that contain the archived files are always on my second screen while I work on the main screen.
After I have inserted the newly scanned page into the existing pdf very often I get an error message that the file cannot be saved:
The file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder.
I am the only user, none of files are read-only, and I am certain that the file I am resaving is not selected (I can see that on my second screen).
Sometimes if I just click on the second screen to another folder it'll let me resave, but other times I have to close Windows Explorer completely.
I like to avoid renaming files: it's important to that the original filename be retained.
This seems to be happening a lot more with Acrobat X Pro than it did with version 9. This is highly annoying.
Any known workarounds?
dg

The folders that contain the archived files are always on my second screen
If in Windows (a Mac user would have to speak to this for that environment) -
If Windows Explorer is "focused" on the file (i.e., file selected) or has "focus" on the file(s) parent folder/directory you will get the alert dialog.
Close Windows Explorer or place its focus elsewere.
Also, if the preview feature is used for files within a folder (or for files in nested sub-folder) you'll experience similar "speed humps" in the work flow path.
Was not always this way but OS updates (XP, Vista, etc.) appear to have given us some nifty new options that, coincidentally, pose some gotchas.
Be well...

"The selected cells are read-only" error on Custom Field when trying to insert in Datasheet mode

I have a custom field that works completely fine. Yesterday our QA team found out that when trying to insert in Datasheet format, the error "The selected cells are read-only" was thrown. Any ideas? I tried passing the following property to my fldtypes_field.xml file:
    <Field Name="ReadOnly">FALSE</Field>
No luck.Victor Palma

Unfortunately it did not work. I also developed the code and access the field and checked its property called "ReadOnlyField" which is already set to false.
Below is the xml that i am using. Can you please share the xml that you had used?
<?xml version="1.0" encoding="utf-8"?>
<FieldTypes>
  <FieldType>
   <Field Name="TypeName">MyCustomField</Field>
   <Field Name="ParentType">Text</Field>
   <Field Name="TypeDisplayName"> My Custom Field</Field>
   <Field Name="TypeShortDescription"> My Custom Field</Field>
   <Field Name="AllowBaseTypeRendering">True</Field>
   <Field Name="ReadOnlyField">False</Field>
   <Field Name="UserCreatable">TRUE</Field>
   <Field Name="ShowInListCreate">TRUE</Field>
   <Field Name="ShowInSurveyCreate">TRUE</Field>
   <Field Name="ShowInDocumentLibraryCreate">TRUE</Field>
   <Field Name="ShowInColumnTemplateCreate">TRUE</Field>
   <Field Name="FieldTypeClass">My Assembly Information goes here</Field>
  </FieldType>
</FieldTypes>

The file may be read only

Every so often (approximately every one in three times I try to save), I get the message 'The file may be read only, or another user may have it open. Please save the document with a different name or in a different folder'. If I carry on working and then try to save it a few changes later, it sometimes successfully saves the file. Often it takes several attempts, but eventually it does save it. This happens with all my Illustrator files, they aren't read only and another user doesn't have them open. I'm using a trial version of CS5 and Windows 7 on a personal PC (I still have CS4 installed too - I don't know if it's something to do with this). Anyone have any idea what could be causing it?

It may be that you were using a font temporarily that was located in a directory that was read only or an image that was placed in the fie or another type of art placed in the files that may have the permissions restricted by accident. It could be that the scratch disk contains some sort of file that you are using and it has a restriction on the permissions as well.
Check to see if there is permissions problem on any of your directories or folders.
There may also be the possibility if you are e-mailling samples of the file that it is in use or at least your system and ai thinks so.
But it mostly sounds to me like the scratch disk needs to have the permissions corrected and that after a few attempts you end up clearing the cache so it is no longer using the scratch and then you are able to save it. Now I am not an engineer but this makes sense to me.
But it may simply be a problem with the settings folder and yiu can try this as well.
1. Quit Illustrator.
2. Rename the AIPrefs file (for example, to AIPrefs.old) in the Users/(user)/AppData/Roaming/Adobe/Adobe Illustrator CS5 Settings folder.
3. Start Illustrator. Illustrator creates a new preferences file.

Cannot save the file may be read only

Does anyone know how to save a current PDF in Adobe Acrobat X pro if getting "the file may be read only, or another user may have it opened. Please save document with a different name or in a different folder" windows 7. The file has not been opened by anyone, and this happens when I amend the document and try and save again. I have turned off "protected view" within the preferences. Deselected the file in its folder, and turned off the preview pane in the explorer window.
Does anyone have any ideas how to get around this? thank you.

Chances are it is a problem with the preview being turned on in Explorer. You might try closing Explorer, changing it to a different folder, or turning off the preview (the typical solution).

LOV Displays the Return Value when Read Only

Greetings,
I searched for a question/answer for this, but didn't find this exact scenario mentioned, but I may have missed it. If you know of this already been asked/answered just point me to the thread.
On APEX version - 4.1.1.00.23
I have a LOV that is populated by a dynamic action from another LOV. That works great. Depending on the value of another page item the 2nd LOV is Editable or Read Only. The problem is that when the 2nd LOV is Read Only the result value (an ID) displays instead of the display value.
1 - Why is this?
2 - How do I prevent this from happening?
Also, I don't want 2 separate page items (one for edit, one for display) for the 2nd LOV, because the 2nd LOV also has a dynamic action on it to populate a 3rd LOV. The population of the 3rd LOV works great, whether the 2nd LOV is editable or read only.
= = = = = = = 2nd LOV SQL = = = = = = =
select sub_com_desc||' - '||commodity_desc d, defect_code_header_id r
from qcis_defect_code_header
where inactive_date IS NULL and plant_id = :P10_PLANT_ID
order by sub_com_desc
= = = = = = = = = = = = = = = = = = = =
Thanks, Tony
Edited by: cloaked on May 8, 2013 12:11 PM

I've decided to try a different approach. Since the Select List LOV was Read Only and not populating correctly it was causing a session state error when inserting the row. So, I've made the Select List LOV editable, but it shouldn't be. I now need to disable the page item using JavaScript to prevent it from being changed. I need to do so only when a page item contains a certain value.
Will someone share an example of JavaScript snippet of code I need to use? (I'm not much of a JavaScript coder.)
The page item I need to disable is named - P10_DEFECT_HEADER_ID
I need to disable it when P10_MAP_TYPE = 'P'
Thanks, Tony
Edited by: cloaked on May 15, 2013 1:00 PM

How to make a schema really READ ONLY

Our legacy database is on 11.2.0.1/Redhat. Last week, one developer by accident changed the legacy schema by executing drop/creat/alter table commands. This causes big problem. Now we want to make the legacy schema absolutely read only. Thus nobody can change the schemas object and data.
There were posts talked about make the tablespace toe read only. That stopped inserting/deleting but one can still change the schema objecs with create, drop and alter, e.g.11:31:41 SQL> create table DUMMY(dummy int);
Table created.
11:32:06 SQL> alter table dummy add ( address varchar(20));
Table altered.
11:24:14 SQL> drop table DUMMY ;
Table dropped.How can I stop this type of changes to the schema?

Revoked most privileges from user LCCH (this is the one I want its schema READ ONLY), only leftselect distinct privilege,admin_option from (
select r.role,user,r.privilege,r.admin_option from role_sys_PRIVS r
union
select 'sys',p.* from user_sys_PRIVS p order by 1,2,3
PRIVILEGE                                ADM
CREATE SESSION                           NO
SELECT ANY DICTIONARY                    NO
SELECT ANY TABLE                         NONow user LCCH can still create table in its own schema13:08:49 SQL> show user
USER is "LCCH"
13:08:56 SQL> create table lcch.DUMMY(dummy int);
Table created.
13:09:33 SQL> drop table dummy purge;
Table dropped.I double checked the privileges granted and confirm that schema has not role granted, no object privileges granted and only the above 3 system privileges granted.

Can't save the illustration. The file may be read only, or the file is in use by another applicatio

Getting error "Can't save the illustration. The file may be read only, or the file is in use by another application." The file is not read only and is not in use by another application.

The same thing may happen in Windows Explorer, specifically if it is a very big file (physical size), so preparing the preview may take a lot of time.
In that case it is used by "another application", that is: Explorer.
By the way, which version of Illustrator are you using, Tetons?

HT3275 Any other suggestions for the message the backup volume is read only

I keep getting the message Time machine is unable to complete the backup because it appears the backup volume is read only. I've tried the suggested repairs from apple for this but keep getting the same problem. Any suggestions?

The Master of the Time Machine, Pondini has extensive documentation and he mentions your particular problem in the following link.
http://pondini.org/TM/C6.html

What to do about Backup failed with error: The target volume is read-only

This is a weird story. My wife has a PowerBook G4/1.33 GHz that she uses in clamshell mode with a 20" Cinema Display. One day under OS X 10.5.6, her Time Machine backups (to a networked 500 GB Time Capsule) failed with the error: Backup failed with error: The target volume is read-only. So I upgraded her to 10.5.7 and erased the sparseimage file, starting a new Time Machine backup. And it just happened again. Any idea how this sort of problem arises? My wife was doing something at her computer when the Time Machine error occurred.
Please don't advise us to upgrade to 10.5.8, because her PowerBook freezes not infrequently with any OS later than 10.5.6, and I was just about to downgrade her from 10.5.7 to 10.5.6.

Pondini wrote:
odysseus wrote:
This is a weird story. My wife has a PowerBook G4/1.33 GHz that she uses in clamshell mode with a 20" Cinema Display. One day under OS X 10.5.6, her Time Machine backups (to a networked 500 GB Time Capsule) failed with the error: Backup failed with error: The target volume is read-only. So I upgraded her to 10.5.7 and erased the sparseimage file, starting a new Time Machine backup. And it just happened again.
Try repairing the sparse bundle, per #A5 of the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.
I've tried this before, but it can't be repaired, because it can't be mounted.
Any idea how this sort of problem arises? My wife was doing something at her computer when the Time Machine error occurred.
One possibility is, the HD in the Time Capsule is beginning to fail (all HDs fail, sooner or later).
I'm backing up to my own sparseimage bundle just fine.
Please don't advise us to upgrade to 10.5.8, because her PowerBook freezes not infrequently with any OS later than 10.5.6, and I was just about to downgrade her from 10.5.7 to 10.5.6.
Those two things may be related. Whatever's going wrong may very well be what's corrupting the backups.
I'd recommend finding out what's wrong with the Powerbook. It's impossible to tell, of course, but that may be the root of the problem.
There's a problem with PowerBooks and Cinema Displays. I've posted a lot about this. Even after a motherboard replacement, my PowerBook G4/1.67 GHz had freezes, and eventually Apple gave me a MacBook Pro, but I think there's a failure involving hardware/software design.
If you haven't yet, I'd start by dong a +*Verify Disk+* on it's internal HD (also per #A5);
That checks out fine.
if there are no errors, or they're fixed and the problem continues, run the +Apple Hardware Test+ from the disc that came with the Mac. (One of the discs should have that, and instructions for running it, printed in tiny type on the label).
If still no help, I'd be inclined to do an +Archive & Install, preserving users & settings,+ of Leopard, then download & install the appropriate "combo" update. That's a combination (thus the clever name) of all the updates to Leopard since it was first released, so installing it should fix anything that's gone wrong since then, such as with one of the normal "point" updates. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate (change the last "8" to the desired number). Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.

Make certain fields in the Account Detail Page Read-Only based on a Checkbo

Hello
We would like to make certain fields on the Account Detail Page Read-Only based on a checkbox that is on the Admin Account Detail Page. The fields we are looking to make read-only are Account Name, Primary Address, Phone Number.
Thanks

Brian,
I think you'd need to use dynamic page layouts for this. Look at the Account type values, if you are already using it then replicate those values you have so if you have Business and Personal make it Business Read-only and Personal Read-only.
When you are ready to lockdown those fields change the Account type from Business to Business Readonly and have the page layout for this screen with Account type, Name, Primary address and phone number as read only. You will a separate page layout for yourself so that Account Type stays as writable for you.
You will need to check if you can have Account Name as read only as it is a required field.
cheers
Alex

Is the task id really read only?

Similar Messages

Maybe you are looking for