Is the text associated with "0x80040707" significant?

hi y'all
i've seen two posts today about errors referencing "0x80040707". but the
b text
associated with each error message is different.
i've also seen a fix (involving editing the registry) that references the "0x80040707" number. but the fix is for an "0x80040707" error associated with text that is different
b again
from the two posts ...
because i'm not sure whether or not the different texts imply there's a different problem in the three cases, i'm
b really
reluctant at this point to direct people to the fix.
would anybody knowledgeable mind commenting on the significance that the various associated texts have to these "0x80040707" errors? In particular, do you have to do a different fix for each different "associated text"?
love, b

b case study of a fix for "Internal Failure, error number 0x80040707" variation:
Let me see if I can recall the exact order of what we did. First I went into "Run", msconfig. Then in the general tab, chose Selective startup. Then I clicked on the start up tab and deselected everything but I tunes. Then we went back to add/remove software and tried to delete the old I tunes.
I was not able to delete the I tunes (still got the same internal error 0x80040707). At that point we logged into my son's user account in windows and tried to remove i-tunes through control panel add/remove. It did delete! The problem was that my son had down loaded the first i tunes and each of our user accounts acts as administrator, so I tunes could only be deleted by the administrator that down loaded it. Once I was able to delete the old, we down loaded the new 4.9 without problem.
I had not realized the importance of the diffent users within windows xp. Now I know
for more context on this particular fix, see:
dpants, "Unable to reinstall or run iTunes" #24, 12:17am Jul 24, 2005 CDT
(start from message 13)
love, b

Similar Messages

After upgrading to the latest itunes, the text associated with syncing a device is gone. The buttons are there but no text. Also the toolbar for iTunes has disappeared.

After upgrading to the latest editon iTunes, the text associated with syncing any device is gone. The buttons are there but no text. Also the toolbar for iTunes has disappeared.

That's consistent with trouble with the Segoe UI fonts on your system.
If you're using Windows XP or Windows Vista, try Vortical's technique from the following post:
Re: iTunes 10.1 Missing Text
But if you're using Windows 7, try itunesTRK's suggestion from the following post:
menu bar invisible

How to retrieve the text associated with a link annotation

Hello
In Acrobat, I created a link using the Select tool. I selected the text which I wanted to create a link.
After with a C++ plug-in, I want to retrieve the text associated with a link annotation. Which is the function which makes it possible to find the text?
Regards
David G

ok thanks for ur reply now my question regarding about ur first three message..
U told using quad we finding their rectangle dimensions and then compare that with link annatation title. So then we retrieve link annataion right..
Ya i already done like u told.. But i have one problem so plz solve dis..
Problem--- see my code below
for(int nWordCounter = 0; nWordCounter < nWordCount; nWordCounter++ )
pdNWord = PDWordFinderGetNthWord(pdWordFinder, nWordCounter );
PDWordGetNthQuad(pdNWord, nWordCounter, &quad);
blh = ASFixedRoundToInt32(quad.bl.h);
blv = ASFixedRoundToInt32(quad.bl.v);
brh = ASFixedRoundToInt32(quad.br.h);
brv = ASFixedRoundToInt32(quad.br.v);
tlh = ASFixedRoundToInt32(quad.tl.h);
tlv = ASFixedRoundToInt32(quad.tl.v);
trh = ASFixedRoundToInt32(quad.tr.h);
trv = ASFixedRoundToInt32(quad.tr.v);
char *a = (char*)Asmalloc(20);
sprintf(a, "%d %d %d %d %d %d %d %d", blh, blv, brh, brv, tlh, tlv, trh, trv);
In dis code, the quad values of blh, blv, brh, brv, tlh, tlv, trh and trv are same for all words(pdNWord). so pls help me for dis proble..
thanks in advance
Raghu N

Refresh the object associated with a Row in a Data Control?

I am using EclipseLink & have an issue with multiple updates of the same Row. During an update, a new instance of the entity is returned by the update method. The instance bound to the Row is not updated with this new version and subsequent updates fail with an optimistic locking exception since the entityVersion hasn't been updated.
Question: Is it possible to refresh the instance associated with a data control Row? I can remove rows, create rows, but it is not apparent to me how to update a row. I am trying to avoid doing a full retrieve on the bound iterator.

Hi!
The issue here is, by my opinion, a gap between ADFm and EJB 3.0 in use-cases with large data sets. If you search this forum, you may find related thread by Pedja about problem of feasible "scrollable" af:table with large number of entities in EJB finder result list. Unfortunately, the ADFm "paged" fetching is in mismatch with EJB support for "paged" (or scrollable) results lists. The all results of EJB finder method are retrieved from data source, stored in memory (thus breaking the heap) and transferred to ADF datacontrol. Then, and only then, ADFm paged fetching and caching mechanisms are employed – but they are just cosmetics as the main data set is permanently stored in memory as List<?>. The workaround is, as Pedja discovered, to write completely proprietary TableCollectionModel which completely evades ADFm and is implemented by set of EJB Session methods for paged acces to datasource through TopLink and native database queries (enabling retrieval of particular range of rows instead a complete result set). Of course, this is very complex coding experience and I find it a not acceptable for efficient development of modern applications on ADF + EJB stack, especially as it brakes a technology independence promoted by EJB and EclipseLink and other standards-based technologies (as you have to use database-specific native query implementation for paged /scrollable access!).
What I want to say is that I have feeling that ADF support for EJB is not complete in full extend and that ADFm is still much better suited for BCs then for EJBs. I hope that this will be solved in future as this issue may pose a significant issue on application development in enterprise-level area where it is supposed that we are dealing with BROWSING also a large data sets.
Yes, I emphasize a BROWSING as I strongly oppose a dogmatic approach that SEARCHING is a solution for every use-case. From theory of information, the system SHOULD NOT limit the user in accessing ALL information (based on access rights, of course). So the idea that SEARCH forms should be used to bridge a architectural gap between a ADFm and EJB is not acceptable, as the search MAY limit the user in acquiring the information he (or she) is not able to describe in adequate manner based on search criteria offered by the developer. So, the developer may be responsible for misinformation of user, by limiting his access to information, jus for technology limitations of ADFm which forces a development of purely SEARCH-based functionalities.
I hope that development team would appreciate and consider this remarks, and invest effort in closing (not bridging!) the gap between ADFm and EJB.
Regards,
PaKo

How can I change the age associated with my daughter's account?

OK I am sure that this is a common issue. Back when my daughter was about 9 or 10 years old, we bought her an iPod Touch. She was too young to have an AppleID of her own, so I set one up for her using an extra gmail accoun that I had, and entered my birthdate/age. A few years later, she received an iPad, and most recently, an iPhone. All of these devices are tied to the same AppleID.
Well, now she will be 13 years old soon, and I would like to switch things to represent reality. She has her own email account, and I believe you can go to My Apple Id to change the Apple ID name and e-mail address. My question is, can we change the age associated with the account?
I hear you saying, "Just create a new AppleID for her." That may end up being the only solution, but I am trying to avoid having two AppleIDs for her to keep up with. She has already purchased a fair amount of content (music and apps) under the existing AppleID, and I am pretty sure from looking at the posts on this Community that you can not transfer content away from the AppleID under which it was downloaded/purchased. And so, if I create a new AppleID, she will have to re-purchase the content to get it all in one place. As she eventually grows up and becomes independent, I would like for he to not have to "start over" with her AppleID.
Any advice or direction to information would be appreciated.

I have a similar situation however a bit more complicated! It seems that when I was setting the birthdate I forgot to change the year so now my seven years old daughter shows up as a two months old! There is no way to change the birthdate because it shows up in light grey when I login into my daughters account and doesn't allow a change! The birthdate can be changed only when the child turns 13 however according to this she will have to be 20 before she can change it to show property 13 and here is where this is getting completely out of hand! Now to make things more complicated I have twin daughters and they came up with their unique but similar Apple ID, so changing one will require to change both Apple IDs! After being on the phone with Apple's customer support for about one hour I talked to a supervisor and the supervisor of the supervisor and their only solution is to create a new Apple ID! Of course in my case I will have to create two new Apple IDs, and I'm considering doing it. However when I started reading it becomes more complicated because I already made their Apple IDs part of my family group. It seems like you're not able to just let go of family member that is less than 13 years of age. You can only transfer it to another family, so Apple is making sure there are no kids left behind It seems like the only option will be to "abandon" the family and then create a new family with the new Apple IDs. If all this sounds bizarre to you it sounds bizarre to me too! If I can just put the kids in the car and drive them to the nearest one hour away Apple Store and have them show their credentials confirming their birthdate I would rather do that than having to spend more and more time with this issue, but that was not an option pointed out by customer support. So folks keep in mind that if you make a mistake your children's age is set in stone until he or she turns 20 if they happen to be seven at the time you made the mistake and no one can change this, even Apple! Now on the positive side I'm glad I didn't do the mistake when she was 13 or she will have to wait until she's 26 Most likely I'll be calling customer support tomorrow again and I will let you know how it went!

I can't access my iCloud account because my primary email is dead. I want to change my ID for the one associated with my current email address.

I can't verify my icloud account because the email associated with it got deleted in a messup by the email provider. I made a new ID with another email address, but I don't seem to know how to set it as my iCloud account. Apple insist on asking me a password for my old account, I enter it, but it says it is incorrect. I have tried to fix it, and apple knows it is there as it appear on the list of apple ID's, but doesn't recognice the password and when I try to reset the password it gets me to my new account, which needs no resetting.
All I want is to get rid of that old account and replace it with my new one in order to use the cloud, but it seems I am stuck with a non funtioning user ID. I have tried everything there is on this pages, but nothing works.
Please, tell me, step by step, how can I remove the old user ID from the icloud account for good and replace it with my new ID on all my devices.
Thank you.

Welcome to the Apple community Yao.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

HT204053 I have two Apple IDs current. On my iPhone one appears in settings iCloud and this is the id associated with my iMac.

I have two Apple IDs current. One my iPhone one appears in Settings/iCloud and this is the ID associated with my iMac. The second appears on my iPhone when I connect to the App Store to purchase or update. I have forgottenthe password for this ID and also the secuity questions. Attempts to reset the password by email have been unsuccessful as no email has been received and I have lost the answers to security questions. How can I reinstate this ID? Help please

Call Apple Care for your country and ask for help resetting the password and the security questions.

I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

Thanks - I guess it is like there were two of me!
I bought the iPhone first and it seemed natural to link it to the (work) e-mail address which was in constant use. The iMac for home use came next and it seemed natural to use my home e-mail address, particularly as I knew by then that I would lose the work address after my imminent retirement. The same logic went for the recent puchase of the MacAir. I am not sure what happened with the iPad (also a recent purchase) - iTunes seemed to puch me towards the same ID as the iPhone.
It is not a huge problem - just makes my persona look schizoid! Otherwise very happy with everything Apple.

Is there a way to change the icon associated with icloud account?

Is there a way to change the icon associated with my iCloud account? It's currently a rose and i do not like it.

Welcome to the Apple Support Communities
Are you referring to your iCloud account picture or your user picture?
It looks like you are referring to your user picture. To change it, open System Preferences > Users & Groups, press the picture box and choose the user picture you want from the ones that came by default. If you want to select a different picture stored on your Mac, drag that photo onto the picture box.
If you want to change your iCloud account picture, open http://www.icloud.com and log in with your Apple ID. Then, press your name at the top right of the site and press the user picture. If you put the cursor on the picture box, you will see a button at the top of the box to change your picture

I'm trying to change my ICloud e-mail to match the one associated with the Apple ID? Can someone tell me how to do this? Seems like the phone won't accept the new one, the message states "you already have acct associated....." (a given!!) I need help !!

I'm trying to change my ICloud e-mail to match the one associated with the Apple ID? Can someone tell me how to do this? Seems like the phone won't accept the new one, the message states "you already have acct associated....." (a given!!) I need help !!

You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

How can I change the email associated with my forum account?

How can I change the email associated with my forum account? I didn't provide my work email to you, but you put it in my account. My forum postings have nothing to do with my personal PC at home. There isn't an option to update it.
This question was solved.
View Solution.

Hi:
Log in and click on your user name, then look at the upper the right side of the page.
Click on the triangle to the left of the "More Resources" section.
This will drop down, and give you options.
Select User Settings.
This will now open a page, and in the light blue type on top, follow it along to Contact Information, click on that, and change your e-mail address to what you want, and hit the blue submit button on the bottom right side of the page.
Paul

How do I find the phone # associated with my dryloop account?

Customer service said they would be open til midnight but they're closed at 11:20. How do I find the phone # associated with my dryloop account so that I can pay online.

Hi, yogaonmain!
I'm sorry we were not available to get that information to you. Your mobile telephone number will be listed on your paper statement. It is also typically listed inside your phone under the Settings/Phone info section.
If you need this information immediately, please call our customer service line at 800-922-0204.
Thank you,
AdamE_VZW
Follow us on Twitter @VZWSupport

How/where do I change the AppleID associated with my computer?

How/where do I change the AppleID associated with my computer?

What do you mean by "change the Apple ID"? Are you trying to get a new ID from the one you currently have or just add a new ID to the computer?

How can I display the vendor associated with result of my running total sum

I have a report that lists vendors with their most vecent order dates. I need to set up a rotation so that the vendor with the latest order date is next to be selected. I used the running total summary to pick the latest date. How can I display the vendor associated with result of my running total summary?

If your "latest" order date means the "oldest" order date, why don't you try this:
Go to Report tab -> Record Sort Expert -> Choose your order date in ascending order
This will make your oldest order your first record shown.
You can then create a running total count for each record.
Lastly, in your section expert under conditional suppress X+2 formula, write this:
{#CountRecords}>1
The result will only show the oldest record in your report.
I hope that helps,
Zack H.

How do I change the vCard associated with an account

I created a user account, and then imported my contacts from MobileMe. After doing this, the vCard associated with the account is incorrect. (It is taking the vCard for my cousin.) Is there a way to change this association?
Robert McMahan

In Address Book select the entry for yourself then select Make this My Card from the Card menu.

Is the text associated with "0x80040707" significant?

Similar Messages

Maybe you are looking for