Is the Time Capsule wi-fi router compatible with the Nest thermostat? I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?

I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?
If so, i already have a wi-fi router, so can the Time Capsule simply be used for wireless backup instead of as a router if there is conflict?

A TC is fundamentally a AE with a sata chip included to drive the hard disk. Some slightly different bios to include disk functions, although most of those are also on the AE. So as a router it is 99.999% identical.
And yes, if you have another router you can easily bridge the TC and use wireless for backups and internet connection. Once you no longer route through the TC the issues with most NAT problems including port forwarding should disappear.. mostly this is due to all apple routers using NAT-PMP instead of upnp which is the near universal standard for opening ports.. without upnp apple keep their routers more exclusive.

Similar Messages

I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

Hi Seattle
From Adobe site only!
flashplayer11_b1_install_mac_071311.dmg
Works fine.
Cheers Tomi

How can I reconfigure an Airport Timecapsule and Airport Extreme Base Station to extend a new Time Capsule 3TB network.

Previously they were configured to be part of a network attached to a cable modem. Now I have a DSL modem. I can get the 3TB Time Capsule tower to be recognized by my AirPort Utility but cannot get the older 2TB Time Capsule and Extreme Base Station to be recognised as wifi extensions of the 3TB Wi-Fi Base Station. This latter base station is set up in Bridge mode and the wifi is switched off on the DSL Modem. I am trying to recreate a home network (I have created a newly named one) and use the Apple products as the wifi routers, leaving the fibre optic-supplied DSL modem to interface with the internet.
I would have thought that I should set-up the 3TB Time Capsule Base Station in DHCP network mode, but trying to do so gives me error messages and renders the network inoperative. Does anyone have any suggestions as to how to get the AirPort utility to recognise the two other devices (Base Stations) as extensions of the main one? I have tried with RJ45 cabel connections to no avail.

First, it would be wise to update your computer to OS X Mavericks. It's just a free update, but it really helps your computer.
Once you've done that, on to the fix.
In Airport Utility, select the old router and click "edit". Click the Wireless tab. Select Off. Click Update, and wait. During the update, you should use your phone to read this, as you may have no wireless for a time.
Once the update is done, click the new Time Capsule and click "edit". Select the wireless tab, and change the Network Mode to "Create a Wireless Network". Choose your name, security and password. Click Update. Once the new Time Capsule is plugged in and wired, you should be able to connect to your network from your laptop.
Back on the old Time Capsule, go to the Wireless Tab and select, "Extend a Wireless Network". Select your network, and click update.
On the Airport Extreme, do the same as the old Time Capsule.
You should be done! Now, you can move your old Time Capsule somewhere else as use it as an extention of your network. And the same with the Airport Extreme. Enjoy your 5TB of network storage!

Yes... There are issues with the new iMac, early adopters baby!

Hi, I am a new iMac owner.
Being a network engineer and having worked for the "devil" himself, let me tell you... I would rather be dealing with the tiny glitches with the new iMac than owning a Dell, Toshiba, HP but most importantly running Vista!
This is a new machine with new HW and drivers. I enjoy trying the latest and the greatest. I realize there will be hurdles to overcome with any new product, but come one people! Let's stop whining, and help everyone out here. We are all here to provide constructive feedback to Apple while helping everyone out.
Yes there Display issues.
Yes there are Keyboard issues.
Yes there are WoW issue and UT as well.
Target disk issues.. Yes
Lock ups.. sure!
My suggestion... If you think you are better off with a PC and Vista, well go to it mate!
Sorry for the ramble, but I just got tired of all the whiners thinking that buying an iMac was their solution to never having issues by leaving the PC world, or should I say MSWorld... LOL

I think few, if any people claimed they were going to ditch their new iMac for a PC. I like Macs, but I don't love them like I used to.
Half the reason people buy them, is because they think they can rely on Macs more. They are supposed to be stable, fuss free and easy to use. And they still are for the most part.
But these new iMacs make a complete mockery of that because they don't represent very well what Apple stands for. "If" I bought a PC I would honestly expect some problems here & there. Its just part and parcel of the PC package. And although I don't expect Macs to be 100% perfect 100% of the time, I certainly expect better than this diabolical shambles that is the new iMac.
Just as an example.. My 4 year old G4 powerbook.. Not 100% problem free, granted. But mighty close. However, it has not crashed once the entire time I have had it. My new iMac however, crashed 4 times yesterday alone, and it didn't even get used as much as my old powerbook.
Maybe now you get the picture a little better?
Just my 2 kernel panics worth...

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

What is the default ip address for the Time Capsule and Airport Extreme?

What is the default ip address for the Time Capsule and Airport Extreme?

Open Airport Utility to find out the real IP address of the network connection. DHCP addresses are assigned by the router in the range chosen in Airport Utility.

Can I use the AirPort Extreme as a wireless extender to my Time Capsule ?

Can I use AirPort Extreme as a wireless extender ? I own a Time Capsule and want to extend my wireless network using the AirPort Extreme just because both have wifi AC. Also, does the AirPort Extreme need to be hook up via Ethernet if I extend

The problem with extending using a wireless connection between the Time Capsule and AirPort Extreme is this.......
The extender can only "extend" the speed of signal that it receives. The signal starts to lose speed as soon as it leaves the Time Capsule, and the signal will lose quite a bit of speed as it passes through the ceiling due to the thick construction. The ceiling presents what is known as "interference" to the wireless signal.
So, the signal has slowed somewhat by the time that it reaches an AirPort Extreme that would be installed on the main floor. That AirPort Extreme acting as an extender can make the signal that it receives go further, but it cannot make it go faster. A better term than "extender" really might be "repeater".
If you install an AirPort Extreme on the main floor, the signal upstairs will be stronger than it is now, and depending on how many obstructions there are between the AirPort Extreme and the upstairs area, the signal may be noticeably faster upstairs than it is now as well.
With wireless connections between devices, there are always so many compromises and variables involved that it is just not possible to predict what the actual performance might be in your home until you try things out in your home. For that reason, it is always a good idea to understand the store's return policy in advance in case a new item does not deliver the performance that you are hoping to achieve.
Now, let's say that you are able to pull an Ethernet cable from the Time Capsule to the main floor, and the AirPort Extreme is connected there in a nice, central location. Then, you could expect to receive about the same performance on the main floor that you receive in the basement, since the AirPort Extreme is receiving a full speed signal over the Ethernet cable from the Time Capsule. You can run an Ethernet cable about 330 feet, or about 100 meters with virtually no signal loss.
The performance upstairs will improve as well, since the AirPort Extreme has a full speed signal to broadcast....not the slower speed signal that would receive from the Time Capsule if it connects using wireless.
If you want to achieve the same type of performance upstairs that you have in the basement and main floor, then you will need to pull an additional Ethernet cable up to the upstairs floor and add another AirPort there.
That would probably be the "best" wireless network system that you could install if you are looking at all the options. Few of us are lucky enough to be able to install the "best" network, but those that are receive remarkable wireless performance in return for their investment.

Setting up network with ATT Uverse, Time Capsule, and Airport Extreme..HELP

PLEASE HELP!
I have ATT U-Verse which provides their own router. My Time Capsule is connected to the router (in the living room) via an Ethernet cable and has been working fine, and is set up like this:
Wireless Mode: Join a wireless network (I joined the ATT network 2wire)
Network name: 2wirexyz
Wireless Security: WPA/WPA2 Personal
Channel: 5
Connect Using: Wireless Network
When I try to add my Airport Extreme (for wireless printing in the office) by adding it to the same network (I've also tried to extend the network option) the Airport Utility thinks forever then comes up with an error and the Airport continues to flash amber. I've tried resetting the Extreme multiple times and configuring different ways but same result.
What am I doing wrong?? Please help, my wife is giving me grief for not being able to print wirelessly from her MacBook!!
Thank you in advance for any help you can give me!

Thank you Tessarax....
So does that mean I need to create a separate wireless network? I apologize, I'm not extremely familiar with how to complete what you've suggested. I know I've seen the bridge mentioned before in the Airport Utility when I've been trying different things. Would you mind giving me some more specific instructions please? Actually I just tried messing around with Airport Utility, let me know if I'm headed in the right direction:
For TC wireless mode I want to "Participate in a WDS network"?
Then where does my WDS remote come from? is that the Airport Extreme? I've plugged in the AEBS but it's not showing up in the Airport Utility...
I'll mess around with it some more tomorrow morning. Thanks I'll let you know how it goes.
Message was edited by: Jerimy75

Troubling extending wireless network with Time Capsule and Airport Extreme

I am trying to set up and extend a wireless network in my house, but it’s not working right. I have two Airport/Capsule units in the house:
2TB Time Capsule (Dual-Band II)
1 Airport Extreme (Dual Band)
I have the Verizon Fios router as my gateway to the internet, and also as my DHCP server. I have also tested the ethernet ports in my house to verify that they work, and that I can get a DHCP-issued IP address.
Now, my Verizon router has WiFI, and it’s still on. I am not using it though except to troubleshoot. So far as I understand, this should not cause a problem.
Base station setup
So I setup the TC to Create A New Wireless Network, on the ethernet network it’s on (Dlink switch plugged into Verizon router). I set it up in Bridge Mode (as opposed to having it dole out IPs, since the Verizon router does this already). The TC gets a valid IP, and my wireless device connect to it without a problem. I have checked “Allow this network to be expanded” under Wireless settings.
Extended station setup
The AE Dual-Band is plugged into the Ethernet, and is reset to Factory Settings. I name it “Airport Extreme 2” and I chose “I want Airport Extreme to join my current network.” The other two options are: “I want to create a new wireless network” and “I want to replace and existing base station or wireless router with Airport Extreme.”
I chose to “join,” I select “I want to connect Airport Extreme to my network using Ethernet to extend my existing wireless network.” The other options are to disable wireless entirely, or to “wirelessly join my current network.” On the next page it asks me to select the device or network that the Airport Extreme will connect to using the Ethernet. I set it to the Time Capsule.
Results:
Access near the Airport Extreme 2 is incredibly slow. Speedtest shows I am getting less than 1Mbps. Worse yet, my mail client won’t connect. It just times out.
What I had hoped was that the AE would connect via Ethernet to the network, and just bring the wireless network to the other side of the house. Instead it almost seems as though it is just re-amplifying the TC’s signal. Otherwise, why is performance so bad?
Thanks to anyone with some insight here!

Hello Kennuff. Welcome to the Apple Discussions!
Since you have the ability to connect all of the routers by Ethernet, there is no need to configure the Time Capsule (TC) & 802.11n AirPort Extreme Base Station (AEBSn) for a dynamic WDS (aka, extending a network). This option is only when the routers do NOT have an Ethernet connection between them.
Instead, you want to configure the TC & AEBSn in a "roaming" network. I suggest starting by performing either a "hard" or "factory default" reset on both.
Next be sure that both the TC & AEBSn are on the same Ethernet subnet coming from the Verizon-supplied router.
Configure the TC & AEBSn as follows:
AirPort Utility > Select the TC or AEBSn > Manual Setup > AirPort > Wireless
o Wireless Mode = Create a wireless network
o Allow this network to be extended: <not checked>
o Radio Mode: <leave the default or if you require a specific mode make sure both routers are configured the same>
o Wireless Security: <configure both routers the same>
AirPort Utility > Select the TC or AEBSn > Manual Setup > Internet > Internet Connection
o Connection Sharing = Off (Bridge Mode)

Extending a network with Time Capsule and AirPort Extreme (via Belkin powerline)

Hello -
I've seen many topics about extending wireless networks here, but none seems to resolve the issue I'm having. I currently have a setup where a DSL cable modem is connected to a Time Capsule and I need to extend this network to another room using an AirPort Extreme.
I live in a very old apartment in Brazil and the walls seem to block the signal from one room to another, hence the need to extend it. Since wireless signal is very weak between rooms, I bought a Belkin powerline AV500 so I could connect both Time Capsule and AirPort using the electrical power at home (just installing a regular Ethernet cable between rooms is not an option).
I started with the basics: configure the Time Capsule + DSL as a standalone network, and it works perfectly within it's range. Then I connected the Belking powerline, plugged a MacBook via Ethernet on the other end and still got very good results (actually better speed than expected). Used it for a while with streaming and other network intensive tasks to make sure it could sustain the connection.
Finally, pluggned the AirPort Extreme on the Belking powerline and this is where the problems started. AirPort Utility 6.3.1 only gives me the option of extending a network wirelessly - it doesn't seem to give me the option of extending it via Etherenet (roaming), which is not good in my case. Luckly I had a copy of AirPort Utility 5.6 which seems to do the job (or I thought so), but it's still not working well.
Although I managed to configure both with the same name, it doesn't seem reliable and some devices (the iPhone 5, for example) are unable to connect and end up with a self-asigned IP address. I'm almost sure I'm doing something wrong on the setup, as I've seen a similar setup working before, so if anyone out there has any clue of what can be done, it will be much appreciated.
Attached the screenshots of both Time Capsule and AirPort Extreme configurations.
Thanks a lot,
-TM
AirPort Exteme:
Time Capsule:

Hello JuliaApple. Welcome to the Apple Discussions!
You have several ways to configure both base stations for what you are trying to do.
The simplest would be to configure the Time Capsule (TC) to "join" (AirPort Utility > Manual Setup > Wireless tab > Wireless Mode = Join a wireless network) your existing 802.11n AirPort Extreme Base Station (AEBSn). In this type of configuration the TC would perform as any other wireless client and not perform as a router. It will; however, still allow for both backups and sharing USB devices attached to it.

How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?

How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?

Bridge the TC.. plug it into the AEBS with ethernet.

Any tricks to swapping out my old time capsule with a new airport extreme I am also using airport expresses

Any tricks to swapping out my old time capsule with a new airport extreme I am also using airport expresses? The hard drive on the TC quit working.

I do plan on using an external USB HDD for time machine backups. I have both 802.11g and 802.11n used for playing music via stereos.
I would recommend against it. Apple does not support Time Machine backups to AirPort Disks (USB HDD attached to the AirPort Extreme). Although folks have done so, we get a number of them here asking for help with their corrupted backups. If your backups are critical to you, please use another means (like connecting the USB HDD directly to your Mac) to do so.

New help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd

new help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd would like 2 store my home videos and pictures on the time machine (ONLY) as the MAC AIR has storage space limited space please help. THANK YOU.

See the info here about sharing or using the TC for data.
Q3 http://pondini.org/TM/Time_Capsule.html
It is extremely important you realise.. the Time Capsule was never designed for this.
It is a backup target for Time Machine.. that is the software on the computer that does backups.. it has no direct connection to the Time Capsule.
It has no ability to back itself up.. unlike all other NAS in the market. It is therefore likely one day you will lose all your files unless you seriously work out how to backup.
The TC is slow to spin up the hard disk and fast to spin down. iTunes and iPhoto will continually lose connection to their respective libraries.
iPhoto in particular is easy to corrupt when you move photos over wireless into the library.. once corrupted all is corrupt. A single photo will ruin it all.. so backup is utterly essential.
Time Machine cannot do backups of network drives. ie the TC. You will need a different backup software like CCC. You will then need another target to backup to..

Differences between Time Capsule and Airport Extreme re Time Machine?

We are [told|http://discussions.apple.com/thread.jspa?threadID=2299608] that a "USB drive connected to a recent dual-band Airport Extreme may work as a destination for Time Machine backups," but that "... it's not supported by Apple."
With regard to Time Machine, what are the relevant differences between a Time Capsule and an Airport Extreme acting as a USB disk server, e.g. protocol used, size limits, server limitations, etc.?

+We are told that a "USB drive connected to a recent dual-band Airport Extreme may work as a destination for Time Machine backups," but that "... it's not supported by Apple."+
A bit of clarification. For the record, Apple says that you cannot do this in this Support Document. I haven't seen a similar document for Snow Leopard, but I'm sure it's out there. You will receive no assistance from Apple in the event of any problems.
Despite this, some users have tried this anyway. Some report success, others report some success and yet others report no success. We've also seen a number of recent posts from users who say that it worked for them for a time...several weeks to several months...but they are now experiencing problems.
Having experienced the latter myself first hand, my opinion would be that it would be unwise to even consider Time Machine backups with the AirPort Extreme unless you have another backup strategy already in place.
The Time Capsule was designed to work with Time Machine backups. The AirPort Extreme was not. The answer may be that simple.

Kindly Is the Linksys E4200 Dual Band Router compatible with DHCP and VPN ?

Kindly
Is the Linksys E4200 Dual Band Router compatible with DHCP and VPN?
Thanks,

Linksys/Cisco E4200 are compatible with DHCP. Second, these Wireless-N routers are only capable of enabling the VPN traffic to pass through the device. You will need a VPN router and software to create the actual network to connect with your VPN client.

Is the Time Capsule wi-fi router compatible with the Nest thermostat? I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?

Similar Messages

Maybe you are looking for