Is the video connector for the powermac g3 beige female or male?

i just need to know weather it is female or male so i can get a adapter for the video  thanks

Not that I recommend spending more money on an old G3 than you need to, but an alternative to the on-board Macintosh video output with a VGA adapter, would be to add a PCI card if one of the 3 available slots are empty.  On-board video is limited to 6MB VRAM max.  You can add an ATI Radeon 7000 or 9200 PCI card to get VGA, DVI, s-video output, with support for dual monitors in extended desktop mode.  If you shop around you might be able to find one for only a few times the value of the G3 itself.
http://shop.ebay.com/i.html?_nkw=ATI+Radeon+7000+PCI+Mac&_sacat=0&_odkw=ATI+Rade on+Mac&_osacat=0&_trksid=p3286.c0.m270.l1313

Similar Messages

  • DVI video cards for older PowerMacs

    Hi all,
    Just curious but may I be able to install dvi video PCI cards in my 8600 and G3 mini-tower like the way G4 towers are configured?
    Thanks for your help
    web dude

    PCI versions of the Radeon MacEdition with fan, Radeon 7000, and Radeon 9200 are available with that connector in addition to a VGA connector. But shop very carefully, the AGP versions (with the quirky little tab at the end of the connector) are plentiful and affordable and will not fit in those Macs.

  • RCA or S-Video connectors for Mac - was (TV tuners are there any?)

    Hi all,
    I don't know if this is the right forum for this post, if not please direct me to the right one. Ok, I was wondering if there is any way to hook up my Play Station 2 to my Mac so that I can play the games useing my display? Is there any realtivly inexpencive tv tuner, or something that I can use to hookup eather the RCA (red, yellow, white plugs) or s-video out's on the Play Station 2 to my Mac? Normaly I would hook it up to a TV, but I do not have a TV where I am and wil not for a while. Bellow is a link to the only one that I have been able to find.
    http://www.microcenter.com/singleproduct_results.phtml?productid=0221682
    Any help would be great. Thanks in advance.
    G4 dual 1.25Ghz, FP 17 Mac OS X (10.3.5)

    Hello Malcolm,
    Thanks for the responce. I did not even think about that. So do think that it would be better for me to get the ATI 9200 video card that has a s-video plug built into it. Bellow is the link to it here on the Apple site. Thanks again and any help will be great.
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/7201107/wo/qF4ic XuSOhPA2VZux3vQMY5ghjQ/1.0.19.1.0.8.25.7.11.0.1
    Greg
    G4 dual 1.25Ghz, FP 17   Mac OS X (10.3.5)  

  • RCA or S-Video connectors for Mac are there any?

    Hi all,
    I don't know if this is the right forum for this post, if not please direct me to the right one. Ok, I was wondering if there is any way to hook up my Play Station 2 to my Mac so that I can play the games useing my display? Is there any realtivly inexpencive tv tuner, or something that I can use to hookup eather the RCA (red, yellow, white plugs) or s-video out's on the Play Station 2 to my Mac? Normaly I would hook it up to a TV, but I do not have a TV where I am and wil not for a while. Bellow is a link to the only one that I have been able to find.
    http://www.microcenter.com/singleproduct_results.phtml?productid=0221682
    Any help would be great. Thanks in advance.
    G4 dual 1.25Ghz, FP 17   Mac OS X (10.3.5)  

    Hello Malcolm,
    Thanks for the responce. I did not even think about that. So do think that it would be better for me to get the ATI 9200 video card that has a s-video plug built into it. Bellow is the link to it here on the Apple site. Thanks again and any help will be great.
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/7201107/wo/qF4ic XuSOhPA2VZux3vQMY5ghjQ/1.0.19.1.0.8.25.7.11.0.1
    Greg
    G4 dual 1.25Ghz, FP 17   Mac OS X (10.3.5)  

  • Best video card for my mac

    Hey,
    I just need help finding the best video card for my Powermac g4 fw800. One that my system can use fully. I currently have a Radeon 9000Pro with 64MB. Thanks
    ~R

    Hi
    The ATI 9800-256MB is currently the best card for your system. Actually, there are no other NEW video cards available.
    BTW, xlr8yourmac hasn't done a video card review in years, they are just a bulletin board/newsletter now. If you are interested in seeing current testing of available video cards, check out:
    http://www.barefeats.com/rad98pro.html
    Regards,
    Dave

  • How do I play a video through a connection to a projector?  I have the connector for the iPad.

    how do I play a video through a connection to a projector?  I have the connector for the iPad.

    Good job Chris!
    You can also go into iTunes Preferences, select Playback, and check the Play videos: tick box, then select from the following:
    in the main window
    in a separate window
    full screen
    C

  • How to use the iTrip with dock connector for iPod 5th gen. video

    I bought the new iTrip with dock connector for my iPod video 5th gen. and I followed exactly the instructions but I cannot hear any music on the radio. Has anyone experienced the same problem or the contrary has anyone managed to make it work. Thanks for your help.
    Inaha
    iMac 4   Mac OS X (10.3.9)   iPod 5th gen video

    I got the answer from someone else and it works.

  • Firefox 24.0 does not update any YouTube page for the download extensions. Video aivalable for download is the 1th opened in the tab and not the video playing.

    On YouTube, when more than one video have been played, staying on the same page, videos aivalable for download, by any Firefox Download Extension as Downloader Helper, Flash Video Downloader or 1 Click Video Download, are the format options for the first video opened in the tab, and not format options for the video actually playing.
    I have tried resetting Firefox ( Firefox menu : ? \ Troubleshooting Information \ Reset Firefox), and reinstall Videos Downloaders (without Adblock Plus that I normally use), it did not solve the problem.
    Temporary Solution :
    Refreshing the http://www.youtube.com/... page ( by hitting the round arrow at the right of the adress bar ) allows me to update the download features but it is annoying as it restarts the playback every time I decide to download a video ( so is it having to remember to refresh the page ).
    I am surprised it seems no one have experience and solved this problem yet.
    Regards to the team
    Running under
    Windows XP SP3 updated
    Adobe Flash Player 11 ActiveX and Plugin
    Adobe Shockwave Player 12.0
    Java 7 update 25
    Windows Media Format 11
    QuickTime Plugin 7.7.4
    Avast Free Antivirus

    What hardware are you on? Flash is always a finicky beast, especially on older hardware. This is not an entirely uncommon problem. Try looking at this [[Flash Plugin - Keep it up to date and troubleshoot problems|support article]] and see if that helps.

  • HT1689 I subscribe to my video podcasts but some of them either has a small red E next to them and won't download new content or some just doesn't download new content. I have been watching the Rachael Maddow video podcast for at least a month with no pro

    I subscribe to my video podcasts but some of them either has a small red E next to them and won't download new content or some just doesn't download new content. I have been watching the Rachael Maddow video podcast for at least a month with no problems. Now suddenly it won't download the last nights show. I have read and followed all troubleshoot and cannot find a solution. I have unsubscribed and re-subscribed to no avail. Can someone help me with this problem?

    keian27 wrote:
    And now that my contract has expired, I have some options.  Last weekend, I called Verizon again threatening to leave.  The representative offered the same $75 rebate that was offered to me 6 months earlier.  I even offered up one of my device upgrades in place of a network extender, but that deal was knocked down.  And so now I’m left with the option to make a public spectacle out of this scenario and hope Verizon takes notice.  Failing that, I’ll be forced to leave Verizon behind.
    I don't understand. If having service in your home IS important to you and you already know Verizon's policy, why have you not instead started to search for carriers which cover your home? It seems a pretty easy decision to me, at least.

  • DMS Connector for KM : I see only one document type from the document area

    Hi,
    The DMS connector is installed successfully on KM.
    I can display folder tree and documents but I see only one type of document.
    I mean, when I use transaction OAC0, I see different content repository defined in DMS.
    I wonder where is the setting that specified which content is link to the DMS connector for KM.
    Thanks in advance.

    Hello Zbynek,
    I installed the DMS once, but my experience how to use it is poor.
    In the Backend ( Transaction CV01N i think,) you can store search variants using the prefix you have defined for the DMSRM (default is KM_<theName>). This variants can be used to filter out several documents. There must be a way to give authorizations on them. Maybe you will have to use a security manager, i don't know.. in our case the user persistence (authScheme) was SAP-System an no TREX involved.
    It is not much, but maybe it helps...
    best regards
    Guido

  • Error while creating the Generic Connector for flatfile

    Hi All,
    I was trying to create the Generic connector for the flat file reconciliation. But i was throwed into errors. I'm using 11.1.1.3 OIM and as well as SOA also. I have been following the OIM 9 document to create the GENERIC connector.
    i'm copying the error i got
    <Mar 14, 2012 3:48:12 PM IST> <Warning> <XELLERATE.SERVER> <BEA-000000> <readme.txt is not a valid connector resource file.>
    <Mar 14, 2012 3:48:12 PM IST> <Warning> <XELLERATE.SERVER> <BEA-000000> <readme.txt is not a valid connector resource file.>
    <Mar 14, 2012 3:48:12 PM IST> <Error> <XELLERATE.WEBAPP> <BEA-000000> <Class/Method: CreateConnectorAction/imageScreen encounter some problems: >
    java.lang.NullPointerException
    at oracle.iam.platform.utils.OIMMessageResourcesUtil.getConnectorResourcesFromFile(OIMMessageResourcesUtil.java:964)
    at oracle.iam.platform.utils.OIMMessageResourcesUtil.getConnectorResourceBundle(OIMMessageResourcesUtil.java:778)
    at oracle.iam.platform.utils.OIMMessageResourcesUtil.getConnectorResources(OIMMessageResourcesUtil.java:764)
    at com.thortech.xl.webclient.util.tcMessageResourcesUtil.getConnectorResources(tcMessageResourcesUtil.java:215)
    at com.thortech.xl.webclient.util.tcMessageResourcesUtil.getMsgFromConnectorRes(tcMessageResourcesUtil.java:238)
    at com.thortech.xl.webclient.util.tcMessageResourcesUtil.getLocalizedText(tcMessageResourcesUtil.java:66)
    at com.thortech.xl.webclient.util.UIFacade.getUserDefLocalizedLabels(UIFacade.java:3024)
    at com.thortech.xl.webclient.actions.CreateConnectorAction.imageScreen(CreateConnectorAction.java:1250)
    at com.thortech.xl.webclient.actions.CreateConnectorAction.goNext(CreateConnectorAction.java:521)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:269)
    at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(tcLookupDispatchAction.java:133)
    at com.thortech.xl.webclient.actions.tcActionBase.execute(tcActionBase.java:894)
    at com.thortech.xl.webclient.actions.tcAction.execute(tcAction.java:213)
    at com.thortech.xl.webclient.actions.CreateConnectorAction.execute(CreateConnectorAction.java:135)
    at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
    at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
    at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
    at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
    at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
    at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
    at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:462)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.am.agent.wls.filters.OAMServletAuthenticationFilter.doFilter(OAMServletAuthenticationFilter.java:260)
    at oracle.security.am.agent.wls.filters.OAMValidationSystemFilter.doFilter(OAMValidationSystemFilter.java:133)
    at oracle.security.wls.oamagent.OAMAgentWrapperFilter.doFilter(OAMAgentWrapperFilter.java:121)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at com.thortech.xl.webclient.security.XSSFilter.doFilter(XSSFilter.java:103)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at com.thortech.xl.webclient.security.CSRFFilter.doFilter(CSRFFilter.java:61)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.iam.platform.auth.web.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:115)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthContextFilter.java:100)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    i'm just using a flat file which contents are normal.
    #GTC Trusted Source
    login,firstName,lastName,eMail,organization
    RDUDE,Robert,Dude,[email protected],Xellerate Users
    Can somebody help where i have done wrong for this. All my deployment is in oracle linux 4.5
    Thanks,
    Venkatesh

    Follow the doc for 11g, guide you might be missing something:
    http://docs.oracle.com/cd/E17904_01/doc.1111/e14309.pdf
    Highlevel configuration steps (not all and exact) are:
    -> Give it Name
    -> select Reconciliation
    -> Select Transport Provider and format provides
    -> select Trusted Source Reconciliation
    ->provide flat file details
    -> Source reconciliation staging and mapping
    ->finish
    regards,
    GP

  • Dont find the correct video drivers for my T61 + windows 7 ultimate + intel pm965 video card

    Hi Experts,
    I am keep getting the stop error 0x00000116 failing with a blue screen while im browsing. I have observerd this quite a few times and also I could not find the correct video drivers for my t61 thinkpad in the ibm site. I could see the details as wxp & windows vista but not for win 7. Please find the link below which has all the video drivers fro t61. Please help me find the correct customized video drivers fro my t61 + win 7. Hope you understand my problem.
    By the way i just use for home computing and my win 7 is upto date wiht no extra software and games installed. I dont play games at all on my t61.
    my t61 specificaitons : http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67883
    If you see the link http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67853
    if u search in the baove link ,you cannot find the video drivers for t61 + win 7. You have it only for xp & vista in this section. Intel X3100 (940GML, 945GM, GL960, GM965). there are no video drivers for win 7 for t61. my video card info is
    Video chipsets:
    Intel PM965/GM965 graphics. (15.4 inch).
    my video card is Intel PM965 chipset . Please help me to get the correct customized version of the video drivers for my thinkpad as I am getting this problem with video drivers and its getting restarted when I am in the middle of something. But it works find after that. I have tried to install drivers from intel and its saying i have customized version of lenovo drivers and I should contact you guys. I triedcomplete  win 7 update from windows site and installed all patches and still getting the problem intermitently, but after restart it works fine. No hardware or software changes. Its that I need the correct version of video drivers for win 7. Please inform the lenovo about this and ask them to develop the good video drivers for win 7 + t61 model. Hope you understand my situation.
    Please let me know if you need any kind of info so that i can provide.
    thanks for reading the mail.
    Regards,
    Manu

    Are you kidding me ? You dont work for Lenovo and you are an active volunteer here in this forums. I have seen your replied many times and wont get paid by Lenovo, you are really crazy for ur stufee .Anyways thanks a lot for the link and the original lenovo staff were notable to provide the link and you could. Well I have tried that what you have said nd still I could not get the link, here you go..
    http://www-307.ibm.com/pc/support/site.wss/product.do?doccategoryind=50880&template=%2Fproductpage%2...
    Let me install the drivers from your link and I will reply soon, so who ever search in this forum now , there wont be any problems for t61 windows 7 video drivers because of u. You are awsome.wll reply my results soon.

  • IPod Camera Connector for the iPod Touch

    I have an iPod Camera Connector for a previous model of iPod. Now that I have an iPod Touch, when I try to use it I get an error message that states this device is not supported. Has iPod created a Camera Connector to upload pictures from a card larger than a 512mg card (ie a 2+ GB card or larger) that is supported by the iPod touch?
    Thanks,
    Denice

    I don't believe so, as the iPod touch doesn't support "disk use" (it doesn't mount as a hard drive on your computer).
    CG

  • I just bought the new 2014 Mac Mini 2.6 8Gig for $699 at the Apple Store Online. I want to use it for light editing in iMovie making video's for YouTube, I couldn't afford the higher priced models. Is this going to work for me? I hope so..

    Will this do basic video editing for YouTube Video's in iMovie, I hope so.  It's all I could afford.
    Just under $800 with tax and Applecare.
    It's stock 2.6 8gigs 1 terabyte hard drive.
    I have two monitors DVI that I plan to hook to it.
    I know it's weak but will it get me going without too much hardship.
    I want to grow into the more high priced computers and Final Cut Pro later on.
    I know I will need a bigger computer then.
    Thanks

    There are many people using the basic (i5) 2012 MacMini and even older ones to edit complex films in FCP X so you should have no problems.
    I have been using FCP 7 and FCP X since they came out on my 2008 iMac Core 2 Duo and am thinking of getting the same model as you rather than pay the astronomic price for a new 27" iMac.
    The performance won't be quite as fast but it will be at least 4 times faster at rendering than my old iMac.

  • I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

    I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

    Is this happing because the external is formatted to PC and not mac?
    Yes that is correct.
    Will I need to get a mac external hard drive if I wish to continue to save my documents like this?
    If you no longer use a PC you could format this drive for the Mac. However be aware that formatting a drive will erase all the data on it. So you would need someplace to copy the data off this drive to while you did the re-format and then you could copy the data back.
    You could get another drive, format it for the Mac and copy the data to it. Then re-format the original drive and use it as a backup drive. Always good to have backups.
    Post back with the drive type and size of the current drive, if you are doing backups now and how and if you still need to access this drive from a PC.
    regards

Maybe you are looking for

  • Logout does not work in OIM after enabling OAM SSO

    We have installed a webgate to protect xlWebApp in OIM. Once the SSO is enabled, the logout does not work in the OIM user interface. How to solve this issue? Metalink has a solution where we need to add document.location="http://host:port/access/obli

  • Problem with computer's name.

    I got my computer from Macmall and the owner of the computer's name is user. I changed the admin's user name to my name but that still did not fix the problem. How do I change it?

  • Removing duplicates from playlists and keeping ratings.

    When I first started using iTunes, I thought it was a great program. However, once my music collection outgrew the size of my iPod, I began to see it has many frustrating limits and annoyances. I would appreciate it if anyone could help me resolve th

  • How MBRL hold ME21N

    Hi Friends; Here in company when user make return of goods from MBRL PO is available and user need that PO will be unavailable or hold, how us can do it? I think that is type Mvm, would is it? Thanks. Best regards.

  • Help needed with PSE9 Catalog issues

    I have been a PSE user for sometime, going back to PSE 3.0. In Jan, I purchased PSE 9, converted the catalog from PSE7 and have been working more heavily with the catalog lately. Two problems have arisen. The catalog is using the wrong thumbnail in s