Is the video record frame rate adjustable?

I would like to set up an iPod - don't own one yet - or video camera to see what the dog is doing when I'm not around. I think 3 fps should be sufficient. Can the iPod touch do this? Does it require a separate app? Can anyone suggest a dedicated camcorder that does this and tell me why that might be better than an iPod? I would also like to make other videos at normal frame rates.
Thanks,
Scott

You are welcome.
You may want to consider it's replacement model, the 6220 classic. It does 30fps and 640x480.

Similar Messages

  • (Nokia N9) Is the video recording really that bad?

    Hello guys, there's some time that I'm using the Nokia N9 and I just can't believe that the video recording quality is that bad, I came from a Nokia C6-01 and honestly, the C6-01 is much much better. The problem with the N9 is that when you move the camera the video become a mess full of artifacts, the auto-focus and the incredible audio recording become irrelevant when the videos don't make any justice for what you expect from HD videos. It's just sad that this only happens when you are moving the camera, if you stand still, the quality is incredible and the audio quality makes it perfect. I bet that the problem is from the low bitrate from the N9 videos. I'm hopeless but I wonder if there's a mod or anything that can be done to make the videos look better?

    The N9 does have an issue on video recording.
    When I was still using the Nokia N9, there are some frame lags and video quality is not at its best. Details are good on me but not as good as my Lumia 710 or the Nokia E7.
    And yet unfortunately, I can't help you on this one.
    If I have helped you in any way, give me a kudos!

  • RED footage record frame rate

    I am working with some RED footage in PP CS5.5 and I would like to check with my media what was the recording frame rate at the time of the shoot. I looked into the metadata and cannot find any field with that information. For example I have some slow motion footage shot at different frame rates and I would like to identify precisely what it is.
    If I go in REDCINE-X PRO there is a field called "Record Frame Rate" that gives me exactly that information. What is the equivalent in Premiere Pro and where can I find it?
    Thank you,
    David

    No... I checked the Clip Properties window as well with no luck...
    Here is the information I get in REDCINE-X PRO: you can see that particular clip was shot at 300 fps
    Here is the information I get in PP CS5.5, inside the project window (I looked also into the metada information with no luck so far...):
    Again when I play this clip in PP @ 23.976, it plays in slowmo as expected because it was shot at 300 fps. What I would like to get is that information of Recorded Frame Rate in PP.
    Thanks,
    David

  • In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice.

    In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice. I wished for a software fix. I did a hard reset, nothing. I did a full restore to factory settings not putting my backup on and the problem persisted.
    i have been provided with this info
    You can find troubleshooting tips, how-to articles, and moderated
    > > discussion forums on our support website:
    > >
    > > www.apple.com/support
    > >
    > > iPhone: Basic troubleshooting
    > > http://support.apple.com/kb/HT1737
    > >
    I did every step in the link that i have been provided with (thank you), but I’m
    still experiencing the same issue. My experience with Apple has been
    excellent and this has been the first time I have experienced something
    like this with an Apple product. I hope we can find a quick solution.
    In order to get the iPhone 5 as soon as it launched (being a major fan of
    Apple products!), I purchased my iPhone 5 from the UK through a friend of
    mine who lives there.
    My question is: can I have the faulty device replaced within Saudi by one
    of the official resellers here (we have 3: STC, Mobily and Zain)? I want to
    avoid the disruption, complication and expense of sending it back to the
    UK.
    Could you advise whether this is possible or not, and if not how should I
    go about having the device replaced?
    Thank you in advance for your cooperation.

    Nice try! Take a hike.

  • I have recently got an iphone 3gs, model number is A1303 but I do not have the video recording function, any ideas?

    My wife got me a 3GS for xmas it has the correct model number for a 3GS but it doesnt have the video recording feature, can anyone help?

    Are you certain it is a 3GS?
    Determining iPhone model

  • Does the video recorder on ipad 4 have a zoom button? If not, what app do you recommend for zooming in video?

    Do I need an app to zoom with the video recorder?

    Fraser41,
    school work, watching YouTube videos, and listening to music can be done on any MacBook Pro, new or used. Photo editing is the most demanding task on your list (unless you take up video editing, in which case it would be the most demanding); you can edit photos (and even videos) on MacBook Pros without discrete GPUs, but many operations will be done more quickly on MacBook Pros with a discrete GPU than on those with only an integrated GPU. If photography is your main interest, that could point to a Retina screen as a feature which might be high on your list of preferences; but since all Retina models have soldered-in RAM, however much RAM is present a Retina model is the amount which you’ll need to live with for as long as you own it. The Late 2013 models also have SSDs for which no third-party alternative is available, so at the moment their SSDs can be considered non-upgradeable also. Whether the cheaper MacBook Pro will cope with your needs could depend upon how much screen resolution you’d be satisfied with, and where you find yourself on the GPU time-saved vs. money-spent continuum.
    Note that the last 17-inch models made were Late 2011 models; if you’re not interested in used MacBook Pros, then their heaviness would be a moot point.

  • My SD video keeps jumping between the upper and lower frames. So the video starts frame blending and blurring in and out.

    My SD video keeps jumping between the upper and lower frames.  So the video starts frame blending and blurring in and out.  The sequence settings are set to
    Editing Mode: DV NTSC 29.97 frames/second. 
    Pixel Aspect Ration: D1/DV NTSC (0.9091)
    Fileds: Lower Field First
    Display Format: 30fps Non-Drop-Frame Timecode
    720 x480

    What is the source of your video, and exactly what is inside your video?
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • Ipad 4 retina - why is the video recorder zoomed?

    hi
    is there a way to unzoom the video recorder or is that standard?
    thanks

    Yes, that is normal the lens perspectives changes when you move from still pictures to be video. 

  • JMF Video Player Frame Rate comes down to zero

    Hi
    I am working on video Player using jmf. I am playing .mov file in the Applet. The appled have been signed and this part is working fine.
    I am able to get the video from server to the client using signed applet. But the problem now i am facing is that after few seconds of video download the frame rate and bit rate both comes down to Zero and the movie stops playing. I am using .mov extension with approximately 2-8 MB size of video.
    As i feels problem is coming with the http protocol. Because while playing the local video file with the same code it is performing well.

    This blog is written by one of the principle guys who writes the Flash plug-in.
    http://blog.kaourantin.net/?p=83
    I think it might have some answers for you--not the answer you want.

  • Hi,,does the new 2011 imac 27 inch U.S version  support any pal signal inputs as video or hdmi through the video recorder device or kanex xd ?

    Hello,,
    I have 1 question please,,,
    does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
    as for example
    I have a friend who lives in the middle east &  has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver  or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ?  because this is U.S version  of imac then he might need an convertor?
    the same as if he want to record any hdmi or analog  device from his video recorder  device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
    so can you pls give me an advice for him
    should he buy the imac from the U.S store or the europe store ??
    N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
    and thank you

    Hello,,
    I have 1 question please,,,
    does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
    as for example
    I have a friend who lives in the middle east &  has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver  or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ?  because this is U.S version  of imac then he might need an convertor?
    the same as if he want to record any hdmi or analog  device from his video recorder  device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
    so can you pls give me an advice for him
    should he buy the imac from the U.S store or the europe store ??
    N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
    and thank you

  • How to divide the video into frames?

    Hi
    I need to get the frames from a video file.There is a option j2me for getting one frame(getSnapshot) and at the maximum of ten frames using snapCtrl.
    By using snapctrl i can take only ten pictures.when snapctrl is executed the first ten frames gets extracted from the video.it stores the frames in root directory which causes some delay in execution of next statement.
    my problem is because of this delay 3 or 4 frames are missed when i try to continue get the frames in a loop.
    Is there any other method to get all the frames??please help

    The JSR seems to be good but that JSR intent is to support the higher end device models like the PDA's, device that come under the CDC bed, Higher end versions of the Nokia series 60 and 80.
    Anyways that method call definitely must have been implemented in native i.e java calling native and it completely depends on the how the native functionality is been implemented. JVM must wait untill the native functionality terminates. Based on that native delay your java code needs to be tweaked. But there is always a trade-off when it comes to memory on different devices.
    Thanks for your info.
    ~Mohan

  • Why is the video dropping frames after export?

    http://vimeo.com/65108558
    The video in question is in the above link. I am using PP CS5 with a new iMac i7 32gb cuda enabled. When watching the clips in the timeline everything looks normal. This video was encoded to h.264 max render quality with the vbr at 50.
    There has to be an issue with the export settings, as to why my exports looks like this. Any one who can help out would be greatly appreciated.

    May 2, 2013 2:02 PM 1st message 32 minutes later 2nd message May 2, 2013 2:34 PM
    This is a user to user forum, so it may very well take more than 32 minutes for some other user to try and help
    I am on Windows, so can't really help... you may need to wait for a Mac person

  • Voice over recording | Frames  Rate?

    I just bought a new mic for voiceover recording.
    I had to set my Voice over settings again in FCE. Also the frames and Rates.
    But I'm not really know what I'm doing.
    Could somebody explain to me what rate and frame I should choose for
    HD meterial? Would be realy helpful :>
    Tanxs!!

    I already red this article but I still don't know really wat Frames and Rate to use http://www.kenstone.net/fcp_homepage/basic_voice_over.html

  • Why won't my mini iPad record sound on the video recorder

    I'm trying to record a video, however my iPad wont record sound.  It will play sound in apps

    Hi Jen!
    I have a website here that I believe will help you troubleshoot this issue a little further. The website is our iPad troubleshooting assistant, and it can be found here:
    Apple - Support - iPad - iPad Troubleshooting Assistant
    http://www.apple.com/support/ipad/assistant/ipad/
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Why won't the video recorder work?

    I bought my 8G ipod nano a mere week ago, and whenever I try to record, the graphical lens opens and the little red light and timer come on, but the screen is black. It will even say it is recording, but I cannot see anything. If I then try to go back, the graphical lens closes and the ipod freezes and has to be reset.
    I just tried restoring it on a PC (it was previously set up on Mac) to see if anything would change. But alas, no success.
    Anyone know how to solve this one?

    Hi . I have the same problem as the 1st composer ,I followed all the trouble shooting steps and no joy , I have my nano 3days . Did you solve your problem & if so how ? Apple want me to commit to a payment of 147euro before they will accept it back to look the problem !

Maybe you are looking for