Is the Waveburner UPC/EAN bug fixed in Logic 9?

Still on Logic 8 in OSX10.5.8 over here.
Anyone seen this? In Waveburner, I go to (Disk->Disk Options->)
I enter the UPC code for the CD I'm authoring.
I click OK.
I go back to it (Disk->Disk Options->)
It's not there.
Has this been fixed in Logic 9? I found a few previous discussions on this topic but none were resolved. I'd appreciate it if anybody has a fix for Logic 8, or can check if this has been updated in Logic 9.

Hello Simon66,
It works ok for me in Logic 9. Don't remember if it worked for me in Logic 8 or not.
JG

Similar Messages

Where does NI hide the full list of bug fixes? and why is it hidden from users?

So I get an enticing email begging me to try the august 2009 release of LabVIEW. Ok. I'm twitching with anticipation. I'd like to know if several specific bugs are fixed in a new release of a specific module, however. Otherwise I'd prefer to install it some other time when I'm not busy writing dlls to compensate for the bugs that I hope are now fixed. I've been clicking in circles on the NI website trying to find complete information regarding changes and as is entirely far too typical of NI, I only have access to an anemic, watered down version of what should be proper documentation.
"LabVIEW Readme—Use this file to learn
important last-minute information about LabVIEW, including installation
and upgrade issues, compatibility issues, a partial list of bugs fixed
in the current version of LabVIEW... bla bla bla"
Where is the full list of bug fixes? I don't care if it isn't spellchecked or if it's sloppy; I just want the information. The readme you provide for the specific module I'm interested in is ridiculously small. I know darned well you must have changed more than what is listed. So what secret vault do I have to burgle to find the full list of bug fixes? Am I just missing an obvious hyperlink?
- mushroomed
Message Edited by Root Canal on 08-11-2009 11:29 AM
global variables make robots angry

Root Canal wrote:
Where is the full list of bug fixes? ...
They are locked-up in the Ivory Tower.
I have been a LabVIEW Champion for about four years and even after signing NDA's I still can't see the full list.
Seruously, the full list includes probably millions of bugs that NI finds internally before you and I ever see it.
The best way to handle your situation is to track the CAR's for your bugs. You can call NI support with the CAR number and they can tell you if the bug was fixed and in which version you will find the fix.
If it has not been fixed you can contact you rlocal NI rep and ask them to look into it for you. They may be able to tell you in which release the fix is scheduled and bump up the priority of the fix if you make a good arguement.
Just trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Sequence name changing to the CLIP name? BUG FIXED!

FCP 7.0.1 fixes quite a few things, including that annoying bug where the sequence name kept changing when you added new clips to it.
http://support.apple.com/kb/TS2521
Also fixes a couple speed change issues.
Shane

I believe the post was marked as a question.
The post title has a question also.
If you look at the top of this thread you will see
This question is not answered. "Helpful" answers available: 2 . "Solved" answers available: 1 .

After updating my iPod to the latest IOS 7 bug fix my music won't open or play!?

It just shows a blank white screen and then jumps to the home screen and then all by itself it switches back to the music blank again. I am using iTunes Match and have tried enabling and then disabling it. I have tried restarting my iPod several times. Nothing has worked so far.

- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Is this bug fixed in Logic 8?

Hello-
I use the 8 core with Logic, and have noticed and read that there has been a bug regarding Intel macs and SMPTE getting messed up in Logic when moving tempo maps around. I have been experiencing this myself and it is a major PITA. I am wondering if anyone out there is using Logic 8 with an Intel mac under these circumstances. I myself am slaving Logic to an other computer(with protools) via MTC, which has been giving me the issues. I actually have Logic 8 in my possession now, but can't install at this time because I am in the middle of a series of projects for picture.
Any experience with this would be appreciated. (I would ask mac tech support, but they don't have an answer for this situation)
Thanks in advance

No, this "bug" is not fixed in LP8 - so you still have to wait for long delays and reverbs to decay - have a cup of tea in the meantime or wipe the dust off your Monitor...

Two bug fixes in 1.03 firmware

It looks like the constant rebooting bug is fixed. I loaded something over with an equalizer set and nothing bad happened. The other more trivial bug fix is that world times now work properly if you are in a time zone where daylight savings time is set.
The bug where the date in the Date and Times settings always shows in US format is still there.
Michael

Sorry I missed the existing thread on this topic. Please reply to that one.
Michael

Feature/Bug Fix list for 10.2.0.4

I know 10.2.0.4 is expected in July. I'm currently running 10.2.0.3 and interested in it because it has a fix for Bug 5082178 - "Bind peeking may occur when it should not." I'm interested in knowing what other improvements it contains.
Can anyone point me to a list of features and bugs planned for the 10.2.0.4 release?
Thanks,

The README/ Metalink note for the patchset should include the list of all the bugs that are fixed. I don't believe Oracle publishes the set of bug fixes that will actually be part of the patchset until much closer to the release date since bugs fixes get added and removed during the final testing process.
Justin

Problems getting UPC/EAN codes to write in the mastering notes

I'm pretty sure this is simple pilot error, as I don't use Waveburner on a regular basis, but...
I was letting a friend who had to turn in some masters to a label use waveburner, as his system was temporarily down. He was given the UPC/EAN codes to enter onto each CD he had to burn (7 songs on each), and when we saved the mastering notes as a PDF file, it kept saying "none" where the UPC code was to go (on the mastering notes).
I did get it to save and print on 2 CD's, but 5 I could not. I admittedly have no idea why it was so inconsistent, but attributed it to my missing something simple. The manual had very little to say about this.
Has anyone else run into this? What am I doing wrong?
Hope this isn't to vague...

I too have complained about Datasocket error codes, messages, lack of ds browser, etc. NI said that they will hopefully have some inproved ds information in 6.1

HT1688 I updated my iPhone 5C to the iOS 7.0.1 "bug fixes" update and it has made my phone glitch constantly and has just made it a complete nightmare. How can I go back down to iOS 7?

basically yeah, I updated my software because it said that iOS 7.0.1 was out as a bug fixes update and now my phone constantly glitches the **** out, its super slow, and it pretty much created more bugs than it did fix them. So how can I go back to iOS 7? because 7.0.1 is an absolute nightmare.

Try updating to iOS 7.0.2.
Does your iPhone still have performance issues? Have you tried the basics?

Does anyone have problems occasionally with their slide to unlock on iphone 4s with the ios7 update? And do you think there will be a bug fix? Bit worried

Hi everyone,
I've recently updated my iphone 4s with the ios7 update and there was a bug fix I also downloaded recently but I hadn't noticed anything wrong at the time. I know it's not happened that often today but does anyone have any problems with their 'slide to unlock' button and have to reload their iphone again? Do you think there'll be a bug fix for it? Just worried as it's not old and I have a feeling I shouldn't have bothered with the update at all.

Why would you think it's a bug? If it were a bug EVERYONE would be having the same issue.
Basics from the user guide are restart, reset, restore from backup, restore as new.

[svn:fx-trunk] 10075: Cleanups from the spark text changes and some bug fixes for VideoElement.

Revision: 10075
Author:   [email protected]
Date:     2009-09-08 18:01:58 -0700 (Tue, 08 Sep 2009)
Log Message:
Cleanups from the spark text changes and some bug fixes for VideoElement. Also some PARB changes for UIComponent.
TitleBar: Changing the skin part type from Label to Textbase
UIComponent: skipMeasure()->canSkipMeasurement() to be in line with GraphicElement. This has been PARB approved.
UIComponent: same with hasComplexLayoutMatrix...this replaces hasDeltaIdentityTransform. This has been PARB approved.
StyleProtoChain: cleanup around what interfaces to use
TextBase: clean up code that?\226?\128?\153s no longer needed.
VideoElement: Fixing 4 bugs:
SDK-22824: sourceLastPlayed keeps track of what video file we?\226?\128?\153ve called play() with last. This way if a user pauses the video and wants to start it up again at the same point, we can call play(null) on the underlying FLVPlayback videoPlayer. However, anytime the souce changes, we want to null out sourceLastPlayed. This was causing a bug when someone set the source to null and then reset it to it?\226?\128?\153s previous value.
SDK-23034 (GUMBO_PRIORITY): This deals with some FLVPlayback quirks around sizing. I had put in a fix so we weren?\226?\128?\153t setting width/height on the underlying videoPlayer too many times, but apparently we need to make sure it always gets called once. Hopefully when switching to Strobe we can cleanup this logic...I put a FIXME in to do this.
SDK-21947/ SDK-22533 - some video files don?\226?\128?\153t always send out a metadata event. I?\226?\128?\153m not quite sure why this is, but in case this happens, we do a check in the ready handler to see whether we should call invalidateSize() to make sure it gets sized properly.
QE notes:-
Doc notes:-
Bugs: SDK-22824, SDK-23034, SDK-21947, SDK-22533
Reviewer: Glenn, Corey
Tests run: checkintests, Button, GraphicTags, VideoElement, and VideoPlayer (some VideoPlayer were failing, but I think it should be fine)
Is noteworthy for integration: Yes
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22824
    http://bugs.adobe.com/jira/browse/SDK-23034
    http://bugs.adobe.com/jira/browse/SDK-21947
    http://bugs.adobe.com/jira/browse/SDK-22533
    http://bugs.adobe.com/jira/browse/SDK-22824
    http://bugs.adobe.com/jira/browse/SDK-23034
    http://bugs.adobe.com/jira/browse/SDK-21947
    http://bugs.adobe.com/jira/browse/SDK-22533
Modified Paths:
    flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/windowClasses/TitleB ar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/StyleProtoChain.as
    flex/sdk/trunk/frameworks/projects/spark/src/mx/core/UITLFTextField.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Group.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Label.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichEditableText.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichText.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/GroupBase.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Skin.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/TextBase.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/supportClasses/AddActionInstan ce.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/supportClasses/AnimateTransfor mInstance.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/supportClasses/RemoveActionIns tance.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/VideoElement.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/GraphicEleme nt.as

Hi. Whenever I go through one of the menus in firefox, the links remain highlighted after my mouse passes over them. Is there a bug fix for this or is there something wrong with my computer? I am running windows 7 if that helps.

Hi. Whenever I go through one of the menus in firefox, the links remain highlighted after my mouse passes over them. Is there a bug fix for this or is there something wrong with my computer? I am running windows 7 if that helps. This problem started ever since I upgraded to version 5.

I have downloaded and used the iPod Reset Utility, alot that did. My current state is iTunes on my XP Home with SP3 sees the iPod. When I drag a song to the iPod, the Sync message appears for about 5 minutes, then the Apple symbol appears. But no song has been transferred to the iPod.
I tried to tap into the XP iTunes database from my iBook, but although it acted like it would add the XP library to the iBook library, it did not. I've got 19 Gs of songs on the XP. If I have to load each song from its original CD to get it on my iBook I'm going to start looking for some other app or device so that I can listen to my music.
It is a shame, in the old days, Apple techs use to look at what was going on, now it appears they don't, so they never know they have problems until Apple's profits fall.

Did bug fix for add-ons after downloading new version. FB games do not work & add-ons still gone. I want the old version back. How can I do this?

Downloaded version 7 today. All add-ons are gone, not disabled, but gone. The bug fix offered in this instance tells me to go look for updates. I have, and I'm totally up to date, so now I don't know what to do. The add-ons are still gone, and my games in FB are also malfunctioning. I click on a button in the game and nothing happens. I can't even play them like this. I have playing all morning, and this only happened AFTER I updated to the latest Firefox browser 7. I want the old version back, but cannot figure out a way to do this. I am mad right now and want the option to go back to the old version. If I can't get it, I guess I'll go back to IE. Thanks....

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Are bug fixes the same as crash fixes?

Are bug fixes the same as crash fixes? Or are they totally different?

Depends on the cause of a crash. If it is caused by a known bug or design flaw, then yes I supose you could say that. But strictly speaking, no. A "crash" is a symptom, not a bug.
If you post whatever issues you are seeing, someone may be able to assist.

Does 10.6.2 Fix the fluctuating mic volume Bug?

Has anybody installed 10.6.2 to see if this fixes the fluctuating mic volume bug in Ichat?

Fixes are detailed here: About the Mac OS X v10.6.2 Update.

Is the Waveburner UPC/EAN bug fixed in Logic 9?

Similar Messages

Maybe you are looking for