Is the whole OS universal?
With reference to this:
http://discussions.apple.com/message.jspa?messageID=4868806
Can I boot an Intel mac Mini from a bootable firewire drive image from my PPC PowerMac?
no you can't.
you need intel driver on your bootable image. your ppc image doesn't have it.
you can look at this:
http://www-personal.umich.edu/~admorten/CreatingUniversalTigerWithRadmind.pdf
Similar Messages
-
Does Universal Connector read only the changes or the whole of the database everytime
Does the Universal Connector read only the changes in the external database into the Connector View every scheduled cycle or does it read the whole of the database into the connector view every time ?
I need to write a indirect connector for Lotus Notes database using the universal connector and univeral text parse.So I want to know if the Import and Dump scripts that I will have to write will have to read just the changes that took place or the whole of the Notes DB everytime ?
-AparnaIf it is possible to get just the changes then do that.
-
How do i make the whole veiw of the computer smaller? it seems bigger than the whole screen
how do i make the whole veiw of the computer smaller? it seems bigger than the whole screen
often, this happens when you blunder into Accessibility/ Universal Access features, such as screen Zooming.
System Preferences > Accessibility/ Universal Access > Seeing -
hi- my new ipodtouch -screen is hiding part of each page-so it is hard to type,as the outermost symbols of the keyboard are missing.RESTORE and RESET have not helped.what trick can I use to bring the WHOLE page into view?Zooming in-out does not help--the edge of each page is out of view...
Any helpful advice/thanks..I sounds like you may have turn on the Zoom setting for accessibility. Tap the screen with three fingers and it should go to normal. Then go to Settings>General>Accessibility and turn Zoom off. You can also turn it of by connecting it to your computer and going to the Summary Pane and go to Universal Access and turn Zoom off.
-
When i move my wireless mouse, the whole screen on the computer moves...how can i fix this?
When i move my wireless mouse the whole computer screen moves. How can I fix this?
Welcome to the Apple Support Communities
It looks like zoom is turned on. To turn it off, open System Preferences > Universal Access, and turn Zoom off -
I had my mouse in the bottom left corner when I made a spreading motion with 2 fingers. The whole screen got really magnified. The reverse action did not put it back. How to I get back to the standard size home screen????? PS....I'm a new mac user..so no big words plz.
Head to the Apple menu > System Preferences > Universal Access (or Accessibility or whatever they call it now) and fiddle with the zoom settings.
Perhaps you should consider using a scroll wheel mouse and setting the Control key as it being held down to zoom in/out with the scroll wheel, that's what I do and it's a lot easier than using the trackpad.
Trackpads are more for like temporary portable and emergency uses as they are not that comfortable or easy to use for the long term. -
My MacAir is great except for a problem i have. Keys F1, F2,F5,F6,F7,F8,F9,F10,F11,F12 and the power button are unresponsive. These are keys i frequently use and i have searched the whole apple help centre. Anyone got answers for me? Please helP!!!
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Universal Access pane in System Preferences, click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use Mac OS X: How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
http://support.apple.com/kb/TS1381 -
How to delete THE WHOLE Reading List of Safari iOS 8 in one shot?
I know how to delete individual items one by one by sliding them to the left, I know how to clear their cache in Settings and I know how to clear Safari's history but nothing clears the whole Reading List in one stroke.
How do you do?
Thank you very much in advance for your answer.Please read this book.
http://www.amazon.com/s?ie=UTF8&rh=i%3Astripbooks%2Cp_27%3AMatthias%20Zierke&field-author=Matthias%20Zierke&page=1
Rg,
Harshit -
How to disable a single cell in a table (and not the whole column)
Hi there,
I've got a webdynpro table with a few columns, rows can be created dynamically through a button in the table toolbar.
Depending on the value of a certain cell I have to disable another cell (in the same row).
I tried to manipulate the view in the modifyview but no joy. I also tried to manipulate the attribute property through the coding below:
DATA lv_knttp TYPE knttp.
lo_nd_kostl = wd_context->path_get_node( path = `MULTIVALUES.KOSTL` ).
lo_el_kostl = lo_nd_kostl->get_element( ).
lo_el_kostl->set_attribute_property(
attribute_name = 'LTEXT'
property = lo_el_kostl->e_property-enabled
value = ''
but it disables the whole column!!!! I just need the cell to be disabled (I thought the code above, through the lead selection, would affect a certain cell only - but I was wrong).
Any ideas?
Thanks!!!Hi,
using cell variants you can do this.,
check this article: [Cell Variants in WDA|http://wiki.sdn.sap.com/wiki/display/WDABAP/WebDynproforABAPCellVariants]
Instead of binding the read only property of table as a whole , just bind the read only property of column group of table., You can do this bu drill down the table and select the required column and bind the read only column.,
then In onAction Event of button .,
loop the table, if condition satisfied set the read only property to true else false.,!!
hope this helps u.,
Thanks & regards,
Kiran -
So i took my Macbook Pro 13'' (Mid-2009) into Apple because the spacebar was jammed and I had one of the feet of the bottom casing missing which was unusual (black circles). The unibody and bottom plate had a fair few dents and nicks and under AppleCare I was able to get the whole unibody and bottom case fixed for free. Saved myself a good £181!
This now leaves my lid which has one or two noticeable dents and the bottom right part is suffering from several scratches. I was wondering how much a new lid would cost if I took it into Apple? I know it won't be covered under AppleCare as its accidental damage but want to know whether its worth paying for to have a once again dent free Macbook Pro .
As a side note, do Apple upgrade your hardware at all, such as the hard drive or memory? I know it would be cheaper to do it at an independant computer shop or by myself but would like to explore my options first.http://www.ifixit.com/
See my reply to your second question elsewhere. -
I made a 3-minute movie with my iphone 4S. When I attempt to share it via email or message I get a message that says it is too long, that I should try to make a clip. Of course I had rather send the whole thing. What are the possibilities? I think my music and likely my videos and pictures are in the cloud.
SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here. -
How to populate the whole path of the button in a field when the button is clicked.
Hi,
I have around 5 uploads in my file. I kept a hidden field on the header of the form. When ever i click on the upload button, the path of it needs to be populated in the hidden text field.
by using this.parent we can get the parent name of the element.
is there any method similar to the above one to get the whole path of the button????????Try putting this script in the click event of the button
Hidden_Text_Field_Path.rawValue=this.somExpression;
This ought to work using either FormCalc or JavaScript. I'm not sure from your description whether you will need to use the full path name for the hidden text field or use a relative one, but that's not too hard to deal with. -
I have an address book in Thunderbird and want to export one group listing to a .csv file. I couldn't find a way of exporting one group so exported the whole address book then opened the .csv file and was going to remove the all addresses except the group but the group name was not in the file.
Is it possible to export the group listing.
Thanks
RonOpen Address Book, select the mailing list in the left pane, then Tools/Export, select csv (comma separated) format, name the file, click Save.
-
How do I enlarge my web page to use the whole screen?
How do I enlarge my web page to use the whole computer screen?
Reduce dock size or hide same.
Also depends on what browser you're using all have full screen modes.
Safari :
http://support.apple.com/kb/PH11941
To enlarge an entire webpage so it uses the screen, click the arrows in the top-right corner of an app window: -
Generation of Annual Leave Quota at a time for the whole year
Hi All,
Kindly give some suggestions.
I am working on Time evaluation. We have a quota , Annual leave which is now given on monthly basis, means lets 12 annual leave are for whole year and employee are getting 1 leave on each month.
Now my requirement is to give this quota at a time in the start of every year. That means all the 12 annual leave should be generated in the start of a year.
When I select the option no pro rata calculation then I am getting all this leave in the start of the year. But when an employee is joined in the mid of the year then also 12 leave is been generated which is not correct.
Please suggest me how to make this leave as prorated so that for new joinee , this leave is generated taking into account the period and generate the prorate value for the whole year at the time of joining.
Thanks
Tanuja.Hi Sikinder,
I am using + time evaluation Status-2. We have to generate quota in PT60 for each period.
Write now we are getting annual leave quota getting generated in monthly basis. We want to genarate whole quota for the year in the 1st month of the year.
When I have given calender year in the accrual period , i am not getting any quota in the 1st month rather getting the whole quota in the end of the year.
Please suggest me what to do.
Regards,
Tanuja.
Maybe you are looking for
-
How can we delete the icloud accounts from main website.Iam trying to log in to my account and it says that MAXIMUM NUMBER OF FREE ACCOUNTS ARE ACTIVATED?What can i do guys plz tell me?
-
Is there a smart way to convert People annotations in iView to Keywords in Lightroom?
I have annotated several thousand pictures in iView using "People". I can see this in PS or Bridge if I use File Info. But i have to look in the Advanced section of the XMP reader. As I have started to use Lightroom I would like to transform the "Peo
-
Hi, I am very new to TRM. I have known that creating ADobe forms is relatively simpler in TRM, as EHP5 provides with the Business Client. However, If I need to integrate Web Services, the approach I'm aware of is to cerate a Web Dynpro application, a
-
Background color on today's date changeable?
I'd love to be able to see today's date better on my iCal. I know other people had requested the ability to be able to set the dimness or density of the color of our today, but there still doesn't seem to be a way, and, if anything, it looks even dim
-
JSlider - How to hide the knob?
Hi everyone, I'm currently trying to figure out how to hide a JSlider's knob. I need to hide the knob when no default values are defined. The knob must then reappear once the user clicks on the JSlider. Is there a way to do so? I've looked through th