Is the WIFI Wien in Austria accepted as an educational institution?

hi,
is the WIFI Wien in Austria accepted as an educational institution? Can I as a teacher from the WIFI Wien buy the creative cloud teacher edition?

hi,
is the WIFI Wien in Austria accepted as an educational institution? Can I as a teacher from the WIFI Wien buy the creative cloud teacher edition?

Similar Messages

  • TS1398 tonight i have upgraded my Ipad2 to ios 6 by it's own wifi,after compete downloading and installation the wifi password is not accepted by ipad2,i have tested so many times and i entered password correctly.please help

    tonight i have upgraded my Ipad2 to ios 6 by it's own wifi,after compete downloading and installation the wifi password is not accepted by ipad2,i have tested so many times and i entered password correctly.please help

    are other things still connecting to the wifi without a problem?
    Have you tried resetting network settings, then unplugging modem and router from power for 40 seconds then plugging back in letting the lights stabilize and Then recconecting with the ipod>?

  • My iPod touch 5gen sees the wifi but does not accept the password

    My iPod touch does not accept the password for my home wifi but can connect to other wifi like Best Buy's.

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Wifi password is not accepted

    Every time I try to connect to my wifi connection the password is not accepted. I've tried everything, changing from wep etc

    Are you referring to the WIFI password not being accepted? Your question is not clear.

  • Trying to set up my brand new MacBook Pro and it does not connect with the wifi network I have selected for this purpose. Nothing wrong with the wifi as both my iPad and iPhone are happily connected. Suggestions for connecting to the wifi network accepted

    Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.

    Fixing this is a two step process:
    1) System preferences > WiFi/Airport ...
    ... check [√] Ask to join new networks
    "Known networks will be joined automatically.
    If no known networks are available, you will
    be asked before joining a new network."
    2) Remove unwanted networks from the list of "known" networks under
    System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
    Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules.

  • The iphone 3GS dosen't accept the SIM card and the WIFI and Bluetooth is hidden..Please give me answer ..

    the iphone 3GS dosen't accept the SIM card and the WIFI and Bluetooth is hidden..Please give me answer ..

    is the iphone sim locked to another network?

  • TS1398 my iPad isn't accepting the wifi code - states it is wrong password, though it is the same on my iPhone and laptop. Toggled wifi off/on, tried 'forgetting network' and not getting the option. IP address etc fields all blank

    my iPad isn't accepting the wifi code - states it is wrong password, though it is the same on my iPhone and laptop. Toggled wifi off/on, tried 'forgetting network' and not getting the option. IP address etc fields all blank

    WiFi Troublshooting
    iOS: Troubleshooting Wi-Fi networks and connections
    Is this happening with one particular network or with all?  Make sure iOS is updated on the device.
    Try this:
    Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
    Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
    Reset Network Settings
    Go to settings/general/reset/reset network settings. Then try to connect to network.
    If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
    If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions).
    Wifi Settings greyed out or dim
    http://support.apple.com/kb/TS1559
    Recommended wifi settings
    http://support.apple.com/kb/HT4199

  • HT1338 After starting to download the Mountain Lion software, my wifi connection was disconnected. When I attached the ethernet cable, the downloading software was gone, and when I tried redoing the process, the app store would not accept the code. What d

    Hey,
    I just tried redeeming my software online. I went through the whole process, got the password, and proceeded to get the software to download. But soon after, the wifi connection was disconnected, and when I tried to connect the ethernet cable, the entire software had disappeared from my launchpad. When I tried to restart the download, it kept saying that the password had already been used before, and that it could only be used once per computer. What do I do now?

    You shouldn't have to re-enter the code, Lion should be on your purchases list so you can re-download it.  In the App Store, click Purchases...  do you see ML there?

  • My iPod shows my wifi but won't accept my password- even though i'm reading straight off the router?

    the other day my iPod said that my home password was incorrect for the wifi connection- even though i've been connected to this network for well over a year now. when i try to enter the password on the side of the router it continues to read incorrect, i've tried mannually entering the connection without success. help?

    - Reset the iPOd. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    Are you sure that nobody changed the password?

  • I am trying to figure out what the wifi password is for the printer

    When i open up my settings on my galaxy s5 and scan for the wifi connections the printer shows up but its asking for a password. How do i find out what the password is. Can you please help me out i  would appreciate it. Thanks also it's an android phone as i mentioned earlier (Samsung galaxy s5)

     If you are printing to your home network, this is likely the wireless password to your network - the password you use to access your router, for example. How to find your wireless network password Additional Help:Add Device to Printer See Section titled > Mobile Device / iPad gets an App >>News for Android, Samsung Galaxy Note, HP Slate SeriesWhen you see a Post that helps you,Inspires you, provides fresh insight,Or teaches you something new,Click the "Thumbs Up" on that Post. Click my Answer Accept as Solution to help others find Answers.
      

  • HP C7200 All-in-One printer will not print through the Wifi network

    I have used the HP printing and scanning Doctor but none of the proposed solutions have solved the problem. The blue light for wirelwss 802.11g service is on and connected to the same Wifi address as my laptop is using now. My Dell laptop is running Windows 7 and the printer works if I use the USB connection instead of the Wifi.  Any suggestions?
    Larrypat
    This question was solved.
    View Solution.

    Welcome to the community @Larrypat 
    I understand your printer is not connecting wireless and only connecting USB. I have some questions and ideas for you that should help. Let's get to it!
    Could you please remove the USB cable, run the Print and Scan Doctor again and send me a screen shot of the results from running the diagnostic tool?
    Also let me know which model from the C7200 series you have:
    HP Photosmart C7250 All-in-One Printer
     HP Photosmart C7280 All-in-One Printer
     HP Photosmart C7288 All-in-One Printer
    Try power cycling the network devices:
    Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
    Plug the router back in and wait another minute, next turn on the printer and computer. Run the Print and Scan Doctor afterwards and try printing.
    Let me know how it goes and the results
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Why is apple releasing the ipad4 witha new and inproved wifi attena without addressing the wifi issue in the ipad3

    Why is apple releasing the ipad4 witha new and inproved wifi attena without addressing the wifi issue in the ipad3

    Jim Level 5 person ....I am very happy for you that your usage will not be affected, please accept my  congratulations.
    Now I have to point out that going ballistic has certain connotations but posting on an internet forum is not one of them.
    I appear to be one of thousands who are all expressing their outrage in a rational and intelligent manner which cannot be said for your lebvel 4 + collegues on this forum.
    Finally there has been an ongoing issue wiith the iPad 3 Wifi on certain wifi only models , I have not encountered it and it seems clear neither have you. That of course does not discount the fact that many others have experienced this issue , an issue which may reveal itself to you or I in the future particularly as I have only been using mine for a fortnight.
    The following is a relevant link for your information :
    http://9to5mac.com/2012/04/04/apple-investigating-new-ipad-wifi-issues-tells-app lecare-to-replace-affected-units/

  • My ipod won't allow me to enter the wifi code needed through Safari?

    I've reset it, I've reset network settings, forgotten the network, etc. with no joy.
    The wifi is accessed through a password, which the ipod accepts, but then you have to log in through safari and enter another code but safari won't bring up the log in page. I wouldn't mind but it was logging in perfectly all week and just STOPPED on saturday for no reason.
    Can anyone help please?

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Safari and Clear Hisitor, Data and Cookies
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.

  • I can't use the wifi after 10 pm, but i can use it again at 7 am?

    so for some reason, i can't use my wifi after 10 pm. but in the morning when i wake up, i can use it again. is this some parental control or something? please lead me through it. i can't really ask my parents to do it, because they're not technologically advanced. they can probably give me the basic like the password and all, but that's it. how can i fix it? i'm using the wifi on an ipod touch. the wifi works perfectly fine on a regular computer but it doesn't work on my ipod during those certain hours. can someone please help me?
    the wifi icon shows up in the upper left corner, but its obviously not connected. there are no restrictions on the ipod at all.
    any other details you need, please ask. i really need this solved!
    Message was edited by: teedeexx

    i'd definitely say it was a wifi thing rather than an ipod thing. as far as i can think of there would be no way to tell an ipod to only access the internet between 7am and 10pm. - unless you were to restrict it using the router (i imagine this COULD be possible, but don't know if it actually is).
    everything which accesses the internet is given an individual 'mac address'. so if you have say, 3 computers, an ipod, a games console, all accessing a wifi network, that router will recognise them all individually by it's individual mac address. you can use mac filtering to give you an extra level of security to your network. so even if the correct network password is entered onto a wifi enabled piece of technology, if the router hasn't got the mac address entered as one that it should accept, you won't get access to the network.
    i must reiterate, i don't know if you can do this, but i would think it may be possible to restrict a certain mac address from accessing the network at certain times of the day (for example a young kid who may be playing with their ipod in bed, but should really be asleep!)
    if you go into the settings option on your ipod, general, restrictions, you can play around with your own restrictions and see what they do. mostly they restrict complete access, or the download of explicit content.

  • Can't See The Wife Any More

    We have an iMac 24 (Intel) with built-in iSight in our kitchen in the house. I have a G5 (no camera) in the office (same network). We're both on Tiger.
    For a couple of years my wife has been able to call me up via Bonjour and I can see her in the iChat window. Just recently the connection still works for audio but I can't see her any more. She can see herself in the iChat window and I get an iChat window but mine is just a blank white space – no darling wife.
    I've checked the preferences but can't see that anything has changed.
    Help appreciated.
    Bob.

    Thanks but no that didn't work. However I've established that it's 'my end' i.e. it's the G5 that's not playing ball.
    I also have a MacBook Pro in the office (Leaopard) and tried a one-way-video from that machine to the G5 (after setting the preferences and re-starting iChat as you suggested) and the result is the same.
    It sounds like it's going to work, I get the dull chime when I accept the Video Chat but just the same shortened white screen.
    So I tried a video chat (two way) between the iMac and the MacBook Pro and that works fine. (I thought I'd also try a one-way-video chat form the iMac to the PowerBook but there's no option for this – the little devil must know the PowerBook has a camera.)
    Bob.

Maybe you are looking for

  • File adapter polling stops after reboot of third party system

    Hi, We noticed that whenever we reboot our third party system, XI File Adapter is losing it's connection to that third party system and polling stops. As a result File Adapter is not processing any files from that particular server. To fix this probl

  • Creative suite 4 "unattended" install

    Im trying to deploy cs4 silently, but with a progress bar so users can see when it is finished installing (unattended). I know you could do that in cs3, but apparently from what ive found they dont do that anymore in cs4. Unless they have another mod

  • Group by + aggregate function / report

    Helloo, we have a report with following sql statment SELECT "SPREEDSHEET_TABLE"."SCHEMA_NAME" "SCHEMA_NAME", "SPREEDSHEET_TABLE"."DATABASE_NAME" "DATABASE_NAME", "SPREEDSHEET_TABLE"."SERVER_NAME" "SERVER_NAME" ,max(CURRENT_DATE) FROM pritesh.SPREEDSH

  • "umeric or value error" in user function

    Hello everyone, I wrote a very simple function which purpose is to format a Date (e.g. 31-12-2011) into this form: 2011-12 create or replace function inv_date (v_billing_month date) return number is begin return to_char(v_billing_month,'yyyy-mm'); en

  • Mx:tree problem

    Hello all, I'm novice in Flex and I would like to know how to show my hard disk tree in a mx:tree. Is it possible?Is anyone could help me? Thank you.