Is "the winger" commercial true?

on the commercial with the girl saying she uploads photos to her blog from her iphone - is that true? because i dont know of a way where you can upload files to a website from the phone...i went to the website she mentioned - www.thewinger.com - and her pictures were obviously taken from the iphone cz of the quality. how do you upload pics to sites on it? im confused

Some blog sites allow you to upload via special email accounts. I believe Facebook has the feature where you email a picture to to your account, but to do so you have to setup the service with Facebook (http://www.facebook.com/mobile/?uploads). Some sites charge you some sites offer it free.
With Facebook, you register your mobile number with the site and whenever you message their special number it directs your SMS to the proper directory. However, since iPhone doesn't support MMS, uploading photos would be through email. Facebook also offers you a way to email the photos specifically.
Message was edited by: BigT_NYCOM

Similar Messages

How to get the value incremented only when the loop is true?

Hi,
From the snapshot attached, i want to increment the value of number indicator only once when its true and should increment the value again when the loop is true..i mean i want to get the number of times the loop is true.
But in this vi i am getting the value incremented many number of times when the loop is true because the while loop is running continuously.
Attachments:
labview.docx ‏54 KB

muralicgowda wrote: From the snapshot attached, i want to increment the value of number indicator only once when its true and should increment the value again when the loop is true..i mean i want to get the number of times the loop is true.
But in this vi i am getting the value incremented many number of times when the loop is true because the while loop is running continuously.
A loop is a structure and not a boolean, so it cannot be false or true and thus I don't understand the question!
Why don't you attach the actual VI instead of a word document? Your code is very difficult to understand because it seems to suffer from severe localitis, and some of the few visible terminals don't show a label. What's in the other cases of the case structures?
Incrementing a value is better done in a shift register or feedback node. What's the purpose of the "absolute value" function. As long as you make sure you don't start with a negative value, it should not be needed. If you are looking for a off-on transition, try "implies" with the current and previous value of the boolean. (For an example, have a look at this post and the quoted example in it.)
Message Edited by altenbach on 01-21-2010 08:47 AM
LabVIEW Champion . Do more with less code and in less time .

Color .jpg/.gif images in the .CHM and true (4BPP/8BPP) grayscale in Printed Output?

I do all my document creation in RH first, then output
WinHelp and to Word 2003. I want to keep color images in the CHM
and have a majority of the images become true monochrome grayscale
in the Word doc.
Yes, Word does have a nifty "grayscale" optopn for each
image, but it leaves the color "channels" (24BPP) and so our color
copier still prints page using all CYMK colors (and it never seems
to get "true" grays anyway...)
If I could somehow get monochrome grayscale images in RH,
where there is already color ones - I could save as "monochrome"
and "color" outputs.
Any ideas, hints, batch files, suggestions or comments?
Thank you!

On second thought... it's the Fiery controller in the copier
that's doing all the deciding on what's what, and unfortunately
"that's not my department", so at this point, the question here is
moot - it's not a RH issue.

What app is used in the new commercial to show cells undergoing mitosis?

What app is used in the new commercial to show cells undergoing mitosis? I teach Biology and would love to find this one!

I was going by this page - http://www.macrumors.com/2013/02/17/apple-posts-new-alive-ipad-television-ad/
And I found these on Vimeo's web site
http://vimeo.com/53812680
http://vimeo.com/15357750
And they have a bunch more, just search for mitosis on their web site.

Focus lost in Date Field when the property autosubmit="true" is added

Hi,
I am using jdeveloper version 11.1.2.0.0.
The issue I am facing is when I add the property autosubmit="true" for a date field and if I am selecting a date value using date picker, the focus is lost for the date field. But when I remove the property autosubmit="true" for the date field and if I am selecting a date value using date picker, the focus stays in the date field. This I tried in sample application with the default converter and validator. Anybody can help me with this issue?

Hi,
there is a preSubmit event for form objects you can use.
Select your date field, open the script editor and add this script (language is FormCalc) into the preSubmit event.
$ = num2date(date(), "MM/DD/YYYY")

Which of the following are true about abstract methods in EJB 2.0

Hi guys I'm beginner to EJB and i got some unanswered questions.
Can any one of you please.. give answers?
Thanks if you do...
Which of the following are true about abstract methods in EJB 2.0
CMP?
Choose all correct answers:
1. Abstract accessor methods should not be exposed in the EJB
component's interface
2.Abstract accessor/mutator methods are used to access and modify
persistent state and relationship information for entity objects
3.Abstract Accessor/Mutator methods do not throw exceptions
4.The EJB developer must implement the Accessor/Mutator methods
5.Abstract accessor methods may or may not be exposed in the EJB
component's interface
2.Which ONE of the following is true?
Choose the best answer:
1.Local interfaces cannot have a relationship with other Entity
components
2.Local interfaces cannot be used for Stateless Session EJB
3.Local interfaces can be a part of Object's persistent state
4.Local interfaces have the same functionality as that of a
stateless Session EJB
3.Which of the following describe the <cmr-field> in a EJB 2.0
descriptor?
Choose all correct answers:
1.A Local interface/Entity can be a value of a <cmr-field>
2.There is no <cmr-field> in EJB 2.0 descriptor
3.It is used to represent one meaningful association between any
pair of Entity EJBs, based on the business logic of the Application
4.It provides a particular mapping from an object model to a
relational database schema
5.It allows the Local Entity interfaces to participate in
relationships
4.Which of the following are the advantages of using Local interfaces
instead of dependent value classes?
Choose all correct answers:
1.Local Entity Interfaces can participate in Relationships
2.The life cycle of Local Entity Interfaces is managed by EJB
container, intelligently
3.Local Entity Interfaces can be used in EJB QL Queries
4.Local Entity Interfaces can be a part of the <cmp-field> but not
<cmr-field>
5.Which of the following are true about Local interfaces
1.A local interface must be located in the same JVM to which the EJB
component is deployed
2.Local calls involve pass-by-reference.
3.The objects that are passed as parameters in local interface
method calls must be serializable.
4.In general, the references that are passed across the local
interface cannot be used outside of the immediate call chain and must
never be stored as part of the state of another enterprise bean.
6.Which of the following specifies the correct way for a client
to access a Message driven Bean?
Choose the best answer:
1. via a Remote interface
2. via Home interface
3. Message driven bean can be accessed directly by the client
4. both 1 & 2
5. none of the above
------------------------------------------------------------------------7.Which of the following statements are true about message-driven
bean Clients?
------------------------------------------------------------------------Choose all correct answers:
They can create Queue and QueueConnectionFactory objects
They can create Topic and TopicConnectionFactory objects
They can lookup the JNDI server and obtain the references for
Queue and Topic and their connection Factories
Only 1 and 2 above

Hi guys I'm beginner to EJB and i got some unanswered
questions.
Can any one of you please.. give answers?
Thanks if you do...
Which of the following are true about abstract methods
in EJB 2.0
CMP?
Choose all correct answers:
1. Abstract accessor methods should not be exposed
d in the EJB
component's interfacefalse
2.Abstract accessor/mutator methods are used to
access and modify
persistent state and relationship information for
entity objectstrue
>
3.Abstract Accessor/Mutator methods do not throw
exceptionstrue
>
4.The EJB developer must implement the
Accessor/Mutator methodsfalse
5.Abstract accessor methods may or may not be exposed
in the EJB
component's interfacetrue
2.Which ONE of the following is true?
Choose the best answer:
1.Local interfaces cannot have a relationship with
other Entity
componentsfalse
2.Local interfaces cannot be used for Stateless
Session EJBfalse
3.Local interfaces can be a part of Object's
persistent statefalse
4.Local interfaces have the same functionality as
that of a
stateless Session EJBtrue
3.Which of the following describe the <cmr-field> in a
EJB 2.0
descriptor?
Choose all correct answers:
1.A Local interface/Entity can be a value of a
<cmr-field>true
2.There is no <cmr-field> in EJB 2.0 descriptorfalse
3.It is used to represent one meaningful association
between any
pair of Entity EJBs, based on the business logic of
the Applicationtrue
4.It provides a particular mapping from an object
model to a
relational database schematrue
5.It allows the Local Entity interfaces to
participate in
relationshipstrue
4.Which of the following are the advantages of using
Local interfaces
instead of dependent value classes?
Choose all correct answers:
1.Local Entity Interfaces can participate in
Relationshipsis
2.The life cycle of Local Entity Interfaces is
managed by EJB
container, intelligentlyis
3.Local Entity Interfaces can be used in EJB QL
Queriesnot
4.Local Entity Interfaces can be a part of the
<cmp-field> but not
<cmr-field>not
>
>
5.Which of the following are true about Local
interfaces
1.A local interface must be located in the same JVM
M to which the EJB
component is deployedtrue
2.Local calls involve pass-by-reference.true
3.The objects that are passed as parameters in local
l interface
method calls must be serializable.false
4.In general, the references that are passed across
s the local
interface cannot be used outside of the immediate
e call chain and must
never be stored as part of the state of another
r enterprise bean.true
>
6.Which of the following specifies the correct way for
a client
to access a Message driven Bean?
Choose the best answer:
1. via a Remote interfacefalse
2. via Home interfacefalse
3. Message driven bean can be accessed directly by
the clientfalse
4. both 1 & 2false
5. none of the abovetrue.
>
----------------7.Which of the following statements
are true about message-driven
bean Clients?
----------------Choose all correct answers:
They can create Queue and QueueConnectionFactory
objectsthe container can, dunno bout clients
>
They can create Topic and TopicConnectionFactory
objectsthe container can, dunno bout clients
>
They can lookup the JNDI server and obtain the
references for
Queue and Topic and their connection Factories
true
Only 1 and 2 abovefalse
somebody correct me if i'm wrong

Where in iTunes Store can I find the song from the iAd commercial?

Where in the iTunes Music Store can I find the awesome background score / song from the iAd commercial featured on http://advertising.apple.com/?
Does anyone know the artist / album? Is it a GarageBand original song?

Wikipedia has an interesting list of songs used in Apple commercials, although it does not seem to have caught up with the iAd ad yet.
The album I was thinking of (which is similar to what is in the commercial) is Tron: Legacy (Original Motion Picture Soundtrack), available on iTunes, at least in the USA store.
The songs in the commercials are always so good, they should find a way to make it easy to do a quick purchase.

I recently upgraded iPhone4S to iOS7. Now photos on my phone look like photo negatives; all colors are a ghostly contrast. The same is true for icons of downloaded apps. What can I do?

I recently upgraded iPhone4S to iOS7. Now photos on my phone look like photo negatives; all colors are a ghostly contrast. The same is true for icons of downloaded apps. What can I do?

Invert the colors back to normal.

Export Stage Only - Not The WIngs

Hi
I have a FLA file with animation. Some obects in the
animation exit the stage.
When I export the movie, embed the SWF in a web page with DW8
and then view it, I can see the "wings"
That is, Flash has exported more than just the confines of
the stage.
Why is this? How Can I fix it?
Using Flash 8 and DW 8.
Thanks
c

Thanks. I'll try that.
I still find it bizarre that Flash publishes the pasteboard
(what I called "wings" yesterday).
What is the point of differentiating between Stage and
Pasteboard when Flash just publishes everything?
There seems to be nothing helpful in the publish settings as
I had already looked there.

Error: this type needs one of the following values('true','false')

I'm trying to use <c:if> in a jsp (in Workshop 8.1), as in:
               <c:if test="1 == 1">
          
          </c:if>
          But, I get the following message when I hover over the error indicator
          at the test:
          Error: this type needs one of the following values('true','false')
          It will actually work if I do:
               <c:if test="true">
          
          </c:if>
          but, of course, that's useless.
          Am I missing something here?

David Karr wrote:
          > The value of the "test" attribute needs to be an Expression Language expression. Try changing it to "${1 == 1}", and that should work.
          Actually, I had tried that, and it would have worked that way if I had
          the right taglib declaration -- I had accidentally left in the rt
          versions, so a <%= test %> type of expression worked.
          But, that's not the way I wanted to do it, so I put the non-rt versions
          in, along with tld and jar files that I had in some other directories,
          then it worked fine. In the process, when searching my hard drive for
          standard.jar, I noticed I had four or five different versions, each with
          a slightly different size. Of course, I had to tinker, and downloaded
          the zip from Apache, figuring it would be best to have a matched set of
          tlds and jars.
          And now I get an error that the matching class cannot be found:
          > ERROR: response.jsp:1: Package org.apache.taglibs.standard.tag.el.core contains no member type of this name.
          and
          > ERROR: response.jsp:14: The tag handler class was not found "org.apache.taglibs.standard.tag.el.core.IfTag".
          But, if I navigate the standard .jar that is in my WEB-INF/lib
          directory, lo and behold, there is the file IfTag.class in what appears
          to be the correct package.

How to count the number of 'True' outputs from an 'Equal?' function?

In my program, I have an 'Equal?' function which returns 'True' whenever x=y. How can I count the number of 'True' and display? I mean, for example, when it say True, the counter should display '1', when it say true next time the counter should display '2', like wise 3, 4.... so on. Can any one help me to do this? Is there any function which conts and display the number of 'true' outcomes?

Is your event structure in a while loop? Then that's where the shift register can go. But for portability a feedback node can be used if the VI is not reentrant.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

What's the best commercial clean up tool for the hard drive.

What is the best commercial, clean up tool for an internal hard drive. Mine is rapidly being filled and I'm at a loss as to how to clean it up. I don't know what apps, downloads etc are current or pertinent. I suspect that I have a lot of redundency, but I'm not confident in knowing what they are. My hard drive is approx. 93% filled and I'm rather concerned.

I downloaded the free trial of EasyDuplicatFinder and tried it. Works great and is pretty easy to get the hang of it. Found lots of iTunes duplicate songs that I dumped and freed up quite a bit of hard drive space. Check it out.
http://www.easyduplicatefinder.com/

Siri help! so i saw on the siri commercial where the guy says text my wife, tell her ill be late or whatever. i tried it with my girlfriend but it says i dont know who your gf is. how can i set it up so it knows?

so i saw on the siri commercial where the guy says text my wife, tell her ill be late or whatever. i tried it with my girlfriend but it says i dont know who your gf is. how can i set it up so it knows?

Say to Siri "My girlfriend is Jane Doe" or whatever her name is in your contact list. Now would be a good time to read the manual. There's a bookmark for it in Safari on your phone.

The iPhone Commercial Ringtone: How do I get it?

I would love to have a "normal" ringtone. Does anyone know how I get the ringtone from the iPhone commercial? I like that one. Thanks!

Thanks, Tamara. I'm looking through Garageband now (not the one from iLife 09, but the version before that). Can't seem to find that. Any thoughts?
Thanks,
Ryan

HT1529 If I do not have the macbook with me and in the bill is not writing? How to get the Serial Number true Itunes?

If I do not have the macbook with me and in the bill is not writing? How to get the Serial Number true Itunes?

https://support.apple.com/kb/HT2526

Is "the winger" commercial true?

Similar Messages

Maybe you are looking for