Is the XSKey in Logic 9 still necessary
Do I still need my XSKey with Logic 9 (I had it from Logic 7)?
I took it out and Logic still seems to work.
If Logic Pro 9 is a full new application or an upgrade, it is in itself a full application and requires no earlier version of Logic or an Xskey. Contrary to the install instructions which are wrong.
I have a new Mac Pro and installed an upgrade from LP7 to LP 9 and it required no Xskey or LP 7 or 8.
It works perfectly and imports projects from LP 7.
And just for good reason I installed OS 10.5.8 (Leopard) and I don't have any of the issues that appear on the forum with people running 10.6 SL
All the best and long live Logic Pro, 7 or 9
Similar Messages
-
I tried installing a program but when i open logic and scan the audio units, it doesnt come up. Even if i change the bit mode, it still doesnt show up. I even tried restarting my machine..Can anyone help me or give me some ideas.
i just wanna get this plugin to work.Have you confirmed that the plug-in installed to one of the locations where Logic might find it? Most plug-ins go to /Library/Audio/Plug-ins/Components. Some (rarely) install to ~/Library/Audio/Plug-ins/Components (where "~" is your user folder). Look in both locations and see if the plug-in is actually there.
When installing plug-ins, if you are offered options as to what format to install, be sure to include Audio Units. Logic will not see other formats like VST, RTAS, AAX, TDM, etc. If you use other software that recognizes those formats, it's fine to install them too, just be sure you don't deselect Audio Units.
Finally, if you're sure the plug-in is installed to the right place, open the Audio Units Manager in Logic and check to see if the plug-in passed validation. Go to the main menu and choose Logic Pro > Preferences > Audio Units Manager. Check to see if your plug-in is listed there. If there's not a check mark next to it in the "Logic" column, that means it failed validation. If so, the "Compatibilty" column will tell you why. Keep in mind that if the AU is 32-bit, you have to launch Logic in 32-bit mode to see it here. Likewise, 64-bit plug-ins show up in the manager in 64-bit mode. -
my computer has been seen at Genius bar 6 times for freezing up, reloaded all original settings, all of their diagnostics, and they even sent it to the apple shop where they replaced the battery and logic board. Still freezes after I try to reload iTunes stuff and app stuff from apple, especially iPhoto which is seems to refuse to load and then begins freezing up all over again. Anyone else have this problem. Other than this, I have had absolutely no problems with this computer. Now, it's a file of junk.
Hi Ronald ...
Have you checked lately to see how much free space there is on the disk? Especially since iPhoto freezes at launch ...
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space.
And make sure the OS X software is up to date.
Click the Apple top left in your screen.
From the drop down menu click: Software Update
If you have anti virus software installed or are using third party Mac cleaning utiliites, that may be part and parcel of the your problems. -
Is an audio interface still necessary?
I am using
Logic Pro X, Samson L2400 24 channel mixer connected via USB, is an audio interface still necessary to record all 24 tracks separately?
Noob hardly expresses my incompetence here so thank you for your patience.MacDyver wrote:
I am very appreciative for the assistance however it confuses me slightly more in that I do have a Roland Octa-Capture however it also connects via USB. I guess it is also useless
Articles I read state USB can theoretically carry 255 channels but everything else points to L/R Stereo.
It appears a fire sale is in order and purchase of a firewire mixer or interface may be my only option
Thanks everyone hope I can find a solution
I don't quite get your conclusion: the fact that an interface connects via USB, does not make it useless. And according to a quick look at specs the octacapture aka UA1010 has 10 inputs; you could aggregate that with the Samson and another interface with at least 12 inputs, and there you have your 24 inputs: 10 from the UA1010, 2 from the Samson itself, and 12 from whatever extra interface you'd use.
Getting one interface with 24 or more inputs may be a more secure and simpler route to take though.
I also don't get why you almost blame our appreciated assistance - by "howevering" it - for confusing you about your 10-input audio interface, when you never even mentioned you had it in the first place? -
The Problems With Logic (as I see them) - PART TWO!
Hello again,
It seems to be a tradition now that as I compose on a track, I keep a text editor open so that I can jot down all the annoyances and problems that I encounter during my creative process... Anyone who missed the previous edition of this topic, please visit PART ONE, here:
http://discussions.apple.com/message.jspa?messageID=3605456#3605456
That said, here I give you "The Problems With Logic Part II":
1. Logic should clear the playback buffer everytime you play. Quite often you start playing and there is trailing reverb/note events from various audio instruments and plug-ins.
2. The sample edtor "save selection as" has no memory of where you previously were in the file browser.
3. If you double click on a wave form, the sample editor opens up with the wave form you double clicked on... Great.. But now, if you go and double click on another wave form somewhere, it just takes you back to the sample editor with the same previous wave form selected (not great). This is incredibly annoying if you are attempting to save out certain edits-- Quite often you will end up saving 5 or 6 of the same exact waveform, thinking you were saving each individual one. GRR!
4. Key commands.. if you try to assign a key command to something that is already used by another feature, you are presented with a window warning you that it already exists.. If you click cancel, then you can no longer enter any keys in the key field.. You are forced to close the key commands preferences window and start over.
5. Key command window: You should be able to search by command.. For example, if I want to find out what "o" is assigned to, I should be able to search by O-- Further, you should be able to sort the key commands by clicking the column titles "key", "command" -- or "midi"... After all, we can sort by name, date, size, etc in the finder by clicking on these column titles.
6. Tempo Tap feature-- I am quite confused by this. There should be a simple way to tap and define a tempo. When ever i try to do this, the tempo is only temporarily changed until I stop playing, and most of the time I get error alerts about trying to sync audio and midi (mind you, when there are absolutely no parts in the entire arrange window). The manual states that with "tempo recording" checked on the tempo interpreter window, that the taps will record tempo changes, but this does not work. I tried doing this, tapping the key command I defined to tempo tap (ctrl-shift-t), and I was tapping at various speeds-- many taps fast.. and Logic recorded tempos of 99-101bpm.. I was tapping atleast around 175-180bpm. I then tried tapping slowing, and Logic recorded tempos of 99-101 again... so this feature obviously is full of bugs.
7. When loading songs, as soon as various plugins such as Kontakt, exs24 begin loading samples, it brings logic to the front. If you're working in the background in other applications while waiting for your songs to load, you are rudely interrupted from what you're doing (such as, selecting from a menu, typing a document, etc) only to be forced to watch a status bar fill up.. and then all key presses at that point become error beeps.
8. Logic's sample memory easily becomes messed up and crazy. Quite often when using AU instruments such as BFD, Culture, and even Synthogy's Ivory. I will switch to that particular track to play on my keyboard, and each sample will be full of horrible pops and clicks-- the kind that destroy speakers. Other times, in a sample of a string for instance, all of a sudden after one second will be a pop and then the sample will be playing at a completely different pitch... I have to remove the AU instrument and reload it at this point.. This happens quite often. Logic should offer a 'buffer reset' so that you can just flash plugins but they reload whatever preset they were set to.
9. Volume faders resolution are lame! There is no reason why you shouldnt be able to access +1.0, +1.1, +1.2, +1.3, +1.4, +1.5, +1.6, +1.7, +1.8, +1.9... Further the display is only so wide and you can't even read the decimal values for numbers -10 and lower. They just appear as 10.
10. When a movie is open, and you are viewing the video output via FIREWIRE, there is a mini-floating window which contains the smpte, position, and movie start information-- However you cannot modify any of these values. You have to switch video output back to "WINDOW" to change the start position of the movie. This is obviously a bug.
11. Changing the movie's start time is very user unfriendly. There should be a simple way to specify to start at a moment of time relative to SMPTE-- So you can just say "+9:15" for example, and it would take you in 9 minutes and 15 seconds, rather than how it is now where you have to think backwards from SMPTE code and subtract.
12. You cannot view video as a window AND output to firewire. There is no reason why you shouldn't be able to do this. For example, if I wanted to output my video to a monitor in a vocal booth-- I can do this.. but I can't see what the vocalist is seeing on my own screen! This is just nonsense. You should be able to output to the screen (desktop mode or floating window) as well as an external firewire device.
13. Saving a song with a movie open should mean that when you load that song, the movie should be up and exactly as it was prior to saving. As it is now you have to select "open movie again".
14. There is still definitely a bug in track automation-- this was really bad back in version 4, but there is still something not quite right here where starting playback will not always guarantee that the automation data is being read.. And in my experiences it results in volumes being incorrect until you stop and play again, and in some cases it will not work at all unless you plot some automation points. This is an intermittent issue-- but quite often activated by placing an audio region from the audio window on a track (SEE VIDEO).
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicautomationbug.mov
15. In the arrange window, sometimes when zoomed in tightly, all parts on a track are selected, and you think that only the part that you are looking at is selected.. you move this part, and now all of your parts are off. Logic should have some kind of visual aid to let you know when ever you are moving multiple selections... Something like, the parts you are moving will highlight a dfferent color or something... This is a similar problem I have with the loop area of the screen.. You can accidentally turn it on when in the matrix window, and have no idea unless you look down at the transport, but with me for example, my transport is at the very bottom of the screen and I am not looking there most of the time.
16. Automation data, when two points are semi-close to each other, suddenly the value of the data is no longer shown.. I can understand that when you are zoomed out, and there is simply no space for this to visually appear, that's appropriate. But as it is now, it doesn't display this information when there is plenty of space for it to be visible.
17. Logic should let you set audio track inputs to the various outputs (1-2, 3-4, etc) and buses.
18. clicking on a track selects ALL parts. This is so so so annoying. How many times have I been editing voice over, and selecting a track, thinking I am shrinking the length of a part, and to find that ALL parts have been shrunk.. SO ANNOYING!!!! This needs to not happen, and there should be a simple way to right-click a track and it will have an option "select all regions"... also, when you click on a track and all parts are selected, if you horizontally zoom, logic zooms into the beginning of the track, rather than the song locator. I don't know what the LOGIC behind this is, but it's not very helpful, it actually is very frustrating.. Zooming should always move towards the song locator position.
19. EXS 24 should have a "reverse/backwards" button so that samples played are backwards.
20. Logic should offer a way to globally increase or decrease a specific automation type (especially volume) globally for all tracks... So if you have detailed crescendos that start at -3.8 and end at +1.6, you can add 3db to this and it will now be at 0.8 and end at 4.6.
21. If you have multiple tracks of the same track (such as three Audio track #1's)-- say you are recording guitar parts, and just copying the track and muting the previous track as a method of maintaining multiple takes for later auditioning. If you draw automation volume data on this track (it appears on all 3 tracks), and then if you delete the audio from one of the muted tracks and tell logic to KEEP it, suddenly all automation data is gone. GRR!!!
22. Several times I have opened Kontakt, and attempted to load an instrument while outputting a movie via firewire video to my monitor. As soon as I try to load the instrument, the firewire video output on my monitor goes crazy, and then comes back on.. Logic then crashes. This has happened 3 times randomly...
23. UNDO does not work on every function. for example, if you change an output to bus 1 instead of 1-2, you cannot undo this. Undo should undo whatever the last command was, no matter what it was. This is what the word LOGICal is supposed to represent.
24. Floating windows (as in plugin windows) should close with apple-w!!!
25. *BUG* If you are in a part that is say 10 measures long, zoom in horizontally 100% in the matrix window-- You then isolate one specific quarter note pitch in the middle of this measure, and have cycle turned on, looping over this one quarter note, if you are not looking at this note event/loop region when you hit play, the display will jump to the beginning of the part and never show you this note event as it loops. However if you have the note event on screen when you hit play, then it will behave properly. This makes it extremely difficult and frustrating to perform detailed hyper-draw work. (SEE VIDEO)
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicloopbug.mov
26. *BUG* Host Automation is not accurate. I assigned Kontakt's tune knob to C#000, and If I place a dip, the knob begins to move way before the automation data is even present.... So basically what I was trying to do, can't even be accomplished because Logic screws everything up by pitching the instrument too early... Such a shame.. By the way, I previously mentioned the importance of being able to display part data in the arrange window as matrix data (horizontal lines) rather than score data. Someone argued what good this would do-- Well this is a perfect example, if I am attempting to affect a particular section of a note with automation, I can't possible visually see where this is because the length is not described by the current score representation. Having a horizontal representation would solve this problem... (SEE VIDEO)
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicctrlchngbug.mov
27. There should be a way to convert stereo samples to mono in the sample editor.
28. When you view "as text" in the environmentt, you cannot drag an object to the arrange window-- Such as to create a bus track.. Now mind you I don't know why you can't just select "BUS" when editing a track in the arrange window in the first place, however there is no reason why 'view as text' should behave differently than when it's viewed as icons.
29. When you drag a bus from the environment to the arrange window, it replaces whatever track was there. It should ADD a track instead of replace-- atleast there should be a preference for how this behaves.
30. Occasionally when dragging a bus from the environment, there is some visual garbage in the track automation (see screenshot).
31. There should be a way to LOAD and SAVE selections in the arrange window. Quite often when editing audio from a countless number of parts/regions, it becomes painful when you have to select and move 100s of audio files. There should be a way that you can just select a ton of regions and save that selection, and reload it at anytime. There are a few 'select' tools/options under the edit window, however they are song specific-- not track specific. So they are completely usesless for what I need.
32. Logic should offer a feature to collect sysex data from midi devices so that patch names show up and can be selected via program change.
33. When no track or part is selected, and you vertically zoom in, Logic should zoom into the center most track.. It behaves very oddly and zooms in more towards the top. This becomes extremely annoying when dealing with a sequence involving 100 tracks, and a part is selected but you scroll far below where the part is.. When you begin to zoom in, it takes you towards the selected part, yet it's not displayed on the screen and you have no reference for what you are even looking at. The rule should be this: If the part is on the screen, zooming vertically will bring you to it. If it's off the screen, you will zoom into the center track of whatever is currently on the screen.
34. I mentioned this in a thread earlier... http://discussions.apple.com/thread.jspa?threadID=752485&tstart=0
There is a bug when using the transform tool involving the 'position' variable. In my example, I was attempting to reverse the time placement of three chords, that occured in a part somewhere in the middle of my song. By selecting the measure start and end of this part, Logic was unable to select or operate with the transform tool (and I tried a variety of transform options). If I moved this part to the beginning of the song, then the transform tool would suddenly work. After some research, I found online someone had said "Position Time position of the event, referenced to the start of the MIDI Region (not of the song)."--- But if I still doubt this is true, because I then placed the part on a new track with no other data, and placed it in the middle of the sequence and in the transform tool under position I selected '1 1 1 1' to '5 5 5 5' as well i tried setting the position to 'all', and none of this worked. This obviously is a bug... If it's not then it's a very serious design flaw. The position should relate to measure numbers of a song, and nothing else.
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/video/transform.mov
That is all for now...
For those who firmly agree with me and all of the points that I have brought up now and in the past, I encourage you to contact Peggie Louie, (the Logic HR department contact) at (408) 996-1010 and suggest that she hire me as a consultant to help eliminate Logic's many annoyances. I have tried to pursue this heavily in the past, but sadly I was completely ignored by her on all levels. Maybe you all can help make a difference?
Fighting the good fight,
Patrick J. Collins
http://collinatorstudios.com11. Changing the movie's start time is very user
unfriendly. There should be a simple way to specify
to start at a moment of time relative to SMPTE-- So
you can just say "+9:15" for example, and it would
take you in 9 minutes and 15 seconds, rather than how
it is now where you have to think backwards from
SMPTE code and subtract.
For this one I'd suggest getting SMPTE calculator. Entering timecode numbers and having to add and subtract is not so difficult, and AFAIC part of a composer's gig. But what I would add, instead, is that it would be fantastic if Logic provided a timecode calculator (edit: even if it was in the form of a custom Logic widget).
13. Saving a song with a movie open should mean that
when you load that song, the movie should be up and
exactly as it was prior to saving. As it is now you
have to select "open movie again".
This doesn't always happen. I've struggled with this for a long time, and I don't know why sometimes the movie will load and not other times. I would also add here that Logic should show the file pathname to the movie. Somewhere...
18. clicking on a track selects ALL parts. This is
so so so annoying.
You can prevent this from happening if you have cycle turned on and set to a set of locators that "contain" the parts you might want to select en masse. I always work with cycle=on so this is not a problem.
21. If you have multiple tracks of the same track
(such as three Audio track #1's)-- say you are
recording guitar parts, and just copying the track
and muting the previous track as a method of
maintaining multiple takes for later auditioning. If
you draw automation volume data on this track (it
appears on all 3 tracks), and then if you delete the
audio from one of the muted tracks and tell logic to
KEEP it, suddenly all automation data is gone.
GRR!!!
Never had that happen. In my experience, telling Logic to keep the data always works.
23. UNDO does not work on every function. for
example, if you change an output to bus 1 instead of
1-2, you cannot undo this. Undo should undo whatever
the last command was, no matter what it was. This is
what the word LOGICal is supposed to represent.
Undo in Logic is highly problematic for other reasons. Here, I think there should be a specific Environment Undo, just like there's a separate undo for audio edits.
29. When you drag a bus from the environment to the
arrange window, it replaces whatever track was there.
It should ADD a track instead of replace-- atleast
there should be a preference for how this behaves.
Right. This is a matter of personal preference. But still there are other ways to get an object assigned to a track. The "thru tool", for instance. No dragging required.
32. Logic should offer a feature to collect sysex
data from midi devices so that patch names show up
and can be selected via program change.
My guess: considering how much sheer time it takes to write this kind of software, let alone debug it with every conceivable device, it's not likely this is going to happen.
That is all for now...
For those who firmly agree with me and all of the
points that I have brought up now and in the past, I
encourage you to contact Peggie Louie, (the Logic HR
department contact) at (408) 996-1010 and suggest
that she hire me as a consultant to help eliminate
Logic's many annoyances. I have tried to pursue this
heavily in the past, but sadly I was completely
ignored by her on all levels. Maybe you all can help
make a difference?
Wait in line buddy!
(LOL)
I must say, I'm very impressed with your list and attention to detail. And I feel your pain, trust me. But many of the things you've listed are feature requests and not bugs. And some of the behaviors you've described I have yet to run across. So this is typical with Logic, that it can be operated in so many diverse ways that no two people run it in the same way, nor would two people conceive the program's capabilities in the same way. But I digress...
I also think there's a certain amount of Logic convention that I don't think you've adopted yet, hence your wish for behaviors that don't yet exist.
I don't disagree with most of your feature requests, and I'm (quite unfortunately) able to say that I'm familiar with most of these bugs and about 9 dozen more. But again, it's important to distinguish between bug, feature request, time to RTFM, and errant behavior that's experienced by a very limited number of users.
There's no doubt that this program has its problems. In particular, your #1 re the playback buffer. And I'm glad you've brought many of the bugs into the light for people to read. Good work. -
The problems with Logic (as I see them)
Hello Everyone,
Please keep in mind that I am writing this with the intention of expressing my frustrations, and what I feel would make Logic a better program. I realize not everyone will agree with the importance of what I say, but I am a firm believer of HAVING THE OPTIONS. Let the users choose what works for them and how they can best accomplish the tasks that they need to with their individual workflow.
That being said, here is my list of Logic's faults and why I often call Logic "Illogic".
General:
* Logic should have a feature to automatically save your song every X number of minutes. Final Cut Pro does this, why doesn't Logic? It should prompt you "Logic can automatically save your project if you save it" (assuming the current file is 'autoload') to remind users that they should create a project name and save their work.
* There should be a preference option for all windows to open as 'float'. Once upon a time holding option while double clicking parts would open them as a float (though having to hold down option every time in my opinion is an inconvenience, because I personally ALWAYS want my windows open as a float), however.. now in 7.2 that does not seem to work anymore. So, theoretically after you set your prefence to 'always float', then the when you hold option or control and click on a particular window, it will bring that window to the foreground...
* The loop region at the top of the screen is larger than the time-line ruler tab. This is the #1 annoying thing about logic. so many times, I click on an area of the ruler tab to start playing at a specific section.. and somehow I ACCIDENTALLY click on the loop area... If I could ask for ANYTHING it would be that there is an option to disable LOOPING turning on and off from clicking up there. My 2nd request would be that the ruler tab be re-sizeable so that it can be larger than the loop area. This is especially the case for the matrix window where it default opens up to a sizing where the actual time line is so tiny, and the loop region is HUGE.... Every time I open a matrix window I have to resize this and again the loop area is 2x as big as the timeline area, so I end up wasting screen space just to avoid the annoying loop feature being trued on. My suggestion is, require that the loop button on the transport be the only way to turn on the loop feature (other than key commands), and only when it's turned on can loop points to be set. Why is the loop area so big anyway?!?!
* Logic should offer a TALK BACK MIC button which will utilize the built-in apple microphone or iSight microphone and allow that to be sent to the audio interface. This would be an extremely useful feature for studio recording setups.
* Starting logic takes approximately 5 minutes for me. It says "scanning exs24 instruments" for the majority of the time, and I admit my sample library is huge. however, my sample library has not changed in over a year. Why does logic have to continuously scan it??? Can it not make a reference of how many files, compare and if its larger-- then scan???
Song Loading:
* When audio files are not found during loading a song, it asks you the first time what you want to do "search", "manual", and "skip"... if you click "skip", and then it finds another missing file, it no longer presents you with the "SKIP" option.. but forces you to either search or skip all.. Let's say you have a project that used 5 audio files that are all missing because you had them on a different hard drive, but have copied the data somewhere else. The first two files it asks for you don't need.. but you know where the 3rd file is.. So your plan is to skip the first two files and then click manually for the 3rd.. but oh.. YOU CAN'T DO THAT! You have to find your first 2 files if you want to even have the option to locate your 3rd file... Unless you are planning to locate the files within the audio window-- but still, Logic should not be so unfriendly.
Further, If you choose "manual", and what you're looking for isn't where you thought it was-- You realize you actually want to search for it.. So you click cancel and guess what.. It assumes you want to skip it, and so you either have to reload your project again, or deal with this in the audio window. Bottom line is this window should always have "Search", "Manual", "Skip", and "Skip All".
* When you open another project, Logic DUMPS all of the audio instrument data in memory. This is one of the worst things about logic. If you are working between multiple files-- such as when scoring a film, and you are using different files for different cues, then this becomes a complete nightmare and a waste of your time. Logic should be assessing "What instruments are in common between these two projects"... And utilizing all audio instruments to the best of the machine's memory capacity. There is no reason for Logic to behave like this.. I've had to revert back to previous versions of the same song because some data was different, and I am just trying to visually compare various settings one from the other.. Just clicking from one project's window to the other requires me to have to wait 3-4 minutes while Logic loads all these audio instruments (WHICH ARE IDENTICAL IN BOTH PROJECTS BY THE WAY!!!).. This is just incredibly dumb, and creatively stifling.
* BUG * -- Mind you, if you have two projects open, and you close one.. Logic begins loading all the audio instruments of the remaining project.. If you close that project as it's loading audio instruments, Logic will crash.
Matrix Stuff:
* BUG * If you have a part with lots of notes, and you begin to make a selection and scroll horizontally through all the content until then entire part is covered in the selection... After you release the mouse button and make this selection, quite often many random notes are unselected. This can be demonstrated by watching the following quicktime move:
http://www.collinatorstudios.com/video/logicbug.mov
* When you select a single note in the matrix window, it sounds.. This is a GREAT feature... However, when you make a selection of multiple of notes, they all sound at the same time.. This is just plain dumb. It once blew up my speakers... There is NO reason why a multiple selection would need to sound.. It's just dumb.. bad for your speakers, bad for your ears. The rule should be, if selection box = yes, then sound = no... else, sound = yes.
* When viewing the matrix window while recording, all note events disappear until after recording stops. This is highly annoying (and illogical) as it causes confusion if you are relying on watching the note events in that part to know where you are supposed to come in.
* The grid cannot be set to divisions other than 2 or 3. Musicians use 5 and 7!!! And also, can logic please offer an option to display the grid as NOTE symbols... It is much more musician friendly to see a 16th note with a 3 over it than "24". 24 means nothing to me as a musician.
* Quantizing should allow custom input for tuplets.. So that users can quantize odd figures such as 13:4 for example.
* If you move the song locator to a specific time location in the arrange window, and then double click a part to open it in the matrix window, the window is not opened to the locator's position. Thus causing annoyance and confusion as far as what the user is even looking at.
* During horizontal scrolling of the window, the locator temporarily disappears, making it difficult to find where the locator is-- which usually is a marker for us to know what we are trying to find-- ESPECIALLY WHEN YOU OPEN A WINDOW AND IT'S NOT EVEN DISPLAYING THE SONG LOCATOR'S POSITION!!!
* If you have two parts on the same arrange track, adjacent to each other and you enter the matrix window of the first part.. (assuming the link/chain icon is lit) When you scroll to the end of the note data, logic automatically takes you to the next part... The problem with this as it is, is that it does not take you to the FIRST note event of the text part, but rather continues to align the song locater with where ever it previously was (so you end up viewing somewhere further down in the next part).. To clarify, say you have a part what begins at MM-7 and ends at MM-14, the 2nd part begins at MM-15 and ends at MM-22.. If you begin scrolling the song locator past measure 15, then suddenly you see measure 22. When you really should be seeing measure 15. This is confusing and weird.
* Every time you enter the matrix window of a part, the chain/link button is on. For me, this is incredibly annoying. There should be a way to set this so that the button's default is OFF...
* When you move the mouse around the matrix window, whatever pitch corresponds to the vertical location of the mouse--- that particular key of the piano keyboard on the left side of the window should highlight so you could clearly see what note you are hovering over.. Logic tries to help with this by offering things like contrast options for C D E, but this clearly would be much more helpful.
* With the velocity tool you can (MOST OFTEN ON ACCIDENT) double click on empty space in the window and cause all note events in all parts to appear on the screen-- Yet once you do this, you can't double click on a particular part's note to only display that part again. You have to switch to the arrow tool to do this. This is inconsistent and ILLOGICAL...
ON A SIDE NOTE: PLEASE ENABLE A FUNCTION TO DISABLE THIS "ALL NOTES OF ALL PARTS APPEAR" when double clicking on empty space feature! I want NOTHING to happen when I double click within the matrix window... Make it a button within the window or just an option in the drop down menu only. * BY THE WAY * When you DO double click the background of the matrix window and multiple parts appear.. If you move notes of one part to match it up with other, it is incredibly slow. there is a 1-2 second pause each time you move a note move.. My g5 fan goes on each time I do this.. I'm sorry, there shouldn't be anything too CPU intensive to accomplish this simple task!!! I am only viewing 2 parts at the same time and it's slowing down my cpu...
* Occasionally when I adjust note lengths, I accidentally double click on an actual note.. This opens the event list editor, and there is an intermittent bug where this note sounds-- and for some reason when the event list opens, the note sounds on top of itself a million times, so the result is a super loud flanged note which again, almost blows up my speakers and hurts my ears... PERSONALLY, I would like an option that DISABLES the note event list from opening by double clicking. Preferences currently has "double clicking a midi region opens: <selectable>"--- why not also have "double clicking a NOTE in matrix window does: <selectable>"-- and please allow "DO NOTHING" to be one of the options.
* Why does the finger tool only change the end position of the note event??? Should this not be replaced with the bracket tool which appears automatically when using the arrow tool on closely zoomed in notes? This finger tool seems like an outdated old logic feature which has been replaced and improved upon. What would be nice is to have this bracket tool where we can be assured we are altering note start and end positions without moving things.
* In the hyper-draw >> note velocity section--- This is highly annoying to work with... It's far from user friendly. first of all, to move a note's velocity position, you have to click on the "ball".. if you click on the line, it does nothing.. Because the ball is so small to begin with, quite often the user is going to miss the ball and somehow begin to "START LINE"-- Which is weird because it's activated by holding the mouse button down briefly. There really should be a "line tool" for this, because "START LINE" is too easily accidentally activated-- this is frustrating for the user. Most important though, these 'velocity markings' should be adjustable by clicking on the line as well-- not just the ball.. there should be a 2-3% area around each ball/line which logic will recognize as part of the ball/line so that it can easily be moved. I also feel that there should be some specific features for this section, such as a way to select multiple note velocities and apply a random pattern to them, or apply a logarithmic curve to the line tool. Yes, you can accomplish this stuff somewhat with the transform tool-- but this way would be more user friendly, and allow a lot more creative flow.
Event list/Tempo list:
* When one event is selected, by moving down X number, holding shift+clicking SHOULD select all events between those two points. However, the shift key for some reason acts as the OPTION key does in the finder-- (meaning it will only add one additional selection at a time).. This is highly inconsistent with the actual behavior of a Mac... Open a finder window and hold shift and click on items that are not vertically next to each other and a group is selected... Now do it in logic, and it causes GREAT frustration and annoyance. What happens if you have a million note events that you want to erase? You have to go page by page and click with shift on each one?? Or drag a selection and wait for logic to scroll you to where you want to go?????????? No thanks.
Arrange stuff:
* "REGIONAL CONTENT" (meaning the visual representation of note events) does not accurately depict the event data as note lengths cannot be visually identified. Everything shows up as a generic quarter note... My #1 suggestion is that regional content should be customizable so that you can view it in a miniature matrix data style. The biggest problem for me is that I cannot see where my notes end-- I can only see where they start, this makes it very difficult to identify what I am looking at.
* Track automation data should only be inputable by the pencil tool. I cannot mention how many times automation data has accidentally altered when using the arrow tool. The pencil tool should allow you to raise and lower the lines reflecting automation data... What is the point using the pencil tool for automation if it's only function is to create "points" yet you can also create points with the arrow tool..??? Pencil tool should act as the arrow tool does in the sense that it raises or lowers automation data.
* Recording preferences do not offer the option to automatically merge new part with existing part when a region is NOT selected. How annoying is it to have to select a part every time you want to record something just so it will be included in that original part!
* Ruler at the top of the screen should also give an option for tuplets. 5, 7, etc.
* When in record mode, if you click on the ruler to another time position, all audio instruments cut out and it takes approximately 3-4 seconds before tracks begin playing audio. This becomes very annoying if you are trying to do a pick up and want to just start 1 measure before hand.
* There should be a way to EASILY (without having to cable two tracks together in the environment) temporarily link multiple tracks together so that automation data will be duplicated. So theoretically you can link 3-4 tracks together, and by adding automation data to one, you are adding it to all 4.
* If a part is soloed, and you hit record. The part stops being soloed and you can no longer hear it. This makes it impossible to record a pick up on a soloed track unless it's locked, but it shouldn't need to be locked.
* When you are zoomed in tightly, and you are trying to align notes within two parts on different tracks (meaning using the PSEUDO NOTATION DATA that appears in the part to align), there needs to be a VERTICAL line that snaps to the note closest to the mouse cursor. When trying to do this in parts that are a far vertical distance apart, it becomes VERY difficult to eye this alignment. Logic does this with automation data.. but for some reason they left it out for actual part alignment...
* There should be a way to force the downbeat of a measure to occur at any given moment... What I mean by this, is composing for film is an absolute PAIN in Logic. Scenes, last for odd amounts of time, and Logic's reference manual claims that you can solve this by using various tempo tricks, however it is ineffective for the most part. What Logic needs is the ability where you can click on a drop down menu item within the arrange window and FORCE that where ever the song locator is, the rest of the measure is eliminated and a new measure downbeat occurs right there. This will allow you to always have new scenes on the downbeat of a measure without having to mess with your tempo and meter.
Hyper Edit Window:
* I can't even begin to comment on this... The hyper edit window is one of the worst things I have ever seen in a music/audio program. It is a horrible interface, you can't get it to do anything correctly without messing everything up. This thing needs a complete overhaul... I mean, just try to create a simple crescendo with note velocity and it will take you all night.. Try to add pitch bend data, and it adds note velocity data as well.. It's a total nightmare, and I would love to hear someone's practical application of this window.
Score Window:
* The method that the song position locator moves along with the notation is very strange. It is not at all how a person's eyes function when reading music. A much more logical approach to this would be for a transparent colored block of some type to highlight an entire measure, and each note head will glow as it sounds. The current way is so strange, it speeds up and slows down-- makes absolutely no sense, and it is more disruptive than anything.
* When the Hyper Draw > note velocity area is exposed, if you use the velocity tool to increase/decrease a particular note's volume, the data in the hyper draw window does not update in real-time as you use the velocity tool. This behavior is inconsistent with the matrix > hyper draw's note velocity section-- where as in that area, the velocity ball/lines do update in realtime.
EXS24:
* when you are in many levels of subdirectories and you are auditioning instruments, it becomes very time consuming and annoying to have to continually trace through all the subdirectory paths. There should be a feature directly under the load instrument window that takes you to the subdirectory of the current instrument.
* Seems when SONG SETTING > MIDI > "chase" is turned on... When starting sequences using audio instruments, (I am using a harp sample within the exs24), there is a latency hiccup upon starting, which is very disruptive when trying to listen to a short isolated moment in a composition. And I do want to chase note events in general-- but this present situation makes it difficult for me to work. I would suggest that you can specify tracks to exclude chasing.. Or fix the latency hiccup issue.
Thank you.
-Patrick
http://collinatorstudios.comthis is excellent patrick. can you number your points so that the thread can be discussed?
1. yes
2. ok
3. great idea
4. even better idea. you could set something up with aggreagate device i suppose but it would be better to have the feature to hand.
5. you need to look into your project manager prefs. scan the paths and the links to the audio files will be saved meaning they will load up in a fraction of the time.
6. yes this is nuts. you can skip all and sort it out with PM but then you shouldn't have to.
7. this exists already. perhaps it ought to be a default but you need to set your esx prefs to 'keep common samples in memeory when switching songs'. then it will do just as you wish it to. you can also use the au lab in the devlopers kit which will allow you to load in au units etc seperately from logic, which logic can then access. this is a good way of getting around the 4 GB memory limit with logic too.
8. ok, don't know about this bug.
9. yep happens here too.
10. doesn't worry me this one. you can turn off midi out.
11. yes this is silly.
12. well, i think this is something we can get used to. i am a musician and i am used to seeing '24'.
13. you can already set up groove templates to allow for quantizing irrational tuplets. i do it all the time. i would like to see step input for irrational tuplets though.
14. yes this is silly. the button for the KC 'content catch' is getting very worn out.
15. ok.
16. not sure i understand this one.
17. yes this drives me nuts too. i have to lock screensets to get this to stay off.
18. you can use KCs for 'go into/out of sequence' - but yeah.
19. ok
20. there are a couple of features that use old technology that cause hangs and poor performance. score is a good example of that. maybe the matrix is too. the score is being updated we assume with newer technology maybe the matrix will too.
21. there are probably better ways of adjusting velocity than using matrix or hperdraw velocity. have you tried holding control-option and click dragging a note in score?
22. as i pointed out in 20, this is an old feature. you could change things to be consistent with modern macs and annoy long term users such as myself, or leave them and let them be inconsistent to confuse newbies. i think depending on what it is we oldies could upgrade our work habits.
23. this one doesn't worry me so much.
24. good point (no pun intended).
25. well, i find the opposite - that merging new parts to objects i have accidentally selected to be annoying. perhaps more detailed prefs?
26. yep.
27. this will be down to your audio settings. you can improve this lag but it will be dependant on the capabilities of your system.
28. i don't know why this feature doesn't work in logic. it is supposed to have ti already and i just don't understand why it doesn't. maybe it will be fixed in the next upgrade.
29. agreed.
30. ok - i have other work flows for this but it would be nice.
31. i don't agree that logic is a pain to score with to film, i do it nearly everyday. but you are discribing an interesting feature which might be worth discussing more. i think you might find yourself getting alarming and unmiscal results doing this that will end up having to be sorted out the conventional way. but its a good idea.
32. oh yes.
33. yeah - this could be improved.
34. ok, well i wouldn't go about it this way, but yeah there is generally sticky spots with regards to updating of information al around logic.
25. very very good idea.
26. there are lots of problems with the chase function. very annoying. i certainly agree with this.
in general, some of these could well be done as their own threads. some of the missing functionality may exist. if you can confirm a bug then you are on stronger ground when you submit feedback. but this list is full of fantastic ideas. -
Revision: 10459
Author: [email protected]
Date: 2009-09-21 08:42:44 -0700 (Mon, 21 Sep 2009)
Log Message:
Change to ensure ScriptNodes are no longer part of the node tree after interface compilation stage in order to avoid the extra code that was necessary to avoid tripping over them during type checking, etc.
Improving revision 10199 a bit, to allow for single line comments.
QE notes: None
Doc notes: None
Bugs: SDK-22027
Reviewer: Paul
Tests run: Checking, Compiler cyclones
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-22027
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/AbstractSyntaxTreeUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/AbstractBuilder.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/DocumentBuilder.javaIn general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt -
Where can i find the upgrade from logic pro 7.1.1 to 7.2?
Hello there.
Is the upgrade from logic pro 7.1.1 to 7.2 still available out there somewhere? I know I'm a bit behind the rest of the world but financially I'm taking the 'do the best with what you can' route!
Never used logic before, moving up from garageband and cubase sx cos everyone says it's a better program.
Many thanks,
GDxHi
If I remember correctly, the 7.2 update was a "Paid for" update, with a new dvd.... so you are most likely out of luck.
The good news is that Logic Pro is pretty cheap on the Appstore
CCT -
Standalone report server not found on the network between logical partitions on AIX
Hello,
Here s our architecture:
forms/reports11gr2(patchset 1)
weblogic 10.3.6
on IBM AIX 7.1
Server JRE
Java(TM) SE Runtime Environment (build pap6460sr13ifix-20130303_02(SR13+IV37419) )
IBM J9 VM (build 2.4, JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr13-20130114_1
JRE -client - 1.6.0_27
We have 2 logical partitions separated in 2 different physical m/c where cluster of forms /reports is installed.
if i have a report service repsrv11g on one logical partition say, box 100 on Physical box 6000, the other logical partition box101's forms server on physical box 7000 is not able to look up the report service when calling from Forms using the Run_report_object.
Gives, FRM -41213 error.
If i just run the URL(use 2nd box) with http://101:8888/reports/rwservlet/showjobs?server=repsrv11g, it gives REP-51002: Bind to Reports Server repsrv11g failed
We thought/read that as long as they re on the same network / domain, report service is available.
Also did rwdiag.sh on one partition, its not able to find the other one.
Ran the test form which Oracle provides and it s also not able to find the report server on the network when run on the other lpar.
Temporarily, we created another report service on the other lpar but still using loadbalancing dns while doing web.show_document, so, it could potentially fail to bring up a report if load balancer redirects from one form's server to report server on the other partition.
Any thoughts would be greatly appreciated.
Thanks.Hello,
Any inputs on this pls? -
As much as the space in HD is necessary to be able to make a Client Copy??
Hi everybody!!
As much as the space in HD is necessary to be able to make a Client Copy??
After the installation, the still servant with approximately 11 GB of free space in C (Total 30 GB) and around 100 free GB in E (Total 190 GB) , in E installed SAP himself ECC6 along with the data base ( Oracle 10,0,2 ), when all tag aiming at the record E did installation itself, but in a minute to make the Client Copy he remains without space in the Drive C (38,3 MB Free)
The Client Copy is for the "Client 300 Test", the Client Copy in DEV with 3 Client ( 100 DEV, 120 QA DEV, 130 Sandbox ) it could come true trouble-free
thanks
Edited by: Manuel Sandoval on Aug 18, 2008 7:16 PM
Edited by: Manuel Sandoval on Aug 18, 2008 7:20 PMWhere do the "Client Copy" goes down the process in reviewing the "TCode ST22" I find the following:
Runtime Errors DBIF_SETG_SQL_ERROR
Date and Time 19.08.2008 06:21:19
Short text
SQL error occurred when accessing table.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
How to correct the error
Database error text........: "ORA-03106: fatal two-task communication protocol
error"
Internal call code.........: "[SETG/GET /INDX_HIER ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_SETG_SQL_ERROR" " "
"SAPLSHI2" or "LSHI2U25"
"STREE_READ_BUFFERED_DATA_GENER"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "mts-qua"
Network address...... "192.168.1.48"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 80686"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "MTS-QUA"
Database type..... "ORACLE"
Database name..... "ECQ"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "May 22 2007 00:14:27"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 111
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 8176
EM...... 2090448
Heap.... 0
Page.... 16384
MM Used. 1943008
MM Free. 145920
User and Transaction
Client.............. 300
User................ "SAP*"
Language key........ "E"
Transaction......... " "
Program............. "SAPLSHI2"
Screen.............. "SAPLSMTR_NAVIGATION 0100"
Screen line......... 2
Information on where terminated
Termination occurred in the ABAP program "SAPLSHI2" - in
"STREE_READ_BUFFERED_DATA_GENER".
The main program was "SAPLSMTR_NAVIGATION ".
In the source code you have the termination point in line 57
of the (Include) program "LSHI2U25".
Source Code Extract
Line SourceCde
27 DO_NOT_READ_DEVCLASS = 'X'
28 IMPORTING
29 * MESSAGE =
30 STRUCTURE_HEADER = STRUCTURE_HEADER
31 EXCEPTIONS
32 OTHERS = 0.
33 *
34 READ TABLE BUFFER_DATA WITH KEY TREE_ID = STRUCTURE_ID.
35 MODIFY_INDEX = SY-TABIX.
36 *
37 IF NOT STRUCTURE_HEADER-BUFFERVAR CS BUF_NODE.
38 GET_NODES = FALSE.
39 BUFFER_DATA-NODES_OK = FALSE.
40 ENDIF.
41 IF NOT STRUCTURE_HEADER-BUFFERVAR CS BUF_REF.
42 GET_REFERENCES = FALSE.
43 BUFFER_DATA-REFS_OK = FALSE.
44 ENDIF.
45 IF NOT STRUCTURE_HEADER-BUFFERVAR CS BUF_TEXT.
46 GET_TEXTS_LANGUAGE = SPACE.
47 BUFFER_DATA-TEXT_OK = FALSE.
48 ENDIF.
49 *
50 * get nodes and/or references
51 IF GET_NODES EQ TRUE OR GET_REFERENCES EQ TRUE.
52 SELECT SINGLE * FROM TTREELOADS WHERE TREE_ID EQ STRUCTURE_ID.
53 IF SY-SUBRC EQ 0.
54 CLEAR BUFFER_NODES. REFRESH BUFFER_NODES.
55 CLEAR BUFFER_REFS. REFRESH BUFFER_REFS.
56 IF GET_NODES EQ TRUE AND GET_REFERENCES EQ TRUE.
>>>>> IMPORT BUFFER_NODES BUFFER_REFS FROM DATABASE INDX_HIER(XX)
58 ID STRUCTURE_ID.
59 BUFFER_DATA-NODES_READ = TRUE.
60 BUFFER_DATA-REFS_READ = TRUE.
61 ELSE.
62 IF GET_NODES EQ TRUE.
63 IMPORT BUFFER_NODES FROM DATABASE INDX_HIER(XX)
64 ID STRUCTURE_ID.
65 BUFFER_DATA-NODES_READ = TRUE.
66 ELSEIF GET_REFERENCES EQ TRUE.
67 IMPORT BUFFER_REFS FROM DATABASE INDX_HIER(XX)
68 ID STRUCTURE_ID.
69 BUFFER_DATA-REFS_READ = TRUE.
70 ENDIF.
71 ENDIF.
72 * nodes[] = buffer_nodes[].
73 * references[] = buffer_refs[].
74 APPEND LINES OF BUFFER_NODES TO NODES.
75 APPEND LINES OF BUFFER_REFS TO REFERENCES.
76 ELSE.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 2
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE SAP Easy Access
SY-MSGTY E
SY-MSGID 01
SY-MSGNO 289
SY-MSGV1 SAP*
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20080819
SY-UZEIT 062116
SY-XPROG
SY-XFORM
Active Calls/Events
No. Ty. Program Include Line
Name
10 FUNCTION SAPLSHI2 LSHI2U25 57
STREE_READ_BUFFERED_DATA_GENER
9 FUNCTION SAPLSHI2 LSHI2U14 82
STREE_READ_TOP_LINE_GENER
8 FUNCTION SAPLSHI1 LSHI1U12 73
STREE_STRUCTURE_READ_TOP_NODE
7 FUNCTION SAPLSHI1 LSHI1U14 47
STREE_STRUCTURE_READ_N_TOP_LEV
6 FUNCTION SAPLSHI6 LSHI6U08 38
STREE_HIERARCHY_READ
5 FUNCTION SAPLSMNU_NEW LSMNU_NEWU02 130
MENU_GET_MENU_TREE_PART
4 FUNCTION SAPLSMTR_NAVIGATION_MODULES LSMTR_NAVIGATION_MODULESU01 140
NAVIGATION_LOAD_MENU_DATA
3 FORM SAPLSMTR_NAVIGATION LSMTR_NAVIGATIONF11 14
HELP_FORM_LOAD_ALL
2 FORM SAPLSMTR_NAVIGATION LSMTR_NAVIGATIONF0I 511
CONTROL_INITIALIZE_TREE
1 MODULE (PBO) SAPLSMTR_NAVIGATION LSMTR_NAVIGATIONO01 10
STATUS_0100
Chosen variables
Name
Val.
No. 10 Ty. FUNCTION
Name STREE_READ_BUFFERED_DATA_GENER
GET_NODES
X
5
8
0
0
GET_REFERENCES
X
5
8
0
0
GET_TEXTS_LANGUAGE
2
0
0
0
STRUCTURE_ID
S000
53332222222222222222222222222222
30000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
NODES[]
Table IT_235[0x1102]
\FUNCTION=STREE_READ_TOP_LINE_GENER\DATA=INEXTLEVEL[]
Table reference: 44
TABH+ 0(20) = 00000000800EC451000000002C000000EB000000
TABH+ 20(20) = 000000004E040000FFFFFFFF046C0000F0080000
TABH+ 40( 8) = 08000000C1248001
store = 0x00000000
ext1 = 0x800EC451
shmId = 0 (0x00000000)
id = 44 (0x2C000000)
label = 235 (0xEB000000)
fill = 0 (0x00000000)
leng = 1102 (0x4E040000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000033
occu = 8 (0x08000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0x30F6BC51
>>>>> 2nd level extension part <<<<<
tabhBack = 0xC013B251
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
REFERENCES[]
Table IT_236[0x516]
\FUNCTION=STREE_READ_TOP_LINE_GENER\DATA=REFERENCES[]
Table reference: 45
TABH+ 0(20) = 00000000C0F6BC51000000002D000000EC000000
TABH+ 20(20) = 0000000004020000FFFFFFFF046C000020120000
TABH+ 40( 8) = 10000000C1248001
store = 0x00000000
ext1 = 0xC0F6BC51
shmId = 0 (0x00000000)
id = 45 (0x2D000000)
label = 236 (0xEC000000)
fill = 0 (0x00000000)
leng = 516 (0x04020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000082
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0x78F6BC51
>>>>> 2nd level extension part <<<<<
tabhBack = 0x0014B251
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
TEXTS[]
Table[initial]
SY-REPID
SAPLSHI2
5454544322222222222222222222222222222222
310C389200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
UP_NAME_USER_EXIT_2
USER_EXIT_2
5545545455322222222222222
5352F5894F200000000000000
0000000000000000000000000
0000000000000000000000000
REF_TABLE_NAME
2222222222222222
0000000000000000
0000000000000000
0000000000000000
I_TNODET[]
Table[initial]
TTREELOADS
S000 20060927073108G
53332222222222222222222222222222333333333333334
30000000000000000000000000000000200609270731087
00000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000
NODE_TYPE_STEXT_F_MODULE
STREE_NODE_TYPE_GET_STEXT_XXXX
555445444455554544555545555555
34255FEF45F4905F754F34584F8888
000000000000000000000000000000
000000000000000000000000000000
SY-SUBRC
0
0000
0000
BUFFER_NODES
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
BUFFER_NODES[]
Table[initial]
BUFFER_REFS
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
BUFFER_REFS[]
Table[initial]
TRUE
X
5
8
0
0
SYST-REPID
SAPLSHI2
5454544322222222222222222222222222222222
310C389200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
INDX_HIER
XXS000 ############################################################
5553332222222222222222222222222222000000000000000000000000000000000000000000000000000000000000
8830000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
INDX_HIER-CLUSTR
0
00
00
GLOBAL_TREE_REF_TYPE_STXT
STREE_GET_STEXT_FOR_RTYPE_XXXX
555445445555455544555555455555
34255F754F34584F6F2F24905F8888
000000000000000000000000000000
000000000000000000000000000000
PROPERTY_OWN_LONGTEXT
1
3
1
0
0
NODE_TYPES_WITH_OWN_LONGTEXT[]
Table[initial]
TRTYPEH
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
No. 9 Ty. FUNCTION
Name STREE_READ_TOP_LINE_GENER
DISPLAY_MODE
D
4
4
0
0
FILTER_ID
22222222222222222222222222222222
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
STRUCTURE_ID
S000
53332222222222222222222222222222
30000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
TABLE_NAME
TMENU01
544453322222222
4D5E50100000000
000000000000000
000000000000000
MESSAGE
000
2222222222222222222223332222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PARENT_NODE
22222222222222222222222222222222
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
STRUCTURE_TOP_LINE[]
Table IT_233[0x1234]
\FUNCTION=STREE_STRUCTURE_READ_N_TOP_LEV\DATA=STRUCTURE[]
Table reference: 42
TABH+ 0(20) = 0000000030F1C151000000002A000000E9000000
TABH+ 20(20) = 00000000D2040000FFFFFFFF04640000900E0000
TABH+ 40( 8) = 08000000C1248001
store = 0x00000000
ext1 = 0x30F1C151
shmId = 0 (0x00000000)
id = 42 (0x2A000000)
label = 233 (0xE9000000)
fill = 0 (0x00000000)
leng = 1234 (0xD2040000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000063
occu = 8 (0x08000000)
access = 1 (ItAccessStandard) -
Trouble accessing legacy instruments in the Library in Logic 10
If you just installed Logic 10 It's a simple bug to work around.
First do it the hard way...
In the inspector (left column) click on the instrument for your selected Instrument track.
In the popup hover the mouse over Legacy and navigate to any instrument.
You will then see the Library restore the links to the Legacy Instruments which should be a "permanent" fix from now on.Hi Rale99,
Thanks for your reply. Maybe its not applicable to me. On dont have Logic Pro 9, I only have the new version Logic Pro X. I was guessing that the Legacy stuff came with Logic 10 as normal.. because I saw mention of it in the Preferences.
To clarify from my side, I have gone through the process of Logic 'Preferences'(Advanced Tools) then I have ticked the Advanced Editing to enable it.
I have also clicked the ‘Download additional Content’ and downloaded all possible additional content I believe (as all boxes are ticked with the Status as ‘installed’ – this includes the Legacy and Compatibility option at the bottom (it shows 10.7 gb download now installed).
But I still can’t see the Legacy presets in the Logic Pro 10 ES1 synth?
Not sure if I have missed something?
Regards
Andy -
When I open a tab the next day I still get the previous day's version??
I never get the current day's version of the tab I open the next day.
== This happened ==
Every time Firefox opened
== I began using windows 7 and current version of Firefox.A reboot of the computer shouldn't be necessary.
It sounds that Firefox didn't get closed properly and was still running if a reboot was necessary.
It is usually best to use "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit) to close Firefox if you are currently doing that by clicking the close X on the Firefox title bar. -
My facebook app went dark and had the word "waiting" below it and I can not delete so I downloaded a new facebook app which is ok but the old app is still there but now the word "waiting" is gone and still cannot delete.
This is my boilerplate respone for the "waiting apps" problem. Give these suggestions a try in order.
1. Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
3. Make sure that you do not have a stalled download in iTunes - if you have a download in there that did not finish, complete that one first.
4. If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
5. You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again. Apps may also be able to be deleted in Settings>General>Usage>Storage if you cannot get the X to pop up on the icon.
6. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
7. If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
I can't use my Presonus Firebox with my new 10.6 OS, the red button is still red
Hi there,
It's my first post with this community, and Im' french, so my english is not so good.
I have upgraded yesterday my old 10.4 OS for 10.6. I am musician, I use Logic Pro 8, and my Presonus Firebox (firewire plug) doesn't work. The red button is still red, not blue.
My computer recognizes the firebox (I have seen this in "about this mac/ + infos/firewire"), and also in Logic, pref/audio, the presonus is seen by the software. But no sound, no signal from my midi keyboard.
It's known that this kind of harware doesn't need drivers... but I don't know what to do. And I have work to do...
Thank you to everyone for giving me answers, or at least, trails.
Thank You
MyBassI auto reply. In fact, an update of the firmware was needed...
-
Are screensavers still necessary?
Is a screensaver still needed? I have a Mid 2013 13" MacBook Air. I'm curious if I need to be concerned with using a screensaver. I use one when I'm in public or around others, just to ensure privacy and all. But when I'm alone, can I just turn off my screensaver? Is there a possibility of image retention or screen burn in from not using a screensaver on modern displays?
Thanks for any direction you can provide.pmpknetr21 wrote:
Hey OGELTHORPE,
If memory serves me right, screensavers were originally created to ensure that older CRT monitors would not experience burn in or image retention when left on a particular screen for too long. Considering that, it begs the question, are they still needed for computers with modern monitors?
I have noticed a few retina MBP owners raise the issue if image retention on their displays so perhaps for them it is an issue.
Or will I damage my MBA screen if I do not use a screensaver?
Though not 'proof positive' I have not seen any such complaint for 'ordinary' led MBPs or MBAs nor have I witnessed any such issue with my equipment. One could argue that it may not be necessary, but then a nice screen saver does have some entertainment value. I can leave it for each individual to decide if they want it or not.
Ciao.
Maybe you are looking for
-
Help with only allowing someone to fill or edit a pdf form twice
I need to make a pdf form. This form I would like the customer to only be able to fill it out and save it one time. No printing. The form will be on a usb drive. I then need the same thing but be able to fill or edit the form twice and five times. Bu
-
Just starting getting phantom emails in my inbox from 1969 with no sender/no content and I cannot even delete them...wassupp?
-
Possible to show the WBS element in the down payment request?
Hi, We have a
-
Maximum number of records fetched by ABAP Query
Hi Experts, Please tell me what is the specific maximum numbers of records that can be handled by an ABAP Query. Thanks in advance. Regards, Bilal
-
Server 2008R2 and Exchange on Same server
Hello Everyone, I have taken over the IT Department for a small County Government and have found that the prior contractor installed Exchange 2010 on the same server that is running Active Directory. This machine is also acting as the DC. I would rea