Is their a 3rd party card that will speed up rendering for FCP6?
Is their a 3rd party card that will speed up rendering of DV footage on the timeline & for conversions also for FCP6? I am thinking about buying an 8 core.
steve
8 gigs, one per processor.
But you're not going to achieve any appreciable decrease in rendering times.
It's a topic that we see around here about one a week so you can search for RENDERING TIME or similar topics and see lots of threads.
If you want faster rendering times, you have to use a proprietary, hardware-based codec. This is NOT a good idea unless you are prepared to abandon the hardware when the project wraps since it will certainly and quickly become obsolete or orphaned when the mfr goes out of business.
bogiesan
Similar Messages
-
I have about 88,000 songs in my music library, some are duplicates. Does anyone know of any Apple Product or 3rd party software that will identify and remove duplicates.
Backup your music to an external source before doing this, just in case you delete the originals by accident.
iTunes will show you the duplicates. But I recommend tagging their comments or another field once selecting them to ensure you don't accidentally delete both the original and duplicate. You can always select all of them and change all their comment tags at once. Once you've done that, stop showing duplications, and then sort by the comment field. This will allow you to determine whether only the duplicates were shown in the show duplicates, or the originals. If you see any without comments, then you can go ahead and delete the duplicates. -
What is the 3rd party player that will open a windows media player on the MAC
What 3rd party player provides the ability to open .wmv file on a Mac? We have QuickTime Player but it does not recognize the file.
Thanks for responding Barney-15E. I did install the free version of Flip4Mac prior to sending my question out to the community. I still could not open the file. After I installed Flip4Mac a window opened stating QuickTime Player does not recognize the file. How do you make it go through Flip4Mac instead of QuickTime Player?
-
Any 3rd party utilities that fix full screen mode for multi-monitor users?
I am a multi-monitor user. As multi-monitor users know, full screen mode is basically useless since if you try to go full screen on one monitor, it causes the other monitor to go blank and become unusable (at least with most programs). Are there any 3rd party utitilities or fixes for this?
ThanksSpaces, which is what this functionality stems from, was limited in that it used your entire setup and switched all of the screens over; space to space. I never used spaces because I always had multiple monitors and I was always working with multiple apps simultaneously that I wanted to be able to reference while working on the others.
Now they call Spaces, "mission control" and changed the appearance of it, but the functionality remained the same, each workstation comprised all of your monitors, and would switch over all of them when switching to a new "Desktop".
Fullscreen apps wrongly assumes that it can take the functionality of the afformentioned MS/Spaces and use it for one app, negating the whole idea of why someone would have multiple screens (real estate to work with other applications).
If they stop considering multiple monitors as one Workspace, they can then make it so they are asynchronous "tablets" instead of one conjoined entity.
So, you say people have been asking about this for 2 years, I've been asking for this for 5!
The issue here is, the only answer is to not use it. Making Mission Control and Fullscreen apps completely ignored by people like us, where I could be using both functions to glide around my work station and three monitors, mixing and matching which apps I want to be viewed on each separate monitor, to perform one single task; together.
It would actually reward people who wanted to utilize Thunderbolt technology and have more then one monitor.
There is no telling why apple chose to push out something that would only support the casual user, with one display, but the only direct way to let apple know that we feel limited by the OS is to send feedback. Even though it seems that we are powerless in this situation, I hope that they do consider how to make this function better.
</rant> -
Many 3rd party apps that I have used before now will not open with the alert "XYZ application cannot be opened because the identity of the developer cannot be confirmed" Why now since I updated Mavericks?
The format in which a developer has to sign his application in order for it to be recognized as signed has changed. Update the applications, wherever possible.
To make a one-time exception to the security policy, follow these instructions. They apply to Installer packages and other installable items as well as applications. -
I have a MacBook Pro laptop purchased in June 2011, and the superdrive no longer works. Rather than have it replaced, I'll buy a 3rd party superdrive that plugs into the USB port. Does the external superdrive need it's own power source, or will the USB port provide enough power?
The Apple external SuperDrive actually exceeds the allowed power draw. Because of this, it is only trouble-free on certain models that accommodate this excess.
All others require an external Power source. -
Is there a USB 3.0 card that will work in my 2009 Mac Pro running Yosemite?
Is there a USB 3.0 card that will work in my early 2009 Mac Pro running Yosemite?
As established in their compatibility chart, the MaxPower USB/Esata card is compatible with Osx 10.10 Yosemite.
http://eshop.macsales.com/shop/compatibility/OS_X_10.10_Yosemite
You may want to contact MacSales for further advice. -
I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.
Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
G5 PCIe options are listed here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html -
I have a 3rd Generation iPod that will NOT connect to our internet connection at home. Message on screen keeps saying it is 'unable' to connect. Yes I have already reset to default factory settings, No we do not have our service encrypted or password protected, anyone else have any other viable suggestions as to how to fix this problem?
Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Diagnosing a 3rd party servcie that hangs or stops on it's own
Hi.
I'm encountering some challenges with a 3rd party service that hangs or stops on it's own (and when self-stopping, hangs.) The challenge being that neither it's logs nor the Event Viewer contain any details. It stops logging itself when it hangs or stops and
the event viewer only records that it stopped and/or started, but nothing else.
What is the current recommended method for doing *unattended* dumps on running processes? Most of the tools I am familiar with seem t be obsolete. I've bee trying to search the web, but most of what I have found is related to known issues with specific services
and is of little use.
I'm not expecting anyone to give me a long drawn out list, but if anyone could suggest a link to a web site or even a thread somewhere on these forums that describes a method it would be much appreciated.
Thanks,
DanYou might try them over here.
Windows Desktop Perfmon and Diagnostic tools forum on MSDN
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Hi,
Can anyone help me please.
I have a Personal Video Recorder (Humax HDR-1010S), which supports DLNA, connected to my home network via Wi-Fi.
I want to play music from iTunes and view photos from iPhoto from my MacBook (which is also connected to the home network) via the PVR / TV / Home Cinema sound system. I understand that my MacBook (running OS X Mavericks) doesn't support DLNA server.
Is there any 3rd party software that I can install on my MacBook to provide DLNA server?
Thanks,My recollection is that the iPhoto library has some fairly robust protections to prevent inadvertent or even deliberate changes being made that might have unwanted consequences. I'll take alook at my setup and let you know if I can see anything that might help you. Even if you get Serviio to "see" the iPhoto library, it almost ceratinly won't show the album structure and names. What I did is to export each iPhoto album to a standard folder with the appropriate folder name. These I keep on an external backup disc and Serviio can see these without trouble.
-
Is there any third party software that will allow me to print CD labels from iTunes?
I want to be able to print a CD label from a song list I burnt to CD in iTunes. Is there a third party software that will let me do this since iTunes won't?
Hi,
If you wish to merely transfer files, one idea could be to have one ftp or web server on each machine, and then use appropriate clients (ftp programs or web browsers).
TCP/IP software is available under System 7.5.5. The 8100/100 can use standard RJ-45 Ethernet cabling via a suitable adapter for AAUI-15 (such as the Apple Ethernet Twisted-Pair Transceiver M0437).
For the Mac, the now free program NetPresenz could perhaps be of interest as a server solution.
Jan -
Need a sound card that will work with my speak
i have the creative Digatal 5700 speakers and i need a card that will work with them using the digital DIN input. also dont have alot of money,and would like with the control panel on the front of the pc like the fatalty.
The <A href="
http://us.creative.com/products/product.asp?category=&subcategory=205&product=907"]Audigy 2 ZS Platinum[/url] should be able to fit your need.
Jason -
A friend has just brought me their first generation aluminium macbook that will not start. Start up stops at white screen with curser. Any ideas?
Thanks for the help. I didn't know how to do a safe boot. It allowed me to get into disk utility and that sorted it out.
-
What is the best ATI Radeon Card that will work in a mid 2012 12 core mac pro?
What is the high model # ati Radeon Graphics card that will work with my new mid year Mac Pro 2012 .. 12 core, If I use 2 cards can I have up to 6 screens operating
How much from Apple is a 5870 card? Can it be purchased for less somewhere else? Can it be used in conjunction with the stock 5770 card?
Thankyou
StuartOne or two Apple-firmware 5770 cards can be used simultaneousy in a Mac Pro. It requires ONE Aux power cord for each card.
ONE Apple-Firmware 5870 can be used in a Mac Pro, as it requires TWO Aux power cords, and that is all that are available.
Please tell us more about what you are trying to accomplish, and you will get more help. Readers do not want to have to write a book-length answer to your overly-vague query.
Maybe you are looking for
-
All, A quick question. How do we replace the value of role attribute with some other value? When I try to set it, the new role is just getting appended. I wanted to remove the olde role and set the new role. I know I can remove the roles by settin
-
Sql services are not able to start in server
We have rebooted inactive the server due to rolling maintenance. Sql is not running and sql services are not able to start. Getting the below error message while starting the services. please suggest how to fix?
-
Loop break in an Internal table
Hello, I have an internal table with many vendors and each vendor may have multiple line items. Now if a line item has incorrect data then that vendor shudnt get created and move on to the next vendor..As i show here v1,12,ea,3444 v1,12,ea,3445 v1,12
-
How do you scale a pattern down?
Hi all. I have a drawing that uses a pattern fill (swatch); to make the pattern fine enough in relation to the objects, the drawing is much larger than the page. How can I shrink the drawing down to fit on the page and shrink the pattern? Thanks!
-
Hi, I am looking for a way to remove usage rights from a pdf with the adobe reader. My scenario: I made a form to be filled out by our receptionist using acrobat pro 8.0 and live designer. She fills it out (its an order ack. form) by opening it in th