Is their roadmap for the next major release of Netweaver stack?

In the ERP area, I found this link that mentions a roadmap for mySAP ERP2005 and beyond.
Is there a corresponding "beyond NW04s" roadmap? Or is the next major release of Netweaver targeted for 2010 as is the next major mySAP ERP release mentioned in the above mentioned roadmap?
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5bd723c2-0d01-0010-97a5-cb14fe7f2810">mySAP ERP2005 roadmap and beyond</a>

Tobi, I can't go too far into it, but I can assure you that the next major release of Netweaver will not be in 2010. The idea is that you will be able to upgrade your Netweaver layer without upgrading the core(ECC). That means that you can stay current with technology while your business stays the same. So there will be Netweaver releases every so often before 2010.
Regards,
Rich Heilman

Similar Messages

JSE 6 needed for the next major version of the Mac SAPgui

Apple has a developers' preview version JSE 6, but they don't yet support it. Hence, the Mac version of the Java SAPgui doesn't yet use JSE 6, even though the Java SAPgui on other platforms does use JSE 6. It is likely that by the time of SAP's next major release of the Java SAPgui, Apple will support JSE 6 and the Mac SAPgui will require it.
Currently Apple's implementation of JSE 6 requires a 64-bit Intel processor running Leopard. If this remains true in Apple's final release of JSE 6, then the next major release of the Mac SAPgui won't run on any MacOS X prior to Leopard and won't run on PowerPC or 32-bit Intel based Macs even with Leopard.
I'm told that Sun has both 32-bit and 64-bit JSE 6 JVMs for Windows, for Linux, and for Solaris.
My organization (MIT) has submitted a bug report to Apple about this. It is possible that Apple might pay more attention if a number of their customers made a joint request.
If your organization would be interested in joining such a joint request to Apple to support JSE 6 on (at least) all supported Leopard platforms, please let me know.
Thanks.
/David Rosenberg    <[email protected]>
P.S. If you work for Apple and you think you might be able to help with this, please contact me.
/David

Here is the current situation with respect to SAP's Mac JavaGui and
Apple's Java SE 6, as I understand it:
a. The SAPgui for Java 7.20 is planned for the fourth quarter of
   calendar 2008.
b. SAP's support for the SAPgui for Java 7.10 is planned to end on
   31-Dec-2008.
c. The Mac SAPgui for Java 7.20 will be able to use Java SE 6.
d. SAP has not yet decided whether the Mac SAPgui for Java 7.20 will
   also be able to use an earlier version of Java (i.e. J2SE 5.0).
e. Apple's Java SE 6 is only available for Mac OS X 10.5.2 and later
   on 64-bit Intel-based Macs (not PowerPC-based or 32-bit Intel-based
   Macs). Apple has not mentioned any plans to support Java SE 6 on
   any PowerPC-based or 32-bit Intel-based Macs or any Macs running
   Tiger, although there is a possibility that Apple might announce
   support for some of those platforms at their upcoming Worldwide
   Developers Conference (June 9-13, 2008, in San Francisco).
f. Sun has both 32-bit and 64-bit JSE 6 JVMs for Windows, for Linux,
   and for Solaris.
g. The last PowerPC-based Macs (Power Mac G5) were sold in August 2006
   and the last 32-bit Intel-based Macs (Mac mini) were sold in August
   2007.
h. Assuming that the Mac SAPgui for Java 7.20 will require Java SE 6
   and Apple doesn't extend their support of Java SE 6 to other
   platforms, then as of 1-Jan-2009, you won't be able to run an
   SAP-supported version of the Mac SAPgui for Java on PowerPc Macs
   bought as recently as August 2006 or 32-bit Intel Macs bought as
   recently as August 2007 or on any Macintosh running Tiger.
Best regards,
/David M Rosenberg         <rosenberg at mit.edu>

Apple pls look here: Some "quick wins" for the next firmware release

Hi!
First of all: Thank you, Apple, for Update 1.0.3! The most annoying bugs are fixed and the click wheel works better (but in my opinion the quick wheel of the iPod nano works still even better).
Please allow me to suggest a few "quick wins" you could easily (in my opinion) include in the next firmware release:
+ Please add an option to turn off that "screensaver" or to change the time until it turns on
The "screensaver" wouldn't be that bad when:
+ It would display "now playing" information in a large font (better readable than the normal "now playing" when the background light is off
+ The screensaver clock would display 24h format, when configured
Best regards, Jens

It's a waste of time posting this here because it's a user to user forum and no-one from Apple (except maybe the forum moderators) will see it.
Please use this link.
iPod Feedback.

Using physical standby to upgrade to the next major release

Hi
Can one use a physical standby to upgrade from 9i to 10g or from 10g to 11g ?
We cannot use logical standby due to datatype problems
Thanks
Orna

You can use logical standby to perform a rolling upgrade, if you are above 10.1.0.3 - see http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_RollingUpgradeBestPractices.pdf
Also see http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_TransientLogicalRollingUpgrade.pdf
HTH
Srini

I want to buy a new laptop so my question is should i buy the new 2013 macbook air 13in or wait for the next model (june 2014) ?

This will be my first mac laptop, so my question if i am goin to miss a huge jump in the specifications for the next year release or not ?

We know there will eventually be a new MacBook Air (though the terms of use here prohibt speculation about it). We have no idea when it will come out or what it's specs will be. Retired Engineer's advice is exactly the same as mine. If you need a computer now, buy it. It is a powerful computer and except for the fact there's no 2TB SSD available (not that I could afford it if one existed) it could be my one and only computer. If you merely want a new computer, wait until you need one.

Material Ledger - release actual price as the standard price for the next-

Hi Gurus, Sap Library /documentation about Material Ledger says:
"At the end of the period, an actual price is calculated for each material based on the actual costs of the period. This actual price is called the periodic unit price and can be used to revaluate the inventory for the period to be closed. In addition, you can use this actual price as the standard price for the next period."
How Can I do that? i've calculated the new actual price but i could release it as a new standar costo.
Kind Regards
André

Hi Both,
I think there is something else to add to this, the new PUP price can only be applicable in the period N+2 where N=Period of closing. This is something that is not specifically mentions in SAP documents.(not that I know of ) but I found it the hard way!
Cheers

When will the next ESR release be available?

Hi - I am writing some GUI based code and plan to release towards the end of the year. I imagine that a new FF ESR will be available by then. When will the new version of FF ESR be available so I can try and ensure that we test our GUIs using it? Thanks in advance!
F

hello Dubrovsky, the next major ESR version will be firefox 31, which is going to be released on july 22nd. automatic updates for ESR users on the current 24-brach to 31 will be starting mid-october.
so you should test the code against firefox 31, which is currently in the nightly stadium: nightly.mozilla.org

SEVERE: An error occured while scanning for the next trigger to fire

Hi All,
I followed below steps to configure Oracle BI publisher scheduler on oracle 10g database.
1.Log in to BI Publisher as a user with Administrator privileges and select the Admin tab.
2.Under System Maintenance, select Scheduler Configuration.
3.Enter the database connection information for the target Oracle database and user.
Database Type: 10g
Connection String: jdbc:oracle:thin://<hostname>:<port#>:<oracle SID>
Username/Password for the database user
Database Driver Class: oracle.jdbc.driver.OracleDriver
4.Click the Test Connection button to make sure the connection information is valid.
5.Click the Install Schema button to install the scheduler tables.
6.Restart the BI Publisher application.
The Schema installed successfully.
But when I am starting the weblogic server I am getting below error and BI publisher application is not getting up.
INFO: Handling 6 triggers that missed their scheduled fire-time.
23-Dec-2011 05:29:38 org.quartz.core.ErrorLogger schedulerError
SEVERE: An error occured while scanning for the next trigger to fire.
org.quartz.JobPersistenceException: Couldn't acquire next trigger: Couldn't retrieve trigger: Invalid column name [See nested exception: org.quartz.JobPersistenceException: Couldn't retrieve trigger: Invalid column name [See nested exception: java.sql.SQLException: Invalid column name]]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1773)
at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
* Nested Exception (Underlying Cause) ---------------
org.quartz.JobPersistenceException: Couldn't retrieve trigger: Invalid column name [See nested exception: java.sql.SQLException: Invalid column name]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveTrigger(JobStoreSupport.java:1126)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1759)
at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
* Nested Exception (Underlying Cause) ---------------
java.sql.SQLException: Invalid column name
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:199)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:263)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:271)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:445)
at oracle.jdbc.driver.OracleStatement.getColumnIndex(OracleStatement.java:3372)
at oracle.jdbc.driver.OracleResultSetImpl.findColumn(OracleResultSetImpl.java:2009)
at oracle.jdbc.driver.OracleResultSet.getBinaryStream(OracleResultSet.java:668)
at org.apache.commons.dbcp.DelegatingResultSet.getBinaryStream(DelegatingResultSet.java:233)
at org.quartz.impl.jdbcjobstore.oracle.OracleDelegate.getObjectFromBlob(OracleDelegate.java:154)
at org.quartz.impl.jdbcjobstore.StdJDBCDelegate.selectTrigger(StdJDBCDelegate.java:2382)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveTrigger(JobStoreSupport.java:1115)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1759)
at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
23-Dec-2011 05:30:55 org.quartz.core.ErrorLogger schedulerError
The system details are as below :
BI Publisher version : 10.1.3.4
Oracle DB : 10 G
Weblogic server :10.3.2
Please suggest to resolve this issue.
Thanks,
Sachin

Hi,
This errors occurs if you have configured some schema for the scheduler and configured it on BIP, but the configured schema is no longer available.
That is why I am suggesting you to replace the current quartz.properties file with the original file that exits during installation.
Then try to start the server, and see if the server starts without error.
After that you can try to configure the scheduler from BIP console.
thanks,
sandeep

The Nordins - Options for the next time you need a customer!

The headline is from an email we received: "Verizon - Options for the next time you need customer service!" Well, we changed it, just slightly. Well, on 6/20/2013 we had the TV down; it was said to be a piece of video equipment that went down. We could not get anything on the TV until next day. The sad part is that we were watching the Heat-Spurs game and it quit just 1min-36sec. prior to the end of the game. Then, we could not watch our daily Netflix show we watch every evening before going to bed. So in calling twice, we found out about the video equipment problem. But typically Verizon, they replaced the equipment and thought nothing about the customer that actually lost the reception!! How about crediting us for the time "off the air". You can't have the cake and eat it too. Then, Verizon sends us emails about the bill, customer service, etc. but there is no way for us to email them back!! Why do they think my time is less valuable then theirs; having to call their customer service and to wait a long time for answer by someone in "God knows where country". What does that tell you about the customer service commitment! It's like, yeah you are one of the slob users that keep paying the bills for lousy service. Perhaps it's time for all of us to switch off our TV's for one or two days a week and not pay them for "our time off the grid". Having some couple of thousand TV's off twice a week may shake them up a bit. So here is my idea. Establish an email address where we can reach anyone in customer service directly, in our own state, not somewhere 1000 and more miles away. Additionally, if something is down, does not matter what time of the day, stand up for it and give the customer their credit due. Thanks for reading

It all depends how you use it.
Once the initial break in period is over, like the first year, it should run just fine as long as you don't abuse it, don't let it overheat, keep the dust out etc.
Do get the AppleCare as it's very expensive to repair a Mac.
Some tips:
1: Avoid using the built in keyboard and trackpad as much as possible. I know what's the use, but it's these too area's, the USB ports and the Superdrive that experience the most wear and tear.
2: If you do use the built in keyboard, take off your watch and jewelry, it scratches. mars, reacts with the case and discolors it.
3: The keybord is a bit weak compared to regular PC desktop keyboards, so use a wireless one, but have a wired one around for emergencies. The keyboard collects dirt, grime, hair, dust etc, underneath, you might want to have a light cover over the keys but still let air get underneath.
4: Be gentle with the audio ports and the Superdrive, don't use your computer for watching DVD's. The Superdrive is important for recovering the machine with the installer disk which also must be well taken care of.
5: A GOOD case, like a MacTruck or a padded one will absorb the shocks if dropped while transporting.
6: The biggest concern is other people, they just don't handle things with care because it's not theirs and they are ignorant or even spiteful of the money you spent to have a quality machine.
7: Clone your boot drive to a external regularly, in fact have two, one staggered back in time a few weeks, it's hold option bootable in case your hard drive dies. Free cloning software like Carbon Copy Cloner or the commercial version Superduper does the job well.

Doubt about changes in the routing for the next year

Hello All,
I have a question hope for you guys to gave a brief and technical answer to me.
I have some doubts, one doubts is in the actual routing, can I change the Valid to ( Date) in the routings in the operation. (Example. original valid to date is 31.12.9999 i want to change this with 31.12.2007). Because we want to create new routing with changes for the next year. But it´s necessary the new routing is valid from 01.01.2008 and valid to 31.12.2008.
And I can´t 2 routings with the same valid for 01.01.2008
I have many routings for change and I have other option like change the status (create or release).
Other doubt, the user has a excel file with the changes necessary, how can I upload from excel file to SAP R/3. It exist one program, one procedure u other option.
Your kind response is what am ex[ecting expert. Thanks,

Hi
pl use the ECM functionality (engineering change functionality) for the same..its standard SAP and no need for any special config..
You can channge the same routings by giving the effectivity date in ECR (eng change request)
for creating an ECR pl follow the below steps
=Create Engineering change request - TCODE - CC31
=Click on object type after entering this screen parameters
=Click on status management
=and change status by clicking on Check request
=Select the required objects types to be changed and click on objects to reach the below screen
=Enter the required objects to be changed via selecting appropriate tab.
=Select the object and click on details
=Click on status management
=Go to Header and click on status
=Change the status by clicking upto convert request.
=Click on the save button and Engineering Change Request has been created..
IMP Notes -
Do close and Release the Engineering change request after doing the appropriate changes at both Object level and Header Level
Pl come back for any further clarifications..
rewards will be appriciated if found useful
BR
Sumit

How do I optimize "Waiting for the next frame"

When running my swf file in release build, the first time I start the browser after cleaning the browser cache, the .swf will appear in less than a second. If I attach scout, I can see it is around .7 seconds to finish.
However, after this run all subsequent times I load the page, it takes ~3 seconds.
When I look at scout, I see almost identical CPU and memory use , but it is spending ~2.3 seconds "Waiting for the next frame". (almost an extra 700ms per frame).
There is no requirement for animation, all of the content is very static. I'd just like to render it as fast as possible.
I know it's not related to caching the .swf file because I have tried turning off the caching (by adding a random parameter) and verified using Httplogger that it is always downloading a new .swf file. (I turned back on caching). So I'm kind of not sure what to do next...
What things can I try to optimize this? Are there places I can read about this issue?
(P.S. >> I notice it spends a lot more time "Waiting for the next frame" when I build a debug version. Don't know if that's relevant...)
Thanks!

There's nothing you can do about "Waiting for next frame" - this is simply the time when Flash Player has finished doing everything it needs to do for the frame, and waiting for the OS to wake it up again. This depends on the framerate you set in your swf - roughly speaking, the waiting time is the budget (1/framerate), minus the time Flash Player spends doing actual work.
You can find more information here, about understanding how the data you see in Scout relates to how Flash Player works:
http://www.adobe.com/devnet/scout/articles/understanding-flashplayer-with-scout.html
btw, you shouldn't look at performance in a debug swf - you'll get wildly misleading results.

Latest PeopleTools patch for the next PeopleTools only upgrade

Hi All,
Is it mandatory to be in the latest PeopleTools patch for the next PeopleTools only upgrade?
For eaxmple, I am in PT8.50 and I plan to upgarde to PT8.51. Is it mandatory to apply the latest patch(PT 8.50.14 Product Patch) before the PeopleTool upgrade?
Thanks
Soundappan

Whether it is not mandatory to be on the latest Peopletools patch for a Peopletools version upgrade, you should be on the least recommanded one if any. It is maybe playing on words, but hope you see the difference.
It is well explained in the following pdf, page 16 :
http://download.oracle.com/docs/cd/E18563_01/psft/acrobat/upt851_091010_upt851.pdf
"+*Download required for upgrade fixes.*+
+Before you start applying this upgrade, check the list of required fixes. It is very important that you+
+download all Required for Upgrade fixes for PeopleSoft PeopleTools. Go to My Oracle Support, Patches+
+& Updates, PeopleSoft, and search for the PeopleSoft PeopleTools Required for Upgrade fixes for your+
+new release.+"
Nicolas.

Translating pacman for the 4.2 release

Hi everyone!
I plan to make the next pacman release during the week of the 8th of December.
One thing that we need help with is translating all the strings into lots of languages. We have a good teams for many languages, but there are quite a few that have been started and never finished and some potential omissions.
If you would like to help, take a look at our transifex page. https://www.transifex.com/projects/p/archlinux-pacman/ The languages with at least 88% translated will probably get done by the current team, but if you want to help with any less complete language or add a missing one, just apply on the site.
Let me know if you have any questions.

That is a really awful string...
In pacman-4.2 you can do "pacman -Syu --assume-installed perl-5.20" and that will make pacman act as if perl-5.20 is already installed. So that is when the "assume installed" entry is passed to the backend.
I'd guess the "assume installed" should really be joint by a hyphen and not translated... I'll change that next release.

I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
tt2

HT1918 I would like to change the data of my credit card. For the next year I live in Germany, I have a geman visa card, but I want the itunes and everything to be in english language. How can I do this?

I would like to change the data of my credit card. For the next year I live in Germany, I have a german visa card, but I want the itunes and everything to be in english language. How can I do this?

You cannot.

Is their roadmap for the next major release of Netweaver stack?

Similar Messages

Maybe you are looking for