Is there a 10.7.5 update that isn't bundled with Safari 6?

Hi, I'm currently running 10.7.4, I'd like to update to 10.7.5 so I can purchase aperture 3.4. I know at one point safari 6 was bundled with the 10.7.5 update. I cannot use Safari 6, I use RSS for work, the native Safari RSS is the easiest and most effective for my work. Is there a stand alone 10.7.5 update without Safari 6.? I've looked at the information offered with the 10.7.5 updates and found no mention of Safari but that doesn't mean it's not in there. Any help would be greatly appreciated. Thanks in advance.

No. Create a copy of Safari before running the update.
(77543)

Similar Messages

When I got the prompt to update my iPod Touch 4th generation, the update claimed to have over 200 new features including Siri. Is there going to be another update that would make this a true statement?

When I got the prompt to update my iPod Touch 4th generation, the update claimed to have over 200 new features including Siri. Is there going to be another update that would make this a true statement?

No Siri on 4G Footnote 2 of
Apple - iOS 6 - iPhone, iPad, and iPod touch get 200+ new features.
says:
Siri is available on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access.

HT4962 Are there any movies or tv shows that can be played with the Touch?

Are there any movies or tv shows that can be played with the ITouch? Attempted to download a tv show, however was advised it was not supported. Is there a way to configure the show to be played?

See:'
iTunes: Frequently asked questions about viewing and syncing videos
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
There are third-party converters like the Free HandBrake program.

Is there a "third party" gps transmitter that i could use with iphone to locate my bike?

Is there a "third party" gps transmitter that i could use with iphone to locate my bike?

Interesting. Would I have to jailbreak my phone or both in order to help out my Dad?
What features in the Jailbreak would allow me to perform the remote support like LogMeIn?
Thx!

Itunes can update that add search movies with subtitles in Russian (buy or rent)

itunes can update that add search movies with subtitles in Russian (buy or rent)

Did you find an answer? I want the same information. Thanks.

How to remove an app update that isn't mine

i always have an update in my app store updates for Angry Birds that isn't associated with my iTunes accounts. how do i get rid of it?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
If you are seeing a stranger's Apple ID associated with this Angry Birds update, see here;
https://discussions.apple.com/message/17179333

I uninstalled FF4 because it's buggy. Some kind of dumb dialog box keeps opening, and there's much that isn't compatable with new version.

I want to go back to firefox 3,6. I uninstalled FF 4 because it's buggy. I don't like it. There's a dialog box that keeps opening. That never happened before. It's damned annoying and not necessary.
There are a number of items that no longer are compatible that once were.

I want to go back to firefox 3,6. I uninstalled FF 4 because it's buggy. I don't like it. There's a dialog box that keeps opening. That never happened before. It's damned annoying and not necessary.
There are a number of items that no longer are compatible that once were.

Is there a way to order music that isn't on i-tunes

is there a way to request, or order music that isn't presently in the store?

You can order/buy music from whomever you like.
You can request from itunes: http://www.apple.com/feedback

Updated DPS won't bundle with sidecar/let me import sidecar

Hello all
Having a very strange problem here
I'm running adobe CC (indesign) all updated to the latest versions etc on a 2.2ghz i7 macbook pro on OSX10.8.4
Now - The folio builder lets me bundle without a sidecar file (not handy)
I used to be able to import said sidecar file through the import multiple items option but now... nothing.
And I can't even bundle with the sidecar file in the stacks folder...
Very annoying because both options were working a treat before I updated to the latest drop.
(I have validated the sidecar through w3 also so there's no problem there)
Anyone got any ideas... I know it's vague but maybe I'm not the only one experiencing this?
Thanks in advance
Tim

Update;
I forgot to mention - when I select import multiple articles
(both after bundling without the sidecar/bundling with the sidecar along side the stacks)
the folio builder panel does NOTHING, it just sits there, won't let me change anything won't let me do anything - I can open/close other panels but also inDesign doesn't let me "Quit" and doesn't say it's not responding - but this is after a wait time of 5 minutes of the panel doing NOTHING
what the heck is going on?!

Accidently downloaded a game that isn't compatible with my ipod!

i've downloaded sonic for £3.99 then realised that it isn't compatible with my ipod touch. does anyone know if its possible to swap it for an application that is or to get my money back??
any input appreciated.
thanks.

Click here and fill out the form for assistance.
(39297)

Is there a way of seeing music that isn't in a playlist

Hi there, Im new to itunes so please be gentle with me...
i am trying to put all music in to playlist but am getting a bit confused as to what ive put in a playlist and not.
i know you can right click on a track and see what playlist that one song is in but with over 20000 tracks imported i would be very impractical so was wondering if there was a way of seeing everything that is un-playlisted??
thanks for all your help in advance
Dougie

You can order/buy music from whomever you like.
You can request from itunes: http://www.apple.com/feedback

Are there glitches in iMovie or iDVD that would create problems with viewing a finished project on a standard dvd player?

Everytime I render a new project in iMovie and share it with iDVD to produce a video, there always seems to be glitches in the finished project. I have gone back and tried to recreate the slideshow, but have not had a whole lot of luck. I am wondering if I need to delete the iMovie and iDVD applications from the computer??? If I do that will it fix my problem or will I even be able to redownload the programs without having to pay for them again? I have spent more time and $$$ trying to get a viewable disc to burn and am ready to get rid of the computer altogether. Hopefully that will not have to happen, but this is a constant issue that I go through everytime I work on a project. Any suggestions???

Hi
Yes and No.
There are Bugs and ways to make better or Worse DVDs - see if this can help.
There are two "Bugs" (or at least one)
• In iDVD - do not go back to video editing program - if You got Chapters set in Your movie - if You try - then now back in iDVD it will ask You to up-date ==> all Chapters will point to Chapter one. Medicine - create a brand new iDVD Project.
• There MUST NOT BE any Chapter mark set in very beginning of the Movie - or in any transition or within 2 seconds from them.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser ( AND AS MEDIUM - not HD etc as DVD then will suffer in quality ) or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeaskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

File Browse - is there a post-selection "entry point" that I can work with?

Hi:
I'd have a form that is uploading a document, and on the form is a TITLE text area. I'd like to have the title be the name of the file minus all the path info and extension by default. I was hoping there would be some are to put some scripting in that runs only after a user has made a selection with the browse item. Is it possible to do this in HTML DB?
Thanks.

Michael,
In principle this is possible. You'll have to use some Javascript to make it happen. I say in principle, because the <input type="file"> form element has special security rules applied to it in most browsers that may prevent you from addressing it with Javascript (certainly write values to it, for obvious reasons).
Here's a static HTML file that copies the full path into a seond field when you click the Bingo! button. You'll have to do some more work to strip off the leading path. Among all of us on the form I'm sure we'll figure it out.
<html>
<body>
<script language="javascript">
function makeCopy ( what )
what.dummy.value = what.myfile.value;
</script>
<form name="myform" action="foo">
<input type=file name=myfile>
<input type=text name=dummy>
<input type="button" value="Bingo!" onClick="javascript:makeCopy(this.form)">
</form>
</body>
</html>
See also our Javascript How To:
http://www.oracle.com/technology/products/database/htmldb/howtos/htmldb_javascript_howto2.html#button
Sergio

I notice that there is music in my icloud that isn't showing up in the music on my iphone

I usually purchase all my music on my phone and I back up to icloud. I plugged my phone into my PC with itunes open and notice that there is some music that is in icloud but when i look at "music" on my iphone4, i dont see it. Why is this and what can i do to fix it?

iCloud doesn't store movies that were not purchased from the iTunes store unless they are special digital copies that came with a purchased DVD and are designed to be compatible with iTunes in the Cloud (not all are). Other movies have to be synced to your phone using iTunes.

Are there certain external Hard Drive cases that aren't compatible with Mac

I have a new 160gb Hitachi hard drive and connected it to a Vantec NexStar usb 2.0 hard drive case (borrowed from a friend).
Disk Utility sees the external disk...however, whenever I try to Erase or Partition, the Disk Utility hangs. In Activity Monitor, it shows up as "not responding". I even left it over night to see if it recovers itself but no luck. I've tried the MacOS Extended (journaled), MacOS Extended, and MS-DOS types.
I'm wondering if this case is incompatible with Macs? I would prefer a case that has firewire though...so I might just buy a new case to try?
Has anyone run into something similiar?
Thanks!

Thanks for the idea...not sure why I didn't try that.
My new iMac recognized the drive immediately and asked if I wanted to initialize it. Took about 2 minutes. When I connected it to my MBP, it saw it right away...
I'm still not sure why the MBP couldn't initialize the drive when I tried...
Oh well, important thing is..it's working now..and I've backed up my iTunes and iPhoto libraries.
Thanks again!

Is there a 10.7.5 update that isn't bundled with Safari 6?

Similar Messages

Maybe you are looking for