Is there a automate function such as "batch" in Aperture??

i've been using Aperture for a while
it's such a great and humanity software
I'm quite satisfied with it
but there is one thing bothering me right now
if i'm going to edit thousands pics once in one adjustment such as "level" or another feature
how can i make it easier and faster?
is there a way like the batch of the photoshop in Aperture??
thx for sharing and replying
best regards
P.H

Welcome to the forum.
Lift-and-Stamp should do what you want.
Ian

Similar Messages

In the program pages there is a function that automatically will save may document not only one i click save

in the program pages there is a function that automatically will save may document not only one i click save

In Lion and Mountain Lion you must save the first time then it will autosave for you with versions.
ForEverSave, a 3rd party application, might actually prompt you after a set period. Check it out and any alternatives.
Peter

Is there any function for the Batch assignment of production order

There is one function in the CO02(Production Order) which named "BATCH ASSIGNMENT".
CO02 -> Components -> Batch assignment
But the function only can assign one material one time.
This is very boring.
So we are planning to create a new program for it.
But I can't find any function moudle or BAPI can be used.
Could anybody give me some function moudle or BAPI for it?
Tks

Hello~~~Is there any body here?

Is there any standard function available for generation of RIN number.

Hi experts,
RIN is Renewable Identifiaction Number.
Structure for a RIN is a 34-character numeric code in the format:
YYYYCCCCFFFFFBBBBBRRDKSSSSSSEEEEEE
YYYY = Year of Batch Production (when it leaves the facility)
CCCC = Company registration ID
FFFFF = Facility registration ID
BBBBB = Producer assigned Batch Number
RR = Equivalence Value for the renewable fuel
D = Renewable Type Flag (1 - cellulosic; 2 - non-cellulosic)
K = RIN Type Flag (1 - standard, 2 - extra-value)
SSSSSS = RIN Block Starting Gallon Number
EEEEEE = RIN Block Ending Gallon Number
Is there any standard function avaiable in R3 to generate such number?
Please reply asap.
Thank you in advance.

Hi deepak,
1. we can use the FM
DATE_CHECK_PLAUSIBILITY
regards,
amit m.

Using GUI_DOWNLOAD Function module in Batch

Hi All,
I use the subject function module to load the data into a .xls file. I find no error while I run my program directly. But when I run it in Background it throws an unknown_error. Tried to debug, while in background (by introducing a infinite loop and releasing from the loop with the exit condition). I couldn't get into the function module to debug.
Needed information on how else can I find what the error is and is there any other function module (other than ws_download and gui_download) which I could use and find no errors while running in background.
Thanks,
Aaron.
This is what I am doing:
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE
ENCODING DEFAULT.
if sy-subrc = 0.
Loop at te070 into se070.
Transfer se070 to p_file.
Endloop.
endif.
close dataset p_file.
This creates a file in the app server in Batch and I will have to run a program online to dowload the contents from the server. My requirement is that I need to download the contents in Batch to my local file. Is this possible by any means? (Can we create a windows executable file (.EXE) and use it in a windows batch file (.BAT)?)
Message was edited by: Aaron Anthony

Hi Gopi,
This is what I am doing:
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE
ENCODING DEFAULT.
if sy-subrc = 0.
Loop at te070 into se070.
Transfer se070 to p_file.
Endloop.
endif.
close dataset p_file.
This creates a file in the app server in Batch and I will have to run a program online to dowload the contents from the server. My requirement is that I need to download the contents in Batch to my local file. Is this possible by any means? (Can we create a windows executable file?)
Thanks for your help.

How To Store XML Fragments Using Functions Such As XMLElement

Hi
Not sure what I am missing. I wish to store XML fragments in variables so can pass around and concatenate with other fragments to make final XML document. Even before attempting to concatenate XML fragments, I am struggling to store any XML fragment in a variable. I am trying to use simple functions such as XMLElement to generate XML so can store in variable. I have seen many examples of XMLElement in SQL select statement. Can XMLElement be used in plsql? XMLElement says it returns value of type XMLType. Functions such as XMLElement make generating XML easier than creating all tags manually.
Below is simple example that demonstrates what I would like to do. I would like to be able to pass the XML fragment as either XMLType or clob. I receive error saying PLS-00201: identifier 'XMLELEMENT' must be declared
declare
vTheData XMLType;
vTheDataClob clob;
begin
vTheData:= XMLelement("empno",'1234567');
vTheDataClob:= xmlelement("empno",'1234567').getclobval();
end;
Where as I can use below, but surely don't have to use select into from dual method. I just expect can use XMLElement function in plsql same as sql, such as most other functions eg length, rtrim etc.
declare
vTheData XMLType;
vTheDataClob clob;
begin
select xmlelement("empno",'1234567')
into vTheData
from dual;
select xmlelement("empno",'1234567').getclobval()
into vTheDataClob
from dual;
end;
Hope this makes sense.
Thanks

Having said that, is there a more elegant way to achieve below. That is populate two XML fragments and concatenate together.
Sure, why not just only one statement?
select XMLConcat(
XMLElement( ... )
, XMLElement( ... )
into vTheResult
from dual;
As a second question, is it better to build and pass XML fragments as XMLType or clob?
I would say stay with XMLType but it depends on your requirement.
I generally avoid passing around pieces of data, SQL/XML functions are powerful in the way they can be used with set operations, so using them in a piecewise approach kinda negates what they're for.

Is there a custom function available which can be used for logging errors captured in a sp in a sql table

Is there a custom function available which can be used for logging errors captured in a sp during and after execution in a sql table?
Basically we would like to utilize such function in every sp and log errors of each sp in a error log table
Mudassar

Thanks .
I was able to write this however I am thinking I am missing something
CREATE FUNCTION testfunction1()
RETURNS @temp_error TABLE (
id int identity(1,1),
procedure_name varchar(255),
line_number int,
error_number int,
error_message varchar(max),
error_state int,
error_severity int,
occurence_datetime datetime default current_timestamp,
user_name sysname default suser_name(),
login_name sysname default suser_name()
AS
BEGIN
insert @temp_error(procedure_name,line_number,error_number,error_message,error_state,error_severity)
select error_procedure(),error_line(),error_number(),error_message(),error_state(),error_severity()
RETURN;
END;
CREATE TYPE test_type AS TABLE(
id int identity(1,1),
procedure_name varchar(255),
line_number int,
error_number int,
error_message varchar(max),
error_state int,
error_severity int,
occurence_datetime datetime default current_timestamp,
user_name sysname default suser_name(),
login_name sysname default suser_name()
GO
create proc usp_error_test
@test_type AS test_type READONLY
as
begin
begin try
select 1/0
end try
begin catch
select * from testfunction1(@test_type)
end catch
end
Mudassar

BAPI/Function module for BATCH SPLIT

Hi,
is there a BAPI/Function module to enter BATCH SPLIT data in an outbound delivery. I used tcode VL02N to create an Outbound delivery(FOR an STO). I can use 'BAPI_DELIVERYPROCESSING_EXEC' to creat an Outbound delivery, but need to know what to use to add BATCH SPLIT data.
Thanks
Raj

Hi Raj,
Check this thread..
Re: Inserting Batch Split Items in Delivery
Cheers
VJ

Automatic function on WEB BPS

Hi Everybody,
I created a planning folder, with UPSM. In there I put on Layout a automatic function. (right Button on funtion, then Attribute function and finally check options "..before to change layout". So , I want to convert that to WEB Interface Builder, I Created the same objects, so ..when I want to create a Autommatic functions I don't Find it , just appear a button.
Somebody knows, how can create that??

Hello,
You can attach a FunctionButton to a layout: on the parameter "Function After Data Change" of your planning layout component choose your FunctionButton.
Then on your FunctionButton, select false for the parameter "Visible".
Your function is automatically executed, when data change in the planning layout.
Regards

Automatic functions on WEB BPS

Hi Everybody,
I created a planning folder, with UPSM. In there I put on Layout a automatic function. (right Button on funtion, then Attribute function and finally check options "..before to change layout". So , I want to convert that to WEB Interface Builder, I Created the same objects, so ..when I want to create a Autommatic functions I don't Find it , just appear a button.
Somebody knows, how can create that??

Hi Leticia,
Attaching an automatic function to the Planning folder and executing the planning folder in WIB are two different things.
Once you have attached the Automatic function to the Layout in the folder, you could execute the folder using the SAP GUI interface or the Web interface.
Refer below help link for more details.
http://help.sap.com/saphelp_sem40bw/helpdata/en/72/56cb181184429fb56e43ece18c4b0a/frameset.htm

Camera Raw 8.7.1.311 but it lacks several functions such as "fill-in"...

I have Elements 13, with plug-in Adobe Camera Raw 8.7.1.311, but it lacks several sliders such as "fill light", and lacks 7 of the editing functions such as 'detail'; this is PSE 13 home edition.
Is there a way I can upgrade ACR or Elements to achieve full ACR features?

Sorry fror the blank reply; I am new at this... think I understand now; Following is what I intended to send:
Thanks to Jim Hess and Station_Two for your replies.
     I had previously used PSE 5 (years ago).
Recently, a friend let me try ACR on his computer in order to 'test drive' ACR with some of my photos: he has PhotoShop
I loved Camera Raw (!!!), and assumed that the latest PSE (13) which comes with the ACR plug-in would have the latest Camera Raw version, so I shelled out $139 for PSE 13.
     That's when I found out that the version that comes with Elements 13 is limited in many ways.
     It was suggested that I make a switch within Elements to a pre-2012 version of ACRaw; I do not know how to do that: to change or upgrade ACR within Elements. I see no ACR in my apps listing (I have a new Mac and am running Yosemite), nor any way to upor downgrade outside of Elements.
     Any ideas or sites I could look at?
     This is my first try at getting help via a forum.    Thanks for any advice you can give.
        Jim V

HTML Article Management: Is there an easier way to perform batch updates?

I have a folio with many html articles.
After a batch of edits I need to update the folio via FolioBuilding panel.
I've tried 2 ways both however both are time consuming;
1) via Updates: updating is time consuming because i have to select each artcle, go to menu select update, wait till complete, repeat for each article.
2) via reimport: select each article, go to menu & select delete, wait till complete, repeat for each article then re-import all articles
Is there an easier way to accomplish batch updates?
Thanks,
John

Just use "import" & the sw insts' will load and assign accordingly, automatically.
But oddly, there are times when importing a SMF w/imbedded prgm changes, that LP8 loads a completely wrong instrument to a specific track(s).
One reason that I've kept only one of my trustworthy external midi modules (Roland XV5080), specifically for just importing SMFs'. When the XV is in GM mode, any standard midi files I import to LP8... always load pgm changes correctly 100% of the time.

I need a spreadsheet that allow any advanced functionality such as macros and active x components. Any possibility of that ever happenning?

I have spreadsheets that contain macros. Unless and until software producers change the programming or capability that allow any advanced functionality such as macros and active x components, I cannot use my ipad. So I am forced to lug my laptop and my ipad around when the ipad would be perfect for my work in insurance. The fact that this capability does not exsist in docs to go or numbers means there either is a major hang up or these software manufacturers don't feel the need is strong enough. Either way, it really puts people like me in a bind. Does anyone have a solution for this? Is it really that hard of a thing to do to be able to read and run macros?

Unfortunately there is NONE. I have tried searching for a long time but never succeeded to find an app that can read Macros. I hope there must be a very strong limitation for developers to support macros.

Advanced functionality such as macros and active x components

Currently no app allows for advanced functionality such as macros and active x components on tablets. This seems incredibly crazy to me since tablets allow you to do so much without having to lug your laptop around. What is the reason why iworks, or for that matter, neither does docs to go leaves these features out? Is there hope that these features will be integrated in future versions and in the meantime, is there any program out there that can be purchased that reads and executes macros that were created in excel?

Unfortunately there is NONE. I have tried searching for a long time but never succeeded to find an app that can read Macros. I hope there must be a very strong limitation for developers to support macros.

[svn] 4634: First part of glue code for allowing Halo components to use the new Text Layout Framework , in order to get functionality such as bidirectional text.

Revision: 4634
Author:   [email protected]
Date:     2009-01-22 17:38:56 -0800 (Thu, 22 Jan 2009)
Log Message:
First part of glue code for allowing Halo components to use the new Text Layout Framework, in order to get functionality such as bidirectional text.
Background:
TLF is making this possible by implementing a TLFTextField class. It is a Sprite that uses TLF to implement the same properties and methods as the legacy TextField class in the Player. Thanks to the createInFontContext() bottleneck method in UIComponent, it can be used by a properly-written Halo component (such as those in Flex 3) without any modifications to the component.
Note: Text should render similarly -- but is unlikely to render identically -- when a component uses TLFTextField vs. TextField. The width and height may be different, affecting layout; text could wrap differently; etc. This is a fact-of-life based on the fact that TLF/FTE and TextField are completely different text engines.
Whether a Halo component uses TLF or not to render text will be determined in Flex 4 by a new style, textFieldClass. (Gumbo components always use TLF.)
TLFTextField is currently only partially implemented. It does not yet support scrolling, selection, editing, multiple formats, or htmlText. Therefore it can only be used for simple display text, such as a Button label.
Details:
The TextStyles.as bucket 'o text styles now includes a non-inheriting textFieldClass style. It can be set to either mx.core.UITextField or mx.core.UITLFTextField. These are the Flex framework's wrapper classes around the lower-level classes flash.text.TextField (in the Player) and its TLF-based workalike, flashx.textLayout.controls.TLFTextField.
The global selector in defaults.css currently sets it to mx.core.UITextField using a ClassReference directive. For the time being, all Halo components will continue to use the "real" TextField.
The new UITLFTextField is a copy of UITextField, except that it extends TLFTextField instead of TextField. This class has been added to FrameworkClasses.as because no classes in framework.swc have a dependency on it. It will get soft-linked into applcations via the textFieldClass style.
The TLFTextField class currently lives in a fourth TLF SWC, textLayout_textField.swc. This SWC has been added to various build scripts. The external-library-path for building framework.swc now includes all four TLF SWCs, because UITLFTextField can't be compiled and linked without them. However, since they are external they aren't linked into framework.swc.
Properly-written Halo UIComponents access their text fields only through the IUITextField interface, and they create text fields like this:
textField = IUITextField(createInFontContext(UITextField));
(The reason for using createInFontContext() is to support embedded fonts that are embedded in a different SWF.)
The createInFontContext() method of UIComponent has been modified to use the textFieldClass style to determine whether to create a UITextField or a UITLFTextField.
With these changes, you can now write code like
to get two Buttons, the first of which uses UITextField (because this is the value of textFieldClass in the global selector) and the second of which uses UITLFTextField. They look very similar, which is good!
Currently, both Buttons are being measured by using an offscreen TextField. A subsequent checkin will make components rendering using UITLFTextField measure themselves using an offscreen TLFTextField so that measurement and rendering are consistent.
QE Notes: None
Doc Notes: None
Bugs: None
Reviewer: Deepa
Modified Paths:
    flex/sdk/trunk/asdoc/build.xml
    flex/sdk/trunk/build.xml
    flex/sdk/trunk/frameworks/projects/framework/build.xml
    flex/sdk/trunk/frameworks/projects/framework/defaults.css
    flex/sdk/trunk/frameworks/projects/framework/src/FrameworkClasses.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/metadata/TextStyles.as
Added Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UITLFTextField.as

Many of your points are totally legitimate.
This one, however, is not:
…To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

Is there a automate function such as "batch" in Aperture??

Similar Messages

Maybe you are looking for