Is there a BADi to control the results of SPL check on partner?

Hi,
When a customer / vendor master is transferred from ECC to GTS system, in some scenarios it is getting blocked.
Is there a BADI available using which we can control this result, and keep a particular partner as unblocked?
Thank you,
KM

Hello KM,
what kind of scenarios do you mean?
Are you using positive/negative lists?
Cheers,
Gabriel.

Similar Messages

Is there an app to control the volume of an iPhone 3GS?

I have an iPhone 3GS and the volume keeps going all the way down once I plug the headphones in. Before this started happening the volume would go all the way up. Before that even started happening the phone would repeatedly try to shut itself off and I had to keep pressing Cancel.
I did buy the phone off of eBay used, to try and go on a prepaid contract once my current contract ends. On the case itself, there are some minor scuffs and such, it does look like it was opened at a time. It still works perfectly, except for the volume glitch right now. Is there an app that controls the volume to keep it from going all the way down?. People say in forums and such to tighten the screws on the bottom (which I tried), and to also open the phone and see if there is anything blocking the volume control thing (like dust or anything) but I'm afraid to try that with the risk of causing further damage. What should I try?.

to at least try and fix it if none of that works then replace it through apple

Is there a way to control the number of concurrent SMTP connections on Database Mail?

Las week Rackspace started controlling the number of concurrent SMTP connections and we are now getting the following message when we send as little as 15 messages at a time using Database Mail:
Exception Message: Cannot send mails to mail server. (Service not available, closing transmission channel. The server response was: 4.7.0 smtp13.relay.dfw1a.emailsrvr.com Error: too many connections from IP xxx.xxx.xxx.xxx)
We are using SQL Server 2005 and Windows 2003 and we have been doing this since 2006 with no problems
Is there a way to control the number of concurrent SMTP connections used by Database Mail or the Database Mail external executable DatabaseMail90.exe?

Hi rkohler,
Usually, we can use the Database Mail Configuration Wizard or the Database Mail stored procedures to determine the server name and port number for the Simple Mail Transfer Protocol (SMTP) server . In the SMTP server points, we can set or increase the number
of concurrent connections.
There is similar issue about database email on SQL Server 2005, you can refer to the following post.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/6bb7b600-f025-451b-898b-2caa29c10d4d/only-some-email-gets-sent-successfully-from-spsenddbmail-database-mail-on-sql-server-2005
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Is there any way to control the volume on my Apple TV?

Here's the scenario: I have a small amplifier under my couch that controls the speakers connected to my Apple TV. When I use Airplay from my iPhone to listen to music, I'm able to control the volume right from the music App on my phone- this is perfect because I don't like to reach under the couch to change the volume. However, there are two scenarios when I cannot seem to adjust the volume anywhere except on the amp. These are:
First: Using Airplay while playing a video from my MacBook Pro to the Apple TV. In this case, the volume slider in iTunes suddenly has a little lock icon on it and is unadjustable. Is there any way to unlock the volume?
Second: When using the Apple TV directly to play any media- music or movies. The volume up and down buttons on the Apple TV don't control the volume. I'm forced to reach under the couch to adjust the volume- which happens quite frequently. Is there any way to control the output volume of the Apple TV?
The lack of volume control has been super disappointing. I've been a (multiple) airport express user for years so kind of expected Airplay to work the same for video- with the ability to control the volume from whatever device was transmitting. Can anyone help me?

Andrew- this is how I would expect things to work. However, when I use airplay from my iPhone to say, play a youtube video, the volume on the phone is suddenly rendered useless and I'm forced to adjust the amplifier. When I just play audio from the phone, the volume works.
It's the same on my macbook pro. If I mirror the screen, my computer's volume affects the speakers volume. However, if I am in itunes and play a movie and use airplay for that, I get a lock on the volume. Is this a setting somewhere?

User Exit & BADI for controling the END user in co06

Hi
I HAVE SOME 2 DOUBTS
1. I need a user exit / BADI for controlling the user to edit a specific document type in co06 (BACKORDER PROCESSING) .
the control should be actve for specfic order type for specfic users
2 DEPENDS ON ORDER TYPE I NEED TO CONTROL THE ALLOCATION , AND HOW TO CHECK THE SAFETY STOCK

Answer cannot be Provided properly , so has to Post more questions . i am jus closing my ques??

Is there a way to control the quality of my pdf file when exporting from a .pse file?

Is there a way to control the quality of my pdf file when exporting from a .pse file?
Hi,
I have 2 pages in all in a .PSE file.
When I try to export it as .PDF, the quality is very poor. I cannot change it to a better quality.
Please advise how I can export the file so that i can have better quality.

Rik Ramsay wrote:
To expand a little on what Jongware said, normally choosing vector over bitmap will decrease the filesize. If the vector art is very complex though, this will not be true.
Yup, a logo as bitmap takes up more space than the same as a vector -- unless the vector image is bitmap heavy (think Drop Shadow, Outline Glow; these are actually bitmap effects).
Also, check your PDF version. "Older" versions do not support live transparency, the latest do. Then again, you cannot use live transparency if you suspect your viewers may be using Mac OS X, because Apple's own PDF viewer sucks big time.

Exit or Badi for controlling the change of user status in notification

Hi,
I want to check the current user status of notification while saving the notificaton. If the current user status satisifies particular situation, then the notification should be save else not.
Is there any user exit or Badi which can be used to control the change of user status in notification.
Thanks
SUMIT

Hi Pushpa,
Thanks for the reply.
the problem over here is that the BADi IQS0_STATUS_MAINTAIN only allows to disable the user status.
the other function module STATUS_READ only fetches the data from JEST.
whereas my problem is that i want to check on the changed status on the screen(which is not saved also).
Appreciate your reply on the same.
Thanks
SUMIT

Is there a way to control the "back button"?

i've got a simple animation intro, ending with the very last
key frame being static with links. then the links will bring up
another page in the same window. but i was wondering if there was a
way in flash to control the back button to bring the user to that
very last key-frame, at the end of all the animation. thereby
skipping over the intro-animation.
also:
i have an html intro page, where you can go to the flash
introduction, or the peoples' old website, or to a Flash-Player
download window. i was wondering if there was a way to create a
link to that end key-frame in order to by-pass the animated flash
intro.
thanks for your help

gotoAndPlay(32) if you have a continuos animation after that
frame and you want to continue it; the number within the brackets
is the number of the frame you want to go to. Or else if you want
to go to a particular frame and stop there, gotoAndStop(32);

Is there a way to control the number of consumed messages from JMS?

Hi everyone,
I have a BPEL process that is consumes messages from a foreign queue, performs a transformation, and passes it to Oracle Apps. I'm curious if there is a way to control the number of messages consumed at a time for processing.
For example, if we place 50 transactions on this queue, I would like to only consume 10. And then as each one is processed and passed to Oracle Apps, I would like to pull another transaction off the queue. So basically I would only be processing 10 at the most.
The issue I am having is we put 50 on the queue and the 50 are take off right away. But then half are making it into Oracle Apps and the remainder is failing with a JCA Connection Factory max connection error.
Instead of changing the settings to get more through, I am wondering if it's possible to limit the number being processes at any one time.
Thanks

Hi,
Have a look at the adapter.jms.receive.threads Property for JMS Adapter...
http://docs.oracle.com/cd/E21764_01/core.1111/e10108/adapters.htm#BABCGCEC
Cheers,
Vlad

Is there a way to control the Magic Trackpad scrolling speed?

I just got the new magic Trackpad.
I am finding the speed of scrolling in window to be quite fast such that I it goes to far. Is there anyway to control the speed of it so it does not go to fast?
Thanks and I look forward to your reply.

I haven't received my MTP yet but if it works like the trackpad on my MBP you just don't flick your finger so fast. The speed is governed by how quickly you move your finger across the surface which is something I find very cool because it puts me in total control.
Regards,
Roger

Is there a way to get the result of using multiple blending modes in one object?

Hello,
I wonder if there's a way to merge multiple objects with blending modes to one object. Here is the example:
On the left rhere are three objects with the same appearence but different blending modes(color dodge, normal, overlay), on the right they are overlapped, which are still three object. I'm looking for the way to have the same result as the right overlapped one, but as one object. Having the same multiple objects only for the result of color blending mode uses too much memory for my computer.
Thank you for your help in advance.

create one object: then in your appearance panel, duplicate the fill twice. Select the top fill and expand the sub menu, click on opacity, choose blending mode. repeat.
G

Is there a way to control the size of the pictures taken by iPhone?

The photos taken by iPhone are fairly large photos and require quite a bit of time for transfering when taking hundreds of photos. Is there any settings in iPhone that can control the size of the pictures being taken? Thanks

Sorry, no. You might try looking in the App store for a third-party app that provides this functionality, but such is not natively built into the iPhone.

Stop Query if it does not match with Condtions & Control the result count

Dear All,
I have requirement in my Environment, I have to stop the Queries which compromises these conditions
1. If Query is running more than specified threshold (if it running more than 2 mins).
2. If Query is fetching huge data (rows more than 1000 for example)
Please note we have done enough study on resource governor, it works on compile time, we need to control the queries during run time. Also resource governor does not restrict the resources if they are free.
Answers are appreciated.

Hello,
I would not advise you to do such things in your environment.2 mins is very less time how could you be so sure a 2 min query is bad. And your second point is totally baseless it wouldtake a query a fraction of secondto read 1000 rows.My answer would be please
dont implement.
If you want to test below query might achieve the first requirement, I have not tested it please treat this query as hint and optimize or add anything if required.
If you schedule this query through agent for every 2 mins or 5 mins .It can achieve.But some query takes more time to rollback than to finish scheduling this would lead to unstable environment
USE MASTER
IF EXISTS (SELECT * FROM TEMPDB.SYS.ALL_OBJECTS WHERE NAME LIKE '#KILL_CONNECTION')
BEGIN
DROP TABLE #KILL_CONNECTION
END
CREATE TABLE #KILL_CONNECTION
SESSION_ID INT
,TOTAL_ELAPSED_TIME BIGINT
,START_TIME DATETIME
INSERT INTO #KILL_CONNECTION
SELECT
SESSION_ID
,TOTAL_ELAPSED_TIME
,START_TIME
FROM SYS.DM_EXEC_REQUESTS
WHERE TOTAL_ELAPSED_TIME > 7200 AND SESSION_ID > 50
DECLARE @SESSION_ID BIGINT
DECLARE @CMD VARCHAR(1000)
DECLARE KILL_CONNECTION CURSOR FOR
SELECT SESSION_ID
FROM #KILL_CONNECTION
OPEN KILL_CONNECTION
FETCH NEXT FROM KILL_CONNECTION INTO @SESSION_ID
WHILE @@FETCH_STATUS = 0
BEGIN
SET @CMD = 'KILL ' + @SESSION_ID
EXECUTE (@CMD)
END
CLOSE KILL_CONNECTION
DEALLOCATE KILL_CONNECTION godrop table #Kill_connection
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

FCPX: When applying the keyer to green screen, is there a way to change the resulting color from black to another color (cream, blue, etc)?

Currently working on a project where I shot various video tributes in front of a green screen. When using the keyer in FCPX, the resulting image is represented by a black background instead of a green one. I'd like to change that color to blue, tan or something else so that when I apply a picture in a portion of the background, the remaining background looks fine. More specifically, I plan to put images over the right shoulder of each person in the video. The image will only take up about 1/4 of the background and the rest of it currently just looks like a black screen. Thanks in advance for any advice.

Tom now I have another follow-up. So i have the original green screen with the keyer applied which, emptied the background. Now I've applied a color generator below that in the timeline and it generates a color. How do I now go back and add the photo in the upper right corner of the clip? Ultimatly the goal is to have the subject, with the color backdrop and a photo above their right shoulder.

There is a difference between the results from labwindows and VS

hello,
I use the same procedure to process the same data respectively by Labwindows/CVI and vs, and got two differents rusults, how does this happen?
Attached both Labwindows/CVI and C++program. Read data from "JFfg5.txt" and output the results to the "out.txt".
Attachments:
读入.cpp ‏4 KB
f.c ‏5 KB
JFfg5.txt ‏801 KB

Hi Séverine,
Do you find any additional code added to SBO_SP_Transaction stored procedure. A similar issue with stock transfer fixed in later patch. Please test in latest patch.
Regards,
Vijay kumar
SAP Business One Forums Team

Is there a BADi to control the results of SPL check on partner?

Similar Messages

Maybe you are looking for