Is there a better way to deal with Edge Animate CC's library management?

I haven't been using Edge Animate CC for very long, but I already have a huge list of complaints. Although I could go into detail about features that seem to be missing from my version of Edge (just a quick example, all of the tutorials I've seen have a quick code insert feature on the right side of the code dialog box that my version doesn't seem to have, or even have the option for turning on), right now I want to focus on Edge's HORRENDOUS LIBRARY MANAGEMENT.
So I created the following animation which I have put into an iframe:
The issue I had on the first draft of this project was that I (perhaps naively) thought that there would be an option to actually re-size the pictures on export. There wasn't, and so my original version was really, really large, took way too long to load, and needed to be updated. For the second version, I reduced the size of the pictures and made them JPEG files (some of the originals were - quite unnecessarily - large PNG files) and reduced the quality so that they were all under 10KB. Of course, I had to rename the files and re-import them to Edge's library. This is where my problems started.
You see, edge will put the files into a folder marked "images" when you publish them in a folder, so I just assumed (NOT UNREASONABLY) that the resulting animation would pull from the images folder. It worked fine in the preview, so I pushed it via FTP, only to find that all of the original files (which were not in the new animation) were pushed to the new "images" folder. The only library management that you get in Edge is apparently looking for the file in the folder you designate as the "Library" folder, so deleting these images out of the "Images" folder makes not one bit of difference. That should have been my first clue that something was rotten in Denmark, to use a Shakespearean metaphor. After removing these files and publishing my banner again, suddenly the new images weren't showing up. They were clearly in the "images" folder on the FTP server, but they weren't showing up in the animation. So I inspected the banner on the site, only to find that rather than point to the images folder, they are in fact pointing to the library folder. WHY DO THE PUBLISHED IMAGES POINT TO THE "LIBRARY" FOLDER THEY WERE PULLED FROM INSTEAD OF THE "IMAGES" FOLDER THAT THEY'RE PUBLISHED TO? I added a new file tree that mimicked the folder structure and put the images in a mock "library folder" and now the animation works again.
The library management in this program is just plain awful (I can't stress this enough), making it a chore for experienced users and a red-hot rage-keyboard-pounding mess for everyone else. And the worst part, there doesn't seem to be any explanation from Adobe on why it is this way.
I am really not looking forward to the next time I have to use this program at work.

I'm not sure that's any easier. It would be nice if Edge gave you a(n obvious) way to re-link files, but it even fails in that respect.
What would be better is if I could just point Edge to my FTP site and put the library on there. It would solve so many problems... failing that though, some sort of library management option set needs to be implemented in this software. I try to practice appropriate file management, but I hate having to be punished with an extra twenty minutes of work for one little mistake.

Similar Messages

Is there a better way to deal with Verizon and my DSL issues?

My family and I have been with Verizon for as long as we've had broadband internet. For the past 5 years or so the internet has been shaky at best. For the most part it works, but a coupe times a year it stops working all together or becomes VERY intermittent (and is usually working by the time I get finished sitting on hold and the test the technician runs shows no problems). Every time I have to wrestle with the "tech support" on the phone and listen to a recording tell me the same things over and over again that never fix my problems.
Every time my internet gets to this point, it requires a visit from a Verizon technician. Usually they go out into the neighborhood and find a length of cable and replace it. Usually that fixes my issues for a while, but I know it will happen again. It always happens again. It seems to me that the entire length of line that my internet runs through is old, and needs to be replaced. Instead of fixing the problem before it actually becomes a problem, Verizon continues to leave me and my family without service for periods of time.
Last week was the most recent time we dealt with this situation, which was fortunately short lived (Only all day Sunday, into Monday when the technician arrived). It's getting VERY tiring dealing with this situation over and over again, and it's getting offensive honestly. To hear the tech support person tell me that I will be charged $91 if the problem is found and is inside my house is ridiculous. I would understand if this was the first time this situation had occurred, or if I frequently reported non-issues. But no, I'm simply reporting the same issue that Verizon has failed to fix MANY times before.
Perhaps the most frustrating part of this, is that we've never been compensated for our lost service. Last year we lost service for an entire week. That's an entire week with no internet service at all. After we finally got it back, we spoke with the billing department and they told us that we would be credited for the week we lost service. At this point, we are yet to see any credit for the time we have been without the service we pay for. Perhaps we would have tried dealing with Verizon again to get our weeks credit, but attempting to contact someone in Verizon seems futile. Unless you're calling sales you end up sitting on hold for extended periods of time, only to be bounced from person to person until you get to someone that has no excuse not to pretend to help you.
Unless something changes, this is Verizon's last opportunity to keep our service. We have dealt with the loss of service followed by the insult of attempting to deal with Verizon's customer support for the last time. Next time it happens (and I'm sure there will be a next time) unless Verizon shows us that they are actually going to correct the problem, we will cancel our service and give our business to the competitor. This post is being written for a few reasons. I'm hoping that perhaps Verizon can give me a better way to contact someone locally when we have a problem (I would LOVE to speak with a regional manager, or even a local manager of some sort), or at least recognize that there is a problem that will end up costing them money.
Thank you,
A long time customer.

I've decided to give up the fight and go to another provider. I have work to do and having to wait at speeds slower than dial up is insane. At least with dial up I'd have some stability. I can't even run speedtest because it won't connect. At hotels, wi-fi, and hanging by blackberry the laptop works fine but to actually use dsl, nope. Multiple machines and multiple browsers - it's all the same worthless bandwidth.
If they won't give you fios then there is no reason to stay. They've been promising me the service is coming for the last 6 years. They could have run it here by now for the postage they've spent trying to get me to switch to it even though it isn't available. Waste, waste, waste ....

I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..

I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..does App "Numbers" help here?

Numbers should be able to read Excel files without any problems. If Numbers does not read the graphics properly then you can try Excel Online. https://office.live.com/start/Excel.aspx

A better way to deal with lost hyperlinks when converting Robohelp to Printed doc?

I have inherited a 750-page manual that is
"single-sourced" in RoboHelp X5. When I generate printed
documentation, all of my hyperlinks and converted to plain text.
Everytime we release a new version of the manual with any changes,
we have to re-generate, and then manually go into the MS-Word
converted document and re-create some 350 hyperlinks and page
number references. Somebody please tell me that there is a better
way to do this, or a better tool to manage single-source
documentation.

Another post has been raised relating to this problem. See
http://tinyurl.com/yvpaut
I am replying here is this is where most of the relevant
information is.
You found that using the Style Mapping template solved the
images problem but the document stopped generating at 450 pages.
That was sort of what I hoped for. Rather than go to the step I
will suggest in a moment, I suggested you try something else but
you never came back to the forum to indicate you had tried it, so
the assumption is you did and it worked. Patently it did not so
let's try what I would have suggested next.
On my website there is a topic on Print Issues and one of the
them covers Malformed Topics. Try looking for <p
style="mso-bookmark: as suggested in my earlier reply in this
thread. You can try RH's Multi file find and replace but FAR from
http://www.helpware.net/FAR
may get better results. I think with this error you usually get a
message. Do you have the Output pane opened and have you read right
through it for clues? View | Output on the menu. Whether or not the
Output pane mentions this error, I would search for it anyway.
Other Points:
A] It could still be a resource problem. The document is very
large so, as Harvey mentioned, resources come into it. I know the
PCs that won't play nicely have good resources but whilst I am no
expert in this area, don't foget XP is using more of them leaving
less available to you. It could be an issue but I am inclined
towards it being something else.
B] I also suggested a hunt for a rogue topic.
"What I would try is copying your layout so that you have
three versions of it. Then delete two thirds from each one. If all
three work fine, it sort of confirms that size is a problem. If one
fails, your on the track of the rogue topic."
Did you try that? Like I said, if all three work fine, then
we are back with the resource problem but we will have ruled out
other issues. It should take less than fifteen minutes to set that
up. Longer to run it but you can be doing something else at that
point.
C] On FrameMaker, no real answer but you will soon see
evidence that Adobe are continuing to better integrate all the
products we are using. I don't think you will see what you want in
the upcoming version though.
NEXT:
1] Please search for <p style="mso-bookmark:
2] If that fails, try creating the three layouts.
3] Then post back how it went. If unsuccessful, tell us if
the Output pane gave any information about things the process did
not like.
Let us know either way as if one succeeds and you post that,
it helps the next person with the same problem.

Is there any clever way to deal with google auto-awesome pictures?

I'm testing out Lightroom to try to consolidate all my photos from the various sources, phones, cameras, etc.
This includes importing all my Google photos pictures that were uploaded by my and my wife's phones. Google did there nice stuff for me automatically and created a bunch of "Auto-Awesome" pictures. which are named with the same name as the original with "-edited' appended.
What I'd really like is to import these as copies of the the original master. So if I have the files 10-10-2014 14.55.20.jpg and 10-10-2014 14.55.20-editied.jpg, I'd like the first file to be the master and the second to be a physical virtual copy (my understanding is that virtual copies can be both virtual and physical). At the very least it would be nice to stack them.
Any clever ideas? I've been looking at the Lightroom API to see if I could code something to do this for me, but it seems that the api is pretty restrictive (disappointingly).
Thanks.

If the files are in a folder on the hard drive or external hard drive simply import and select all in the import dialog.
Use Import >> Add
If it's a folder that gets added to regularly, it's possible to set it up for auto-import into LR. See this link:
http://helpx.adobe.com/lightroom/help/import-photos-automatically.html

Is there a better way to do this with Flash?

I am new to Flash but am slowly teaching myself via Lynda.com etc
I have an image that I have added to a website via a content management system and want to make certain areas of that image into links to other sites.
I found this page that does the kind of thing I want to do, but it appears from looking at the source code that the person who has done this has cut the image up into several sections in order to fit it into a table: http://www3.imperial.ac.uk/staffdevelopment/postdocs1/guidance
Is there a better way to achieve the same kind of effect using Flash by making ares of an image into links and keeping the image as a whole?

There are ways to keep the image whole and have portions of it linking to different places both in HTML and in Flash. In HTML you can use an image map. In Flash, you can just lay invisible buttons atop the image and use those to link.

What's the best way to deal with floating point errors?

What's the best way to deal with the decimal number errors in Flex?
Lets say I have:
var number1:Number = 1.1;
var number2:Number = 1;
var result:Number = number1 - number2;
trace(result);
I get "0.10000000000000009".
What's the best way to deal with this so that i get the right result?
Using the trick: result = Math.round( result * Math.pow(10,13) ) / Math.pow(10,13); is not useful as such when using big numbers.
For example, If number1 = 100000000001.1, and number2 = 0.2, I get "100000000000.90001" as result. The previous rounding fixes rounding errors after 13th decimal, but here the first rounding errors come after 4 digits.
The toPrecision method in Number and NumberFormatter dont seem be of use by themselves because of the same reason.
So I'd have to check how big the number is, and then round the number based on that.
So far I've constructed a method that does that with logarithms like this:
public function floatFix(number:Number):Number{
      var precision:int = 14-Math.floor(Math.log(Math.abs(number))*Math.LOG10E);
      var precisionFactor:Number = Math.pow(10, precision);
      return Math.round(Number(number*precisionFactor))/precisionFactor;
It just seems rather odd that one would have to create and use something like that to just count 1.1-1; There's a lot of calculating in that method, and i'm guessing that having to use that in a loop could slow down a program quite a bit.
I think there really should be a pre-built method in flex for something like this, but I can't find any.
Anyone know any better/faster ways?

Use the application server database pooling services to create a datasource that can be access using JNDI.
Move the database access code to a Servlet so that a JSP submits a form to the Servlet that does the database access and packages the data into a bean which is passed to another JSP to be displayed.

A different way to deal with "unknown" user after upgrade from Tiger.

It's a known issue that doing upgrade and install or archive and install from Tiger to Leopard, produces a lot of folders with "unknown" group in their "get info" panel. This has to do with a different group structure in Tiger and Leopard.
In Tiger, every user has their own private group with the same name as the username. That group is set to be user's primary group.
In leopard, every new user with an account is a member of the group staff (gid=20) which is not present in Tiger. Leopard doesn't fully understand Tiger's private group structure, hence the "unknown" group. This causes various problems such as Finder crashes when trying to change the permissions and ownership in the get info window.
Apple's proposed way of dealing with this is described [here|http://docs.info.apple.com/article.html?artnum=307128].
However, this method doesn't change the existing group structure and doesn't resolve all the problems.
I'd like to suggest a different way of dealing with it.
1. create a new admin user (if you don't have one already), log out of your primary account and log into the new one.
2. enter the following in terminal:
*sudo dscl . delete /users/"username"*
where username is the short name of the user on the main account (not the one you are currently logged into).
This will delete that user.
3. Log out/in.
4. go to system preferences->accounts and create a new user with the name and short name exactly as the one you've deleted in step 2.
You'll be get a popup saying that a home directory by this name already exists and asking if you want to use it. Say "Yes".
That's it. Your main user will be recreated using the native group structure of Leopard with gid=20(staff). Permissions on your home directory will be reset with correct group and ownership.
I tested the process on my powerbook after an upgrade and install from Tiger to leopard and it worked without a hitch.
I like this method better than Apple's because it completely gets rid of Tiger's group structure which was creating all the confusion. The only downside as far as I can see is that you might have to manually change the group ownership on some files belonging to the main user that sit outside your home directory.
I would appreciate any comments on this.

hmm, I confess, I did this before installing 10.5.2 so i can't say for sure. However, I've dealt with a few people (see e.g. this [thread|http://discussions.apple.com/thread.jspa?messageID=7012957]) who are running 10.5.2 and still have this issue. I don't know what if anything 10.5.2 did about this but I'm quite sure that it didn't change the group structure inherited from Tiger.
Message was edited by: V.K.

How is the best way to deal with duplicate photos

I am using a new retina 27" iMac 16gb ram OS X 10.10.1
Aperture 3.6
What is the best way to deal with duplicates that get in Aperture Vaults
I have used Gemini and it finds duplicates, but I have no way of telling if the original are still there.
I don't want to go through 15000 photos to try to find the duplicate.
Thanks Charlie

You mean - one image in a vault, one in a library? Or duplicates in the same library?
Photo Sweeper can scan several libraries or folders at the same time and display the duplicates side by side to let you pick which to keep. You can define rules to mark photos for automatic deletion as well.
http://overmacs.com/photosweeper.html

Is There a Better Way to Work in the Marker List Window?

Is there a better way to sequentially listen to phrases one-by-one in the Marker List window? What I'm doing is Auto-Marking one single long file to break out 271 bits and save each as their own file. It's WAY faster than copying and pasting bits into new files and "saving as" 217 times.
BUT, after Auto-Marking, I have 300-400 phrases to listen to, deleting the non-keepers as I go, until I'm left with my "keeper" 271 marked phrases. But it's so tedious to move from phrase-to-phase. I have to double-click each one before I can hear it (you can move the cursor with the down-arrow, but it won't actually select the audio). So I have to use the mouse (unless I'm missing something) and double-click each of the hundreds of phrases. Then whenever I delete one (which I'll have to do about a hundred times or more to get rid of bad takes, alternates, etc.), inexplicably the cursor jumps way up the list so you have to scroll back down dozens of files to get to where you were. It took me 35 minutes to do it this last time.
Contrast that with Reaper's audition/preview functionality (which, ironically, AA has also, but only for files already saved into a folder). Once I had all the files saved into a folder, I QC'd all 217 files in Reaper and MAN what a difference! All I had to do was use the "down" arrow to advance to the next file AND have it play automatically (Audition can do the same thing with the "Open File" feature). It literally took me 5 minutes to check all 217 files that way. If AA could add that kind of functionality to the Marker List window, or if I'm just completely missing something (very possible) I would REALLY be happy.
Any ideas?
Thanks again! Happy New Years again!
Ken

Wild Duck,
That doesn't quite do what I need. My end-product is 271 (used to be 116) separate files created from one large file. That large one is made up of WAY more than 271 (the VO actor records different versions of some commands, makes mistakes, etc.).
So I need the ability to listen to each marker, and then be able to delete it if need be.
The Playlist makes this impossible in two ways. It only has 2 options for hearing each marker, and neither option allows me to delete that marker after I've heard it. It either plays them all back-to-back without stopping, or it plays each as you click the "Move Down" button. That last one would be great if showed me which marker was playing! But it doesn't, so there is no way for me to know which marker number I just heard, nor can I delete that marker after I hear it.
Sigh.
Thanks for the tip though:).
Ken

Is there a better way to do this projection/aggregate query?

Hi,
Summary:
Can anyone offer advice on how best to use JDO to perform
projection/aggregate queries? Is there a better way of doing what is
described below?
Details:
The web application I'm developing includes a GUI for ad-hoc reports on
JDO's. Unlike 3rd party tools that go straight to the database we can
implement business rules that restrict access to objects (by adding extra
predicates) and provide extra calculated fields (by adding extra get methods
to our JDO's - no expression language yet). We're pleased with the results
so far.
Now I want to make it produce reports with aggregates and projections
without instantiating JDO instances. Here is an example of the sort of thing
I want it to be capable of doing:
Each asset has one associated t.description and zero or one associated
d.description.
For every distinct combination of t.description and d.description (skip
those for which there are no assets)
calculate some aggregates over all the assets with these values.
and here it is in SQL:
select t.description type, d.description description, count(*) count,
sum(a.purch_price) sumPurchPrice
from assets a
left outer join asset_descriptions d
on a.adesc_no = d.adesc_no,
asset_types t
where a.atype_no = t.atype_no
group by t.description, d.description
order by t.description, d.description
it takes <100ms to produce 5300 rows from 83000 assets.
The nearest I have managed with JDO is (pseodo code):
perform projection query to get t.description, d.description for every asset
loop on results
if this is first time we've had this combination of t.description,
d.description
perform aggregate query to get aggregates for this combination
The java code is below. It takes about 16000ms (with debug/trace logging
off, c.f. 100ms for SQL).
If the inner query is commented out it takes about 1600ms (so the inner
query is responsible for 9/10ths of the elapsed time).
Timings exclude startup overheads like PersistenceManagerFactory creation
and checking the meta data against the database (by looping 5 times and
averaging only the last 4) but include PersistenceManager creation (which
happens inside the loop).
It would be too big a job for us to directly generate SQL from our generic
ad-hoc report GUI, so that is not really an option.
KodoQuery q1 = (KodoQuery) pm.newQuery(Asset.class);
q1.setResult(
"assetType.description, assetDescription.description");
q1.setOrdering(
"assetType.description ascending,
assetDescription.description ascending");
KodoQuery q2 = (KodoQuery) pm.newQuery(Asset.class);
q2.setResult("count(purchPrice), sum(purchPrice)");
q2.declareParameters(
"String myAssetType, String myAssetDescription");
q2.setFilter(
"assetType.description == myAssetType &&
assetDescription.description == myAssetDescription");
q2.compile();
Collection results = (Collection) q1.execute();
Set distinct = new HashSet();
for (Iterator i = results.iterator(); i.hasNext();) {
Object[] cols = (Object[]) i.next();
String assetType = (String) cols[0];
String assetDescription = (String) cols[1];
String type_description =
assetDescription != null
? assetType + "~" + assetDescription
: assetType;
if (distinct.add(type_description)) {
Object[] cols2 =
(Object[]) q2.execute(assetType,
assetDescription);
// System.out.println(
// "type "
// + assetType
// + ", description "
// + assetDescription
// + ", count "
// + cols2[0]
// + ", sum "
// + cols2[1]);
q2.closeAll();
q1.closeAll();

Neil,
It sounds like the problem that you're running into is that Kodo doesn't
yet support the JDO2 grouping constructs, so you're doing your own
grouping in the Java code. Is that accurate?
We do plan on adding direct grouping support to our aggregate/projection
capabilities in the near future, but as you've noticed, those
capabilities are not there yet.
-Patrick
Neil Bacon wrote:
Hi,
Summary:
Can anyone offer advice on how best to use JDO to perform
projection/aggregate queries? Is there a better way of doing what is
described below?
Details:
The web application I'm developing includes a GUI for ad-hoc reports on
JDO's. Unlike 3rd party tools that go straight to the database we can
implement business rules that restrict access to objects (by adding extra
predicates) and provide extra calculated fields (by adding extra get methods
to our JDO's - no expression language yet). We're pleased with the results
so far.
Now I want to make it produce reports with aggregates and projections
without instantiating JDO instances. Here is an example of the sort of thing
I want it to be capable of doing:
Each asset has one associated t.description and zero or one associated
d.description.
For every distinct combination of t.description and d.description (skip
those for which there are no assets)
calculate some aggregates over all the assets with these values.
and here it is in SQL:
select t.description type, d.description description, count(*) count,
sum(a.purch_price) sumPurchPrice
from assets a
left outer join asset_descriptions d
on a.adesc_no = d.adesc_no,
asset_types t
where a.atype_no = t.atype_no
group by t.description, d.description
order by t.description, d.description
it takes <100ms to produce 5300 rows from 83000 assets.
The nearest I have managed with JDO is (pseodo code):
perform projection query to get t.description, d.description for every asset
loop on results
if this is first time we've had this combination of t.description,
d.description
perform aggregate query to get aggregates for this combination
The java code is below. It takes about 16000ms (with debug/trace logging
off, c.f. 100ms for SQL).
If the inner query is commented out it takes about 1600ms (so the inner
query is responsible for 9/10ths of the elapsed time).
Timings exclude startup overheads like PersistenceManagerFactory creation
and checking the meta data against the database (by looping 5 times and
averaging only the last 4) but include PersistenceManager creation (which
happens inside the loop).
It would be too big a job for us to directly generate SQL from our generic
ad-hoc report GUI, so that is not really an option.
KodoQuery q1 = (KodoQuery) pm.newQuery(Asset.class);
q1.setResult(
"assetType.description, assetDescription.description");
q1.setOrdering(
"assetType.description ascending,
assetDescription.description ascending");
KodoQuery q2 = (KodoQuery) pm.newQuery(Asset.class);
q2.setResult("count(purchPrice), sum(purchPrice)");
q2.declareParameters(
"String myAssetType, String myAssetDescription");
q2.setFilter(
"assetType.description == myAssetType &&
assetDescription.description == myAssetDescription");
q2.compile();
Collection results = (Collection) q1.execute();
Set distinct = new HashSet();
for (Iterator i = results.iterator(); i.hasNext();) {
Object[] cols = (Object[]) i.next();
String assetType = (String) cols[0];
String assetDescription = (String) cols[1];
String type_description =
assetDescription != null
? assetType + "~" + assetDescription
: assetType;
if (distinct.add(type_description)) {
Object[] cols2 =
(Object[]) q2.execute(assetType,
assetDescription);
// System.out.println(
// "type "
// + assetType
// + ", description "
// + assetDescription
// + ", count "
// + cols2[0]
// + ", sum "
// + cols2[1]);
q2.closeAll();
q1.closeAll();

When I share a file to YouTube, where does the output file live? I want also to make a DVD. And is this a best practice or is there a better way?

I want also to make a DVD, but can't see where the .mov files are.
And is this a best practice or is there a better way to do this, such as with a master file?
thanks,
/john

I would export to a file saved on your drive as h.264, same frame size. Then import that into youtube.
I have never used FCP X to make a DVD but I assume that it will build the needed vob mpeg 2 source material for the disk.
I used to use Toast & IDVD. Toast is great.
To "see" the files created by FCP 10.1.1 for YouTube, rt. (control) click on the Library Icon in your Movies/show package contents/"project"/share.

Hi, I had to re install my itunes library from a hard drive to my new laptop. Now I cant sync my iphone because itunes thinks all songs are new and basically doubling all albums. Should i restore iphone or is there a better way?

hi, i had to re install my itunes library from a hard drive to my new laptop. Now itunes thinks i am trying to add new albums and saying there isnt enoug space. should i restore or is there a better way.

Have you tried exporting a 10 second section of the footage to see if the issue shows up once the seqeunce is actually exported from the timeline. I edit on CS5 with windows 7 pro at work quite often and have no issues so I assure you that isn't the issue. I also edit with AVCHD footage when at home and work quite freqeuntly as well so I'm positive that isn't the issue. It sounds like a GPU driver has been corrupted in the way it interacts with premiere pro. What type of GPU do you have? If it supports MPE's GPU acceleration have you tried turning it off and seeing if that makes any difference?
Anyways though try to export a 10 second test section of your timeline to see if when the clip is exported from premiere it will play normally in windows media player or vlc or w/e media player you want to use. If it exports fine then you can almost be positive it's a corrupted video card driver. If that's the case I'd re-install your GPU's driver and also check your gpu makers website to see if they have a updated driver avaiable.

Best way to deal with Mutating table exception with Row Level Triggers

Hello,
It seems to be that the best way to deal with Mutating Table exception(s) is to have to put all the trigger code in a package & use it in conjunction with a Statement level trigger .
This sounds quite cumbersome to me . I wonder is there any alternative to dealing with Mutating table exceptions ?
With Regards

AskTom has a good article about this,
http://asktom.oracle.com/tkyte/Mutate/index.html

Best Way To Deal With Photos?

I need to create a disc of photos that I have taken over the past two years. I have about 800 - 1000 pictures. I began making a PowerPoint with them, but after I put in about 160 slides, each containing one picture, it freezes. This happened on my computer and on my daughter's Mac laptop. I ditched my first attempt with PP and tried again, only to have to same thing happen. So I thought I'd use iMovie, but I'm having trouble accessing them from the Media/Photos panel. I have the pics saved in a folder on my desktop, but iMovie doesn't recognize my desktop...it wants to pull the pics from iPhoto. I don't want to import the pics into iPhoto because they're already in there, just not edited like the ones in the folder on my desktop. AND the ones on my desktop are all sorted by event; the pics in the Media/Photos panel on iMovie are all jumbled together. Is there a better way to make a simple disc of pictures that will play like a slide show? I tried burning them onto a disc to begin with (I had to use a blank DVD cause that many pics won't fit on a CD), but I had to open each picture file independently using Preview. Any suggestions???

OK, since I last posted, here's what I've done...
In iMovie 08 (which I never use because I really don't want to learn anything new - I like iMovie HD and will stick with it) I managed to put the photos into a "movie" that is about 2 hours long (each photo shows on the screen for 4 sec. with a 1 sec. transition before and after it). Then I decided to add music, so I bought songs from iTunes and added them. Now I'm trying to burn it all to a DVD that will play on a computer where I work, which uses Windows as their OS. I can't figure out how to burn to a DVD, though. I tried opening the movie with iDVD, but it wasn't even an option. The movie title was grayed out so I couldn't select it. Now I'm exporting it to my desktop, where I can hopefully do more with it. Any suggestions on how to get this onto a DVD?
Thanks again.

Is there a better way to deal with Edge Animate CC's library management?

Similar Messages

Maybe you are looking for