Is there a bug in the score layout drop-down?

I have a project with 6 software instrument tracks, each track is one region. When I select all tracks and try using the score editors drop down Layout option"create score from selection" I never get the top most track in the score.. I have tried creating a new score set but it still leaves the top track out of the score. There are no hidden or muted regions and no MIDI data tracks. I am still in OS10.5.8 because I am watching other forums to see if pro users are moving up and all I see are big problems with 10.6, I may do what they are doing and change my MBP to 10.6 then 10.7 and see what works, but my main work is done on the iMac so I need to figure this out. Any help would be greatly appreciated. This happens also when I choose "All Instruments" score set-shouldn't that default show all the tracks?

Thanks christiano and Jim, but that causes my 9.1.1 to change the position, length and pitch of 90% of the regions' notes. I have been repeating the same copy paste commands for 4 hours and now they seem slowly to begin to work[Jobs has left the building]. I did try before my original post the option dragging in the Arrange but as I wrote it causes too many mistakes, unless there are only a simple repeated series of a single note-THEN it decides to work.
Any other ideas would be interesting but Apple should get the copy paste in the score going too.

Similar Messages

When my iPod Touch is connected to my Mac, and I select Update to update the software of my iPod Touch, I get a message saying that my iTunes software is current, but it will not update my iPod Touch software. Is there a bug in the iPod program?

When my iPod Touch is connected to my Mac, and I select Update to update the software of my iPod Touch, I get a message saying that my iTunes software is current, but it will not update my iPod Touch software. Is there a bug in the iPod program?

If you have the first gen ipod touch as your information shows, then you would have to buy a software update:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

My JPEGS are no longer being copied over to Finder. Only a random fraction are copied. It use to work perfect. Is there a bug in the updated versions of iPhoto?

My JPEGS are no longer being copied over to Finder. Only a random fraction are copied. It use to work perfect. I can move them 4 or 5 at a time, but it is very time consuming. Is there a bug in the updated versions of iPhoto?

OK - here is what I've done in the past. As I want to be able to save my photos on a DVD that can be read by both a PC and a Mac, I am burning them in Finder. I start by downloading into IPhoto. I'll flag and edit the ones I want to print or post to the web. After that I want to take all the keepers and move them from IPhoto to various files I create in the document section of Finder. I've done it both ways in the past, copy and paste or just drag over, all the files would transfer over. Now there may be dozens of pictures that do not move over - very random, in one case there were only 6 photos and the 3 vertical ones did not copy over.
I'm wondering if this is a software issue or if there is just too much data being moved around. FYI there are 2 Nikon cameras I use and the files from both do this.
Thanks

Is there a bug in the new photoshop CS6 13.0.1.1 update? (Mac OS 10.7.5)

Since installing the latest update of photoshop CS6 13.0.1.1, (Mac OS 10.7.5, iMac late 2009) I have noticed the following problems: when I double click on the panels bar, the panel does not collapse, I have to right click on the bar to get the panel to collapse. Withe the curves adjustment layer, command clicking on the image does not register the point on the curve and command shift click will not set a point on the curves. this is all happening since the upgrade. Is it me or is there a bug in the update?
Thanks in advance

Thanks M, you're right, I do have 13.0.1, it's just for some reason ive noticed some strange behavior in photoshop, can't figure out why. I still can't get my panels to collapse when double clicking the bar and the curves adjustment layer doesn't allow me to place a point using the eyedropper tool when clicking on the image, this has just recently started after reinstalling photoshop on my imac using the creative cloud application manager

Is there a bug in the as3 tween class

Is there a bug in the as3 tween class that causes tweens to stop before completing. I read that there is and that a 3rd party tween class should be used. I'm just starting out learning as3 and experimenting but this would be good to know when I move onto more complex projects.
Also the solution for this was to make your function global. Does this simply mean place your function in the top level of your movie.
I have done research on this topic but I found many conflicting answers.
Any assistance is welcome thanks in advance.

the tween declaration (if you need one) must be placed within the scope of the function. so, if the below function f() is defined in a movieclip, you can use any of the 3 (but don't use the last):
///////// most common use ////////////////////////////////////////
var t:Tween;
function f(){
t=new Tween(...)
/////// next most common use /////////////////////////////////////////
//no declaration needed because the tween is not referenced anywhere outside the function so need not be assigned a variable
function f(){
new Tween(...)
/////////// least common, not good coding, but possible ////////////
// var t:Tween; // declared on the root timeline, for example
function f(){
MovieClip(root).t=new Tween(...)
p.s. please mark correct/helpful answers

Is there a bug in the latest iOS7 operating system update

is there a bug in the latest iOS7 operating system update

iOS 7 and System 7 are not the same. System 7 refers to the operating system on Macs from 1991 to 1996.
I've requested this thread be moved.

Is there any suggestion to the html layout of my blog?

is there any suggestion to the html layout of my blog?
copaslirik
Thanks before

Hi Doku,
Can you be more specific about the kind of feedback you are looking for : Are you looking for feedback on the aesthetic appeal of your blog or any potential technical glitches?
Thanks,
Preran

How do I get a URL to display in the Awesome Bar drop down list? Some URL's appear in this drop down but I can't figure how they got there.

There is a drop down list from the Awesome Bar containing some of my most frequently visited sites. How can I add URL's to this list?

The location bar drop-down list shows items based on visited count (bonus points and frecency: frequency and recency) and if you have visited other URLs more often then those will replace other websites.
*https://developer.mozilla.org/en/The_Places_frecency_algorithm
You can't customize this drop-down list and you would have to bookmark websites to have easier access.

When clicking on privious sites in the address bar drop down Firefox has started to just reload the current page, is there a fix?

Until recently I could click on resent sites in the address bar drop down, but now it just reloads the current page (still shows icons and addresses for the sites I'm clicking on). I've tired clearing history and cache, is this a known bug?

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to get the values of drop downs, which are gonna create at run time.

As per my design requirement, I have to create drop downs in an ADF display table.
The no# of rows of the table are gonna decide the no# of the drop downs. User can select the values from drop downs. My issue is, how can I capture the selected values of those drop downs as those are gonna created run time.

Hi
ohh ,ok ,then as u said that u r storing twenty values ,thats y i aksed earlier ,are these form values part of tbale ,or as u said 20 values are there ,for these u r creating 20 form values ???.
My suggestion would be ,u do four calculation and put all your results in a hashmap ,and keep this hash map in to sesion ,using the following method
pageContext.putTransactionTransientValue("HashMapName",myHashMap);
and inside the PFR method when u want to display these values ,u can loop through your hashmap and can display these values.
like this
HasMap hm=pageContext.getTransactionTransientValue("HashMapName");
thanx
Pratap

The "Clear Search History" feature in the upper right drop-down menu no longer works in Firefox 4.

The "Clear Search History" feature in the upper right drop-down menu that shows search terms no longer seems to work in Firefox 4.

It is possible that there is a problem with the file that stores the "Saved Form" data.<br />
Rename or delete formhistory.sqlite (plus formhistory.sqlite-journal and formhistory.sqlite.corrupt and formhistory.dat, if they exist) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the file that stores the "Saved Form" data.<br />
This will remove all saved form data, so you may want to rename formhistory.sqlite to formhistory.sqlite.sav or move the file to another folder in case you need to recover some saved data.
You may also need to delete search.sqlite and search.json in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]

How to find the size and resolution option in the aspect ratio drop down menu for the crop tool

while looking through certain tutorials on the new crop system i came across many that referenced the above mentioned size and resolution option in the access ratio drop down menu. They all mention a dialog box which then appears which looks really useful, however my version doesnt have this option. any help would be appreciated.

Trevor.Dennis wrote:
John, are there already differences? I thought 13.1 was mainly about retina display support, but I guess there would also be other fixes released while they were at it.
Yes, definitely already differences. I sympathize with Photoshop instructors (online and offline).
The headline change was Retina support but that was also made available to non-Cloud versions.
Other Cloud-only changes in 13.1 are listed here
http://helpx.adobe.com/photoshop/using/whats-new.html
http://psd.tutsplus.com/articles/news/cs6_1/
Non-Cloud CS6 users have been very vocal and disgruntled about some of these changes.

Opening Word document templates from the New Document drop down does not open Word

I have a document library with a number of Content Types attached to it. Each one has a different Word document attached. We have an intermittent problem where when you click to open one of these templates from the 'New Document' drop
down list that nothing happens. The workaround appears to be either open Word first or re-boot the computer. I think there is a problem with SharePoint not linking in with Word correctly. Does anyone have any suggestions on how to fix this?
Thanks
Julie
J Sykes

Hi J,
Can you please check in your internet explorer whether MS office Add ons enable or not.
If not enable that and restart your browser and try again.
Also try to repair MS Office if issue still persist.
Regards
Soni K

How do I locate my thumb drive in from the "look in" drop down?

I'm trying to open a document from my thumb drive. However, when I select the "look in" drop down it's not listed. It's listed under the finder as a device and I can see the document from there. However, because I don't have this software to open the document, I have to open it from an icloud account through my school. Does anyone have any suggestions?

Upper-right corner of Firefox, hit the center of the 3 buttons to Maximize the browser window.

Yesterday I updated logic pro and my IK Multimedia ARC system has disappeared from the plug in drop down window, how can I get it back, it appears on old files but not new ones

yesterday I updated logic pro, I have just discovered that my IK Multimedia ARC system has disappeared from the plug in drop down window, can anyone advise how I can get it back. It seems that old logic files where it was previously loaded still have the plug in live, but on a new project file it simply isn't there to select and activate.

Not sure about your issue. What did you update from and to? Is ARC still in the plugins/components folder?
I'm an ARC user too. I have it plugged in to Audio Hijack Pro which is set to hijack audio from Logic. This way ARC is after logic and you don't have to remember to bypass the plugin before you bounce.

Is there a bug in the score layout drop-down?

Similar Messages

Maybe you are looking for