Is there a cable that will go from my hp psc 500 printer to a usb port on my computer.

Is there a cable that will go from my hp psc 500 printer to a usb port on my computer.
This question was solved.
View Solution.

Hi there dcjoe,
A lot of places carry the cables you are looking for. Though your area may vary I have found them in places like radioshack and wal-mart. Here is a google shopping link to get you started. Let us know if this helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

Is there a cable that will go from lightning to usb to allow me to input video from a video camera?

Is there a lightning cable to usb that would allow me to input video from my HD video camera?

Note, that the video must be in a format understood by the iPad. Not all cameras produce videos in formats that the iPad can read.
Apple wrote:
Video formats supported: H.264 video up to 1080p, 60 frames per second, High Profile level 4.2 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
http://www.apple.com/ipad-air/specs/

My 4s is not compatible with my car stereo. Is there a cable that will fix this?

My JVC KD-AHD69 worked great with my 3GS. It does not recognize my new 4S. The stereo is not updatable. Is this a dock connector pin out issue? Is there some adapter that would fix this?

Hi there dcjoe,
A lot of places carry the cables you are looking for. Though your area may vary I have found them in places like radioshack and wal-mart. Here is a google shopping link to get you started. Let us know if this helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Is there a cable that will allow me to connect my iPad to a TV using red, yellow, and white adapters?

I have a bunch of movies downloaded on my IPad. However, I cannot play them on the TV in my dorm because it uses RCA connectors. Is there any sort of adapter I can buy from Apple that lets me play them?
All help would be appreciated

Yes you should see this http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a.

In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?

In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?

It's not that simple. You need a "smart" device to connect a hard drive to, like a Time Capsule, or another computer, or an Airport Extreme/Express that was made to share a drive, or some other brand router that has a USB port for sharing a drive, etc.

I can't open RAW files from new Sony Alpha a6000 camera in PSE 11 camera raw editor. Is there an update that will allow me to do this or do I need to always use DNG convertor?

I can't open RAW files from new Sony Alpha a6000 camera in PSE 11 camera raw editor. Is there an update that will allow me to do this or do I need to always use DNG convertor?

You would need to update to PSE 12, or just keep using the DNG converter. Your camera requires ACR 8.4, which isn't compatible with PSE 11. It's also not compatible with PSE 12 if you are running Vista or XP.

Is there an updated cable that will allow a generation 5 ipod to connect to a wv jetta 2012?, Is there an updated cable that will allow a generation 5 ipod to connect to a wv jetta 2012?

Is there an updated cable that will connect a 5th generation ipod,touch to a vw jetta
wagon?

One of these adopters/cables should work:
http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m?fno de=45
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=45
However, check with VW, some accessories like car systems do not work with the adopter and/or iOS 7

Is there a program that will allow me to down load HD video from my Canon HD 10 video camera

Is there a program that will allow me yo doen load hd vidieo from my Canon Hd 10 to my Imac?

For a Mac? Sure. If you have iMovie, Final Cut Express, or Final Cut Pro you can capture your HDV or DV clips with any of these apps.
Russ

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

CS4 will not open Nikon D7000 NEF files; Is there a DNC that will open them?

I have CS4 and Light Room 2
Apparently there is no Camera Raw update for the new Nikon D7000 NEF files for CS4.
I therefore down loaded the Adobe Digital Negative Converter Verson 6.3.0.79 which is compatible with Camera Raw 5.4 or later.
Using that DNC, when I do step 1, "Select the images to convert" I get the message "No items match your search". It apparently is not recongnizing the D7000 NEF files.
Is there another DNC that will open and convert the D7000 NEF files?

I just bought the d7000 yesterday and was experiencing the same issue with cs4. I downloaded the DNG converter from adobe and selected the whole folder where the raw files were located (I was unable to select individual images) and it worked fine. It processed the files one by one with new name (without the $500 CS5 pricetag for now). The DNG files open in bridge and psd. Perhaps try selecting the folder? Good luck.

Is there an App that will sync with microsoft outlook calender?

Is there an App that will sync with microsoft outlook calender?

OK here is a problem I have with my calender- all the events are added mutible times for each event- at least 4 of each. So how do I get all of these mutiable events down to just one event. Now this also includes hollidays and personel events on the calender from outlook. All this I think happened after sync to Cloud- not sure, could have happened after OS 5 update!!! Now this is on my iPhone 4. Now going to my calender on my home computer in outlook no events or holidays are showing in the outlook my calender. If I go to the icloud calender it has mutiable events and holidays like on my iPhone. Now how do I fix this without causing a problem with my other programs?

I have a large wrist (10.0" around). Is there a band that will fit me?

I have a large wrist (10.0" around). Is there a band that will fit me?

I have 230mm wrist. Sounds like you have 254mm wrist. I believe the large leather band may work for you. I encourage you to try it on in store first.
I can only just get the milanese loop over my hand.
The classic buckle I have to do up on the last hole and it has no length in the band to create more holes.
Note: if the classic buckle did not do up for me, I was prepared to go and by a matching 3rd party watch band (20mm width) and make an extension strap from it. I.e. cut the new band two about two inches long and punch a hole in it and fit it between the two parts of the Apple Classic Buckle band.
Or, wait for 3rd party adapters to start shipping so you can fit any normal watch band to the Apple Watch.

Is there an application that will open and view MS publisher?

Is there an application that will open and View MS Publisher files?

Afraid not. You can run Windows on your Mac then run Publisher in Windows. You can find out then if Publisher can export in a "standardized" format other applications might import.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Is there a converter that will allow earlier versions of Audition to open sesx files?

Is there a converter that will allow earlier versions of Audition to open sesx files?

SteveG and ryclark have this covered.
The only thing I would add is that if you really must convert from CS5 to AA3 then use AATranslator to convert to an AA3 xml.
No fx will be converted but you will get the best possible conversion.
Again this is only if you must and obviously the earlier in the project (before applying fx) the better.
FWIW you would only need the $59 version but certainly it is good advice to keep multiple AA versions on your PC

Is there a tutorial that will help in creating a RS232 driver?

I am attempting to write a driver / VI that will control an Animatics "SmartMoter" via a RS232 port. I was able to download sub VI's from www.summerfiles.com.
Is there a tutorial that will help in creating a driver for a RS232 port? I take it that I will need to connect these sub vi's in a correct sequence to be able to communicate through the RS232 port.
Thanks,
Bill

It seems that what you downloaded is a driver. What you need to determine is how to use the functions on the driver to create a high level application. There is a tutorial at http://zone.ni.com/devzone/cda/tut/p/id/2804 that might be useful. The driver you downloaded is lacking in several areas. One of which is documention. Each VI should include a description of what it is and what it does. Each control/indicator should also include a description. I could not find any such information in these VIs. I didn't look at everything because the horrid front panel colors in the SmartMotor.llb was giving me a headache. I did see a VI called SM Tester. This appears to be a high level example that you could use as a model.

Is there a cable that will go from my hp psc 500 printer to a usb port on my computer.

Similar Messages

Maybe you are looking for