Is there a case that could protect from spark or static electricity?

Technicians who work in the field and use the iPads are prone to spark and what not. Is there a case like the Otter Box which is durable and rugged but also protects from static shock? Thanks

You can figure out how to get to the apple support discussion communities but can't figure out how to use google to locate a case?
There are a bunch out there already. Zagg, ghost armor, switcheasy, ifrogz, etc...
Currently have a two peice ifrogz on my ip4 now but probably switching to a switcheasy when the nude ultra clear is available since I want something low profile. 99% my phone is the only thing in the pocket it is in so I don't want something bulky.
As for the bumper case. IMO it *****. have to take it off I think to use your sync cable or if you are going to use a dock of some type. Plus doesn't cover the back or anything. Definitely not a fan of the bumper at all. I would have thought apple would have come out with something better than that.

Similar Messages

In a prior photoshop cc version there were filters that could used as a effect(not a layer) that are NOT available now? why ?

In a prior photoshop cc version there were filters that could used as a effect(not a layer) that are NOT available now? why ?

Ok no one has been able to help me so far this is it. I NEVER had these problems with photoshop CS6 extended edition!
The best i can do to describe the dissappearing filters( from iteratrions of Photoshop CC for the last year to now) and pattern overlays were called marble, stones and concretes. where can aI find a list of pattern overlays?
will it do any good to repost to all on this forum?

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

Is there a cable that will go from my hp psc 500 printer to a usb port on my computer.

Is there a cable that will go from my hp psc 500 printer to a usb port on my computer.
This question was solved.
View Solution.

Hi there dcjoe,
A lot of places carry the cables you are looking for. Though your area may vary I have found them in places like radioshack and wal-mart. Here is a google shopping link to get you started. Let us know if this helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I have a ipad 4th gen with the lightning charging port. I have realised how long it takes to charge and the poor battery life which means I can't take my ipad anywhere. Is there a case that is available that will charge my ipad? I know they are out there

I have a ipad 4th gen with the lightning charging port. I have realised how long it takes to charge and the poor battery life which means I can't take my ipad anywhere. Is there a case that is available that will charge my ipad? I know they are out there for older iPads with the 30pin charger but I can't find one for the lighning 8pin charger.

I don't know what you mean by "poor battery life". If your iPad is working properly you should get 9-10 hours of life.

Is there a case that covers the more of the iPhone 4, unlike the bumper?

Okay, so this is a slightly dumb question, but is there a case (or will there be a case) available that covers more of the iPhone 4, similar to the cases for the iPhone, the iPhone 3G and the iPhone 3GS? I get that the bumper helps with the antenna band but it doesn't really do anything to protect the back or the screen from damage, does it?

You can figure out how to get to the apple support discussion communities but can't figure out how to use google to locate a case?
There are a bunch out there already. Zagg, ghost armor, switcheasy, ifrogz, etc...
Currently have a two peice ifrogz on my ip4 now but probably switching to a switcheasy when the nude ultra clear is available since I want something low profile. 99% my phone is the only thing in the pocket it is in so I don't want something bulky.
As for the bumper case. IMO it *****. have to take it off I think to use your sync cable or if you are going to use a dock of some type. Plus doesn't cover the back or anything. Definitely not a fan of the bumper at all. I would have thought apple would have come out with something better than that.

Is there an app that sends photos from iPad to specific folders on your computer?

Hello,
Sometimes I have screenshots of websites or other saved images on my iPad 2. What I do now is sync my iPad to my iMac once in a while and rename the photos on my computer, after which I place the photos in their respective folders. I was wondering if there's a way for me to transfer my photos from my iPad to specific folders on my iMac wirelessly. For example, if I have a picture of a flower on my iPad, could I transfer the photo wirelessly to my computer and have the photo put in a folder named "Flower" on my iMac?
Any help greatly appreciated. Thanks.

There are apps that allow you to select and transfer photos from your iPad to your computer via wifi, but I'm not aware of any that have that type of control over where they go to on your computer e.g. Simple Transfer (which also has a free lite version called Simple Photo & Video Transfer)

White macbook 13inch are there are cases that will still fit this computer?

I have a white macBook 7,1 intel core 2 Duo 2.4 GHz
and i need to purchase a case, i know this model is old and discontinued
but are there any similar cases that will still fit this computer?

You might check iFixIt. Also, check eBay.

Is there a cable that will go from lightning to usb to allow me to input video from a video camera?

Is there a lightning cable to usb that would allow me to input video from my HD video camera?

Note, that the video must be in a format understood by the iPad. Not all cameras produce videos in formats that the iPad can read.
Apple wrote:
Video formats supported: H.264 video up to 1080p, 60 frames per second, High Profile level 4.2 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
http://www.apple.com/ipad-air/specs/

How to convert vi´s writen in version 5.1 to version 6.1, is there a converter that could be downloaded?

I have the problem that we got a upgrade of Labview 5.1 to 6.1. Now the vi´s writen in the old version could not be loaded into the new one. Is there anywhere a converter that coul upgrade the old vi´s so that they could be run in Labview 6.1.

LabVIEW 6.1 will convert 5.1 VIs with no problem usually. What kind of message do you get when you try to open the old VIs? Cannot it not find some subVIs, are some of the VIs saved without a diagram, or are there CINs/DLLs missing? It would also help if you attached a VI (along with all subVIs) that you can't convert.

Can someone recommend a strong macbook case that will protect my 13" macbook air?

i need a case (NOT a shell) that will effectively protect my macbook air while it is in my bag so it wont bedented or bent in any way. price can not be over £70 and it MUST BE VERY STRONG.
Thanks Guys.

I know it's a bit late, but I have the Hard Candy Bubble sleeve, and I absolutely love it. The rubber bumpers on the inside make me very confident in its protection level. http://www.amazon.com/Hard-Candy-MacBook-11-inch-Ultrabooks/dp/B004B8VIR6/ref=cm _cr_pr_product_top/180-8173085-4460503

Is there an IDOC that be generated from a Goods Receipt?

My scenario is that I need to update a 3rd party system whenever we receive a part in the WH against a PO using MIGO. I'm wondering if there is an IDOC that can be triggered to send some sort of update when this occurs. I know about WMMBXY but it seems that this can only be used for inbound processing.
Just to be clear, I am not looking for an IDOC I can use to post a goods receipt.
Any suggestions? Thanks in advance.

using the IDOC type and Message type you can configure in the WE20. The Output type depends on your requirement. I am not sure which one you are using...?
WE01, WE02 etc..

HT1414 Is there any way i could restore from the backup of a new IOS software? I had to manually restore my iphone 3 and had to downgrade the IOS Software.

I backuped my iphone 3 when it had a higher IOS software. After i restored my Iphone, i eneded up having to downgrade the IOS software in order for it to fully restore. Now when i try to back up my phone, it says that my iphone is too old for the backup. If i DO upgrade the IOS, i won't be able to use my phone because it becomes too slow and wont even fully restore.
Thanks

If your phone is in recovery mode (You see the iTunes graphic on the phone), you MUST connect the device to a computer and restore the operating system. There is no supported way to get around it. The device had a problem installing the update and it crashed. Sorry.

Is there a tool that could export objects used in a report program?

Hello Experts,
I'm new in ABAP programming, recently my team members wanted to find a tool in the SAP system, which could export a list of objects that used in a report program. For example, I want to figure out what function modules and classes are used in a report program, using the tool, I could get a list that have the name of the modules and classed used and even source code of them.
The function of the tool acts like 'where-used list' showed in the SAP system, but the differences is I do not have to type the name of the objects. The tool is just focus on the specific report program and list the name and source code of the objects used in that report program.
Hope I explain this clearly.
Is SAP system has such tools? Please give me some hints on this.
Thanks you all for the time and help in advance.

Hi Anna,
Welcome to ABAP world,
Check this link
How to identify various objects used in code
hope this is useful to you.
and also seach in the SCN you will find more.
Regards!

Is there a setting that prevents you from moving into the next "set?"

A couple times I have mistakenly hit my "next patch" button one too many and ended up in the next set. This is a problem because the backing track that was playing suddenly stops because I am in the next set, understandably.
Is there a setting or mapping that I can use so I can't enter the next set using the "next patch" button and only use the "next set" button.
Any ideas out there???
Thanks!!!!

Forget the physical controller button for a moment, that's a red herring.
I have a single button on the screen that for SOME PATCHES ONLY, has the action "Current Program Number" associated with it. In the "Map Parameter" area, there are two sliders for which you set values for "Button On" and Button Off". Those get set to the same value, which is the value of the patch to which you want to go next.
So suppose you have patch 1 and in that batch, the aforementioned button has its values set to 5, then if you press that button WHEN YOU ARE IN PATCH 1, then you will switch to patch 5. Now, further suppose that in patch 5, that same button has its values set for patch 12. Then pressing that button WHEN YOU ARE IN PATCH 5, will take you to patch 12.
Now, if you go into learn mode and associate that screen button with a physical controller button, then you can do exactly the same thing by pressing that physical button. The patch to which you will go will depend on which patch is currently active. If the last patch in that chain doesn't have any values associated with the button, then pressing that button (via your controller) will do nothing at all.
I suppose that if you're concerned with hitting that controller button by mistake, then you might actually want to have two buttons, one that takes you to the next patch in your chain, the other to the previous.

Is there a case that could protect from spark or static electricity?

Similar Messages

Maybe you are looking for