Is there a cheaper way to learn/obtain the adobe suite?

I want to learn how to use adobe design studio but $480 is still too expensive for this college student (also im currently looking for a on campus job).... Is there a way of getting it any cheaper or il even take CS4 the previous version at a much cheaper price if they have it? I do not want to pirate it because i think it steals all the hard work the developers have done. Currently im working on a self project and graphics for the TV news club that im in. They do have copies at the studio but it is locked when nobody is there so i can only try it out once a week, plus they are the older versions of the suite, and the computer lab at Webb only has about 4 avaliable macs that have the whole suite and every time i have a moment to go to the lab they are taken often.... If there is a better way to obtain the software please tell me! Right now im using gimp and my trial is about to expire. If there is no other way i understand.
I currently go to eastern connecticut state university

function(){return A.apply(null,[this].concat($A(arguments)))}
That is what you may have been told, but it does not work. Adobe's licensing system is designed to prevent that. In fact there are many complaints about people who have installed the trial and uninstalled it due to problems and complain how the re-install won't work.
People complain about almost everything in this world because the level of their knowledge is not up to scratch. After uninstalling, you need to clear the registry entries (in a Windows system) and this will allow you to install again. However, this is an adobe forum so I do not want to discuss this matter anymore here.
Regards and good luck.

Similar Messages

Is there a cheaper way than insurance 169 to replace my 4s

Is there a cheaper way to get a new iPhone 4S my glass cracked on the back and now the external speaker quit working other than insurance 169

Google is your friend.

HT201343 I have a Mac pro with osx ml in a Ethernet connection and a apple tv with a wireless, there is no way I can see the airplay in my Mac pro

I have a Mac pro with osx ml in a Ethernet connection and a apple tv with a wireless, there is no way I can see the airplay in my Mac pro

Mac Pros don't support Airplay. Only some post 2011 Macs do, MAc Pros aren't amongst them.
http://www.apple.com/uk/osx/specs/
You could try Airparrot software as a workaround.
AC

There is any way to speed up the shipment Dispatched?! I had been order it in the first of Oct. and the planing for shipment time announce to be between 3 to 4 Weeks Delivers 24 Oct, 2012 - 30 Oct, 2012

There is any way to speed up the shipment Dispatched?! I had placing in order in the first of Oct. and the planing for shipment time announce to be between 3 to 4 Weeks Delivers 24 Oct, 2012 - 30 Oct, 2012

No

I was wondering if there is a way to shut off the install mode on my G3 every time I plug in the USB to my Mac. I have an android manager software Mobile Go that this seems to be preventing it from connecting

I was wondering if there is a way to shut off the install mode on my G3 every time I plug in the USB to my Mac. I have an android manager software Mobile Go that this seems to be preventing it from connecting

as62467 We appreciate your G3 question! Let's see how we can help. What you are able to adjust is the USB connection mode by going to the home screen and selecting'recent apps' (in the touch keys bar), settings,storage, the menu (the 3 tiny dots) and tap usb pc connection. If you do not want the software to try and install choose either the internet connection or camera option. Let us know if this helps.
SheritaH_VZW
Follow us on Twitter

Everytime I go to full-screen mode the photo I am working on is on one space while the filmstrip is on another. Also there is no way to get to the menu on top as it is hidden. When I hit the f key everything goes to black and I have to quite the program.

Everytime I go to full-screen mode the photo I am working on is on one space while the filmstrip is on another. Also there is no way to get to the menu on top as it is hidden. When I hit the f key everything goes to black and I have to quite the program. This is the first time I have any problems with Aperture.
I run aperture 3 on OS X 10.7 iMac 27" 2.8GHz i7 16GB.
Thanks for any help.

You have to change the cursor focus.
What I usually do for PDF pages/tabs, is click in the URL/location bar, then F11.<br />
For Flash, if you click on the page outside of the video area/box, F11 should work.

HT1386 when I try to backup my iphone I don't get an option to do so when I control click on my iphone in itunes only eject and restore is there any other way to turn on the backup function?

when I try to backup my iphone I don't get an option to do so when I control click on my iphone in itunes only eject and restore is there any other way to turn on the backup function?

See Here...
How to BackUp
http://support.apple.com/kb/ht1766
Troubleshooting Backup Issues
http://support.apple.com/kb/ts2529

Hi, my iPhone 3GS wall charger stoped working, and I went to Orange shop with my warranty and L.I.G. insurance.They said I should also give them the phone for almost 10 days, isn't there a faster way, is it possible the Apple Store replaces my wall charge

My 5YO daughter owns her very own IPhone 3GS, she got it for her 5YO birthday on the 24th of june. its allready upgraded to iOS5, and works like a charm.
Last evening, while it was charging, a flame appeared and the charger stopped working.The USB still works.
It was plugged in a Belkin 3700 joule along with my 47 Inch Full HD TV .
No storm or something like that, and there was nothing wrong with my TV, as in was still running.
Problem.
I went today to an Orange store here in Romania, with the charger, invoice,warranty, and L.I.G. (London Insurrace Group ((I think))) insurrance, and they said I MUST also bring the iPhone, and thet it will take just about 10 working days for them to give me back the Iphone, and a new charger.
Is there a faster way I can get the wall charger replaced?
Should I try going to the Apple Store with the warranty from Orange.
Thank you for your answers.
Please excuse my English.
CONDOLENCES APPLE. for your painfull loss.

I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

HT4812 I recently fixed my computer and need to reinstall logic pro 9 but I can't find the booklet with my serial number, is there any other way I can get the serial number for logic pro 9 (box)?

I recently fixed my computer and need to reinstall logic pro 9 but I can't find the booklet with my serial number, is there any other way I can get the serial number for logic pro 9 (box)?

If you still have the receipt or other proof of purchase, you can ask Apple to send you the serial. Otherwise, bad luck mate.. Good news is, you can now buy Logic Pro 9 from App Store for just 199 USD

Is there any other way that I can contact Adobe photoshop through their live chat Support?Where I can get an immediate answer?

Is there any other way that I can contact Adobe photoshop through their live chat Support?Where I can get an immediate answer?

Hello Harvey,
you can try this there: "Telephone numbers of customer service and technical support Adobe worldwide"
>>> https://www.adobe.com/eeurope/elicensing/licensemanagement/alm/contact.html (I used Europe's link, but that makes no difference.)
Hans-Günter

Hi, i am having an issue with a basic motion scroll effect. I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me-, probably he didn't unde

Hi, i am having an issue with a basic motion scroll effect.
I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me…, probably he didn't understand what i wanted from him because english is not my native language, so a will try to be very, very clear about this one..
please note, that i am new to muse, this is my first project ever.
my idea is as following:
when the customer comes to our companies site, he just sees our logo on a white Background. the logo consists of, say, four elements. when the customer scrolls down, the logo starts to disassamble: first the first part of the logo flies out the left side of the site, then the second part of the logo vanishes down, then the third part of the logo flies to the right, then the fourth part of the logo flies to the top and out of the customers view. given what i have seen, it is possible to do that….
so…..
now i have the four parts of my logo imported as png files into muse and assembled them in design view to build our companies logo. I select every one of the four parts and go into the scroll effects tab left beside the layers tab. first i enter the same values for every one of the four parts: initial motion: 0x and 0x again for the left and right motion; key position ( t-handle) : 0px; final motion: 0x and 0x again for the left and right value.
now i hit "preview".: the logo is "pinned" at the correct position, i can scroll but the logo stays where it is. so far so good….
now i select all the four elements again and go to the scroll effecs tab. at "final motion", i click the down arrows and enter 1x. I hit Preview…
when i am scrolling down the WHOLE logo goes down…. so far so good.
NOW i want the first part of the logo to go down, THEN the second part to go left, THEN the third part to go up, THEN the fourth part to go right.
so i select ONLY the first part, go to the scroll motion tab, at "final motion" i click the left arrows, then i enter 1x.( the up-down value, i set to 0 again).. i hit Preview…
the first part of the logo goes left as soon as i start scrolling, the other three parts still go down at the same time…
NOW i want the second part of the logo to start moving, when the first part has left the scene, not at the same time as the first part.
SO I SELECT THE SECOND PART AND DRAG ITS T-HANDLE (KEY POSITION) DOWN TO, LETS SAY, 200PX. SO IT STARTS MOVING ONLY AFTER THE CUSTOMER HAS REACHED THAT POINT, RIGHT?
BUT WHEN I PREVIEW THAT ****, THE LOGO IS NOT TOGETHER ANYMORE, THE SECOND PART IS FLOATING ANYWHERE ELSE BUT WHERE IT SHOULD BE…..WTFF????
short: when i move the t handle, the initial position of the object changes. thats what i said to the adobe employee, but he said, that thats the expected behavior….
but if thats so, how can i have my four parts correctly together, so they form my logo, but with different t handles, so that they all start to move at different times??
Pleeease help me, i am dying of frustration here…..:( that behavior cant be right, right?
Thanks so much to everyone who actually reads this post and tries to help…….
All the best,
Niki Lapan

Thank you so much for helping,
But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
Anyway thank you very much for your time and effort!!!!

I need to reinstall acrobat 9 after having my mac hard drive wiped. I have the serial number but there isn't a download link on the adobe website

I need to reinstall acrobat 9 after having my mac hard drive wiped. I have the serial number but there isn't a download link on the adobe website

well PhillyPhan, I can't tell that you're better looking just by your iphoto icon, now can I? Although it is a lovely sunset you've got there.
Thanks for your response to my question, I see your point and will do that, however, I have another folder that was created before I had a Mac, which has all sorts of lovely titles and labels and some of those pictures I brought over to my ibook when I first started. So there are some duplicates in my iphoto library that I already have backed up in that other folder. I guess I shouldn't really obsess about those. I guess I am just nervous about deleting all my prior iphoto library, but I should have faith that it will all be there in my pictures library. Just trying to clean up the virtual mess.
I'll hold my breath and take the plunge.
Thanks!
ibook G4

Hi there, I couldn't find out on the Adobe site, how much an upgrade to include web commerce through Business catalyst is? (I have a standard design cloud membership. Help pls...:-)

Hi there, I couldn't find out on the Adobe site, how much an upgrade to include web commerce through Business catalyst is? (I have a standard design cloud membership. Help pls...:-)

Hi
You can check the BC pricing here
US Yearly Pricing | Adobe Business Catalyst

Is There a Better Way to Work in the Marker List Window?

Is there a better way to sequentially listen to phrases one-by-one in the Marker List window? What I'm doing is Auto-Marking one single long file to break out 271 bits and save each as their own file. It's WAY faster than copying and pasting bits into new files and "saving as" 217 times.
BUT, after Auto-Marking, I have 300-400 phrases to listen to, deleting the non-keepers as I go, until I'm left with my "keeper" 271 marked phrases. But it's so tedious to move from phrase-to-phase. I have to double-click each one before I can hear it (you can move the cursor with the down-arrow, but it won't actually select the audio). So I have to use the mouse (unless I'm missing something) and double-click each of the hundreds of phrases. Then whenever I delete one (which I'll have to do about a hundred times or more to get rid of bad takes, alternates, etc.), inexplicably the cursor jumps way up the list so you have to scroll back down dozens of files to get to where you were. It took me 35 minutes to do it this last time.
Contrast that with Reaper's audition/preview functionality (which, ironically, AA has also, but only for files already saved into a folder). Once I had all the files saved into a folder, I QC'd all 217 files in Reaper and MAN what a difference! All I had to do was use the "down" arrow to advance to the next file AND have it play automatically (Audition can do the same thing with the "Open File" feature). It literally took me 5 minutes to check all 217 files that way. If AA could add that kind of functionality to the Marker List window, or if I'm just completely missing something (very possible) I would REALLY be happy.
Any ideas?
Thanks again! Happy New Years again!
Ken

Wild Duck,
That doesn't quite do what I need. My end-product is 271 (used to be 116) separate files created from one large file. That large one is made up of WAY more than 271 (the VO actor records different versions of some commands, makes mistakes, etc.).
So I need the ability to listen to each marker, and then be able to delete it if need be.
The Playlist makes this impossible in two ways. It only has 2 options for hearing each marker, and neither option allows me to delete that marker after I've heard it. It either plays them all back-to-back without stopping, or it plays each as you click the "Move Down" button. That last one would be great if showed me which marker was playing! But it doesn't, so there is no way for me to know which marker number I just heard, nor can I delete that marker after I hear it.
Sigh.
Thanks for the tip though:).
Ken

Is there an easy way to allow usrs with Adobe Reader to add images to a PDF form?

We are using Adobe Acrobat 10 Pro.
We are currently using the "Ruber Stamp" tool to add customer logos to our forms in order to "Brand" the forms for our customers to use with thier customers.
We would like to make this a simpler process, self-service if possible.
We currently add fillable fields to the form and save with Adobe Extended Features so the customers can fill out the form for their customers and save the changes.
Is it possible to add a field where the customer could click on it as be prompted to load a .jpg ir giff into the field in order to brand it themselves?
They would need to be able to save the change just like all the other fillable fields.
Any thoughts on this one?
If we can't make it self service, is there a better way to do it internally than the Rubber Stamp wher ethe technician could click on the cielf and input the image directly rather than first creating the stamp?
Any help is much appreciated.
Best Regards,
Steve

If you can get your users to use Reader 11, there is a way to do what you want if they are able to convert the images to PDF first. This is relatively simple these days as Ofiice applications can do it and anyone on the Mac can use Preview to convert an image to PDF. It involves setting up a button so that its layout is something other than label only and using the following code in the button's Mouse Up event:
event.target.buttonImportIcon();
This is not available with previous versions of Reader, but it is available with all versions of Acrobat, so you'll be able to test it with Acrobat 10. For more information, see the documentation: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.739.html

Is there a cheaper way to learn/obtain the adobe suite?

Similar Messages

Maybe you are looking for