Is there a "Cisco Recommended" wireless headset for the SPA 504G Phones?

Hello, Is there a "Cisco Recommended" wireless headset for the SPA 504G Phones?
Please let me know.  Thank you, Paul

Hi Paul,
My recommendation would be the "Plantronics Savii 700 series" which have worked consistently and without issues, you need the HL-10 Handset lifter with them which work with the SPA-500 series.
The Savii series come as DECT for when you are using it with a phone (Waaaaaaaaaaaaaay better reception than Bluetooth) and Bluetooth for when you have it synced with a computer at the same time, it also comes with combination headset connectors so you can have one over the head, or around the neck or even just hanging over the ear.
I fully recommend them with the 500 series phones.
Cheers,
David.

Similar Messages

  • Wireless headset for iPhone

    Hi !
    I´ve just converted from a ordinary SoneEricsson-user to now a iPhone 3GS-user. I´ve now concluded my new step and found out that I´m satisfied with everything beside that I´m missing my bluetooth headset from SonyEricsson - a headset with earplugs like the one you use for iPod but without wire connection to the phone. Up to now I´ve only found wireless headsets for the iPhone you must put on the ear all the time - you look like you are working with telephone support or CSI-gards
    I´d be greatful if someone could recommend me a website where I can order my typ of headset for my new iPhone.
    /Marlene

    The BT profile that might accomplish this is not on the iPhone, but even if it were you would not be happy with the results. Go for a good wireless microphone.

  • What is going on with the Sony Wireless Gold Headset for the PS4?

    Can anyone tell me what is happening with the new Sony Gold Wireless Headset for the PS4? Seen here: http://www.bestbuy.com/site/gold-wireless-stereo-headset-for-playstation-4-and-playstation-3/3353002...
    The release date provided by Sony was 2/10/2014. Every other store and website, including Amazon, Gamestop, etc. is selling these now. Best Buy still has them listed as a "Pre-Order". I went to a store today, and they didn't have them out on the shelf. When I inquired about them, they told me that they had them in stock in the back, but were NOT allowed to sell them to customers. No reason was given. I then called the only other store in my area, and they too said that they have them in stock, but due to instructions from corporate, were NOT allowed to sell them to customers. 
    This flies in the face of everything I'm seeing online, which is that people are walking into other Best Buy locations and buying them without issue. The website still has them up in Pre-Order status, but does say will ship them in 1 Business Day. I would really like to buy these from BB today, rather than waiting for shipping or getting them from Amazon. There is NO reason why these shouldn't be able to be sold yet. 
    Does anyone have any idea what is going on? 

    Hello MMcCraryNJ,
    This headset looks pretty great! I can certainly understand wanting to pick a pair up as soon as possible.
    I’m not sure what may have been going on, but it appears to be resolved at this time since the listing on BestBuy.com now has these as “Add to Cart.” If they were still listed as “Pre-Order” over the weekend, it’s entirely possible that the SKU hadn’t been made available to sell yet in store either. Stores may have had them in stock, but the system may not have allowed the sale. I apologize for any inconvenience that this caused.
    I understand that you had been looking at other options for purchasing this headset, but if you’re still looking to buy one you should be able to do so at any Best Buy store that currently has them in stock or through BestBuy.com.
    Sony - Gold Wireless Stereo Headset for PlayStation 4 and PlayStation 3
    Thanks for connecting with us on the forum, and please feel free to let me know if you have any additional questions or concerns.
    Sincerely,
    Matt|Senior Social Media Specialist | Best Buy® Corporate
     Private Message

  • Can anybody actually RECOMMEND a bluetooth headset for the iPhone?

    I see a lot of bad experiences, & not too many good ones.
    Can anybody actually RECOMMEND a bluetooth headset for the iPhone? I just need one that works, with very little features (ie: redial button on headset).

    I've actually posted another thread, and I don't mean to take over the original members post, but I'm hoping this will help others who may be having the same problems. Thanks to all of you who have posted your results with the various headsets!
    I am now on my third iPhone 3G in under six months. The first one would drop calls when the corded Apple headset was plugged in during the call, and the second would cause the caller on the other end to hear an echo when I used the Apple headset. Plus, it did not respond well at all to Bluetooth headsets. Tons of static, call echoes, and noise cancellation not working.
    My experience with the Jawbone 2 has been disappointing. I have heard way too many testimonials of satisfied iPhone users who love the JB2, so I'm beginning to think it's just me. I went through FOUR Jawbone 2 devices in under a month, all because of poor sound quality, and the Noise Assassin not working properly.
    The white rubber tip sat very well against my cheek, and the default medium earpiece fit perfectly in my ear and was very comfortable to wear. Everything seemed to be in order, but the same problems would arise over and over again. I would get poor sound quality on both ends of the call, and people could hear the tv or the radio playing in the background on my end.
    Maybe the structure of my head isn't suited for the JB2, but I have a very normally proportioned head. I refuse to believe it's the device——It has been rated highly by too many people to be the issue. I've all but given up on it, regrettably.
    The Plantronics Discovery 665 I tested had issues with static. I would hear it on my end, even thought the phone was no more than two feet away.
    I'll give the Plantronics 925 a try, as well as the Blue Ant V1. We'll see...

  • My Time Capsule has stopped backing up.  I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message: "The backup was not performed because an error occurred while copying files to the backup disk.

    My Time Capsule has stopped backing up.
    I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
    "The backup was not performed because an error occurred while copying files to the backup disk."
    I have gone into Mac Help and followed this down to stage 4:
    under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily.  Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
    I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ?  How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD.  It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
    Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go.  What is my computer's name?
    Please someone help!  I'm completely stumped.
    Thanks,
    Maggie
    Mac Help says:
    If you back up to a Time Capsule or network disk:
    Open the Time Machine pane of System Preferences, and slide the switch to Off.
    Open Time Machine preferences
    Open Disk Utility, which is in the Utilities folder in the Applications folder. 
    Open Disk Utility
    Make sure the Time Capsule or network disk is turned on and available. 
    Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password. 
    On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes. 
    Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.

    Hello,
    Thanks to the great Pondini...
    http://pondini.org/TM/C3.html

  • What is the best headset for the iphone 5 that is not bluetooth.  I need great listening and speaking quality.

    What would you consider to be the "best" non-bluetooth headset for the Iphone 5?  I have had some serious health issues of which could be stemming from the bluetooth and I need great sound quality both listening and speaking.  Any suggestions?

    Problem with wired headsets is that there is not std for mic in headsets so if its not 100 % made for iphones it will not work

  • What is the Best Blue Tooth headset for the i-phone 3 G? And why?

    Could anyone please tell me what the best Blue Tooth headset for the I-Phone 3 G is, quality and comfort wise, I have tiny ears and don't like the headset that they give with the i-phone it hurts in my ears! If there is a headset that is super comfortable, can you please post and also tell me the pros and cons. Thanks

    just opinions now.
    I drive a truck so I use a Blueparrot BT150. Crystal clear reception, and no one, and I have asked, can tell that I am on a headset. Best noise cancelling mic on the market in my opinion. BUT, it is bigger than most headsets and some people don't like that.
    On the smaller side...finally found what my wife and I think is the best bang for the buck for hers. The Jabra BT 530 Blackmagic. Its small, lightweight, and from my experience talking to her, an extremely good noise cancelling mic.

  • Need the Cisco ASA5520 SYS OID for the LLDP protocol

    Hi :
    I need the Cisco ASA5520 SYS OID for the LLDP protocol so that I can create the network connection between Cisco ASA5520 and the 3rd party networking device in this 3rd party network management management system.
    Can anyone help on this?
    I tried to search the web and got some LLDP MIB files but they all cannot solve the problem. What I think and I need to have now is the SYS OID number for this Cisco ASA5520.
    I know that the SYS OID for ASA5520 is 1.3.6.1.4.1.9.1.670. Now I need is the SYS OID for its LLDP protocol. Can someone help on this?
    Many thanks!
    tangsuan

    Hi Afroj Ahmad:
    I think it is not due with command line. It is the lack of OID information for Cisco ASA5520 to be able discovered by 3rd party Network Management System.
    If I am not wrong, the ASA5520 should have been configured correctly for providing SNMP to the 3rd party network management system (NMS) and as such, the NMS is then able to capture the the SYS OID for ASA5520 is 1.3.6.1.4.1.9.1.670 from the ASA5520.
    The SNMP configuration is as below:
    snmp-server host inside 172.16.0.82 community public version 2c
    snmp-server host inside 172.16.8.50 community public version 2c
    no snmp-server location
    no snmp-server contact
    snmp-server community public
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    snmp-server enable traps syslog
    snmp-server enable traps ipsec start stop
    snmp-server enable traps entity config-change fru-insert fru-remove
    snmp-server enable traps remote-access session-threshold-exceeded
    The 3rd party NMS can capture the product OID from ASA5520 after given the ASA IP address to the NMS. It is the LLDP OID that is not included in the product OID to cause the 3rd NMS cannot link up the LAN connction between the ASA and the 3rd party switch. There is no LLDP configuration in ASA command. I believe the LLDP should be provide externally either by key in manually or upload the MIB file to the 3rd party NMS. I have tried also uploading few MIB files but all not succesfully done.
    I think the direct method is just key in the LLDP OID inside the 3rd party NMS system so that the 3rd NMS can embed the LLDP information into its operation kernel then the NMS can link up the LAN connection between the Cisco ASA and its switch.
    Many thanks!
    tangsuan

  • Plugged my headset for the first time into my iphone4 to listen to music and the sound came out thru the phone and not the headset, anyone else have this challenge? Help

    Plugged my headset for the first time into my iphone4 to listen to music and the sound came out of the phone and not out of the headset.  Anyone else experience this problem?  is there a way around it?

    Sorry saker, but if you have not backed up your data anywhere, and you told the computer, in essence to clear the data and restore it with your iPod data, then you are pretty much out of luck....
    Cheers,
    GB

  • I cannot get my iPad2 to communicate with a Motorola H700 wireless headset. The iPad shows that they are connected, but nothing works.

    I cannot get my iPad2 to communicate with a Motorola H700 wireless headset. The iPad shows that they are connected, but nothing works. I am trying to get the little microphone to show up for voice messaging.

    I have since fiund out that the talk to text feature is only available on devices that support Siri, iPad3, iPhone4 and later. Hope this helps someone else.

  • What is the best wireless printers for the iPad?

    What is the best wireless printers for the iPad?

    YOu may also want to consider that some printer manufacturers have apps you can use to print, and there are third party printer apps you can also use. So really, in theory, any wireless printer will work with an iPad. If it's airprint enabled it'll work natively, if it's not air print then you use their app or a third party app, so you can potentially expand your search to find a good printer that meets any specs you have (speed, or quality or ink cost) and then work with it to make it print with your iPad.

  • SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

    I have a simple column chart grouping on 1 value on the category axis.  For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis.  I right click on the data series and choose "Add calculated series...".  I choose moving average.  I want to move the average over at least 2 periods.
    When I run the report, I get the error "Formula error - there are not enough data points for the period".  The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5).  When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
    I don't think this is entirely acceptable for our end users.  At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart.  Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
    Thank you,
    Dan

    I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
    If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
    <ChartFormulaParameter Name="Period">
                      <Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
    </ChartFormulaParameter>
    What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
    A side note:
    If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

  • I have recently updated to ios5 and when restoring apps etc it says my backup needs a password, i password that i cannot for the life of me remember...is there any 'forgotten password' option available for the backup please?

    i have recently updated to ios5 and when restoring apps etc it says my backup needs a password, a password that i cannot for the life of me remember...is there any 'forgotten password' option available for the backup please?
    i'm desperately in need as EVERYTHING my life revolvesaround is on there

    i have recently updated to ios5 and when restoring apps etc it says my backup needs a password, a password that i cannot for the life of me remember...is there any 'forgotten password' option available for the backup please?
    i'm desperately in need as EVERYTHING my life revolvesaround is on there

  • Is there an external graphics card available for the Mac Mini?

    Is there an external graphics card available for the Mac Mini?

    All you have to do is google your question.
    http://eshop.macsales.com/shop/Thunderbolt/

  • Is there a Digital AV HDMI Adapter for the iPad 2(30pin) that works with iOS8?

    Is there a Digital AV HDMI Adapter for the iPad 2(30pin) that works with iOS8? I had one that connected my Ipad2 to my tv so I can stream netflix on a TV that does not have the internet. As soon as I updated my iPad to iOS8 it no longer works Help!

    You can speak & make notes. Get Dragon Dictation app.
     Cheers, Tom

Maybe you are looking for