Is there a ClipBoard File??

Way back in the 8's and 9's
One was able to salvage and retrieve text stored
in the System's Clipboard file with, say... Canopener,
or other such text digging app (even if the clipboard had been written over or computer restarted).
Is there such a Clipboard "file" in OS X?
Thanks in advance for any assistance
J

No problem. Glad to help.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Similar Messages

Is there a clipboard that saves all things i copied? i think i might've deleted a lot of precious pictures and I'm about to cry.

i cut all of them from iPhoto and accidentally copied the file I was going to paste them to instead of pasting them to the file. are they all gone? Is there a clipboard? I'm freaking out right now these pictures are so valuable and I don't have other copies of them!

With the amount of information you've provided it's impossible to offer a solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
how did you "cut them from iPhoto"?
what fixes have you tried?
where is your library located?
do you have a backup copy of the library, i.e. as thru Time Machine or some other backup strategy?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?

HELP! "There are 309 files that don't belong in the project"

I needed to reformat my OS, so I backed up all my data onto DVD+RW's. (Verbatim brand.) including my imovies. I copied the entire "blahblah.iMovieProject" folder onto the DVD, then copied it back onto the drive after the reinstall. But now when I click on the project, it prompts me about this:
"There are 309 files that don't belong in the project"
and then this:
"There are 160 stray clip files in the project folder. Would you like to put them on the clips pane?"
After I click on "Leave Files Alone" for both of them, (versus move to trash, and Move files to clips pane, respectively), The project opens completely BLANK.
Oh great. Please inform. Am I out of luck?
Oh, btw, it also created like 10 versions of each photo in the "Media" folder. ick. what happened?...
g5 Mac OS X (10.3.9)

Also, one more thing! Now that this has happened, even after I quit and restart the computer, upon opening the application, instead of starting out with a brand new project, the same prompts appear, and then leaves me with that seemingly corrupt project which is blank.

How come most of my songs i purchased on itunes don't work? It says there is no file found for it when I bought the songs. I need help!

I bought many songs from Itunes and when I went to plug in and download my songs onto my laptop it only downloaded 20 songs that I purchased and the rest were counted as "There was no file to support this song" And I don't know how that even happened and now on my ipad none of the cover art for the purchased songs show up and none of the songs I bought on itunes are shown and play when I go to the purchase part of the music itunes store and its really ******* me off making me feel like I just wasted money on buying songs I can never listen too! I need to know how I can fix it ASAP.

You can redownload the songs as many times as you want, the "one time regrant" no longer exists. Make sure you are using the same apple id on both your dead itouch and your iphone 4. On your iphone 4 go to the itunes app > Purchased (may be under more based on your settings) at the top click not on this iphone, click all songs then click the little cloud next to each song you want to redownload. It will prompt you for your id and password and the begin your download

Powershell: There is no file with URL error during file upload.

I am trying to put together a PowerShell script that I could use to upload files from a local directory, into a Document Library in a Record Center Site. Here is what my script looks like...
#Open web and library
$web = Get-SPWeb $webUrl
$docLibrary = $web.Lists[$docLibraryName]
$files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
Write-Host "Local Directory:" $localFolderPath
ForEach($file in $files)
Write-Host "Looping through files"
Write-Host "Current file:" $file
ElseIf ($contentType = "MyContentType")
#Open file
$fileStream = ([System.IO.FileInfo] (Get-Item $file.FullName)).OpenRead()
# Gather the file name
$FileName = $File.Name
#remove file extension
$NewName = [IO.Path]::GetFileNameWithoutExtension($FileName)
#split the file name by the "-" character
$FileNameArray = $NewName.split("_")
$check = $FileNameArray.Length
#Add file
$folder = $web.getfolder($docLibraryUrlName)
write-host "Copying file " $file.Name " to " $folder.ServerRelativeUrl "..."
$spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stream]$fileStream, $true)
$spItem = $spFile.Item
write-host "Success"
#populate columns
$spItem["Application Number"] = $FileNameArray[0].ToString()
$spItem["Site Number"] = $FileNameArray[1].ToString()
$spItem.Update()
$fileStream.Close();
Each time I run my script, I get this error message
Exception calling "Add" with "3" argument(s): "<nativehr>0x80070003</nativehr><nativestack></nativestack>There is no file with URL 'http://myRecordLibrarySite/myRecord Library/12587_B2317.PDF' in this Web."
At C:\powershellscripts\Upload-FilesIntoSharePoint.ps1:72 char:6
+ $spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stre ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DirectoryNotFoundException
I have not been able to nail down why the script is failing. Any ideas why? Thanks for the help.

I just figured out the issue with adding the file. I went in this direction, and my code has progressed forward.
$folder = $web.getfolder($docLibrary.rootFolder.URL)

My iMac just crashed, and I had some documents open in Pages that were unsaved. Is there a temporary file or backup file that I can access as on a PC? (I have just looked in Timemachine which I had operating, but it did not seem to have any temp files).

My iMac just crashed, and I had some documents open in Pages that were unsaved. Is there a temporary file or backup file that I can access as on a PC? (I have just looked in Timemachine which I had operating, but it did not seem to have any temp files in it at all - not sure what it would be useful for then).
Any suggestions?

Question asked and answered several times.
If you didn't save, nothing is recoverable.
iWork apps don't create temp files so, as far as you on't save something, Time Machine can't archive it.
Yvan KOENIG (VALLAURIS, France) mardi 5 juillet 2011 12:25:31
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

J2ee1.4 installation error - there are no files requiring installation

hi all,
i downloaded the j2ee sdk 1.4 bundle and installed successfully on my suse 8.2. however when i tried doing it on another suse 8.2 machine using the same bundle i got an error that says :
There are no files requiring installation - here's all the output -
Checking available disk space...
Checking Java(TM) 2 Runtime Environment...
Launching Java(TM) 2 Runtime Environment...
Error: There are no files requiring installation.
Deleting temporary files...
i'm new to j2ee so plz, if any one knows how to get around this, let me know.
thanks,
rich

This message will be issued if files necessary for installation are not found once the self-extracting executable extracts its content. If you successfully used same distribution file to install on another machine, it is very likely that the distribution file got corrupted while being moved from one system to another.
If you use ftp to transfer files between systems, make sure that you transfer file in binary mode.
If you don't have the original distribution file anymore, you might need to download the distribution again.

Is Sender File Adapter always throws error when there is no file?

Hi,
I have a simple question but can't find a straight answer to it. I have a Sender File adapter that configured to pick up file XXX* from FTP server every 1 hour. But a file can come every 2, 3, or 7 hours- no certain time.When there is no file I got "File not found " error. As we use alerts, this behaviour is not acceptable.
Does this error comes always if there is no file? Any possible way to avoid this error ?
Thanks for help.
Nataliya

Hi Ravi,
I can see the error in Runtime Workbench under CC monitoring. To be precise it says:
An error occurred while connecting to the FTP server '1X.1XX.XX.XX:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 552 RMS-E-FNF, file not found, ES4_SAP*'. For details, contact your FTP server vendor.
My ftp server has the following set up:
Server: xx.xxx.xx.xx
Port:21
Dataconnection:Active
Timeout:120
Connection secuirity: None
User name .... etc set up.
Connect mode: Per file transfer
Transfer mode:Text
QoS:EO
Pollinterval: 120 (for test purposes)
Processing Mode: delete
Can it be that its a ftp server generates error and sends back to XI?
Thanks,
Nataliya

My ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

my ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

Here:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

Time Machine has been working just fine, but in the last week or two it has given up the ghost. I reset the connections to the drive, and it will basically save a few bytes of data and then hang.
Although Apple originally announced, prior to the release of the first 802.11n AirPort Extreme Base Stations (AEBSn), that it would support Time Machine backups to AirPort Disks, they removed that option before they did finally release the base station for sale.
Since then, Apple has posted (as you have noted) that they DO NOT support Time Machine backups to AirPort Disks. As far as I know, they have not changed from that position and those who do these backups find that they become corrupted over time. Sorry, but it sounds like you just confirmed that for yourself.
1) Has one of the recent updates either on the AE (firmware) or OSX disabled this function?
No. Again, this feature has never been supported by Apple for every generation of AEBSn released.
2) Are there any changes I can make to get this working again?
If your data backups are critical to you, then you will want to use a different solution for your Time Machine backup destination drive strategy. I would suggest that you connect your WD My Book directly to your Mac in the mean time.
Your other options would be to either use a Time Capsule (which interestingly does support TM backups to AirPort Disks) or a non-Apple solution like the Drobo FS or HP MediaSmart server.

I just downloaded itunes and all my music is there but the files won't fit onto my computer so now i can't play the 12000 songs i have n my library y isn't this possible if all the songs are on the cloud ?this is ridiculous ...

i got a new laptop because my old one won't turn on anymore .i can only sync my account to 5 computers so how do i unsync the account from my old laptop if i can't use my old laptop ?and i have over 12000 songs that i now have to individually drag and drop onto my computer that doesn't hold that much space because none of my songs will play because there is no file on computer to back it up .all of my songs are saved in the cloud y isn't that enough to make my songs play ?so now i have a list of songs that won't play on my itunes that won't let me use my account because it's the 6th computer on my account .it's kindda pointless .

Tigon's already got you covered here. But I'll chime in with some English localisation advice.
There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

I recently thought I was updating my Safari browser. When completed, I put all those little files that were on the desktop into the trash. Now my trash is saying it can't be emptied because there are locked files and I don't know how to unlock them

I recently thought I was updating my Safari browser. When completed, I put all those little files that were on the desktop into the trash. Now my trash is saying it can't be emptied because there are locked files and I don't know how to unlock them or get them out of my trash and they keep multiplying. And to make matters worse, I tried renaming them as pdf files thinking that might do the trick.

oh boy ! I'd ask you if you knew what kind of files they were or where they came from, but I don't think you could help me a bunch. Try going to the Utilities folder and running Disk Utilities. If you want to empty the Trash and it won't empty, go to the finder and choose "secure Empty trash". Worse case scenario-you may have to reinstall Snow Leopard, but I don't know what else to suggest. If you have a DVD of Snow Leopard, boot up from that, and reinstall the OS. This will not touch the stuff you have on your Hard Drive, then you can update from 10.6 to 10.6.8, otherwise Onyx? Maybe those files are part of the OS which needs them to keep running. if you hold down the Shift key on reboot, you can reboot in Safe mode and maybe you can take the files out of the trash that way
good luck
John B

I bought an iPhone from Ebay and it did not turn on so I looked on WinSCP and it said there was NO files PLEASE can someone send me iPhon 4 files!

I bought an iPhone from Ebay and it did not turn on so I looked on WinSCP and it said there was NO files PLEASE can someone send me iPhone 4 files!

No, no one can do that. You need to try restoring it:
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?

Are you in DSL? Do you know if your modem is bridged?
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

I'm currently using Adobe Acrobat X to create PDF portfolios for client deliverables. Within the portfolio, there is a "Files" view which can be seen below. I'm interested in knowing if it's possible to bulk import metadata into either the Description fie

I'm currently using Adobe Acrobat X to create PDF portfolios for client deliverables. Within the portfolio, there is a "Files" view which can be seen below. I'm interested in knowing if it's possible to bulk import metadata into either the Description field or any user created field via a CSV, spreadsheet, etc. Thanks for any insight which can be given.

I'm currently using Adobe Acrobat X to create PDF portfolios for client deliverables. Within the portfolio, there is a "Files" view which can be seen below. I'm interested in knowing if it's possible to bulk import metadata into either the Description field or any user created field via a CSV, spreadsheet, etc. Thanks for any insight which can be given.

Is there a ClipBoard File??

Similar Messages

Maybe you are looking for