Is there a command that can open & close a dialpeer on a specified time

Is there a command that can open & close a dialpeer on a specified time on a router

In Callmanager Express and SRST, you can block certain patterns and therefore certain dial peers based on time of day, day of week, and date. See the following links.
Callmanager Express
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide_chapter09186a00802d23e0.html
SRST
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_configuration_guide_chapter09186a0080392682.html
You can accomplish this with Callmanager by using Time of Day Routing. See the following link.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803edbaa.html
Hope this helps. If so, please rate the post.
Brandon

Similar Messages

Is there a way we can open/close posting periods on a "per day" basis?

Hi SAP gurus,
Is there a way we can open/close posting periods on a per day basis?
It is not possible in OB52 since it only has control per period and not per day.
Will assign points for suggestions. =) Thanks!

Hii
In standard SAP there is not such functionality where u can do these kind of configuration...it is at least for a month that is through OB52.
If u still wants this functionality it is through the validation.
u need to create the validation for that company code and thn u can use this functionality....
hope it helps u
reward points if helpful
sejal singh

I upgraded to OSX.8 and cannot load MS Encore. I desperately need some email files from ENCORE. Is there a program that can open my ENCORE email files?

I upgraded to OSX.8 and cannot load MS Encore. I desperately need some email files from ENCORE. Is there a program that can open my ENCORE email files?
SLM01

Do you mean Entourage? It appears you have Office 2004 or older. Those are PowerPC apps only and will not run in Lion or later. If you need access to those emails like, "RIGHT NOW!", then I would suggest purchasing Office 2011 for Mac. Outlook is the new Office email client in 2011 and can import your older Entourage data.

Is there an application that can open idd files besides InDesign?

I create customized training documents, and they have gotten too large to be supported in MS Word. So, I'm looking at moving over to InDesign, but not everyone on my team will need all the power of InDesign. For example, my editors only need to modify the copy as needed. For such minor work, I do not want to purchase 10 copies of InDesign. Is there an inexpensive application out there that can open idd files for minor editing? If not, has anyone used Photoshop to create a graphically rich 200 page document, and used Elements for text editing?

No comment on Photoshop/Elements aside from that being like using a screwdriver to hammer a bolt into a lemon. Possible, but probably messy and likely to leave a sour taste...
Now, on to the InDesign portion of the question.
You do not need for your editors to have InDesign.
Option 1) Use MS Word (or any other text editor) to edit the copy of all the stories. Pro: common app that you already have. Con: unable to see results in final file.
Option 2) Use Adobe InCopy to edit the copy of all the stories. Pro: InCopy can 'open' InDesign files to allow editors to see the effect of their copy changes. Con: new application to purchase and learn.
InCopy is made for what you have in mind, so long as the minor editing is all text.
http://www.adobe.com/products/incopy/
HTH
-mt

Is there a program that can open .desktop icons?

Hi.
I am 15 years old and have downloaded a game thats called Planetside 2 with the program wine and winebottler. It installed perfectly and leaved a icon thats named Planetside2.PSG.desktop. I didn't exit the window until the planetside 2 have uploaded everything. After one day I decided to play Planetside 2 but I couldn't open that icon. Not even my winebottler couldn't open it. Is there a way or a program that can open that. (I do not want any suggestions buy virtual machines because I don't have a disk reader that can run cd´s).
The way I did it.
1. Installed Planetside 2
2. Created a desktop icon for shortcut. (There also came a sort of document Planetside2.PSG.ink)
3. Waited Planetside 2 to upload ( I went about 3 hours so I went to bed).
4. Next morning, tried to use the shortcut (Planetside2.PSG.desktop) to launch it.
5. Searching if there was anything more installed in the computer and I couldn't find anything except that desktop icon.
Well there is one opertuntity that works but it takes a LONG time because I have to install it again and click the repear option to even open Planetside 2.
My computer is a Macbook air with operating system OS X 10.8.4. (its not mountain lion but it was no more option).

Thanks, I should talk to the support and now I know where my game is! I had the problem to find Planetside was one of the problems and it was in a windows c:drive that is almost impossible to find (Spotlight and Finder searches doesn't work). But I found a program that can find EVERY single program which is OmniDiskSweeper. It calculates every folders and programs size and lays a display on how much spaces it takes on your computer. If anyone have problem to find the windows C:drive I can guide you like this:
Machintosh HD>Users>Your computer name (Which would take a lot of gbytes)>Library(Its probably here the folder Library doesn't show up)>Application Support>com.yourcompany.yourapp.??>there is your windows c:drive!
Maybe in some computers it doesn't work but it worked for me how I found my C:drive. I was using a program called wine so that maybe explains the dissapering. Wine laid it on the C:drive.

Is there a command i can run that will give me the serial number

is there a command i can run that will give me the serial number on solaris-9

Imtiaz77 wrote:i got it thankx
root@sunfire2# sneepThat only works if ...
1) you know about SNEEP
2) you hardware is compatible
3) you install it and configure it properly
The answer to your original quetion is:
No, there is nothing already in Solaris 9 that lets you type a command and get a serial number.

How to create an OS command that can be used in the process chains

I need to create a command that can copy files from one location to another for a unix machine.
I have the commands for the unix machine, but need to create a Z customer command so it can be executed in a process chain in SAP

Hi Again,
You can use ABAP program in the process chain.
I guess there are some OS level commands in ABAP which will allow you to open, close, read , write and move files.
Serach in ABAP help or on net.
Bes regards,
Sunmit.

Commands that can be entered in the 'Command Field'

Hello All,
Does anyone know all commands that can be entered in the 'Command Field'.
I am interested in the commands that start with &. For example &sapedit, &vexcel, &vgrid; etc. (OR commands such as PRFB; etc.)
Just curious, where all these commands are stored?
Thanks
Naved

Hi Nablan,
I tried your suggestion. I noticed that it lists some commands but not all.
Foe example, if I am in CMOD tcode; I clicked on GUI Status but nowhere I saw Command 'PRFB'.
According to a post in SDN, in CMOD tcode; by entering PRFB in the command field a list of all field exits are displayed.
Similary, in SE16n; there are field commands like &sapedit, &vexcel and &vgrid...
Please shed light on this,
Thanks

Got my first BB today, is there a app that can monitor data usage?

Hi,
I am a little nervous, my first smartphone, BB 9650...and I am feeling really dumb. But I am chugging along. I have the $15 plan, only really using for email, txt....is there a app that can give me a warning if I am getting close to my 150mg limit?
thanks

Hi,
The best app to use for Verizon Wireless customers to check their data is My Verizon. There should be an icon on your Blackberry that was pushed to your device. Using My Verizon does not cost you any data time...it is free. Hope this helps,
Doc

Are there any genres that can be added like "New Age"

I would like to use the Magic options but would like to have a more "mellow" result.
Are there other genres that can be downloaded and added?

Pondini wrote:
Where did you see that? Disk Utility should be able to do it, if the empty space is at the end of the drive. See #4 in Using Disk Utility.
I haven't done it with an encrypted OSX partition, but have with an encrypted Time Machine partition.
In DiskUtility, you see the following message: "Disk Utility cannot modify this disk because it contains CoreStorage physical volumes. Use command line diskutil instead."
And when I try to resize with diskutil:
# diskutil resizeVolume /dev/disk0 limits
Volume format does not support resizing
So as far as I can tell, my only option is to decrypt and resize. Eeeks. Took 15 hours to encrypt, so will take at least as long to decrypt, and then resize and re-encrypt. Am looking for a faster solution.
Thanks,
Eric

Is there an application that will open and view MS publisher?

Is there an application that will open and View MS Publisher files?

Afraid not. You can run Windows on your Mac then run Publisher in Windows. You can find out then if Publisher can export in a "standardized" format other applications might import.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

I have a .mov file that is 59 gigs. Is there a converter that can reduce the file size with minor resolution loss so I can import it into final cut express?

I have a .mov file that is 59 gigs. Is there a converter that can reduce the file size with minor resolution loss so I can import it into final cut express?

Open the file in QuickTime Player. Then do Tools > Show Movie Inspector. What does it say for Format and FPS?
At 59GB, I suspect you have either a 4 hour DV video or a 1+ hour video that was converted to Apple Intermediate Codec. If it's either of those, you can import it directly into FCE provided you select the appropriate Easy Setup first. Your clips have to match the properties of the Easy Setup you are using.
If it's neither DV or AIC then you need to convert it to one of those codecs. (QuickTime/DV or QuickTime/AIC) Many people in this forum rely on MPEG Streamclip (it's free and works great).

Is there an app that can read the adresse in calender and use it in a gps app so you dont have to right it 2 times.

Is there an app that can read the adresse in calender and use it in a gps app so you dont have to right it 2 times.

If it is a complete address, and is formated properly, it should appear as a link. Tap on it and it will open the Maps App.

Create exe that can open .llb and edit contents

Is there a way to create an exe that can open a Labview .LLB and replace certain vi's within it? I'm trying to develop a patching tool that can make upgrades and fixes to existing customer installations without requiring the customer to reinstall the entire product.

Jim77215 wrote:
thankyou for that information. I've been trying to download download VIPM 1.0 but so far have not been successful. The download starts but never gets past the 2% marker.
I just tested the download and it seems to be working OK. Are you still having issues?

Are there additional Titles that can be downloaded?

Coming from the Sony movie studio, I'm sorely dissapointed at the quality & quantity of titles.
Has anyone made any additional ones that can be downloaded & used?
For example: I'm using the 'extreme_lower3rd_hd' title found under 'HD Templates'.
It's an OK title, however I would like to see the graphic portion in another color (red or green). Is there anyway to change this?
Thanks,
Levi
PE12

I know that there are addition PrE Menu Sets, available for a paid subscription, or for sale individually for a fee, from Muvipix.com.
I do not recall seeing any Title Templates there, but might have missed them?
I also do not recall seeing any additional Title Templates on any other Web sites.
Premiere (both Elements & Pro) use the .PRTL (Title Template) format, so can only be used in Premiere. I know of no other programs, such as Photoshop, Painter, PaintShop Pro, etc., that can Open and edit .PRTL files - only Premiere.
Now, one CAN create titles in other programs, to be used as Still Images in Premiere, BUT to make changes to those, one needs to take them back into the creating program, or similar, and the Titler/Title Editor in Premiere cannot edit them, though there ARE things that can be done, such as creating a Title, in Titler, to overlay the title with say new elements (Shapes for instance), or additional Text, but that is all that can be done in Premiere.
Maybe others will know of sources for .PRTL files, but I have not found them.
Good luck,
Hunt

Is there a command that can open & close a dialpeer on a specified time

Similar Messages

Maybe you are looking for