Is there a command to know the current throughput fo an IPS

Hi guys
I need to get some information from my CISCO IPS. I need to get the current throughput from the IPS but I cannot find any command that could bring such information.
If somebody know how to get this information it will be great.
Regards!

I had a script that would log in, run a "show stat analysis" twice, 60 seconds apart. Then it would pull the byte count from the interfaces, subtract the smaller number from the larder, device by 60 (seconds) and multiply by 8 (bytes to bits).
Results in b/s for each interface.
- Bob

Similar Messages

How to know the current Task/Job ID in which a request is waiting for

Hi Team,
Is there any table/view in IDM 7.2 that provides current task/job ID number a request is waiting for?
Even though the last completed phase of the request can be seen from admin UI that only shows the description of the completed steps but not the technical details like task ID/Job ID of the current step.
Knowing the current step/Job ID helps the admin a lot to directly go the step when the request is waiting for long/got failed etc..
Regards,
Venkata Bavirisetty

Hi Matt,
Thanks for your response.
I read few articles in your blog couple of weeks before and they are very much informative.
The information provided in the provisioning queue just shows the task ID and no.of requests (without request nos) waiting in that task.
Basically the question I have mentioned in my previous post is not related to any specific task type. It is like using request no we wanted to know complete request history specially the current task (task ID) at which the request is waiting for.
Regards,
Venkata Bavirisetty

Command to know the Memory utlization

Is there is a command to know the Memory utilization for a particular process ID. I can get this for USERNAME basis using prstat -a.

ps

SetRepo command to view the current Index repository location

Hi,
I am using the following command to view the current location of the index repository.
./lh -Djava.ext.dirs=/usr/WebSphere/AppServer/java/jre/lib/ext:/usr/WebSphere/AppServer/lib setRepo -icom.ibm.websphere.naming.WsnInitialContextFactory -c
However I get the following error
Feb 11, 2009 5:08:28 PM com.ibm.ejs.j2c.ConnectionFactoryBuilderImpl
SEVERE: SET_METHOD_EXCP_J2CA0036
Feb 11, 2009 5:08:29 PM com.ibm.ejs.j2c.ConnectionFactoryBuilderImpl
SEVERE: CREATE_MANAGED_CONNECTION_FACTORY_DETAILS_EXCP_J2CA0009
Feb 11, 2009 5:08:29 PM com.ibm.ws.naming.util.Helpers
WARNING: jndiGetObjInstErr
Feb 11, 2009 5:08:29 PM com.ibm.ws.naming.util.Helpers
WARNING: jndiNamingException
com.ibm.websphere.naming.CannotInstantiateObjectException: Exception occurred while the JNDI NamingManager was processing a javax.naming.Reference object. [Root exception is java.lang.reflect.InvocationTargetException]
Cannot reach current repository location:com.waveset.util.ConfigurationError: Failed to load JDBC DataSource 'jdbc/eumdevrepo2':
==> com.ibm.websphere.naming.CannotInstantiateObjectException: Exception occurred while the JNDI NamingManager was processing a javax.naming.Reference object
From my appserver admin console, I am able to test my datasource and it works fine without any issues. any ideas as to what could be the problem?
thanks

Hi ,
No, there is not a shortcut keyboard command to insert the current date into a Date cell in Datasheet view.
For your issue, you can set the default value of the Date column to “Today’s Date”:
Go to your list -> List Settings -> select the Date column
under Columns section.
Select “Today’s Date” to default value.
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to know the current version of SAP

Hi everybody,
How can we know the current version of SAP we are working with? Is there any function module for it?
please let me know.
thanks in advance,
regards,
mounika.

goto sap...From MENU System-->Status...it will open a popup..Under component version..the is a click icon...click on it and it will open another popup where u will find details...example...
SAP_BASIS     620
SAP_ABA                     620
SAP_APPL     470
SAP_HR                     470
EA-IPPE                     110
So, basis is on 6.2 & abap gui is on 6.2 where as abap application is on 4.7

How do I change the password in iPhone without knowing the current PW?

I synced my iPhone 4S and know my access password very well, yet the phone tells me it's wrong. I have no access to my data and can't make phone calls as the access is denied.
How can I retrieve control over my phone again? Is there a way to change the pw without knowing the current one?
---- HELP!!!

LOST PASSCODE
You may be able to reset the passcode by restoring the device.
Connect the device to the computer with which you normally sync and open iTunes.
Note: If iTunes prompts you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes", below.
Right-click the device in the left column and select Back up.
When the backup is complete, select Restore.
When finished, restore from your most recent backup.
Otherwise read this
If that doesn’t work you will need to perform a factory restore to remove it. Or read:
Enter Wrong passcode
http://support.apple.com/kb/ht1212

Is there any way to know the T-code from the screen?

Hi friemds,
it s a general question. but I found relavant for posting here.
I saw our group friens giving some T-codes for spro functions (eg: SNRO, M/06), bbut how to know the transaction from path. i.e. If I go to condition types screen, there I could not see any transaction. is there any way to know the T-code from the screen?

Hi,
Listed here are the various ways you can find the list of transaction codes and their usage:
Use transaction SE11 - ABAP Dictionary:
Fill in the Database table name and click the Display button.
- TSTC table will contain all the Tcodes and
- TSTCT table will contain all the Tcodes with Texts.
Once you entered the screen, click in Top Menu - Utilities - Table contents - Display
If you want to display all the transaction code (total - 57,048) you have to change the Fields: Maximum number of hits to 99999 (default 500).
or
Simply goto transaction SM01, although this tcode is to Lock/Unlock any transaction code, you can also view all the tcode available in the R/3 system from here.
or
Goto transaction SE93
There are two ways where you can find the list of transaction codes in SE93.
Method 1:
You must be familiar with the starting characters strings for each of the R/3 application modules.
Assuming you know that most Materials Management transaction codes start with MM.
In the Fields: Transaction code, type in MM* and press the function key F4
The list of transaction code starting with MM will be displayed.
Method 2:
On the Top Menu, click Utilities - Find - Execute and the first 500 transaction will be display.
If want to display all the tcodes, make sure you remembered to change the Fields: Maximum no. of hits right at the bottom of the screen.
I know a particular T Code and can enter and work on it. How do I know what is the menu path for that T Code?
Enter Search_SAP_Menu in the command box and when the pop box appears enter, the Tcode and it will give the nodes and menu path.
This is helpful only in case of SAP Menu not in case of SPRO - ie IMG.....
Reward if Helpful,
Regards,
Archit.

How do you reset your password if you dont know the current password

Does anyone know how to reset your password if you do not know the current password

If you have forgotten your Apple ID password: If you forgot your Apple ID password
If it's your iPhone passcode; then you need to do a restore: Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled

Is there a command to sync the end of a region to the playhead or the end of another region?

Is there a command to sync the end of a region to the playhead or the end of another region?

For youtube the code would be something like this:
view-source:calkaweb.herobo.com/video.html
for HTML5 videos for youtube replace &version=3 with &html5=1 in the youtube URL
I have no idea how to impletent the youtube code into Edge tho other than an iframe but that wouldn't work I've tried :
http://forums.adobe.com/thread/1285212
You would need to place all of the youtube codes into edge in order for it to work but I duno how to do that and no1 answered the question in the thread I made about it.
as for MP4/HTML5 video you can use
var video = document.getElementsByTagName('video')[0];
video.onended = function(e) {
/*Do Something*/

Local USB "There's no media in the current folder"

Hi Forum, I have a no media in current folder error with my WDTV Plus. I searched the forum and googled for hours but everyone seems to have this problem with network streaming or the suggestions don't work for me. My media is on a Seagate 3TB USB Drive which is connected directly to the WDTV, no ethernet cable in use, everything local.This setup worked for three years now. Two months ago, some subfolders began to have the "no media" error, but most of the files worked. Now I get this error in the root and I am not able to play a single file.The USB drive is formatted with ntfs. What I noticed:- I also get an error when I choose USB Storage in the menu (right before it would show the folder structure where now the no media error appears). It says "Unable to create media library. check your storage setting".- the .wd-tv folder in the root of the disk always has the last changed date 01.01.2000, all other files have timestamps from the last 3 years.- When I go to file management on the wdtv I can see all my files and folders. I can even delete and copy them around. What I've done so far:- Updated to the newest firmware, nothing changed.- Plugged my USB disk to my laptop and checked it for errors. This took 48 hours and there where 0.0% errors, destroyed blocks or something.- Played around with the folder structure, copied files to other folders... I also read that there has to be at least one media file in every subfolder, otherwise wdtv would come up with the no media error. So I did this -> nothing changed.- Deleted the .wd-tv folder on the disk many times. Played around with the "create media library" setting on the wdtv. It can create a media library (the .wd-tv folder), despite the error "unable to create media library".- Permissions on all folders and subfolders on the USB drive are full control for everyone.- When I plug in a 16GB usb flash drive with some video files on it everything works fine. could it be that there are some currupted files that wdtv can't read? If so, how could I detect them?Has anybody occured the same sort of problem? Thanks in advance,Sandro

Hi,
See if the following link helps.
http://community.wd.com/t5/WD-TV-Live-Live-Plus/quot-There-is-no-media-in-the-current-folder-quot-Oh-yes-there/m-p/291008#M25793

Is there any query to know the multiple users name from their ids?

is there any query to know the multiple users name from their ids?

Hi,
Goto TCode SUIM  Select Users  Select Users by Address Data
It will give you the users list
Regards,
Sankaran

How to know the current patch or version of 11g

How to know the current version of the 11g with patch info?

Check this
http://obi9.blogspot.com/2012/11/determining-current-patch-levels.html
If helps pls mark

Is there a way to know the qualifier or qualifers that were applied

Hi All,
If I have a promotion like this Buy2 get 2 is there a way to know the qualifier or qualifiers that were applied?
I will end up by having 4 commerce Items and two will be free with an adjustment of the promotion that was applied, but I do not know which items were the ones that make that possible
is there a way to know that?
Which items were used to get a BOGO or BuyXGetY?
Regards,
Obed

Hi All,
If someone needs to know this in the future
findQualifyingItems() is the one in charge of knowing which items had promotions and it calls a method called evaluateQualifier wihch "can" contain a List of items that are the ones that were used to apply a promotion like BOGO or BuyXGetY.
Basically the solution for me was override QualifierService and
@Override
public Collection findQualifyingItems(PricingContext pPricingContext,
Map pExtraParametersMap)
In order to save the info in a Map I am using CommerceItemMarkers http://docs.oracle.com/cd/E35318_02/Platform.10-1-1/ATGCommStoreGuide/html/s1401usingorderandcommerceitemmarkers01.html
And now I have my business requirement covered thanks to this.
Regards,
Obed
Edited by: obedmhg on May 17, 2013 2:53 PM

My iphone is stolen .. is there any way to know the numbe of the person going to use in the future .. I have the serial no. and every thing .. and it is registered under my name and my information with iTunes ??

my iphone is stolen .. is there any way to know the numbe of the person going to use in the future .. I have the serial no. and every thing .. and it is registered under my name and my information with iTunes ??

If you had find my iphone activated on the iphone itself before it was stolen, then you may be able to track it.
Otherwise, there is nothing you can do.
Sorry.
Report it to the police and your wireless carrier and change your password.

Is there any command to find the running cloud services in the current PC in windows?

Is there way to find the list of running cloud service providers in the current PC through C++ programming ?
Or is there any other tool which gives the list of service providers running in the PC?
I know this question is not related to Azure but Azure comes under this part..
Please let me know the answer if any one is aware of it....

Hello DeekshaBharathi,
There are only 3 ways of communicating with the Azure cloud services:
a. Management Portal
http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-manage/
b. REST APIs
http://msdn.microsoft.com/en-us/library/azure/ee460799.aspx
c. Powershell
http://msdn.microsoft.com/en-us/library/azure/jj156055.aspx
Since that you want to use commands to manage Cloud Services. You can do it using PowerShell. You can refer to the article above for more information on this.
Thanks,
Syed Irfan Hussain.

Is there a command to know the current throughput fo an IPS

Similar Messages

Maybe you are looking for