Is there a command which sends an application to another desktop?

Hi!
I am unable to send Chromium to another desktop, because when I click with the right mouse button I don't get the LXDE menu. Is there any CLI command which can do this task?

http://openbox.org/wiki/Help:Bindings
http://openbox.org/wiki/Help:Actions
(edit) These thinks were obviously useless, Trilby. Next time I'll use the stuck zentries reply.
Last edited by 2ManyDogs (2013-08-10 15:53:03)

Similar Messages

  • Is there a command which I can use to dump all the configurations as I set out in System Preferences on the Server?

    Hi folks,
    I am planning to reinstall OS X 10.6 on my Mac Server.  As such I need to collect all the configurations like User Account, User Password, File Sharing... which all are previously setup in the System Preferences.
    Instead of writing them down on paper, is there a command which I can execute to dump all these data to a file so that I can refer to them easily?

    I support Mac OS X Server at some schools, so I run it as a Home Server.
    I do not understand your question.
    Server is a package of additions that runs with Mac OS X as if it were part of the Operating System (login is not required for Server components to start up). It is not a wildly different Operating System. There is even an Installer package that allows you to ADD the server componets to an already-installed Mac OS X
    User information such as Preferences are stored in a /Users/<user_name>.
    This does not change after you install Server, but you can move the Users folder elsewhere, or you can move the Users accounts to an Open Directory database.

  • Shortcuts made in firefox give following fault just before they open: "fault during command is sending to application"

    shortcuts made in firefox give following fault just before they open: "fault during command is sending to application"
    only the shortcuts i made with firefox not those a made with IE.
    FF is my default browser

    Try:
    *http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

  • Exporting Local DCs - which can be imported in another desktop - Procedure?

    Hi All,
    Please let us know what is the procdure to export Local Dcs which can be imported in another desktop.
    Regards,
    ganga

    Hi Ganga
    Please refer to this thread for Export local DC : [Click here |/message/9414062#9414062 [original link is broken];
    Import Local file system DC :
    1. For exported DC, Directly import in NWDS using File >> Import >> Existing project in Workspace >> Browser Exported DC >> Select Ok >> Finish. It will create with the same name as exported DC
    2. For Copied from Workspace : Create new DC and put _Comp folder in it from Copied DC.
    Hope it will helps
    Regards
    Arun Jaiswal

  • Is there a command which terminates all functions at once?

    I need a command which terminates all functions at once beside the red knob in the headline. Is there any?

    Are you talking about LabVIEW? If so, you can stop a running VI by calling the "Stop" function, located in the Application Control palette. Also, using the VI Server functions located in the same palette, you can open a reference to a VI and Abort it using the "Invoke Node" primitive.

  • Is there a command to open an application menu because on other peoples macs i saw them open a little bar in the center of there screen with 4 apps running and i have did that before but on accident and i did not know what i clicked. how do i open it?

    HELP! I WANT TO KNOW!

    Mission Control? It isn't a little bar in the center of the screen but does display the running apps. You can access it via the Control+Up arrow key combination and there are preferences for it in System Preferences.

  • HT203146 My Macbook Pro trackpad is unresponsive. Are there key commands which I can use to open my computer?

    Macbook Pro trackpad will not click so I am unable to log in. Are there any suggestions to fix this? Can I use keystrokes to log in and potentially solve the problem?

    Try SMC and NVRAM resets:
    http://support.apple.com/en-us/HT201295
    http://support.apple.com/en-us/HT204063
    Then try a Safe boot:
    http://support.apple.com/en-us/HT201262
    Ciao.

  • Is there a command which updates, at the same time, all tabs open ih Firefox?

    I'd like to update all open tabs in Firefox, without closing them. Is it possible?

    You can right click a tab on the Tab bar: Reload All Tabs

  • Is there a way to send PP renders to another computer on the network?

    Is there a way I can send renders out of Premiere Pro CS6 to another computer on the network that has Adobe Media Encoder CS6 installed?

    You'd have to have PP installed on the other computer as well, and copy all the media and other assets over to that computer, along with the PP project file, and then start PP on that second computer and send to AME from there.
    In short, no.

  • Calling A Webdynpro Application From Another Webdynpro Application

    Hi,
    i want to call a webdynpro application from another webdynpro application with sending parameters.
    i used this method,
    CALL METHOD cl_wd_utilities=>construct_wd_url
        EXPORTING
          application_name = lv_webapp
        IMPORTING
          out_absolute_url = lv_url.
    CONCATENATE lv_url '?param1=' lv_param INTO lv_url.
    data lo_window_manager type ref to if_wd_window_manager.
    data lo_api_component  type ref to if_wd_component.
    data lo_window         type ref to if_wd_window.
    lo_api_component  = wd_comp_controller->wd_get_api( ).
    lo_window_manager = lo_api_component->get_window_manager( ).
    lo_window         = lo_window_manager->CREATE_EXTERNAL_WINDOW(
        URL = LV_URL
    lo_window->open( ).
    but this method shows the parameters on the address bar.
    is there a method to send the parameters to another webdynpro application without show the parameters on the address bar?
    Can somebody help me pls?
    Thanks.

    I've used a server cookie before. This was built for BSP, but it is really usable anywhere.  It just writes the data temporary into the database.  This way you can just pass one meaningless URL parameter - like a GUID and use this key to read the data (the server cookie) upon initialization of the new application.  I generally serialize all the data that I want into one server cookie by serializing a class. I can then restore whatever attributes of the class that I want on the receiving side.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/bd/4cd23a09313b37e10000000a11405a/frameset.htm

  • When i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program

    when i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program.
    i am using office2007  with windows7 premium home edition.  i have checked file associations., all DDE settings. i have even tried this in safe mode. the same thing happens. please note once i see the error. i can then go back to the file click on
    it a second time and it WILL open. AND i can open any file if i open excel and and find the file from there. i uninstalled and re-installed office 2007 from scratch. And i checked the compatibility mode (all un-checked) still the problem persisits. this is
    a real PITA.   anyone have any solution for this? Thanks 
    ken yanow

    Hi,
    Have you try to un-select the Ignore other applications that use Dynamic Data Exchange (DDE) setting?
    Click the Microsoft Office Button, and then click Excel Options.
    Click Advanced, and then click to clear the Ignore other applications that use Dynamic Data Exchange (DDE)
    check box in the General area.
    Click OK.
    If the problem cannot resolve, the Run as administrator may selected.
    Go to Office default install location: C:\Program Files\Microsoft Office\Office12.
    Right-click EXCEL.EXE > Properties >
    Compatibility tab.
    Under Privilege Level, uncheck Run this program as an administrator
    check box.
    Best regards.
    William Zhou
    TechNet Community Support

  • Excel won't open and error message There was a problem sending the command to the programe

    Hi there
    I'd be grateful for your help.
    I've just bought a new laptop and installed Office 2013.  I used Excel 2013, did what I needed to do and saved it.  This was 5 days ago.
    Today, I've tried opening the file from my desktop and get the error message 'There was a problem sending the command to the program'.
    And when I try to open Excel to do the DDE fix, which seems to be the best suggestion, I can't open Excel at all.  I've tried to get into it from the Apps screen.
    Any help would be gratefully appreciated.
    Thanks

    Don't seem like this can be fixed so I went back to version 6.0.2 which works good.
    I have Chrome now as my default browser and will not use fire fox until they fix it!
    Chrome works great!

  • When I open Firefox 4 RC1 by clicking an external link (as from my desktop) I get an error: "there was a problem sending the command to the program"

    A box with this error: "there was a problem sending the command to the program" always pops up upon clicking any URL sitting in my desktop (or from any other folder). It will not happen if Firefox is already open. However, it is only an annoyance as the page fully opens with no problem.
    It started after I downloaded Firefox 4 beta ver 12. It continued after upgraded with RC1. It did not happen in my latest version of Firefox 3.6.x which I removed after installing 4 RC1

    This has happened to me many times but on the older FF 3 It could be a small bug, One should list the PC's being used as it could be related? Mine is an E-Machine Mod, W3609 running W7.

  • There was a problem sending a command to this program. Excel with new templates.

    I have recently deployed these UEV templates for Office 2013.  In particular, I'm having an issue with Excel 2013.  Whenever I let UEV sync settings for this application and I click on a .xlsx file, I get the infamous "There was a problem sending
    a command to this program..." error message.  This drove me nuts for a week thinking there was something wrong with Excel.  I finally figured out it was the Excel UEV settings causing the issue.  I've tried deleing the settings package file,
    but no luck.  I can reproduce the issue pretty easily.

    MS has released hotfix for this issue. http://support.microsoft.com/kb/2927019/. 
    Eswar Koneti | Configmgr blog:
    www.eskonr.com | Linkedin: Eswar Koneti
    | Twitter: Eskonr

  • Can't open Excel files saved to desktop, get popup "There was a problem sending command to the program".

    Whenever I save an MS Excel file to my desktop, it creates an icon on the screen. But when I try to open it, I get a popup that says "There was a problem sending the command to the program."
    This happens with all Excel files - but MS Word and other files work fine.
    Thanks for your help.

    Yes, I saw that earlier but it seems to be a temporary fix. I had the same issue return 2 weeks ago, then again yesterday. Each time, I've tried this solution which works but only to see it return at some time in the near future.
    Coincidently, I have a similar issue occur on my iPhone 4S w/ iOS 6. There, my keyboard shortcuts won't work in forms unless I tick off Data and Documents iCloud setting, power down the phone, then turn it back on. But like this, it only seems to work for a temporary time and the problem resurfaces in a few days.

Maybe you are looking for