Is there a complete demo on Hyperion Planning?

Other products normally attach a complete demo for reference, I can't see it in Hyperion Planning. Might because I can't configure application wizard correctly, does the sample application can totally explain Hyperion's idea and thinking?
I don't think documentation of Hyperion Planning is a good candidate.

I think that you are looking for a sample application for Planning, is that correct?
If so then the later versions (9.3 I think onwards) have a shipped sample application that can be installed from management/creation of application area. In fact I think that 9.2 also contained.
The documentation explains how to install.
Hope this helps
Andy King
http://www.analitica.co.uk

Similar Messages

Hyperion planning installation(Problem with application server deployment)

Hi There:
I am new to hyperion planning.I am trying to install planning.I got problem with Hyperion Configuration utility while configuring application server deployment.Its show message failed.Please guide me how to fix this.If it is possible can you please send me any personal documentation on installation.I am trying this for past 4 day's.Below is the error its showing in configtool
     ... 10 more
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, INFO, Validating dependencies...
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel$5, DEBUG, Product: Planning; Dependencies: []
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, DEBUG, task to execute: HspDBPropertyLocation
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, DEBUG, task to execute: applicationServerDeployment
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.PanelEventDispatcher, DEBUG, constructor
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, AppServerSelectionPanel in queryEnter
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: WebLogic 8.1; deployment type = both
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: WebSphere 5.1; deployment type = both
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: Tomcat 5.0.28; deployment type = both
(Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, AppServerSelectionPanel in queryExit
(Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, DEBUG, AppServer selected: WebLogic 8.1
(Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.ProductCustomInputPanel, ERROR, Error:
java.lang.NullPointerException
     at com.hyperion.cis.config.wizard.ProductCustomInputPanel.queryEnter(ProductCustomInputPanel.java:88)
     at com.installshield.wizard.awt.AWTWizardUI.currentBeanChanged(Unknown Source)
     at com.installshield.wizard.swing.SwingWizardUI.currentBeanChanged(Unknown Source)
     at com.installshield.wizard.StandardWizardListener.currentBeanChanged(Unknown Source)
     at com.installshield.wizard.Wizard$RunThread.run(Unknown Source)
(Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, Starting WebLogic 8.1 deployment...
(Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, pre-Deploy: Planning
(Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, Deploy: Planning
(Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.NullPointerException
     at com.hyperion.cis.config.AppServerDeployer.initContexts(AppServerDeployer.java:628)
     at com.hyperion.cis.config.AppServerDeployer.deploy(AppServerDeployer.java:548)
     at com.hyperion.cis.config.AppServerDeployer.deploy(AppServerDeployer.java:526)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDeployerTask(RunAllTasksWizardAction.java:251)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:156)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Mar 09, 2008, 08:26:13 PM), com.hyperion.cis.config.wizard.CustomSummaryPanel, DEBUG, CustomSummaryPanel in queryExit
Please help me.Email id:[email protected]
Thanks
Harsha.
Message was edited by:
user603943

I think the installation of planning on Vista is difficult. As some of the files doesn't support even i am tired of doing that.
But tell me one thing have you installed all other products , I mean Essbase, (server, client) , AAS and Shared services.
Are they working good .
I have formatted my system to XP and installed everything , but the problem is when i install planning it prompts me that IIS 5 should be greater other wise EPM will not install...
there are lot of things with planning 1) i can't datasource as it is not highlighting when we configure with Shared services
2) It does not create product instance .
If any one can fix this thing by giving me a suggestions.
Advance Thanks

Hyperion Planning hangs (HBR, HSS)

There are a lot of Hyperion Planning users, groups and applications registered in Shared Services. Planning hangs while retrieving Business Rules list. Similar issue was described in Service Fix #7225735. Applying fix #7225735 didn't helped. Shared Services's OpenLDAP eats 20-70% CPU time. The same situation appears while retrieving user's list in EAS Console.
This problem was found during migration process from Planning v9.3.0.1 to v9.3.1.0
Planning v9.3.1.0
Shared Services 9.3.1.0
EAS 9.3.1.0

upgrading to latest 9.3.1.x SF should resolve this issue

Not able to see data in Hyperion Planning data forms.

Hi ,
I created Hyperion planning EPMA application and loaded data in to it. But I am unable to see data in my data forms? Please give me solution for this?

Hi,
Here there are 2 things, once your epma heirarchy is ready did you deploy it against your planning App ? and incase if you haven't deployed your planning application, then old outline would be existing in Essbase and if you load data for old outline it will still take into but when you deploy the database gets restructured and older data gets restructured/removed.
Before going onto that level first check if your load data to essbase completed successfully. and did you load data for the combinations on dataform ? ? Try manually inputting a number through data form and submit and do a refresh to see if value comes up. ? Check your data form settings , if you have enables suppress missing rows/blocks.
Thanks
Amith

Hyperion Planning Web URL is taking Too long time to respond

Hi,
When Users are accessing Hyperion Planning URL web link its taking too long time to respond.We restarted the services after these for 2 hours it works fine after that again same issue.Please advise.

Hi John,
Follwing is the Log noted: when URL is slow:
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R com.hyperion.planning.olap.EssbaseException: ESSG_ERR_OPERATIONFAILED (1100027)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseGridAPI.HspSaveGrid(Native Method)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssGConnection.hspSaveGrid(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseJniOlap.loadOrSaveForm(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseJniOlap.saveForm(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.db.HspFMDBImpl.saveFormGrid(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.SaveFormGrid(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at HspEnterData.Handle(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at HspEnterData.doPost(Unknown Source)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1213)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:658)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:526)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:764)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:133)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:457)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:515)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:300)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
[8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1551)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R com.hyperion.planning.olap.EssbaseException: ESSG_ERR_OPERATIONFAILED (1100027)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseGridAPI.HspSaveGrid(Native Method)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssGConnection.hspSaveGrid(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseJniOlap.loadOrSaveForm(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseJniOlap.saveForm(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.db.HspFMDBImpl.saveFormGrid(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.SaveFormGrid(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at HspEnterData.Handle(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at HspEnterData.doPost(Unknown Source)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1213)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:658)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:526)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:764)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:133)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:457)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:515)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:300)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
[8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1551)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R com.hyperion.planning.olap.EssbaseException: ESSG_ERR_OPERATIONFAILED (1100027)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseGridAPI.HspSaveGrid(Native Method)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssGConnection.hspSaveGrid(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseJniOlap.loadOrSaveForm(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseJniOlap.saveForm(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.db.HspFMDBImpl.saveFormGrid(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.SaveFormGrid(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at HspEnterData.Handle(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at HspEnterData.doPost(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1213)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:658)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:526)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:764)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:133)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:457)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:515)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:300)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1551)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R com.hyperion.planning.HspRuntimeException: There was an error during the save process.
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.db.HspFMDBImpl.saveFormGrid(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.SaveFormGrid(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at HspEnterData.Handle(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at HspEnterData.doPost(Unknown Source)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1213)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:658)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:526)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:764)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:133)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:457)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:515)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:300)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
[8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1551)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R com.hyperion.planning.olap.EssbaseException: ESSG_ERR_OPERATIONFAILED (1100027)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseGridAPI.HspSaveGrid(Native Method)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssGConnection.hspSaveGrid(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseJniOlap.loadOrSaveForm(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseJniOlap.saveForm(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.db.HspFMDBImpl.saveFormGrid(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.SaveFormGrid(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at HspEnterData.Handle(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at HspEnterData.doPost(Unknown Source)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1213)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:658)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:526)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
[8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:764)

How to lock data independently for several groups in Hyperion Planning?

I 'm developing a forecast application using Hyperion Planning 9.3.1 where the users shall be able to enter their monthly forecast numbers. We have two groups of users. Each group may have up to two forecast updates per month. The groups are independent – say, Group A may have one update for August and they want the numbers to be there by August 10th, while the Group B may have two updates for the same month with the first update to be completed by July 20th and second – by August 5th. Nobody knows in advance how many updates they are going to have for the month and when they are going to have them. Nothing should prohibit the users from updating their forecast numbers for the future months – say, they may enter their September forecast in July.
Managers of both groups want to make sure that users don't change forecast numbers after the month close. If they plan to have two updates per month – they want data from the 1st update to be locked (become read-only) before they have 2nd update, and data from 2nd update locked after the month close; if they plan to have only one update per month – they want it locked after the month close.
Any suggestions how I may structure the dimensions of this application to make sure that if I lock first August update for Group B on, say, August 3rd, the other group still can have it open until August 10th?
Thanks!

Hi John
Well i have working knowledge in ODI, i did whole complete cycle and i did customization project for Oracle EBS to Data warehouse though ODI.
What, I am NOT able to figure out How to LINK Hyperion Planning Outline to Oracle EBS HR Tables. cause in Hyperion Outline i m able to view Dimensions Not particular Column to map with EBS HR Table (column).
Eample:
In EBS HR we have Employee Number in Per_all_people_f but in Hyperion Planning Dimension is ONLY Employee.
Your response highly appreciated.
Chreeez
Sher

Hyperion Planning migration error while refreshing/creating Essbase cube

Hi,
I'm migrating a Hyperion Planning application (11.1.1.4) to a complete other environment (due to the split of the companies). I have read most post on otn, but unfortunately nothing that helped me to solve the issue, yet... I hope someone can help me. Thanks in advance!
I have executed the following steps:
1. Create a new Oracle database
2. Create a datasource to the Oracle database and to Essbase (both tested succesfully)
3. Create a fresh planning application (I have used a native Admin account and not the original owner)
4. Go into the database tables for the planning app and look at table HSP_USERS, store the SID value against user 50001
5. Go into the database planning system tables and HSPSYS_APPLICATION, clear out the version field for the application you have created - I did not do this since I could not delete this value. null is not accepted.
6. Stop Planning
7. Restore the planning application database over the one created in the first step (I had to drop the existing tables first)
8. Go into the HSP_USERS table and update the SID for user id 50001
9. Start planning
10. Log on to planning and I did see the webforms, etc as expected.
11. Now, when I try to refresh the database, I receive an error:
Cube refresh/create in progress
Status failed
Step 4 Adding dimensions
java.lang.NoSuchMethodError: getAttributeType
Does anyone has an idea? Hope someone can help me since the deadline is getting closer and closer.
Thanks!
Kind Regards
Martin

Hi John,
Thanks for your reply.
I have exactly done what you have described. I droped the schema and recreated it with an impdp to import.
But, in the meantime I have been investigating the dimensions and there's indeed something very wrong. Some dimensions have been mixed up. In the 'old' environment I have 10 stored dimensions and 4 attribute dimensions (as well as in EAS as in Planning, offcourse as you expect). In the 'new' environment, two stored dimensions have been mixed up with two attribute dimensions.... How is that possible?
I have never seen that. Could this be caused by the reason that we use a different version of Oracle (11G release 2 vs 10G (10.2.0.4))? Or went something wrong with exporting the schema...? Can you tell me what I can do to investigate this?
Thanks!
Kind Regards,
Martin

Hyperion Planning 9.3.1 "Configure Data Sources" freezes at Essbase conf

Hi!
I am setting up a demo environment of Hyperion Planning for one of our customers (my first time installing this application). The platform is Windows Vista Business 32-bit. RDBMS is Oracle 10g on another machine. I've successfully installed Hyperion 9.3.1 Shared Services, Essbase, Essbase Admin Services and Planning application.
I've successfully configured all the applications (with the Configuration Utility) besides Hyperion Planning. I can access Workspace, User Management Console, Essbase Administration Services (and connect to my localhost Essbase server from there), etc - thus I believe that the installations and configuration of these modules is successful.
When I try to finish my Hyperion Planning configuration with the utility, the last step is to "Configure Data Sources" (previous configuration steps including "Product Instance Registration" were successful).
I start the configuration utility, select the properties, enter the Oracle db connection properties (no error there), then enter the Essbase connection properties (the same which enable me to add this server in the Essbase Administration Services, view and start applications, etc) and the installer just freezes.. hangs indefinitely..
Server: localhost
uid and password are the ones I provided during essbase installation/configuration
I've tried this configuration step multiple times, I've restarted the machine. The maximum time I've waited is ~30min.
Questions:
# Is it normal for the Essbase configuration page to freeze after clicking "Next" for 30min (maybe I'm just impatient, I'm new to Hyperion)
# What could be wrong?
# How could I see the error message - is there an error log somewhere?
Many thanks for your time.
Eringmae

I believe this is the error message:
Availability Date is 20051231
Exception in thread "AWT-EventQueue-0" java.lang.UnsatisfiedLinkError: no HspEssbaseEnv in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseEnv.<clinit>(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseJniOlap.<clinit>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.TestEssConnection(Unknown Source)
at com.hyperion.planning.HspDSEssbasePanelManager.TestEssConnection(HspD
SEssbasePanelManager.java:156)
at com.hyperion.planning.HspDSEssbasePanelManager.queryExit(HspDSEssbase
PanelManager.java:132)
at com.hyperion.cis.config.wizard.ProductCustomInputPanel.queryExit(Prod
uctCustomInputPanel.java:114)
at com.installshield.wizard.awt.AWTWizardUI.doNext(Unknown Source)
at com.installshield.wizard.awt.AWTWizardUI.actionPerformed(Unknown Sour
ce)
at com.installshield.wizard.swing.SwingWizardUI.actionPerformed(Unknown
Source)
at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationControlle
r.notifyListeners(Unknown Source)
at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationControlle
r.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Sour
ce)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)

Issue - login to Hyperion Planning 11.1.2.0 with admin user

Hi,
I am using Hyperion 11.1.2.0 version. I have an issue with the login to Hyperion Planning using admin credentials. The error which i am facing is "An Error occured while processing this page. Check the log for details." Please help me out.
But i am able to login to Essbase, Shared Services & Work space with the admin user.
Thanks
Dhamu

Hi john,
I went through the log file, but could not trace what is the exact issue, can you please have a look at the below log and tell me what needs to be done for corrective actions
The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
####<Oct 19, 2011 10:25:39 AM GMT+05:30> <Notice> <Security> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000139237> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Oct 19, 2011 10:25:39 AM GMT+05:30> <Notice> <Security> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000139237> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
####<Oct 19, 2011 10:25:39 AM GMT+05:30> <Info> <WebLogicServer> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000139252> <BEA-000307> <Exportable key maximum lifespan set to 500 uses.>
####<Oct 19, 2011 10:25:39 AM GMT+05:30> <Info> <Server> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000139424> <BEA-002610> <Dynamic Listener Service initialized.>
####<Oct 19, 2011 10:25:39 AM GMT+05:30> <Notice> <Server> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000139424> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 127.0.0.1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
####<Oct 19, 2011 10:25:39 AM GMT+05:30> <Notice> <Server> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000139424> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
####<Oct 19, 2011 10:25:39 AM GMT+05:30> <Notice> <Server> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000139424> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.47.33.205:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
####<Oct 19, 2011 10:25:39 AM GMT+05:30> <Notice> <Server> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000139424> <BEA-002613> <Channel "Default" is now listening on 10.47.33.205:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
####<Oct 19, 2011 10:25:39 AM GMT+05:30> <Notice> <WebLogicServer> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000139440> <BEA-000330> <Started WebLogic Managed Server "Planning0" for domain "EPMSystem" running in Production Mode>
####<Oct 19, 2011 10:25:39 AM GMT+05:30> <Info> <Server> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000139549> <BEA-002635> <The server "AdminServer" connected to this server.>
####<Oct 19, 2011 10:25:40 AM GMT+05:30> <Info> <JMX> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000140065> <BEA-149511> <Established JMX Connectivity with the Adminstration Server AdminServer at service:jmx:t3://10.47.33.205:7001/jndi/weblogic.management.mbeanservers.domainruntime.>
####<Oct 19, 2011 10:25:42 AM GMT+05:30> <Notice> <WebLogicServer> <Korbsbvm19> <Planning0> <Main Thread> <<WLS Kernel>> <> <> <1319000142158> <BEA-000365> <Server state changed to RUNNING>
####<Oct 19, 2011 10:25:42 AM GMT+05:30> <Notice> <WebLogicServer> <Korbsbvm19> <Planning0> <Main Thread> <<WLS Kernel>> <> <> <1319000142174> <BEA-000360> <Server started in RUNNING mode>
####<Oct 19, 2011 10:26:34 AM GMT+05:30> <Info> <ServletContext-/HyperionPlanning> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1319000194845> <BEA-000000> <JspServlet: param verbose initialized to: true>
####<Oct 19, 2011 10:26:34 AM GMT+05:30> <Info> <ServletContext-/HyperionPlanning> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1319000194845> <BEA-000000> <JspServlet: param packagePrefix initialized to: jsp_servlet>
####<Oct 19, 2011 10:26:34 AM GMT+05:30> <Info> <ServletContext-/HyperionPlanning> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1319000194845> <BEA-000000> <JspServlet: param compilerclass initialized to: null>
####<Oct 19, 2011 10:26:34 AM GMT+05:30> <Info> <ServletContext-/HyperionPlanning> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1319000194845> <BEA-000000> <JspServlet: param compileCommand initialized to: javac>
####<Oct 19, 2011 10:26:34 AM GMT+05:30> <Info> <ServletContext-/HyperionPlanning> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1319000194845> <BEA-000000> <JspServlet: param compilerval initialized to: javac>
####<Oct 19, 2011 10:26:34 AM GMT+05:30> <Info> <ServletContext-/HyperionPlanning> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1319000194845> <BEA-000000> <JspServlet: param pageCheckSeconds initialized to: -1>
####<Oct 19, 2011 10:26:34 AM GMT+05:30> <Info> <ServletContext-/HyperionPlanning> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1319000194845> <BEA-000000> <JspServlet: param encoding initialized to: null>
####<Oct 19, 2011 10:26:34 AM GMT+05:30> <Info> <ServletContext-/HyperionPlanning> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1319000194845> <BEA-000000> <JspServlet: param superclass initialized to null>
####<Oct 19, 2011 10:26:34 AM GMT+05:30> <Info> <ServletContext-/HyperionPlanning> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1319000194845> <BEA-000000> <JspServlet: param workingDir initialized to: C:\Documents and Settings\admin\Local Settings\Temp\1\admin\servers\Planning0\tmp\_WL_user\PLANNING_11.1.2.0\3i5tnd>
####<Oct 19, 2011 10:26:34 AM GMT+05:30> <Info> <ServletContext-/HyperionPlanning> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1319000194845> <BEA-000000> <JspServlet: initialization complete>
####<Oct 19, 2011 10:30:56 AM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000456074> <BEA-320143> <Scheduled 1 data retirement tasks as per configuration.>
####<Oct 19, 2011 10:30:56 AM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000456090> <BEA-320144> <Size based data retirement operation started on archive HarvestedDataArchive>
####<Oct 19, 2011 10:30:56 AM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000456090> <BEA-320145> <Size based data retirement operation completed on archive HarvestedDataArchive. Retired 0 records in 0 ms.>
####<Oct 19, 2011 10:30:56 AM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000456090> <BEA-320144> <Size based data retirement operation started on archive EventsDataArchive>
####<Oct 19, 2011 10:31:18 AM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000478933> <BEA-320145> <Size based data retirement operation completed on archive EventsDataArchive. Retired 22 records in 22,843 ms.>
####<Oct 19, 2011 10:39:00 AM GMT+05:30> <Info> <JDBC> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000940034> <BEA-001128> <Connection for pool "EPMSystemRegistry" closed.>
####<Oct 19, 2011 10:39:00 AM GMT+05:30> <Info> <JDBC> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319000940049> <BEA-001128> <Connection for pool "EPMSystemRegistry" closed.>
####<Oct 19, 2011 11:30:56 AM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319004056833> <BEA-320143> <Scheduled 1 data retirement tasks as per configuration.>
####<Oct 19, 2011 11:30:56 AM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319004056943> <BEA-320144> <Size based data retirement operation started on archive HarvestedDataArchive>
####<Oct 19, 2011 11:30:56 AM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319004056943> <BEA-320145> <Size based data retirement operation completed on archive HarvestedDataArchive. Retired 0 records in 0 ms.>
####<Oct 19, 2011 11:30:56 AM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319004056943> <BEA-320144> <Size based data retirement operation started on archive EventsDataArchive>
####<Oct 19, 2011 11:31:37 AM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319004097555> <BEA-320145> <Size based data retirement operation completed on archive EventsDataArchive. Retired 24 records in 40,596 ms.>
####<Oct 19, 2011 12:30:56 PM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319007656183> <BEA-320143> <Scheduled 1 data retirement tasks as per configuration.>
####<Oct 19, 2011 12:30:56 PM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319007656183> <BEA-320144> <Size based data retirement operation started on archive HarvestedDataArchive>
####<Oct 19, 2011 12:30:56 PM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319007656199> <BEA-320145> <Size based data retirement operation completed on archive HarvestedDataArchive. Retired 0 records in 32 ms.>
####<Oct 19, 2011 12:30:56 PM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319007656199> <BEA-320144> <Size based data retirement operation started on archive EventsDataArchive>
####<Oct 19, 2011 12:31:04 PM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319007664355> <BEA-320145> <Size based data retirement operation completed on archive EventsDataArchive. Retired 24 records in 8,156 ms.>
####<Oct 19, 2011 1:30:56 PM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319011256083> <BEA-320144> <Size based data retirement operation started on archive HarvestedDataArchive>
####<Oct 19, 2011 1:30:56 PM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319011256083> <BEA-320143> <Scheduled 1 data retirement tasks as per configuration.>
####<Oct 19, 2011 1:30:56 PM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319011256083> <BEA-320145> <Size based data retirement operation completed on archive HarvestedDataArchive. Retired 0 records in 0 ms.>
####<Oct 19, 2011 1:30:56 PM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319011256083> <BEA-320144> <Size based data retirement operation started on archive EventsDataArchive>
####<Oct 19, 2011 1:31:06 PM GMT+05:30> <Info> <Diagnostics> <Korbsbvm19> <Planning0> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1319011266520> <BEA-320145> <Size based data retirement operation completed on archive EventsDataArchive. Retired 24 records in 10,437 ms.>
Thanks
Dhamu

Hyperion Planning Last Login Date

Hello Everyone,
I have a requirement where in I need to track the usage of the Hyperion Planning application. I need to build a list of inactive or dormant users and clean them up from the application.
In order for me to achieve this, I need the Last Login date into the Hyperion Planning application.
I read about something called Usage Tracking that needed to be turned on. A records gets added into the hsp_audit_records table.
Can someone throw some more light on this ? My requirement is to track the planning apps usage and clean up inactive users.
Thanks
RS

Hi,
we have the same issue: some new users every week and a lot of users not using planning anymore- depending on their always changing role in the company.
only helpful logfile we use to identify inactive/old users is: hbrlaunch.log - it logs the username and the businessrules, they execute.
maybe you regard this approach as a helpful workaround (provided your users run businessrules at all)
users, who run only financial reporting or who open only planning forms to passively review budgets (we have that a lot) , we would delete accidentially by this approach, because if you never save data, you never execute a businessrule attached to a webform.
but what about following approach:
you create a very small webform called "Confirm my user access", add a very small businessrule named "Confirm user access", which calculates almost nothing and you attach the rule to the form, give access to all users AND use option: "run on load"
by this, the rule get's executed on opening the webform already - you could even show a member in the webform with name "Thanks for confirming your user account - it will remain active"
Only disadvantage: you need to write a mail to all users and explicitly ask them to open that webform and confirm the user access. (Maybe you like that approach)
Alternative might me that you attach the businessrule to the/those webform(s) - especially read-only webforms, where people don't save data or execute businessrules and which are opened most often by all users and don't tell them about that method at all.
You then should get a pretty complete overview of your active users (userid's only I am afraid ) in hbrlaunch.log
in addition, financial reporting has a logfile as well, so you could combine the usage of financial reporting and planning (provided you use it)
pls. note, that the early 9.3.1 financial reporting versions have a bug and the logfile is empty= useless
Assuming you use shared services, you probably have to attach your users into several groups- it maybe helpful to first remove the user from one central group, which blocks their access to planning application or takes the right to open planning forms- you then start your forecast, wait for their complaints and delete them 3 months later completely from all security groups - could save you some work on re-creating their access.
We use the apache http-webserver - you can modify it, so that it's logging all datatransfer - you get there the IP-Adress and the requested application (Hyperion Planning) and the requested webforms logged - but no username.
In the eas console, we see the last logindate, which seems to show the last date, a user requested a financial report against essbase.
We use that information in combination with hbrlaunch.log form businessrules.
we have the hsp_audit_trail switched on for all options-
data: it stores all member, user and time information for every single saved value in the database - so we have between 500.000 and 1 Mio entries - it's especially useful, when your essbase crashes and your backup is a few hours old- you then can use that information to upload the remaining data-entries via smartview/exceladdin - provided you have some hours time to prepare the values in excel.
hspaudittrail useful as well when it comes to discussion, who entered which numbers when.
tracking of businessrule execution: should deliver same results as hbrlaunch.log
other changes being tracked should be meaningless for your requirement, as it tracks the work of the admin-person (Dimensions, Members, Usergroups, Webforms)
regards
Rodian
Edited by: Rodian Abel on 01-Apr-2010 12:20
Edited by: Rodian Abel on 01-Apr-2010 12:33

Hyperion Planning business rules migrating to Calc Manager issue

It was suggested I post this in calc manager as well, so I hope cross posting is allowed!
We are trying to migrate from Hyperion Planning 11.1.1.3 to 11.1.2.2
Our business rules were migrated to Calc Manager by our IT team. The rules run (for the most part).
Our main complaint about this migration is that it excluded our comments inside the business rules and added it's own!
When we first open the rule it is in graphical mode. But on the Script Tab I can see our orignal Business rule, but it's missing comments. Not all comments -- those at the top of the rule are intact, but after it starts getting into the meat of the rule, it loses many, but not all of the comments. When I chose to edit this rule in script mode, then calc manager adds tons if its own comments, making the code very junky to read.
So, multiple questions -- how do we get the migration of business rules to calc manager to stop losing our important comments. Is it possible to get the newly migrated rules to initially open in script mode rather than graphical mode so that it doesn't add it's own comments. Or is there a way to turn off the added commenting?
This is a snippet of our rule in 11.1.1.3:
FIX ("D0P000 Pushdown")
"Accrued Salaries and Wages Pushdown" = "BTL Accrued Sal & Wages Total"->"WBS_I19990_PLAN" * (D0P000->"Total Reg Labor" / "LMSS (LRP TEMPLATE LEVEL)"->"Total Reg Labor");
ENDFIX
/* FIX on account members that should be rolled up in the AGG statement below. */
FIX (@DESCENDANTS( "Orders"),
This is what it looks like when it comes up in graphical mode in Calc Mgr 11.1.2.2 (note that comment is already missing):
FIX ("D0P000 Pushdown")
"Accrued Salaries and Wages Pushdown" = "BTL Accrued Sal & Wages Total"->"WBS_I19990_PLAN" * (D0P000->"Total Reg Labor" / "LMSS (LRP TEMPLATE LEVEL)"->"Total Reg Labor");
ENDFIX
FIX (@DESCENDANTS( "Orders"),
This is what it looks like when it switches from graphical to script (bonus comments are added):
FIX ( /*DIM:Entities*/"D0P000 Pushdown")
/*STARTCOMPONENT:FORMULA*/
"Accrued Salaries and Wages Pushdown" = "BTL Accrued Sal & Wages Total"->"WBS_I19990_PLAN" * (D0P000->"Total Reg Labor" / "LMSS (LRP TEMPLATE LEVEL)"->"Total Reg Labor");
/*ENDCOMPONENT*/ ENDFIX
FIX ( /*DIM:Accounts*/@DESCENDANTS( "Orders"),
Thanks for any help.
Brenda

You might learn to appreciate graphical mode in Calc Manager, we do. It is not like the old Business Rules in EAS. I am an old school calc script person, and have NO love for drag-and-drop coding ... I need control. ;-)
Insert a blank script object and paste your code into the 'Script' tab for that object. Set up your prompts and use the {} notation in your code. All of the comments will stay put ... as long as you DON'T USE EDIT, SCRIPT! We make a fair number of generic, reusable pieces of code and save them as shared scripts. These can be dragged into Rules. Click on the Rule's Begin object and choose the Script tab ... you will see how the bits are assembled into complete calc script. We've even come up with a way to use LOOP ... ENDLOOP as though it were a procedural IF statement so we can control whether or not a chunk of code is active or not.
Shared scripts are especially good for currency translation components since we occasionally add new currencies and want to make a change in one object that is used in dozens of business rules.
Mike H.

Hyperion Planning Information

Hi,Iam new to Hyperon Planning Implementation. My Company is going for implementation. We already have Essbase cubes. I wanted to know how exactly Hyperion Planning is related to hyperion Essbase. Is there any Documentation I can get & probably architecture. Typically for a medium sized company how many months will it take for a Hyperion Planning Implemenatation and also Data Loading ...how is this done,, currently we are loading data in Essbase cubes using flat files... what are the main things that We need to focus on implemenatation. Also what is the latest Version available in the market.Is there any reporting tool tht can work with Hyperion Planning???Thanks in advance for your response EssbaseUser123

How does Planning Relate to Essbase!Planning is a tool for creating and amending Applications and Databases within Essbase. It also provides a method of accessing the data via webbrowsers and controls the edit and view access to Planning Units (Budget, Version, Year combinations as a simplistic view). The full detail can be seen on their website if you look for the Demos (www.hyperion.com).Planning uses a RDBMS to store structures, security information and other data about the Essbase application which is then used to create or amend the Essbase Application / Database. All measures are held in Essbase.You can create dataloads and outline loads (as you can in Essbase) by using Hyperion Application Link (HAL). Amending the Essbase Application directly will not feed back into Hyperion Planning but HAL looks easy enough.I think the question "how long to implement" is a bit like how long is a piece of string! Depends on if you know what you want, how many people there are to train etc etcThis is only a brief explanation but I hope it helps a bit.Rik

ODI Hyperion Planning Reverse Transaction The Screen freeze and Hang

Hi,
There is a problem with reverse transaction via RKM Hyperion Planning KM.
In desinger application I will click reverse button, the application is hang up and the screen is freezed.
I completed the setup steps.
How can be solved the problem?
thanks.

Sql server is pretty much the same set up as SQL server, you could have a read here
Cheers
John
http://john-goodwin.blogspot.com/

Improve web form performance of Hyperion Planning

Hi all,
I am not sure whether anyone has tried the recommended method from Oracle to compress the web forms used in Hyperion Planning so as to improve the network perfromance?
http://download.oracle.com/docs/cd/E12032_01/doc/epm.921/html_hp_admin/frameset.htm?/docs/cd/E12032_01/doc/epm.921/html_hp_admin/hpamin-19-17.htm
Slow Performance When Opening Data Forms Using a Dial-Up Connection
Scenario:
Opening a data form using a slow network connection (for example, with a modem) takes a long time.
Solution:
You can significantly increase the network bandwidth when opening data forms by modifying the web.xml file, as described in this section. This solution compresses by approximately 90% the data stream sent from the Planning server to the client.
Note: If you are using a WebLogic (all supported versions) Web application server, complete the second procedure, which is specific to WebLogic. If you are using any other Web application server, complete the first procedure, which contains general instructions.
To modify the web.xml file to improve performance, for any Web application server except WebLogic:
1 With a text editor, open the web.xml file, located in HyperionPlanning.ear or HyperionPlanning.war.
2 After the tag </description> and before the tag <listener>, insert the following lines:
<filter>
<filter-name>HspCompressionFilter</filter-name> <filter-
class>com.hyperion.planning.HspCompressionFilter</filter-class>
<init-param>
<param-name>compressionThreshold</param-name>
<param-value>2048</param-value>
</init-param>
<init-param>
<param-name>debug</param-name> <param-value>1</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>HspCompressionFilter</filter-name>
<url-pattern>/EnterData.jsp</url-pattern>
</filter-mapping>
3 Save the web.xml file.
If you are using WebLogic, you must manually modify the .ear file and redeploy it for the Web application server.
To improve performance with a WebLogic application server:
1 Unzip the HyperionPlanning.ear file to C\:ear, for example.
2 Unzip Hyperion.war under C:\ear to C:\war.
3 With a text editor, open the C:war\WEB-INF\web.xml file and modify it using the instructions in step 2 in the preceding procedure.
4 Compress the content in C:\war to C:\ear\HyperionPlanning.war.
5 Compress the content in C:\ear into C:ear\HyperionPlanning.ear
6 Deploy the new HyperionPlanning.ear for the WebLogic Web application server.

Hi,
Yes we did this with a bank which had branches connected to the servers via dial-up. They were complaining about the amount of data being transferred in between branches and servers. This has worked well over there and increased the data transfer performance considerably. However, nowadays the performance bottlenecks are not generally due to the amount of data being transferred over the network but the javascript components that should run on client and heavy calculation/data and report creation processes.
Cheers,
Alp

Hyperion Planning Urgent

Hi,
We have a planning application which was working fine since yesterday. When I was working in shared services on user rights, i was able to provision few new users.
After completing this process I tried to login into the Hyperion Planning Application but i got an error "Failed to sync with user provisioning. Check Planning log for details" However I am able to login with "admin" in planning but could not see planning forms because of non-availability of outline and variables in essbase.
I went into essbase to further investigate and noticed that there was no outline in essbase for the planning applocation.
I also tried to push the outlin from planning but it says that " verify that hyperion essbase is running and check your network connections"
I also restarted all the services but with no success.
Please help as this is urgent and we are into UAT phase and moving to production.
Thanks

We are not using Maxl for any purpose in here and we are not sure how to use it as well....one more thing which is quite visible in my logs is
Unable to create connection for the pool: com.hyperion.planning.olap.EssbaseException (1051293)
Can not get OLAP connection: java.lang.Exception: No object were successfully created. This can be caused by any of the following: The OLAP Server is not running, The DBMS is not running, the DBMS is running on a different machine that the one specified, the name and password provided were incorrect.
com.hyperion.planning.olap.NoAvailableOlapConnectionsException: Unable to obtain a connection to Hyperion Essbase. If this problem persists, please contact your administrator.
Unable to create connection for the pool: com.hyperion.planning.olap.EssbaseException (1051293)
Can not get OLAP connection: java.lang.Exception: No object were successfully created. This can be caused by any of the following: The OLAP Server is not running, The DBMS is not running, the DBMS is running on a different machine that the one specified, the name and password provided were incorrect.
com.hyperion.planning.HspRuntimeException: Failed to sync with user provisioning. Check Planning log for details

Is there a complete demo on Hyperion Planning?

Similar Messages

Maybe you are looking for