Is there a complete list of gestures anywhere?
Gestures are mentioned in the User Guide, but I would like to find a complete list.
For example, what is the difference between a swipe and a flick.
And what is a long tap? Is that the same as touch and hold?
This is just one tutorial I found by googling 'iPad gestures ', there are many more.
http://www.youtube.com/watch?v=-uy_yrXGExM
And this one.......
http://www.youtube.com/watch?v=oN5BpvrCxvo&feature=related
Similar Messages
-
Changes from iWeb 08 to iWeb 09 - is there a complete list anywhere?
Hi all -
I just upgraded from '08 to '09. Before I start mucking around too much, I'm wondering if there is a complete list of the changes out there somewhere.
Thanks,
roxpatWhat a flippin' disaster. You were correct, Roddy. I updated one page on my website - the front page (very poor decision) - and iWeb 09 completely screwed it up. The WSYIG concept is totally gone from iWeb 09. Everything looked fine in iWeb itself, but when I uploaded it to the server the paragraphs were spaced differently, text boxes were larger than they should be and were placed differently than what they showed up as in iWeb itself. I spent a good hour just trying to make it look decent again.
This weekend I will revert back to iWeb 08 until I hear that 09 is working properly. Boooooooo Mac - what were you thinking??? -
Touchscreen customization? or complete list of gestures?
Hi, I'm enjoying my new Yoga 2 13. While browsing in tablet mode, I apparently made a gesture that made my browser go "back" which seems like something I'd like to do often. Where can I find a complete list of touchscreen gestures available on my model -- the user guide just lists "popular" ones, and Win 8 resources seem generic. Or if not, is there a way I can customize gestures like assigning hotkeys? Thanks.
Just search on Google for 'List of Windows 8 gestures'. There are plenty to choose from.
But to answer your question, you are putting your finger somewhere on the left side of your screen and swiping towards the left edge of your screen, that makes your browser to go to the previous page.
If you swipe towards the right edge of your screen, you will go to the next page.
If you swipe from the left or right edge to the middle you can switch tasks.
To bring up the charms bar on the right: swipe from the right edge of the screen to the middle but immediately swipe back to the right edge.
To see which programs are open, you swipe from the left edge of the screen towards the middle and then you swipe back to the left edge in one fluent move.
I will write a complete guide for you and others as soon as I find some time to do it. I hope explaining it in words made clear what you were doing 'wrong'.
Jonas
Microsoft MVP: Windows Consumer Expert
Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
Twitter: @jonashendrickx -
This question is in the wrong place but I could not find a better place for it. Can this issue be forwarded to someone who can fix it?
The support site is missing many relevant keyboard shortcuts such as move to the address bar = C^l, move to the search bar = C^k and formerly C^e (the lack of this one is what set me on the search for shortcuts). Is there a way to expose the hotkeys in the application?
The email address used in this account is not monitored and I won't be back to check this.This list is more complete and was updated on 02/20/2011. <br />
http://www.mvps.org/dmcritchie/firefox/keyboard.htm
It has the new keyboard 4.0 command for Panorama, but I didn't verify that list is as complete as I know the keyboard shortcuts - but a quick glance looks like it is. -
Is there a complete list of the status bar icons somewhere?
I just received a Flame phone and have an icon in the status bar that I can't decipher: a "2" followed by what I think is a SIM card graphic, followed by a "!" - I have a SIM card in slot #1 but I am wondering if there is a problem with it. I checked the help pages and I don't see a topic that describes the different icons. Please let me know if I need to fix something. Thanks.
It's a bug. Means that a second Sim is not installed, but really it should not show at all.
-
Appears to be hit or miss in finding for movies to rent.
Some are available to rent and some are not.
Is there a complete list of all available Movies for Rent?Go to the main iTS home page via the iTunes interface - select 'Browse' from the Quick Links on the upper right side of the page - select 'Movies' - select a genre of movie - look at the list - movies that have 'view movie' are for rent or can purchase.
MJ -
Complete list of class IDs and names
Is there a complete list of all the built-in class IDs with their corresponing names?
I have looked at the LV2012 Class ID Property help page located here: http://zone.ni.com/reference/en-XX/help/371361J-01/lvprop/gen_class_id/, but this is incomplete. For example, the RadioButtonsControl has an ID of 72 and is not listed.
Or better yet, are there any VIs out there that can convert a U32 ID value into the corresponding class name?
Solved!
Go to Solution.I've taken Paul's VI and expanded it to loop through a few hundred numbers and ignore any errors. I've also downcasted it to 2009 for you. Hopefully this is the complete list you're looking for.
Value 1 = Application
Value 2 = VI
Value 3 = Generic
Value 4 = Decoration
Value 5 = Text
Value 6 = Control
Value 7 = ColorBox
Value 8 = Boolean
Value 9 = RefNum
Value 10 = LVVariant
Value 11 = Path
Value 12 = ListBox
Value 13 = Table
Value 14 = Array
Value 15 = Picture
Value 16 = ActiveXContainer
Value 17 = Numeric
Value 18 = Digital
Value 19 = NamedNumeric
Value 20 = ColorRamp
Value 21 = Slide
Value 22 = GraphChart
Value 23 = WaveformChart
Value 24 = WaveformGraph
Value 25 = IntensityChart
Value 26 = IntensityGraph
Value 27 = String
Value 28 = IOName
Value 29 = ComboBox
Value 30 = Cluster
Value 31 = Panel
Value 32 = Knob
Value 33 = NumericWithScale
Value 34 = Ring
Value 35 = Enum
Value 36 = GObject
Value 37 = Plot
Value 38 = Cursor
Value 39 = NumericText
Value 40 = Scale
Value 41 = ColorScale
Value 42 = GraphScale
Value 43 = ColorGraphScale
Value 44 = TypedRefNum
Value 45 = Generic
Value 46 = MulticolumnListbox
Value 47 = WaveformData
Value 48 = DSCTag
Value 49 = DAQChannelName
Value 50 = VISAResourceName
Value 51 = IVILogicalName
Value 52 = SlideScale
Value 53 = PageSelector
Value 54 = Page
Value 55 = TabControl
Value 56 = ConnectorPane
Value 57 = DAQmxName
Value 58 = VIRefNum
Value 59 = LVObjectRefNum
Value 60 = AbsTime
Value 61 = DigitalTable
Value 62 = SubsystemVI
Value 63 = Generic
Value 64 = Generic
Value 65 = SubPanel
Value 66 = TreeControl
Value 67 = GenClassTagRef
Value 68 = GenClassRef
Value 69 = RotaryColorScale
Value 70 = PlugInControl
Value 71 = PlugInDDODummyContainer
Value 72 = RadioButtonsControl
Value 73 = Project
Value 74 = ProjectItem
Value 75 = Pane
Value 76 = Splitter
Value 77 = BuildSpecification
Value 78 = Pixmap
Value 79 = FacadeVI
Value 80 = Library
Value 81 = Variable
Value 82 = TagSet
Value 83 = XYGraph
Value 84 = SceneWindow
Value 85 = LVClassLibrary
Value 86 = Generic
Value 87 = MethodVI
Value 88 = XControlLibrary
Value 89 = XNodeLibrary
Value 90 = Scrollbar
Value 91 = LVTarget
Value 92 = MixedSignalGraph
Value 93 = Provider
Value 94 = CopyOperation
Value 95 = TargetItem
Value 96 = ProjectItemType
Value 97 = CopyItem
Value 98 = CopyConflict
Value 99 = CopyExpert
Value 100 = SceneGraphDisplay
Value 101 = PolymorphicVI
Value 102 = LabVIEWClassControl
Value 103 = XInterfaceLibrary
Value 104 = SceneNode
Value 105 = SceneObject
Value 106 = SceneLight
Value 107 = Generic
Value 108 = Generic
Value 109 = Generic
Value 110 = SceneClipPlane
Value 111 = SceneTexture
Value 112 = SceneGeometry
Value 113 = SceneBox
Value 114 = SceneCone
Value 115 = SceneCylinder
Value 116 = SceneHeightField
Value 117 = SceneSphere
Value 118 = SceneMesh
Value 119 = XPropertyFolder
Value 120 = PropertyFolder
Value 121 = DigitalGraph
Value 122 = GenClassTagFlatRef
Value 123 = Scene
Value 124 = Generic
Value 125 = LibraryData
Value 126 = StatechartLibrary
Value 127 = MixedCheckbox
Value 128 = SceneDrawable
Value 129 = SceneText
Value 130 = MultiSegmentPipe
Value 131 = Bus
Value 132 = StubDDO
Value 133 = ProjectFilesViewItem
Value 134 = LVClassPropDefFolder
Value 135 = DataValRefNum
Attachments:
Get Name from Class ID.vi 7 KB -
Is there any way to have a COMPLETE list of all samples and loops ( Logic 8
I'm sure it's been posted previously, but anyway, I'm looking to buy new Apple Loops libraries and I have faced the fact , that many of the sounds and loops produced by third parties manufacturers have been already included in Logic installation discs.
I have a list of Apple Loops DVD's that have been included with Logic somewhere, the problem is, Apple didn't post ( I believe) the credits of all 3rd party manufacturers that have produced these libraries that are included with Logic or Garage band. Is there any way to have a COMPLETE list of all samples and loops that are included with Apple DAW's so I wouldn't duplicate anything ? I'm pretty much positive that Apple had other companies to sound design and sample all libraries for them, so is there also a way to have a list of those manufacturers? Again, the objection is to start upgrading the sound library without any possible duplication?
Thanks in advance!Chris, I certainly don't mind additional questions and postings.
I believe there are many issues with Apple Loops and Logic that need to be resolved and people need to be aware of that. Unfortunately, in opposite to the old "german" version of Logic , there's no lifetime tech support, you can't even call and ask the question after 60 days , which isn't right for a professional software of this level, especially considering the fact that many things still remain vague in Logic even for developers and tech support people!( believe me, I've called and asked!)
Issues like that need to be resolved over the phone with the company, period!
One thing I also learned over the years as a Mac OSX user, if something doesn't work, don't mess with it. Delete your drive and re-install everything. This is very frustrating , I know, but unfortunately this is the only way to deal with OSX issues, if you got a problem with your system, don't try to fix it. It's never gonna be the same again. I know , it's off the topic a little bit, but if your content is missing from the system files, before installing your new Logic, back up your important files, wipe up your drive and clean install Mac OSX , run updates and then install the Logic. Most likely , everything will be in it's place, at least 90% or more. I gave up trying to make two system in my house to be compatible 100% , but it's OK if they're 90% or more identical. I spent enormous amount of time trying to find out what's missing and where, I visited most of the forums and there's no clean answer.
Message was edited by: Moderator -
My bookmark glasses icon is missing as well as the bookmark icon from preference pane. There is no + sign to add to the reading list. The reading list is still there although completely grey colour and all the pages have the same blue icon. Can anyone advise how to fix this problem? Mac os x 10.7.5 Safari 6.1.
My bookmark glasses icon is missing as well as the bookmark icon from preference pane. There is no + sign to add to the reading list. The reading list is still there although completely grey colour and all the pages have the same blue icon. Can anyone advise how to fix this problem? Mac os x 10.7.5 Safari 6.1.
-
Looking for complete list of attributes to search on in Mail Search field
I have been digging for hours and other than the few examples in Mail's help file, I can't find a complete list of attributes to search on when doing ad-hoc searches in Mail's search field.
The ones I know of are to:, author:, subject:, kind:, date:, size:, modified:
There are also quite a few synonyms like from:, by:, to:, recipient:, etc.
But where is the complete list? Arghh!!
Any pointers would be much appreciated, or maybe folks can just append the keywords they know to work here?
I'd love to find one that does the equivalent of mailbox:foldernameLaunch Script Editor (in /Applications/AppleScript/), paste in this script, select Event Log, run it, and get Mail's properties:'
tell application "System Events"
get properties of application "Mail"
end tell
Alternatively, Script Editor->Window->Library-> add Mail's dictionary to the listing and then double-click on it. -
Complete list of settings in Profile Manager
Hi!
I'm looking for a complete list of the settings available in the Profile Manager for iOS devices.
Restrictions
Push Apps
Push books and PDF's
Passcode policy
etc. etc.
So, is there a list out there with all the settings and features of Profile Manager with iOS?
Thanks!Apple has a good developer page on most of the payloads:
https://developer.apple.com/library/ios/featuredarticles/iphoneconfigurationprof ileref/introduction/introduction.html
Sadly, Apple does not provide many examples nor a clear explanation of the management levels. But this is a great reference and now it includes OS X payloads, despite the URL name. Sadly, not all profiles are listed yet but Apple seems to be revising the document.
Reid
Apple Consultants Network
Author "Yosemite Server – Foundation Services" :: Exclusively available in Apple's iBooks Store
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store
Author "Mavericks Server – Control and Collaboration" :: Exclusively available in Apple's iBooks Store -
Print Completed list not sorted correctly
When I try to check the Completed list, it seems to be sorted numerically instead of by date. For example if I sort for most recent printouts first I get:
5/8/09 9:56 AM
5/7/09 9:10 AM
5/4/09 2:52 PM
5/18/09 10:40 AM
5/11/09 11:57 AM
5/1/09 9:43 AM
4/9/09 9:36 AM
4/30/09 4:31 PM
The most recent ones are midway down. Is there a way to tell it to sort the most recent printouts at the top?Hi Roger,
Where are you getting this list from, or how are you generating it?
First, you'd have to give the Month & Days a 2 digit number... a zero before a 1 digit date.
How I'd do it is with Tex-Edit Plus...
http://www.tex-edit.com/
Paste your list in it, Select All, Tools menu>Sort Descending, Print.
05/18/09 10:40 AM
05/11/09 11:57 AM
05/08/09 9:56 AM
05/07/09 9:10 AM
05/04/09 2:52 PM
05/01/09 9:43 AM
04/30/09 4:31 PM
04/09/09 9:36 AM -
Term Store missing complete list of terms
In my Term Store Management Tool, when I expand a Term Set, it is not listing all terms. It used to list the complete list of terms, but just recently it doesn't . The down arrow is missing where you would click to see the rest of
the terms. It only lists the first 10 terms.
Anyone know how to fix this to be able to see the complete list of terms?
I know they are still there, as I can see all the terms when I upload a document (metadata choices).
thanks!Hi,
According to your post, my understanding is that you can’t see the down arrow to view the rest terms which are more than 10.
In my environment, I also do this test and the result is that it works well.
Per my knowledge, it’s by design that the terms only can show the top 10 terms under a term set, then you can click on the drop arrow to view rest terms which are more than 10.
You can try to create a new Term Set or a Group, and separately do this test again to check if this issue only occurs on this term set.
What is your current browser? I recommend that you can change some different browsers to check if this issue only occurs on your current browser.
If you are using the IE browser, you can change the IE browser mode using F12, change to different mode, then check whether it works.
You can try to clear the browser cache and run the IE in safe-mode again to test if it works.
Also, I suggest that it’s better to use the IE 8 browser for SharePoint 2010.
And, does this issue occurs after you install any update in your environment?
I recommend that you can try to install the latest update in your environment to check if it works.
Best Regards,
Yumi Fu -
have figured out a few already (ln(x), log(x), x^y, sin(x), asin(x), sinh(x), asinh(x), sqrt(x), pi(x), exp(x) ) but a complete list would be very useful. At the moment I am trying to figure out if it can handle factorials (x!). Any ideas? I am using LV6i.
have figured out a few already (ln(x), log(x), x^y, sin(x), asin(x), sinh(x), asinh(x), sqrt(x), pi(x), exp(x) ) but a complete list would be very useful. At the moment I am trying to figure out if it can handle factorials (x!). Any ideas? I am using LV6i.Such a list is in Chapter 1 of the "G Math Toolkit Reference Manual". Please note that there are some differences to the formula node. Therefore, the help on the formula node lists some functions, that do not work with the Parser VIs.
You can get the G Math manual from: www.ni.com/manuals
Just search for "math".
Hope this helps!
Robert Buhrke, Systems Engineer
Contact: [email protected] -
Function Module which gives complete list of objects that another object to
Hi All,
Is there any standard FM that can give us complete list of objects that another object(Order/Cost Center) settles to??
Thanks in advance,
PrathimaHi,
Question is not clear.
Revert back,
Regards,
Naveen
Maybe you are looking for
-
"Try Selecting a Different Printer or File Type" Error - iPad2 - Officejet Pro 8600 - ePrint error
Greetings... I just got an Officejet Pro 8600 and I've been trying to get web pages to print using HP ePrint from my iPad 2 (iOS 7.0.6). I go into the ePrint app, go to web page of choice, and then click on my printer option to print. It renders on s
-
How to reveal USB flash drive files?
Running on Maverics 10.9.3 I saved my AutoCAD files onto my USB drive a few days ago. Today, I opened my USB again and all of my files are missing. I know they're not deleted because there is used space in the USB drive. It is a 4gb flash drive and I
-
Payment to multiple vendors against a single shipment
hi, for a single shipment, multiple vendors are being paid for different services, i.e. forawrding agent, clearing services, loading services etc. so, can any1 guide me how to do that? thanks.
-
How to Validate or test SJW parameter For HS CAN Node?
Hi All, To paraphrase the Question asked in the post, If the CAN parameters for Baud rate, Tq, BRP ,Prop Seg 1, PRop Seg 2 are all programmed with proper Tq. How to test them ? I have worked on CAN Stress Tool to test Sample point of a CAN Bit for a
-
Output of Export Invoice.
Hello SAP guruu2019s The output (Printout) for export invoices which is in EUR currency is currently one Euro copy and 3 RON copies through VF02 even though smart form assigned for this out put is showing only one Euro copy and 3 RON copies. But for