Is there a comprehensive RGB guide available?

Does anyone know of a RGB color chart that I can print out
that will all allow me to view several colors side by side? I would
like to pick a color scheme for my websites. I saw a site or two
but I couldn't get the color blocks themselves to print just the
rgb code.

doh, used my bookmarks - one from before I bought it and the
other after (o:
Thanks Walt - I love it too
Jo
"Walt F. Schaefer" <[email protected]> wrote in
message
news:eob1je$idn$[email protected]..
> Jo,
>
http://www.dreamweaverresources.com/colorimpact.htm
>
http://www.tigercolor.com/Default.htm
are the same product.
>
> I use Color Impact and I love it.
>
> Walt
>
>
> "josie1one" <joleros[nospam]@yahoo.com> wrote in
message
> news:eoauvg$fi4$[email protected]..
>>I use this, it's great
>>
http://www.dreamweaverresources.com/colorimpact.htm
>>
>> then there's this
>>
http://www.colorcombo.com/
>>
>> and finally
>>
http://www.tigercolor.com/Default.htm
>>
>> --
>> Jo
>>
>>
>> "msmetts" <[email protected]> wrote in
message
>> news:eoauob$fcq$[email protected]..
>>> Does anyone know of a RGB color chart that I can
print out that will all
>>> allow
>>> me to view several colors side by side? I would
like to pick a color
>>> scheme for
>>> my websites. I saw a site or two but I couldn't
get the color blocks
>>> themselves
>>> to print just the rgb code.
>>>
>>
>>
>
>

Similar Messages

I want to know how to create accessible pages documents for visually impaired. Is there a manual or guide available?

I work for an NGO that has a lot of visually impaired staff. When I create pages documents and then export to PDF I often get feedback that the document is not very accessible. I have been searching for a manual or guide on how to ensure my documents are accessible, but cannot seem to find
I have pages 5.0.1

You need to add accessibility, after Exporting the pdf, with Acrobat Pro.
I don't know of any software except maybe Indesign or Quark XPress* that actually builds it into the pre-pdf document.
These references should help:
http://webguide.gov.au/accessibility-usability/accessibility/pdf-accessibility/
http://www.adobe.com/au/products/acrobat/pdf-accessibility-wcag-508-compliance-s tandards.html
http://www.adobe.com/accessibility/products/acrobat/training.html
Peter
* Quark Xpress definitely did not have it up to QXP 7.5 but I can find no later references, so probably it is only Indesign.

Is there any error guide available for BI Schedular??

is there any error guide available for BI Schedular??
I have scheduled a iBOT. in the instance tables it is showing the details of the instances howeverit is not showing any cache in caching. also there are some error logged in the error table.
how to get the info what is causing the error and what error it is?

hi abhi,
Did u checked the log file after scheduling the ibot
\OracleBI\server\Log\iBots
we will get Scheduler conf guide and NQSERROR code guide
thanks,
saichand

OSD Task Sequence fails with "There are no task sequences available for this computer"

Let me preface this by saying that I have read at least 100 forum posts with people having similar issues. However, none of the solutions in those
posts have worked for me.
The Problem: SCCM 2012 R2 will not image unknown computers.
The task sequence gives the error "There are no task sequences available for this computer." As soon as that error occurs, SCCM places an Unknown entry into the All Systems collection. I have been imaging unknown computers, without fail, for
4 months and no environmental changes have been made. NOTE: I am using USB media, not PXE.
What I've Tried:
Checked for duplicate SMSBIOS GUIDS in the console, none.
Checked for duplicate MAC Addresses in the console, none.
Checked for expired certificates, none.
Recreated Boot Media, twice.
Deleted the Unknown entry and retried, SCCM just recreates the Unknown entry.
Deleted all of my task sequence deployments, and then redeployed them each to All Systems (Only Boot Media and PXE) and to Unknown Systems (Only Boot Media and PXE)
I have also ran the following in the SQL Server Management Studio;
SELECT
* FROM
ResPolicyMap WHERE
machineid = 0 and
PADBID IN
(SELECT
PADBID FROM PolicyAssignment
WHERE BodyHash
IS NULL)
No result
Select
* From
vMacAddresses Where
MacAddresses = '00:00:00:00:00:00'
This displays an entry for every time that I have tried to image the unknown machine attached to the MAC Address with a different ItemKey and SMS_Unique_Identifier for each entry.
Added the machine manually using Import Computer Information, immediately recognized the Task Sequences that I have advertised to the All Systems collection.
Any and all assistance is welcome, I am going on the third straight day of dead ends. Below I have tried my best to post the entire SMSTS Log;

LOGGING: Finalize process ID set to 744
==============================[ TSBootShell.exe ]==============================
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Debug shell is enabled
Waiting for PNP initialization...
RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(1)\SOURCES\BOOT.WIM
WinPE boot path: C:\SOURCES\BOOT.WIM
Booted from removable device
Found config path C:\
Booting from removable media, not restoring bootloaders on hard drive
C:\WinPE does not exist.
C:\_SmsTsWinPE\WinPE does not exist.
Executing command line: wpeinit.exe -winpe
The command completed successfully.
Starting DNS client service.
Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
The command completed successfully.
==============================[ TSMBootStrap.exe ]==============================
Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL'
Current OS version is 6.2.9200.0
Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH
Failed to open PXE registry key. Not a PXE boot.
Media Root = C:\
WinPE boot type: 'Ramdisk:SourceIdentified'
Failed to find the source drive where WinPE was booted from
Executing from Media in WinPE
Verifying Media Layout.
MediaType = BootMedia
PasswordRequired = false
Found network adapter "Intel(R) Ethernet Connection I217-LM" with IP Address XXX.XX.XXX.XXX.
Running Wizard in Interactive mode
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Activating Welcome Page.
Loading bitmap
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Spawned thread 1008 to download policy.
Entering TSMediaWizardControl::GetPolicy.
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}
Setting LogMaxSize to 1000000
Setting LogMaxHistory to 1
Setting LogLevel to 0
Setting LogEnabled to 1
Setting LogDebug to 1
UEFI: false
Loading variables from the Task Sequencing Removable Media.
Loading Media Variables from "C:\sms\data\variables.dat"
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Setting SMSTSMP TS environment variable
Setting _SMSMediaGuid TS environment variable
Setting _SMSTSBootMediaPackageID TS environment variable
Setting _SMSTSBootMediaSourceVersion TS environment variable
Setting _SMSTSBrandingTitle TS environment variable
Setting _SMSTSCertSelection TS environment variable
Setting _SMSTSCertStoreName TS environment variable
Setting _SMSTSDiskLabel1 TS environment variable
Setting _SMSTSHTTPPort TS environment variable
Setting _SMSTSHTTPSPort TS environment variable
Setting _SMSTSIISSSLState TS environment variable
Setting _SMSTSMediaCreatedOnCAS TS environment variable
Setting _SMSTSMediaPFX TS environment variable
Setting _SMSTSMediaSetID TS environment variable
Setting _SMSTSMediaType TS environment variable
Setting _SMSTSPublicRootKey TS environment variable
Setting _SMSTSRootCACerts TS environment variable
Setting _SMSTSSiteCode TS environment variable
Setting _SMSTSSiteSigningCertificate TS environment variable
Setting _SMSTSStandAloneMedia TS environment variable
Setting _SMSTSSupportUnknownMachines TS environment variable
Setting _SMSTSTimezone TS environment variable
Setting _SMSTSUseFirstCert TS environment variable
Setting _SMSTSx64UnknownMachineGUID TS environment variable
Setting _SMSTSx86UnknownMachineGUID TS environment variable
Root CA Public Certs=
Missing root CA environment variable from variables file
Support Unknown Machines: 1
Custom hook from X:\\TSConfig.INI is
No hook is found to be executed before downloading policy
Authenticator from the environment is empty.
Need to create Authenticator Info using PFX
Initialized CStringStream object with string: 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A;2014-07-16T18:15:39Z.
Set media certificate in transport
Set authenticator in transport
CLibSMSMessageWinHttpTransport::Send: URL: XXXXXXXXX.XXXXXX.com:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA
Request was successful.
Default CSP is Microsoft Enhanced RSA and AES Cryptographic Provider
Default CSP Type is 24
New settings:
site=XXX,XXX, MP=http://XXXX.XXXX.com, ports: http=80,https=443
certificates are received from MP.
Unknown machine GUIDs: 774b17a2-6eeb-44bc-9c94-ce9081f5fe4c 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
MP specific X86 unknown machine GUID is received at run time
MP specific X64 unknown machine GUID is received at run time
Getting MP time information
Set authenticator in transport
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 406, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Current time: 2014-07-16 18:15:39.787 TZ:Pacific Standard Time Bias:0480
Current time zone info: 480, Pacific Standard Time, [0 0 0 0 0 0 0 0], 0, , [0 0 0 0 0 0 0 0], 0
Adjusting the system time: -14400.551 seconds
Time zone info set to: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
New time: 2014-07-16 14:15:39.235
Current time: 2014-07-16 14:15:39.231 TZ: Bias:0300
Downloading policy from http://XXXX.XXXX.com.
Initializing HTTP transport.
Setting URL = http://XXXX.XXXX.com.
Setting Ports = 80,443.
Setting CRL = false.
Setting Server Certificates.
Set authenticator in transport
Setting Media Certificate.
Preparing Client Identity Request.
Setting transport.
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Setting site code = XXX.
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.
Setting SMBIOS GUID = XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.
Adding MAC Address XX:XX:XX:XX:XX:XX.
Executing Client Identity Request.
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 415, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Client GUID = , Netbios name = , State = Known
Using unknown machine GUID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=TRUE
Hash computed from CSP: Microsoft Enhanced RSA and AES Cryptographic Provider, AlgID: 32772, HashSize: 20
Computed HardwareID=2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Hardware ID: 2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Preparing the Client DDR Message
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Sending the Client DDR message.
Sending Report
<Report><ReportHeader><Identification><Machine><ClientInstalled>0</ClientInstalled><ClientType>1</ClientType><Unknown>1</Unknown><ClientID>GUID:26717327-194f-4cd6-90ba-309998c058f2</ClientID><ClientVersion>5.00.0000.0000</ClientVersion><NetBIOSName>Unknown</NetBIOSName><CodePage>437</CodePage><SystemDefaultLCID>1033</SystemDefaultLCID></Machine></Identification><ReportDetails><ReportContent>Inventory
Data</ReportContent><ReportType>Full</ReportType><Date>20140716141539.000000+000</Date><Version>1.0</Version><Format>1.1</Format></ReportDetails><InventoryAction ActionType="Predefined"><InventoryActionID>{00000000-0000-0000-0000-000000000003}</InventoryActionID><Description>Discovery</Description><InventoryAc
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
Submitted new client identity: GUID:26717327-194f-4cd6-90ba-309998c058f2
Preparing Policy Assignment Request.
Setting transport.
Setting site code = XXX.
Setting client ID = 74f16942-dd75-437f-8c4b-2a5de4d0e5e5.
Setting site signing Certificate.
Setting SiteSigningCertificateContext
Executing Policy Assignment Request.
Sending RequestAssignments
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 274, uncompressed size 662.
Request client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Response client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Retrieving Policy Assignments:
Successfully read 0 policy assignments.
Retrieving collection variable policy.
Found 0 collection variables.
Retrieving machine variable policy.
Found 0 machine variables.
Setting collection variables in the task sequencing environment.
Setting machine variables in the task sequencing environment.
Exiting TSMediaWizardControl::GetPolicy.
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
No assigned task sequence.
Setting wizard error: There are no task sequences available for this computer.
Skipping Confirmation Page.
Skipping Task Sequence Selection Page.
Skipping Variables Selection Page.
Skipping Resolve Progress Page.
Activating Finish Page.
Loading bitmap
Executing command line: X:\windows\system32\cmd.exe /k
The command completed successfully.
Successfully launched command shell.

Accessing the Internet when there is no public network available

I currently have access to a public AirPort network but will be moving to an area where there is no public network. Do I need more software to create my own network ID? I read in the documentation with the AirPort Extreme disk that I may be able to use the AirPort with some ISP's. Is there a comprehensive list of ISP's who support AirPort? Thanks.

What I'm looking for is more specifc information: do I need more software (base station?
Your Mac is already set as far as software to support wireless Internet access. As a minimum, you will need either an wireless Internet gateway or an Internet modem & wireless router. Most Internet Service Providers (ISPs) offer these with their service.
and how do I determine if an ISP will accommodate my wireless needs (i.e. what question do I ask them before signing up)
Depending on where you live, ISPs can offer a number of Internet access services: ADSL/DSL, Cable, Satellite, or Wide-Area Wireless (usually found in rural areas). Performance, and cost, will vary and is usually quite competitive, especially in high traffic areas in major cities.
The first thing is to establish your requirements:
- What will you be using the Internet for? Basic needs like web surfing and/or email, or more advanced needs like running a business commerce site (like Amazon for example)? This will define your data rate requirements.
- Cost: How much are you willing to spend monthly for Internet access? This will set a boundary on what services will be available (cost-wise) to you.
- Local Area Network (LAN) requirements: Will you only be connecting a single computer to the Internet (or one computer at) or will you need to have multiple computers connected at the same time? Do you want both wired and wireless access? Do you plan on using the Internet for "Massive Online Gaming?" If you will have a multiple computer access need, does the ISP provide (or support) a NAT/DHCP-enabled router (which allows you to "share" the single IP address, provided by the ISP, amongst those computers) or will they require you to pay extra for multiple computer access?
The second thing is to determine the available ISPs for your area. The following website could go a long way in helping you answer that question.

No GUID available?

I'm new to apple and when entering my apple ID in the app store it tells me there is no GUID available and to contact support? I dont understand, who is contact support as I have browsed around and cant find any contact details? please help!

http://www.apple.com/support/mac/app-store/contact.html?form=account&topic=Mac%2 0App%20Store%20Account%20and%20Billing

Is there a faster hard drive available for the 1.83Ghz Dual Core MacMini?

Is there a faster hard drive available for the 1.83Ghz Dual Core MacMini? Since this is the slowest component of the whole system is there a way to upgrade to something faster (possibly a 7200RPM drive)?
thanks,
Jeff

Ways to make it faster:
1) Be sure you aren't running any Rosetta apps or drivers. Watch out for print drivers. You can use Utilities > Activity Monitor to spot the legacy stuff that uses Rosetta. (Make sure the pop-down menu at the top of the Activity Monitor window says "All Processes", not just "My processes".)
2) Max your RAM to 2 Gigs. You can't go to 3 Gigs since you only have the CoreDuo CPU.
3) Whatever hard drive you use, keep at least one-third of it empty. Obviously this will be easier with a large external firewire drive.
4) 3.5 inch drives will be faster than 2.5 inch drives -- even at the same RPM. So again, external will be the way to go, since Minis can only take 2.5 inch internals.
If you want an external that stacks under the Mini, some examples are here:
http://www.123macmini.com/accessories/guide/enclosures.html
(The NewerTech and WiebeTech models appear to have good reputations, though I have no personal experience with them.)
But again, all of the factors I mention above will affect performance.

Are printed versions of Aperture User Guides available??

Does anyone know if there are printed/bound versions of Aperture User Guides available, either through Apple or a 3rd party?
PDF's and the help menu are fine when you're on the computer and need a quick answer. However, I also like to have a nice book version to take and read at night, when traveling, etc...
I would certainly pay (a reasonable amount) for such a book, but when I explored getting the PDF printed/bound at a local Staples, they wanted some outrageous amount ($160 or so), due to it being in color and 400+ pages.
Ideally, I'd like a version similar to the "Getting Started" manual that came with Aperture.
Regards
Tom

I agree, as I often prefer to sit down and read the manuals away from the computer, etc..
I can understand why Apple doesn't ship printed versions in the box (extra cost, shipping, etc) and provides a free PDF instead. However, it seems like they could offer a printed version for a price on their on-line (and retail) stores for those so inclined to pay for it. They already have the manuals generated, they just need to make them available.
In the meantime, I guess we wait for someone to bring an Aperture 1.5 book to market. Problem there is that by the time someone else puts one out, Aperture will be up to rev 1.6 or something...
-Tom
Powermac Quad 2.5Ghz, 5GB, GeForce 7800GT Mac OS X (10.4.8)

HT1270 My mid 2010 MacBook Pro has the maximum 8 GB memory cards installed. Can it be upgraded to 16 GB? Are there compatible 8 GB cards available?

My mid 2010 MacBook Pro has the maximum 8 GB memory cards installed. Can it be upgraded to 16 GB? Are there compatible 8 GB cards available?

I have a similar question.. 13" macbook pro, mid 2010- having problems with spinning beach ball.. like someone from Mars has taken over the computer..   - the specs are below..   would it help if I added more RAM?   If yes, any suggestions where/ what to buy? This only started after upgrade to Mountain Lion from SNL.
MacBook Pro 13 inch mid 2010
Model Identifier:    MacBookPro7,1
Processor Name:    Intel Core 2 Duo
Processor Speed:    2.66 GHz
Number of Processors:    1
Total Number of Cores:    2
L2 Cache:    3 MB
Memory 4 GB 1067 MHz DDR3
Bus Speed:    1.07 GHz
Boot ROM Version:    MBP71.0039.B0E
SMC Version (system):    1.62f7
Graphics NVIDIA GeForce 320M 256 MB
BANK 0/DIMM0:
Size:    2 GB
Type:    DDR3
Speed:    1067 MHz
Status:    OK
Manufacturer:    0x80AD
Part Number:    0x484D54313235533654465238432D47372020
Serial Number:    0x27A0B2F9
BANK 1/DIMM0:
Size:    2 GB
Type:    DDR3
Speed:    1067 MHz
Status:    OK
Manufacturer:    0x80AD
Part Number:    0x484D54313235533654465238432D47372020
Serial Number:    0x2740B300

There are no active responsibilities available for this user

Hi Guys...
I am not technical person... but wanted to if anybody has experienced the following problem:-
When logging into any account i get the following message:- There are no active responsibilities available for this user
No i have looked the threads posted and most advise to run the WF_SYNCHRONIZE_LOCAL_TABLES concurrent request.. if i run this through toad or UNIX as i can’t get into forms i always seem to get the following message which could be playing a part in my initial problem.....ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
When i also query the following table Fnd_User_Resp_Groups i also get the following message: ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
any help would be most welcome......
Bal

Is the system in maintenance mode, by any chance ? You put the app in maintenance mode when applying patches. If you connect as the apps database user, what does this sql statement return ?
select fnd_profile.value('APPS_MAINTENANCE_MODE') from dual;
MOS Doc 400151.1 - After Login Receive Error: 'There are no active responsibilities available for this user'
If the system is not in maintenance mode, you only option would be to open an SR
HTH
Srini

After apple wiped my hard drive, my computer no longer recognizes my iphone 4. It will charge, but doesn't show up in my sidebar or in itunes. My computer says there are no software updates available. I'm running OSX 10.5.8 and itunes is 10.3.1.

After apple wiped my hard drive, my computer no longer recognizes my iphone 4. It will charge, but doesn't show up in my sidebar or in itunes. My computer says there are no software updates available. I'm running OSX 10.5.8 and itunes is 10.3.1.

After apple wiped my hard drive, my computer no longer recognizes my iphone 4. It will charge, but doesn't show up in my sidebar or in itunes. My computer says there are no software updates available. I'm running OSX 10.5.8 and itunes is 10.3.1.

When adding a printer share within Print Management receive "There are no more endpoints available from the endpoint mapper."

I've installed Server 2012 as a print server (Print server will be the only function of this server). I'm now trying to add printers. The first one I've added is a HP 2035 with the Windows update HP Universal PCL6 driver. If I chose to share the printer
during the setup I receive "There are no more endpoints available from the endpoint mapper." If I choose not to share during the setup, it adds without any issues...until I launch Properties and attempt to share it. I'm finding it doesn't seem to
matter what driver I use, whenever I share I end up with the same result. I've also tried using the PCL6 Universal Driver from HP, no change. I'e been researching this issue for hours without any change. By default, we disable firewalls on servers (Some TN
thread suggested checking to ensure the firewall is disabled). Spooler isn't crashing. I've tried adding a few others printers, running into the exact same issue. Why is trying to share the printers causing this issue?

I've seen some people state they get this error when disabling the Windows Firewall service. I've never seen the error with the service disabled but it may be the replacement software interfering.
If it's off start up the service and let us know the outcome.
Alan Morris formerly with Windows Printing Team

HT4623 I have an Apple Model MC610LL version 4.1(8B117). There is no software update available for this phone. WHY??????

I have an Apple iphone , Model MC61OLL version 4.1(8B117). There is no software update available on this phone . WHY????

boblueski wrote:
I have an Apple iphone , Model MC61OLL version 4.1(8B117). There is no software update available on this phone . WHY????
Probably because you haven't updated iTunes to version 10.7.

Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?

Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?

I have the 6500A without plus and it is with a LAN cable connected with my Router.
First make sure you have the latest printer firmware installed.
Next restart the printer and the Router.
I had the same. Problem but it went away after rebooting the Router.

HT4972 I have an iphone 4s and it's telling me that there is a software update available to iOS 6. When I got to "settings" on my phone, the "download and install" tab is not highlited and I can't click on it to get the update.

I have an iphone 4s. I have an alert that there is a software update available to iOS 6. When I got to the settings tab, the "download and install" button is not highlited and I can't click on it. Below that, it says that this update requires a Wi-Fi network connection to download. So I connected my phone to my computer and tried to update throug itunes. When I clicked the update tab on itunes on my laptop, an alert pops up that says I need to be connected to the internet for th update to take place. I am confused because I am connected to the internet, but for some reason the connection is not being recognized when I try to update.
I am using a Gateway laptop and my internet connection is a verizon 4g device that I plug into a USB port. I feel like this should be so simple but have not been able to figure it out even when I called Apple and spoke to a rep...help!

In order to download to your phone over the air, you need to be connected to WiFi.
It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi.

Is there a comprehensive RGB guide available?

Similar Messages

Maybe you are looking for