Is there a conversion table for DLUs to CUCM 9.x licenses?
During the upgrade process from pre-9.0 releases to CUCM 9.0 and later, ELM is installed and lets you convert your licensing from the DLU model to the UCL/CUWL licensing model. This worked fine for the upgrades that I have already done, but now I am trying to plan how to allocate unused DLUs to the other license classes for the dozen or so additional clusters that I need to migrate. ELM does NOT appear to have an offline mode where you can enter a number DLUs and then come up with an acceptable allocation of UCL/CUWL/TP rooms beforehand.
Is there a formula somewhere that I can use to do this planning in advance of the actual upgrades?
9
I just went through a particularly painful exercise with the Cisco licensing group migrating a CUCM 8.6 system to 9.1. They required the following:
1) License request from ELM
2) Cisco SO# for upgrade order
3) Output of the LCU utility
4) ESW/UCSS contract number
In spite of carefully spelling out exactly what I needed was in the ELM license request, they issued a license which covered, all the licenses contained in the LCU report. Unfortunately, the LCU report covered a dozen or so different clusters, which are isolated from each other and could not share an ELM. After almost a month of working with the licensing group, I finally got it straightened out. In the process, I grabbed this information from the ELM 9.1 migration license calculator:
License Type DLUs Required
CUWL Professional 12
CUWL Standard 11
Enhanced Plus 9
Enhanced 6
Basic 4
Essential 0
Telepresence Room 11
Similar Messages
-
" No entry in the conversion table for the syntax group" error
Hi,
Iu2019m getting an error in the port setup when I try to run an Access Test on the logical directory.
Definition of path
TFTS02\INTF\RD1\OUTB\MM\RFC WINDOWS NT missing
Message no. SG024
Diagnosis
There is no entry in the conversion table for the syntax group WINDOWS NT and the logical path
TFTS02\INTF\RD1\OUTB\MM\RFC.
System Response
The system cannot generate a platform-specific path.
Procedure
Make an entry for the syntax group WINDOWS NT and the logical Pfad
TFTS02\INTF\RD1\OUTB\MM\RFC in the conversion table using the FILE transaction.
Regards,
RajivHi
the error is simple. The path
TFTS02\INTF\RD1\OUTB\MM\RFC you are trying to access is not there so create the path in the FILE transaction.
In file tcode goto NEW ENTRIES and give the path and also make sure that in AL11 the path and the filename you are trying to open exists.
Thanks & Regards
Jyo -
Is there any text table for t005...urgeny
hi,
is there any text table for t005...wat is the field to diplay country name in output...Ex: " england"Hi
Country Names are available in the table:
table name : T005T
short text : Country Names
LANDX is the field name which contain the name of the country.
Following are the tables which contain ALL DETAILS about country information.
u can find it in se11 by giving T005*
T005
T005A
T005B
T005BU
T005BUT
T005E
T005F
T005G
T005H
T005I
T005J
T005K
T005N
T005O
T005P
T005S
T005T
T005U
T005X
T005Z
T005ZR
T005ZT
reward if helpfull
ANEES AHMED
9886358645 -
Is there any database table for storing the weeks of a physical year?
Hi all,
Is there any standard table for displaying weeks in a year
thanks in advance.Not sure about tables
See the FM : TSTR_PERIODS_AMERICAN_WEEKS,TSTR_PERIODS_WEEKS
Thanks
Seshu -
Conversion table for oil products
Hi Experts
I want to download conversion table for oil products in SAP please help me regarding thisHi Pravin,
If you need a convertion factors then, youcan find in this link for Petroleum Products.
ttp://www.quantityware.com/_data/BCP_10A_customizing_SP09.pdf
http://www.mycalculations.com/jmm/uni01.html
http://www.chemlink.com.au/conversions.htm.
http://www.quantityware.com/support/index.php?rubric=20.
Best Regards
Satish -
Is there any interface table for restricting Item To Subinventory
Hiii,Gurus
I have thousands items which are restricted attribute,so,I have to restrict that items to several subinnventory.
But it takes long time to attched that items one by one to subinventory,
I want to know, is there any interface table to restrict that item through oraxcel??
many thanks
Regards
AndiAndi wrote:
Hi,Sandeep Gandhi.
Thank you so much for answering my question.It does work,directly insert the item to subinventory through that tabel.Thanks alot,this issue has been solved.Many thanks.
Regards
Andi Andi,
if you don't mind..can you share the code..or some pointers..as how you acheived this..we too have thousand items
doing functionally really takes more man hours
Thanks
Mahendra -
How to model a conversion table for unit of measures?
Hi
I am looking for some input on how to model a many-to-many relationship.
The situation:
A fact table with columns:
Product
Unit of Measure
Date
Value
1 product is stored with 1 and only 1 unit of measure - e.g. Product = Oil, unit of measure = m3
The fact contains several products, each having its own unit of measure.
A dimension 'Unit of measures' with columns
Unit Of Measure
Unit Of Measure Name
Measure System
While reporting on the facts it should be possible to chose the unit of measure I want to see my facts in. E.g. I want to be able to show Oil-production in m3 or barrels or liters, etc.
My challenge:
How to model this requirement?
Right now I tend to go for a bridge table between the fact and the dimension.
But I was wondering:
a) are there other ways to model it
b) are there pitfalls in using Bridge tables?
c) Can I re-use the bridge table in combination with other facts as the model grows?
c.2) do I need to create an alias on the bridge table to re-use it?
Thanks for your help
regards
AndyHi Kart,
ok let's say my model looks like this (columns below the tables names, sample in brackets) - again ignoring a date dimension:
Dim_Product --- 1:n --- Fact ----- n:1 ----- Dim_UOM
Id (1,2) Prod_id Id (1,2,3)
Name (Oil, Gas) UOM_id Name (m3, Barrel, Litre)
Value
So the products are coming from the Dim_product, Unit_of measures coming from Dim_UOM.
Fact values would look like this
Prod_id UOM_id Value
1 1 10
1 2 84
1 3 10000
etc
If I need to report in a new measure, I would be forced to add a new record to the fact table
Prod_id UOM_id Value
1 1 10
1 2 84
1 3 10000
1 4 150
with 4 being the new measure id.
What I am looking for is a way to be more flexible when it comes to converting values to different measures.
Thanks
Regards
Andy -
Is there a conversion process for CS2 to CS6?
I manage IT for a school, and one of my teachers has recently converted to CS6 from CS2. She reports that some of her files from CS2 are not saving after opening in CS6. Is there some sort of conversion or file update that needs to happen?
Saving as what? Where? On what system? Sorry, but this is totally useless. We do not even know what program "she" is referring to, much less anything else. Generally all files created in previous CS versions open just fine in current versions, so whatever happens is specific to "her" environment, not a generic issue.
Mylenium -
Is there a redistribu​table for the Core NI-DAQmx Run-Time Engine?
Also, is there a silent installation option?
Hi,
I'm not sure what you mean about a redistributable, but you can download the DAqmx core run-time engine here: http://joule.ni.com/nidu/cds/view/p/id/3812/lang/en
You should be able to do silent install by following this KB: http://ae.natinst.com/public.nsf/web/searchinternal/188FE05BA8933F4486256BC300708527
Trevor B.
PSE
National Instruments -
Hi, i have a question. I have installed two users in the same Tablet Pc.
In the data folder i have two tables for the same SyncBo (one for each user).
I need a sql sentence or standard java function to identify the table
that correspond to a user. Thanks.Hi Julian,
I assume you are using DB2e persistence since you say that there are two "tables" for the same SyncBo. In order to find out which table corresponds to which user, you will have to identify the "Conversation ID" corresponding to each user first.
Conversation ID is the combination ID for {Device ID + user ID + Application ID}
You can find this out from the trace file and then you have to query on MI_TABMAP table to find out the corresponding table for each conversation ID.
The DB2eCLP.exe tool required to query on tables can be found in SDN:
https://www.sdn.sap.com/irj/sdn/downloads -> MI -> New! DB2 Everyplace SDK for SAP
Thanks and Best Regards,
Sandeep -
Good day!
Is there an available table for Payment Terms?
Thank you!1. TVKGGT- TEXTS FOR CUSTOMER CONDITION GROUPS(CUSTOMER MASTER)
2. TVZBT - CUSTOMERS:TERMS OF PAYMENT TEXTS
3. TINCT - CUSTOMERS:INCOTERMS:TEXTS
4. DD01T - domain Descriptions
5. DD07T - Domain Value descriptions
6. DD07T - DD: Texts for Domain Fixed Values (Language-Dependent)
7. DD07V - View on fixed values and domain texts
8. DD03T - DD: Texts for fields (language dependent)
9. DD03L - Table Fields
10. DD07V will contain all the domain values. -
Summary Tables for Asset Master?
I need to create an asset/insurance data report, using SAP Query, which shows the asset master record balances only (acquisition and posted depre'n) as at report selection date.
Are there any summary tables for fixed assets that are equivalent to GLT0, KNC1 and LFC1 for GL, Customer and Vendor?
Thanks in advance for any assistance.
Best regards,I am not sure about ANEP or know how to use it. It only has data records for the fiscal year when there is posting to acquisition values field u201CAmount postedu201D for the asset. No data records for other years with posted depreciation.
-
Which is the table where we can get wbs description & plan cost in PS?
AmitFor WBS description, please use table PRPS. Use the field POSID.I dont know whether there is any table for plan cost.However we use table COSS for Cost totals for internal postings & table COSP for Cost totals for external postings.
Hope this helps.
Regards
Tushar
PS: Reward points if it is useful. -
What are the tables for Partner Fuction regarding the Vendors Purchasing ?
Hello Gurus,
What are the tables for Partner Fuction regarding the Vendors Purchasing Organisation. I need the Partner Function Key, Parner Function Name, Number and the Name of the Number.
Thanx in advance,
RamonaHi Jürgen,
I know that table but it is only showing me the technical name of the Partner Function and I need also the rest: the text(name), number and the number name (text). I presume there are other tables for those infos.
I am not sure if I understand what are these. I just want the table to upload the data to BW. -
Table for description of field name.
Hi,
Want to know is there any single table which stores all the Technical field names used in SAP Vs Description of these fields...?
Like WERKS = PLANT.
This doubt has come because there is table "TSTC" for" T. codes". Similarly, there may be table for field description as well, is my opinion.
Thanks & Regards,
SivaHi
From the field you need to indentify the domain in se11, then you can goto se16, table name is DD01T
DOMNAME = domain name
DDLANGUAGE = language
you can Identify the text
For table short texts you can refer table - DD02T
Thanks !
E.Avudaiappan
Maybe you are looking for
-
I am currently struggling to write this due to my very erratic spacebar. When I press it, it only creates a space about two thirds of the time. When I don't press it, it creates spaces, often several, in the middle of words. This is incredibly annoy
-
Your eprint registration asks for a "Screen Name". What is a "Screen Name"?
-
Smart Groups in Contacts OSX 10.8.2 causing Freeze
I am having a problem, similar to a few other threads from the old addressbook, but related to the latest Contacts app. Previous discussions suggest problems with old smartlists causing crashes, this time it is the new Smart Groups. This morning, I t
-
Adobe AIR for mobile closed wifi network
Creating a game that will ONLY be used in a closed network of less than a dozen iphones, ipads. What I need to figure out is the simplest solution for storing names with high scores for each completed game session. I was thinking of perhaps using one
-
I don't get the Lens Correction Profile for Sigma 10-20?
I see several postings of people discussing the lens profile for the Sigma 10-20. As a proud 10-20 owner, that is the first profile I looked for in LR3, but in my (trial) copy I don't seem to have it - there's only the DC4.5, DC18-200, DG8, DG12-24,