Is there a cord to hook up my ipod shuffle generation 2 to the iHome
Is there a cord to hook up my ipod shuffle generation 2 to the iHome iH6 Dual-Alarm Clock Radio?
Windows XP
how come when u clik on the ihome at the store on
apple.com it says what modles it uses and it dose not
say the ipod suffle seconed generation
That's what I've been telling you, possibly too subtly, I thought you already HAVE an iH6, thus was trying to show you that you could use the 2nd Gen Shuffle with it... The iH6 isn't exactly the PERFECT solution as far as the 2nd Gen Shyffole is concerned and vice versa.
Similar Messages
-
When I click on some songs in my itunes library it says the file is not detected. If i hook up my ipod will i loose the songs already on it or will it retore the files to itunes?
Before to attach your ipod.... try to find the file where you put your music.... click on that song.... itunes will ask you if you want to locate it.... from there you have to find the song(s) that is one of the folders in your PC.
http://support.apple.com/kb/TS1408 -
My computer with Windows 7 says there is no iPod when I run Device Sync diagnostic test on my iTunes, even though my iPod shuffle is in the dock. How can I fix that?
Hi there JMW1973,
You may find the troubleshooting steps in the article below helpful.
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
-Griff W. -
There is green mold/corrosion on my iPod 5th Generation charger.
There is green mold/corrosion on my iPod 5th Generation charger, how can I remove this safely ?
Hey Nikki, An iPod classic with iOS 8?!? OK, When you say "Charger" are you talking about the cable or the device that converts the 120 volt power from the wall to something that your iPod can handle? If you mean the cable, replace it, the green gunk is copper oxidation, corrosion. Moisture has gotten in the cable and is causing the cable to fail, replacement is the only thing that will work for certain. If within one year of purchase may be covered under warranty, you could get a free replacement from Apple. If it is just the tip of the cable wipe it off with a tissue and some alcohol. If your talking about the charging port on your iPod or the USB port on the other end, There are cleaning kits, you can purchase, which come with little brushes and pads and a cleaner solution to remove the corrosion. Just follow the instructions to the letter! Otherwise you can try this get bottle of isopropyl alcohol (rubbing alcohol) 91% and several cotton swabs. You may need to cut / trim the swabs to fit the port openings. Turn your iPod and/or the charging device off. Apply 1 maybe 2 drops of alcohol to the swab, you want it damp, NOT wet! If you get it too wet use a tissue to dry the excess alcohol off the swab. Then insert the swab in and out as if you were plugging it in and out, do not sweep side to side, you risk damaging the contact pins inside the port. Bend or break one and you'll have a real and expensive mess. after 4 or 5 in / out motions, varying the position of the swab from right to left, change swabs, dampen a fresh swab and continue until the swab come out clean. Or take it to Apple or an electronics service shop and let them clean it. When done allow the port to dry a few minutes before turning your iPod on. Good luck, Cheers.
-
Hi there, is it ok to use an ipod 1st generation charger to charge my iphone 4s?
Hi there, is it ok to use an ipod 1st generation charger to charge my iphone 4s?
Thank u, i meant to ask about the ipod nano 1st gen. Charger.", is it ok to use that to charge my iphone 4s? It fits but Given the problem ipod nanos 2005-2006 had and the replacement program i was wondering
-
my older ipod shuffle will not charge on my laptop. it starts and then stops after the light blinks four or five times. is there any other way to charge a shuffle?
Hello there, gallo2432.
The following Knowledge Base article offers up some great information on how to charge your iPod shuffle:
iPod shuffle: How to charge the battery
http://support.apple.com/kb/HT1477
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Hello Most times I am not within range of a wi-fi connection is there something i can add to my ipod touch to connect to the internet ?
You can purchase a MiFi or similar device. It acts like a wifi hotspot and connects to the internet via a cellular connection. You need a data plane too.
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CHsQFjAA&ur l=http%3A%2F%2Fwww.verizonwireless.com%2Fb2c%2Fmobilebroadband%2F%3Fpage%3Dprodu cts_mifi&ei=rcWKT-jeBYes8ATi7pDeCQ&usg=AFQjCNGEnpTkiGCnUOHacw5dEOr0BOc7zg&sig2=M 4Xf1Hglj2FYYYfnC5rJTg -
Will there ever be a software update for iPod 4 generation .?
I need to know ASAP it just worries me there won't be and other one o;
Apple will only give you a 10% recycling discount if you turn in an old iPod when you purchase a new one. Better off selling it yourself.
Apple - Recycling Program for iPod and Mobile Phones
BestBuy will give yo a better deal.
Best Buy Trade-In
I do not know about Walmart -
Is there a way to report a stolen IPOD if i have the serial number?
We think the ipod was stolen out of a purse and i have the serial number
any sugguestions on how to find it or report the serial number if someone trys to sync it?Sorry about your ipod.
Call the police and report it to them.
There is nothing Apple can do.
Change all of your passwords as well. -
Is there a way to have an Ipod shuffle pause at the end of a playlist?
I have one playlist with one file in it and I want the ipod shuffle (4th gen.) to play that one file and then end. The ipod just keeps repeating the one file when I put it on either of the two switch settings. Anyone know how to get it to pause or shut off at the end of the song?
It's a simple player. That's the way it works.
If you can explain why (the situation when) you need your shuffle to play just one audio file, and then stop, maybe I (or someone else) can come up with a workaround to achieve what you need. -
Does the cord used for syncing an ipod have to be the one supplied with it?
I've just installed a new hard drive and am trying to reload everything. My iPod is no longer recognised as a device on my macbook. Could that be because I am using a cable from a different product?
Can you see your ipod in the System Profiler/usb-highspeed port when it is connected to your mac?
Is Apple Mobile Device Service installed and working? http://support.apple.com/kb/HT1747
Message was edited by: Ingo2711 -
I just got the iPhone 5 and took it on a trip and took a bunch of photos on it. I just came home and hooked it up to my Mac for the first time and hit restore. All of my trip pictures disappeared. Is there any way I can retrieve them?
Did you by chance have photo stream turned on? If so then they might be there. When you restored your phone it deleted everything and they will be unretreivable from your computer.
-
There's a logo that pops up on my ipod touch screen with the logo Itunes and the USB cord but is unable to connecct with iTunes...what should i do?
Resolve communication issues
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Common errors: 1004, 1013, 1638, 3014, 3194, or 3000-3999. These alerts refer to gs.apple.com, say "There was a problem downloading the software", or say the "device isn't eligible for the requested build". -
Is there any way to hook into the SQL report pagination process?
I have a SQL report (based on EMP) with a radiogroup row selector.
The scenario 1 and 2 are in place
1) When the employee row radio group is clicked the P900007_JOB the text item is populated with the JOB for the employee.
2) When the page is initially displayed or submitted via the button the first row’s radio group is programmatically clicked and therefore populates the additional job information in P900007_JOB
Info (radio Group) Employee No Name
(+) 7369 SMITH
() 7499 ALLEN
() 7521 WARD
P900007_JOB CLERK
1-3 Next>
Once the report has been displayed and the next or previous pagination is used then none of the radio groups will be selected and the data in the P900007_JOB text item will still display the job of the last selected employee row.
What I require is on pagination some sort of mechanism to either
a) Call the page_init() that should then set the first row as selected and populate the text item via the programmatic click. (preferred option)
b) OR blank out the additional text item P900007_JOB.
Is there any way to hook into the pagination process?
I have a work around – Set the ‘Enable Partial Page Refresh’ to ‘No’ but this means a full refresh every time the pagination is used.
Details of my page
Report Region (Based on EMP table) – radio group as a row selector
select APEX_ITEM.RADIOGROUP(1,EMPNO,'X21',null) CHECKRG, EMPNO,
ENAME,
JOB
from EMP
Report Attributes -
Report template :- P900007_ROWTEMPLATE (custom template see later)
Report Attributes Substitution :- id="emp_report" (used in page_init see later)
Enable Partial Page Refresh :- Yes
Columns – All columns are selected as show but job is left out of the template below.
P900007_JOB - Text item in report region (disabled does not save state). Populated with the employees job when the radio group is clicked.
Control region :- HTML region that just holds a button <GO> just to submit the page and redirect back to the same page.
P900007_ROWTEMPLATE (named column row template)
Row template 1
<tr style="cursor: hand; cursor: pointer;" onmouseover="row_mouse_over(this, 1)" onmouseout="row_mouse_out(this, 1)" #HIGHLIGHT_ROW# ">
<td class="t15data" onclick="selectRow('#JOB#');">#CHECKRG# </td>
<td class="t15data">#EMPNO# </td>
<td class="t15data">#ENAME# </td>
</tr>
Before rows
<table class="t15standard" summary="" #REPORT_ATTRIBUTES# id="report_#REGION_STATIC_ID#" >
<th class="t15header" #ALIGNMENT# >Info</th>
<th class="t15header" #ALIGNMENT# >Employee Number</th>
<th class="t15header" #ALIGNMENT# >Name</th>
After Rows
<tr>
<td colspan="99" class="t15afterrows">
<span class="left">#EXTERNAL_LINK##CSV_LINK#</span>
<table style="float:right;text-align:right;" summary="pagination">
#PAGINATION#</table>
</td>
</tr>
</table>
*Javascript in page Header*
<script src="#WORKSPACE_IMAGES#apex_show_hide_region.js" type="text/javascript"></script>
<script language="JavaScript" type="text/javascript">
<!--
function selectRow(pJob)
/* console.log('pete got here!'+pJob)*/
$x('P900007_JOB').value =pJob;
/* Start Page init*/
function *page_init*()
/* Used to set radio groups on reports */
/*console.log('START pete got here!');*/
var is_checked = false;
var l_check = $x_FormItems($x('emp_report'), 'radio');
/*Loop and set flag if checked*/
for(var i=0,len=l_check.length;i<len;i++)
if(l_check.checked){
is_checked = true;
/*end loop*/
/*If none checked force a click*/
if(!is_checked){
/*no longer need as doing click below*/
l_check[0].checked=true;
/*Force a click on the first radio group - extra details should then be
populated*/
var l_click = l_check[0].click();
/* console.log('END pete got here!');*/
/*END page_init*/
// -->
</script>
*Application shared component.* – This fires a DB packaged procedure when the page is loaded.
P330_PART_NO_HIST
Process Point On load after Body region
Process Text show_hide_memory.part_no_history_details();
*Packaged Procedure* – This kicks off the page_init javascript in the header (earlier) to click on the radio group in the first row.
PROCEDURE part_no_history_details AS
BEGIN
htp.prn('<script type="text/javascript">' || CHR(10));
htp.prn('<!--' || CHR(10));
htp.prn('page_init();'|| CHR(10));
htp.prn('//-->' || CHR(10));
htp.prn('</script>' || CHR(10));
END part_no_history_details;
Thanks Pete
Edited by: Pete @ LSC on 26-Jan-2010 06:56Anybody any ideas? Should I be looking down the route of using my own pagination buttons and adding my code to this?
There seems to be a routine $a_report that I can use for the pagination but I am finding it difficult to get the current first and last record values that I would need to pass. I've seen references to below in the form but when I'm using partial refresh they do not seem to change.
wwv_flow.g_flow_current_min_row
wwv_flow.g_flow_current_max_rows
wwv_flow.g_flow_current_rows_fetched
wwv_flow.g_request
Thanks Pete -
I am tying to hook up new ipods the we got for xmas and for some reason it just says that it in unable to connect to server. I am wondering if there is a limit of how many can be hooked up? we have an ipad, 1 working ipod and 2 previous ones that are not working and no longer in the house. any ideas? password id correct......
Just what are you/the iPod doing when you get the server message?
Maybe you are looking for
-
Error 150:30 on new iMac with Yosemite
I upgraded from an 8-year old iMac to a new iMac with Yosemite. After migrating everything over, I can't run PSE because it said some files were missing. I re-installed the software using my original disk. Then I got a 150:30 Error. Help!
-
Vendor line item transfer from one profit center to another profit center
Dear All We have posted vendor line item in wrong profit center. now we want to transfer to correct profit center what is the procedure? Vishvas
-
I recently noticed the function to inverse black and white (and many other things). I was just wondering if there were any harmful implications in doing so. Rather it be harmful for an extended period of time, or anything at all really. Frankly I don
-
Essbase 9.3.1 Currency Conversion @ Prior Rate
I am trying to convert some Balance Sheet figures for Jan 2011 data using Dec 2010 Exchange rate. However the calc script will not reference Dec 2010 Xchg rate, it ONLY references Jan 2011 Xchg rate! Config File: CCTRACK FALSE Currency Outline: Time
-
Installing CS6 Design&Web Premium on a Win7-64 bit PC. Which PS do I install?
I have a PC running Win7-64 bit - sp1. I'm installing CS6 Design&Web from a product CD. When I get to the installer's "select the products to install" checkboxes screen I see there are two checkboxes for Photoshop. One for PS-64 bit another for jus