Is there a CS4 Trial still

well just after i installed the Adobe CS5 Master Collection, i cannot install both Adobe Premeire Pro CS5 or After Effects CS5 (because it requires a 64-bit opperating system). But i need After Effects & Premeire Pro CS4, but i can't find the trial of the After Effects CS4 or Premeire Pro CS4 anywhere. Is there any way to get that both CS4 Products?

It's not available in trial form, but if you decide to buy Production Premium or Master Collection, then the CS4 versions of Premiere and After Effects are bundled in with your purchase for use in 32-bit situations.
http://prodesigntools.com/is-cs5-64-bit-only-and-other-top-questions-answered.html

Similar Messages

  • There is a trial still going on after I paid for the product

    So I basically did a free trial for photoshop cc and now its over. I then paid 9.99 a month for photoshop and lightroom but I never got the license number all I got was a code with numbers and letters, I tried entering that code into the license code thing but it won't accept numbers! How can I find my license number. BTW I am on a mac and I paid online, hope that info helps at all!

    Moving this discussion to the Creative Cloud forum.
    MarilynDiPasquale if you are attempting to enter a redemption code then I would recommend reviewing Redemption Code Help.  The page provides guidance on how you can redeem your code for a membership.

  • CS4 Trial Version .. still available ?

    Hey --
    Is there anyway that I can possibly download the CS4 trial until I can purchase the CS5 ? I just got a new computer and don't have CS4 Creative Suite on cd anymore. Was wondering if it's possible to still download dreamweaver & photoshop CS4 trials still ?
    Thanks in advance for any help!

    Yes - the official, authentic Adobe CS4 free trial downloads remain available for all products if you need them, it's just a matter of looking in the right places.

  • Just downloaded Photoshop CS4 trial - Bridge isn't there!

    I just downloaded Photoshop Extended CS4 trial on Macbook.
    Bridge isn't there -when you click on the icon from Photoshop it doesn't go anywhere.
    Have tried to reset preferences, and have properly uninstalled and reinstalled Photoshop.
    Definitely selected Bridge to install along with Photoshop.
    Any help gratefully received.!

    Meaning you either have a wrong install or a wrong trial download.
    Installing PSCS4 extended should install Bridge as a separate application in
    the same location.
    Double check the install procedure or else try to download a new trial
    version, if you are still within the 30 days trial period that should not
    matter I would think.
    Bridge is not in the root folder, but Photoshop is.

  • I downloaded Trial version of Photoshop CS 6 - Now it has expired , i don't have serial key . Is there any way I still can use Photoshop Cs 6 ?

    I downloaded Trial version of Photoshop CS 6 - Now it has expired , i don't have serial key . Is there any way I still can use Photoshop Cs 6 ?

    What csuebele said, or download and install it as a trial on a different computer.

  • Adobe Photoshop Extended CS4 Trial on Macbook

    Hi, my girlfriend tried to install the photoshop CS4 trial on her spanking new macbook. However, after downloading the trial and running the installer SUCCESSFULLY, she encounted a problem opening PS.
    The icon didn't show up, and when clicked an error message popped up, saying something to the effect of...
    "photoshop is not supported on this architecture."
    Does anyone know what the problem is?? Her laptop is a BRAND NEW 2.13GHz macbook, Intel Core 2 Duo etc etc etc... So I dont understand the error. Considering it is the right architecture. Anyone else had this problem? Iv searched the forum and googled the issue but I cant find an answer.
    Any response would be greatly appreciated
    Rick

    I recently encountered this exact problem installing Photoshop CS4 trial on an Oct. 2006 production vintage MacBook Black 13" with 2.0 GHz Intel Core Duo, 2 core, 1.5GB ram, lots of hard drive space, running OS X 10.5.8.
    After much waiting on the Adobe help line, I could not even get them to say it was supposed to work on the MacBook. At one point they suggested downgrading to 10.5.4 to be in line with the required specs. I said no will do that.
    The installer apparently ran correctly but when trying to open Photoshop, it gave the 'architecture not supported' error which turns out to be bogus.
    I did the same install on a MacBook Pro running 10.6.2 which was successful, and I saw that there was a lot more stuff installed in the Photoshop folder.
    I finally upgraded the MacBook to 10.6.2 but the install would still not work, even after performing the Photoshop CS4 uninstall from Utilities/Adobe Installers first to get rid of previous attempts.
    It seems that the installer is completely broken. If it detects any remnants from other installs, it seems to not even try to do the complete install, yet doesn't give any error messages. The broken install is only apparent when trying to run the app, and it gives a totally bogus error message.
    I finally found the Adobe CS4 Clean Script which showed a previous trial install of
    Creative Suite 4 Master Collection which also had not worked. Removing that with the Adobe CS4 Clean Script then for some reason seemed to allow the install of Photoshop CS4 trial to execute correctly. The script thankfully left the CS3 installation alone.
    I don't know whether the upgrade to 10.6.2 was a required part of the solution or not, but after many, many hours of fighting with this, I can now say that Photoshop CS4 trial now works on the Oct. 2006 vintage MacBook.
    And to Adobe I say, please fix your installer so that when I say install, it installs, and forget the trying to be so smart. At least give an option to force overwriting of previous remnants so you can be sure the install has installed everything up to date.
    And please give some better error messages, particularly when it doesn't install required parts.

  • CS2 crashes when trying to load image AFTER CS4 trial

    I just recently used the CS4 Extended trial (which worked fine).  It's 30 days ended and I sadly went back to my purchased copy of CS2 (actually own the whole Prodcution Studio Premium).
    Now when I try it, Photoshop CS2 loads fine, but then hangs whenever I try to load ANY image.  It even displays the thumbnails correctly.  Just freezes and then gives the "Not responding" error after a few more seconds when I actually try to click on any picture.
    I uninstalled CS4 -still happened.  I uninstalled CS2 and reloaded the whole suite.  Same thing.  I then uninstalled it again and then manually deleted all the files I could physically find, reinstalled it.  Same thing.
    I am going mad!!
    I am running the whole thing on Vista 64 Home Premium with 8 gigs.  (And everything worked FINE before the trial, and yes, I tried with and without all the latest CS2 patches AND tried running it in Windows XP SP2 compatability mode already -although it worked fine before without it.)
    Any thoughts from anyone?
    Randy

    I have hundred of dollars worth of software sitting useless on 5 DVD's next to me because "CS2 is no longer supported".
    It never was on Vista!
    I sympathise with your situation however, and you do seem to have tried everything that might help.
    Your conclusion that uninstalling the CS4 trial took CS2 with it is wrong unless you ignored warnings about shared files.
    Your concept of activation is wrong too. Activation counters can be reset by Adobe if they get an explanation.
    There may be a way out of this but you might find it less hassle in the long run to reformat and start from scratch.
    On the other hand, since you are are only just in the upgrade window, you might consider upgrading to a version designed for Vista

  • Error 2 when installing Fireworks CS4 Trial?

    Hey, I keep getting the Error: Error 2 when ever I try to install Fireworks CS4 Trial, downloaded from Adobe.
    Installing: Adobe Fireworks CS4
    Adobe Exstention Manager CS4
    After its pretty much done, it say's finished but with Error's, hit view info, and I keep getting Error 2.
    Tried dowloading the trial from other sites, and that still doesnt work.
    All my Adobe products of CS3 have been uninstalled.
    Problem help?

    Fixed it!  Yay
    I've got to say - I owe it all to a guy called Justducky on macosx.com.  Still, here's the story.  After search around I found his post about a similar problem with Dreamweaver.  He dug, and delved and worked on permissions etc but nothing worked.
    Finally he got down to the solution:
    Uninstall everything Adobe.  I mean everything.  AIR, flashplayers if you can.  Everything.  Delete .plist and .pref files that have adobe in the name (carefully).
    Create a new account that has admin privileges (not convinced this was necessary but don't know Macs enough to confirm)
    Safe Boot and log into the new account
    Install Fireworks.
    And there you go, it works.  Simple eh?  As an extra precaution when installing Fireworks I only did the bear minimum.  I didn't install Air, Media Player, Bridge etc.  I have done now and they work.
    You can read the full account of JustDucky's journey here
    Hope this works for you too!

  • CS4 Trial Version: How to Uninstall from PC?

    Hi!
    I downloaded the CS4 Trial Version. Now I would like to uninstall it from my PC. I still have 23 remaining days, but would like to clear space on my hard drive asap. What will happen when the Trial expires? Will it self-delete, or what??
    Would you please tell me how this can best be done? I don't want any files from this download remaining on my hard drive.
    TIA,
    Clyde Semler

    Here's the thing.  The uninstallers were part of the package that Adobe made you down and decompress (along with the installer package).  From the sounds of it you do not have it.
    The following is the CS4 Clean Script:
    http://www.adobe.com/support/contact/cs4clean.html
    This is usually only recommend in cases where where betas and pre-release software were removed from a system and you run into problems installing the legit software.  As a result, this will disable all CS4 software, serial numbers and Adobe Acrobat/Reader installations.  It's a commonly used script but it will wipe the system files/registry and all program/user library folders and takes longer to run than the typically uninstaller.
    That's your only other option if there is no add/remove programs for whatever reason and you did not hold onto the separate uninstaller packages.

  • CS4 Trial will not open

    I have downloaded the InDesign CS4 trial from the Adobe website, and installed with no problem.
    However it will not open. When I click the application I get the following error message:
    'You can't open the application "Adobe InDesign CS4.app" because it is not supported on this architecture.'
    I've checked the system requirements and sure I have what's needed.
    I'm running OS 10.5.6 on a dual 2GHz Power PC G5 with 1.5Gb memory.
    Any idea what's wrong?

    In the application folder there is a folder 'Adobe InDesign CS4' within which there is just the application file. I would expect there should be more file there??
    I've un-installed and installed again - still the same.
    Even downloaded the dmg again and done thwe whole thing over again.

  • In need of Flash CS4 trial again

    Hello i had downloaded flash cs4 on a laptop, due to my desktop being messed up, now my desktop is fixed,and i would like to download the flash cs4 trial on desktop now,but the only problem is i do not see CS4 trials on site anymore, is there anyways to still access the flash CS4 links to still get trial version, or will i have to wait for CS5 trial to come out now:( thanks in advance to all who respond:)

    OP was looking for CS4."
    I know. The site had all trials down for a bit, and traditionally the site only has trials for the current version, which is CS5. Which were just added to the site, hence the link. Nowadays the only safe place to find a CS4 trial would be from an old trial disk, and some book CD-ROMs will have a trial on them that  you could get from a library.
    Regarding where the link was from. The link I added was one that came from the Adobe.com folks - the product page link wasn't working, so they gave us those which would take you directly to the store area of the site to get the trial.

  • Installing CS4 Trial Errors

    I know this has been discussed ad nauseaum but after reading through message archives I still have a question or two.
    Yesterday I attempted to purchase CS4 online, Adobe's store was experiencing problems and I was advised to call to make my order which I did.
    The person I talked to on the phone advised me to download the trial to play with until my disk copy arrived, which I did.
    During installation I got the now infamous CS4 Install error, adobe common set rgb error, error# 1603 fatal error during installation. I was given the option to comintue the installation and at the end it said there were errors but I could use it with some limitations. I clicked on the place for error details and then on the assistance button and followed all of the instructions on how to correct the error and then reinstalled. The same error came up so I went through the steps again this time running the installer as administrator, same thing. I am using Vista 64 bit.
    After reinstalling 5 times with all other programs off including firewall and virus protection and following adobe's instructions to the letter the error persisted. I decided to try opening CS4 and it opened just fine, I have played with it all day and everything I have tried to do including printing works flawlessly. Of course in one day I haven't used absolutely every feature but I have used quite a few.
    I wouldn't be concerned except for the fact that I will need to uninstall it in a few days and install the disk version and I'm wondering just what kind of headaches I'm going to be in for. I really don't want to use the cleaner because I would rather not have to uninstall everything else adobe, I have a lot of customizations in PSE7 than I prefer not to have to redo as well as a fully populated organizer.
    Can I expect problems with the disk version?
    Tia
    Claudia

    I did not uninstall, I followed Adobe's instructions to the letter including
    the changes to the registry. I did not run Clean Script partly because I did
    not know of it then and after I learned about it they said it uninstalls ALL
    Adobe products and I do not want to do that. I have way too many things in
    PSE7 to consider doing that at this time. As far as I know I have full
    access to all of my directories. I do have both of my monitors calibrated so
    there are profiles for them. I have no idea how to do anything about the
    monitor profiles. That is probably the problem, the monitor profiles.
    CS4 trial is working fine so I'm not going to mess with it until my CS4
    disks arrive and I'm ready to uninstall the trial and install the registered
    version.
    Claudia
    partitimepoodles.com

  • Travails on CS4 Trials

    Since I recently upgraded my HW , it seemed appropriate to try CS4 again.That turned out to be a real exercise!
    First off, I get an 0x50 Stop message as I was beginning to configure Bridge, when I did a quick exit to see what I set up in PS. It never happened again so I went on. The Stop messages now changed to 0x08E. Careful inspection of the message ID'd NV4_disp.dll, the nVidia driver which I updated when I configured the new installation. CS3 Bridge has no problem with it, but CS4 does. Since it is a BSOD continually, I rolled back the driver. Now, Bridge runs ok, CS4 still runs OpenGL, but now CS$ appears not to really like that driver as I get erratic behavior like when moving the Window after engaging Float all Windows (I hate the default opening!) the image disappears unless I open something else or after moving it around for a while and clicking like mad, I get the image back and it is stable.
    The second problem so far is the CS4 Bridge icon in the startup tray. If that is lit, I cannot open CS3 Bridge. Photoshop opens ok, but in order to open Bridge CS3, I have to exit CS4 Bridge first, which, incidentally is how I got the 0x08E stop! There is no way to permanently eliminate it from showing up because if you open CS4 Bridge at all, it sets the Startup icon no matter how Bridge  (and msconfig) is configured.
    Since I also have BSOD when I installed CS3 (see http://forums.adobe.com/thread/540226?tstart=60), which also was traced to starup problems, I can only conclude that for my system outlined in the link, inadequacies have crept in for older programs running on newer platforms, and some older peripherals as well.
    I have all the updates to CS4 and ACR.
    On a positive note, CS4 Trial installed without a hitch and fast, around 5 minutes or so, which was nice to see. Also, my complaint with the brush disappearing in cerain color and values seems to have abated.
    I guess I am stuck with CS3 for the forseeable future. That's not too bad, and hopefully, CS5 will cover all these bases nicely.

    Been there Done that. Makes matters worse.
    From what I can see, it seems to have to do with redraw, because as I decrease the acceleration, now it only redraws part of the image, tiling from top to bottom. Not all the tiles are present. If I drop to basic acceleration (one step above minimum) nothing redraws except box outlines.
    On another front, I mentioned the Bridge Startup problems. I have been looking at that too, and neither will open if the other already is. So I went into the prefs on both, had only Bridge and Photoshop checked in CS3, and most checked in CS4. So I picked only Bridge and PS there also.
    Problem went away.
    But hold on! There's more! Now if Bridge 4 is running and minimized, opening CS3 Bridge maximizes CS4 and doesn't open.If CS3 is open, nothing happens trying CS4. It doesn't maximize a minimized CS3 either.
    There's still more! Now enabling everything or most everything in CS4 Bridge does not restore the problem. I may consider the update again.
    This all can have roots in the video I suppose, but since I am going to wait for CS5 and Win7 and a real computer update, I'll have to wait for then. By that time, advances on all fronts are to be expected; a new video card is in the budget, but I haven't the foggiest which one!
    On second thought, I don't want BSOD again so forget the update to the video.

  • Flash CS4 Trial won't install

    Hi There!
    I've been trying to install Flash CS4 Trial since its release
    but always get the same error message.
    The package is uncompressed and install process begins, goes
    to 100% and then a message box comes on asking to check disk space
    (I've got plenty) and permissions and privileges (I'm using the the
    admin account). Firewalls down, no good.
    Tried on 3 different machines with plenty of disk space,
    memory, etc, both on XP and Vista. Doesn't work.
    I have also downloaded the same file 3 or 4 times. No good.
    I wonder if anybody else has faced the same frustrating
    problems.
    I had previously installed CS4 suite (beta) and it all worked
    fine.
    Please, help!

    What in the World? Is there anyway to get FLaSH CS4 trial
    version to install? OK. I have Service Pack 3, it keeps telling me
    to disable my Firewall, (which I have done over and over, after
    re-booting...) I even tried to install after checking off
    everything in the msconfig in the Run it won't do anything
    different... Also, I still haven't seen hide nor hair of any
    'FLEXnet' file or app ANYWHERE. Honestly, what is with this crazy
    'install' routine Adobe? Help! I really want to be working with
    this new prog!!! Please do away with this insane install thing
    please... (ASAP) ...thanks.
    UPDATE: Ok, now i've gotten to the next problem: the Install
    stops at 8% (Dynamiclink Support) no matter what... I was able to
    install the CS4 of Photoshop though. I'm going to try removing my
    licensed copy of Flash MX2004 in case it is interfering with the
    CS4 Flash install... Other options may be try installing the
    Premiere so that it can get the Dynamiclink Support installed ...?
    maybe CleanScript...? no way to find the simple solution on any
    support pages or forums though? hmm...
    SOLVED:
    I managed to put off some bills and purchased the upgrade
    from MX2004 and the install worked fine... go figure! (This also
    allowed for the phone tech support assistance i apparently needed
    too. I got a nice person after a 15 minute wait.) The purchased
    upgrade download worked as far as the install went: good; but: I
    went click on the FLaSH icon to open the program after a reboot and
    it said "the Licensing is no durn good no more." So I said,hmmm...
    Here's what was likely a problem: the FLEXnet folder (had to
    do an Explorer search to locate these) had been duplicated from a
    previous install attempt a few days earlier and the duplicate AS
    WELL AS the 'non-duplicate' had a 'read only' status that need to
    be un-checked and permissions had to be set on the FLEXnet folder
    for Admin, etc. That was pretty much the culprit. Hope this may
    help someone. This tech file was a help: kb405970

  • CS4 Trial expired overnight.

    I installed CS4 trial on Windows XP Pro yesterday on my son's PC.
    He wanted to learn PS so I encourage that.
    He requested that I install it on my PC, which is dual screen, so he could have PS on one screen and the tutorials/youtube videos on the other.
    Next day, his PC has expired, whilst mine still works.
    How do I get the trial working again? I tried logging in as an administrator, to no avail.
    Also, I notice that PS will NOT run if you try run it under a user who does not have a password. For example, Guest.
    All my users are 'Limited' users - nobody in my household has admin priv (other than myself) so running PS as an administrator is completely out of the question.

    How do I get the trial working again?
    Not at all, unfortunately. Once locked, only a full retail serial will unlock it. re-installing or ny such thing doesn't do anything nor would the options listed on the knowledge base - where there is no serial, there is nothing to fix. As to why it shut down is a differnt matter, but your security policies may add to it due to blocking access to specific files and the registry. This would be perceived as an attempt at tampering by the licensing service. Similarly, virus scanners and otehr tools may interfere. Another frequent cause are updates of any kind, Adobes own and others. Anyway, short of rebuilding the OS from scratch with a low-level format, there is nothing you can do. If it's just for learning generic image manipulation stuff, give GIMP a spin. It's free. You may also want to consider edu versions of Adobe products, if your son or one other family member is entitled....
    Mylenium

Maybe you are looking for

  • Crystal Reports 2008 Version 12.2.6.567 Crashes with APPCRASH , opensql.dll

    Hello everyone, I have download and installed a trial license of BOBJ 3.1, i have installed an SAP INT Kit and have been trying to convert some sample CR from the SAP servers " iwdfvm..." to a local SAP Server on the network. I receive this error in

  • Red eye function not working correctly - big black spot

    On my old mac I never had a problem with this feature. Now, when I hit the red eye button, a green dot appears on the icon and I get the croos hairs on the screen. I select the eye to change and it leaves a huge black/grey spot round the eye. Looks l

  • Regarding open items

    Hi gurus, I have an issue in regarding the open items uploading when we upload the GL, AP, AR balances from the legacy system, the client requirement is to view the Customer balances and Vendor Balances as Invoice wise and to for each and every custo

  • ABAP  INTERFACES

    HI , Can u explain the interfaces in ABAP concepts. Thank u sir,

  • Render a project to FLV

    I'm new to Flash authoring, and something seems puzzling. I see that it is possible in Flash to render an animation (project) to AVI or MOV video formats, and it seems to work fine (although you can't choose your AVI codec, which seems like a trivial