Is there a default jabberlocalconfig.xml location

I am currenlty trying to roll out Cisco Jabber 9.6 out to 300+ pcs. I have tried using the .mst file, i have tried using the msi switches, but I cannot get jabber to open to the correct settings on first launch for each user. Currently they have to sign in, get the error which allows them to get into the settings window, select "cisco Communications Manager (phone only)" and then "use the following servers". Now the server info does auto populate in the tftp,cti and ccmcip fields but i cannot figure a way to make these default.
I then tried to setup on jabberlocalconfig.xml and copied it to all Doc&Settings\Application Data\Cisco\Unified Communications\Jabber\CSF\Config but when a new user logs in, they are created a default jabberlocalconfig.xml file with no settings applied.

jabber for windows 9.6 is expecting a _cupslogin TCP record created for the domain name that you mention in the first log in prompt;
you may want to refer to the "_cuplogin" section of the following document ;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_6/CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide/CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide_chapter_010.html#CJAB_RF_S2C1A378_00
i hope this helps.

Similar Messages

Is there a way to change the default Save As location for Adobe Reader XI?

Is there a way to change the default Save As location for Adobe Reader XI?

kel-drago wrote:
Can't be that difficult to arrange.
No, it's not. But someone has to request it: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Changing the default bookmarks save location

Heya,
If i right-click a website and click "Bookmark this page". It brings up the bookmark panel with the default folder "Bookmarks Menu" is there any way i can change this default ?
"I dont mind if it goes deep into the firefox:config, system or regedit as i am mostly computer savie :)"

''Changing the default bookmarks save location:''
You would do better clicking on the bookmark star on the Location Bar.
You can install "Add Bookmark Here2" and probably make modifications in the options.
* Add Bookmark Here ² :: Add-ons for Firefox<br>https://addons.mozilla.org/en-US/firefox/addon/add-bookmark-here-2/
* http://dmcritchie.mvps.org/firefox/addbookmarkhere2.txt

HT5467 I have an ipod touch 4th gen. Is there anyway to enter my location other than registering my router with skyhook?

I have an ipod touch 4th gen. Is there anyway to enter my location manually or do i have to register my home router with skyhook? I live in the middle of nowhere literally and my home router is the only wi-fi for miles.

Thanks for the reply. There is no cell phone signal available here. The nearest McDonald's to my ranch is 200 miles east in Aberdeen, SD. The router is in my house and the local coop telephone company installed it and I use Windows. I know........
I am using the ipod for music and also the ihome weather link through their i+sleep app. The ipod just keeps searching for my location.
It seems like you could have a default location set up in the ipod. Any ideas?

Defaulting of SubInventory / Locator

Hi
We have configured Subinventory as locator controlled. I need inputs on below scenarios -
Can we default Subinventory and Locator at the time of PO Receipt. My understanding is SubInventory can be defaulted by maintaining subinventory at Item - Org in Item Master / Subinventory on PO Line / Transaction default. Is there any alternate option?
Locator is dynamically controlled and the user can give the locator at the time of PO Receipt. Locator can be given in Item Transaction Default screen but as we have millions of items so the process will become very cumbersome. Is there any good alternative to default the Locator at the time of PO Receipt.
For drop ship orders, users would not like to enter the subinventory and locator for each line. Subinventory can be defaulted but how to default a single value of locator for multiple lines at the time of PO Receipt.
Pl share your thoughts!
Thanks!
Rajeev

Sandeep Gandhi, Independent Consultant wrote:
Rajeev, assuming your subinventory is locator controlled, you can let a locator default automatically at PO receipt.
You are familiar with the "item transaction defaults" screen. Just go to the locator tab and create a new record with type = Receiving.
If you have a large number of records, you can do load those values programmatically.
Since it is only a default, the user can override it at the time of receiving.
The other option is to modify the receipt traveller. This way, a default can be printed on it based on your custom logic. And when the warehouse person PUTS AWAY the material, he enters the put away tranasction with the locator where it was stored. This works especially well if you are using handheld scanners for put away. You print the non-barcoded locator on the receipt traveler. And you make the person scan the actual locator on the rack. This ensures that he put it away at the right location.
For drop ship orders, why are you receiving them in a locator controlled subinventory? Or you are not using the true drop-ship functionalty in Oracle?
Hope this helps,
Sandeep Gandhi My bad..sandeep is right..what i did was i haven't created a record for subinventory in item default screen..i just created it for locator..so when i was receiving it..i can't find the default values..i just went ahead and created a record for combination of subinventory and locator..and i could see them..been defaulted..
Sandeep..
what do you mean by true drop ship functionality in oracle..can you be more specific please??
we follow by defining the item to a least used org..when we create a SO..we do select it as external source..then we logical receive PO...and do the logical receipt
Any other way you are talking about??
Thanks
Mahendra

Default Project File Location - PE7

Can anyone help please
I have been looking for a way to edit my default Project file location. Have managed to change all the Scratch disk locations to my (Local) F: Drive, but I cannot see a way to change the default location for Projects to be the same drive.
I know I can set it each time I start a project, but it seems strange with modern software to be unable to define a default.
I've searched the Registry and can't find anything there, and I cannot see anything in Edit>Preferences. Also searched the forum, but couldn't find an answer.
Thanks
Colin

Thanks for the prompt and helpful reply. Really is much appreciated.
I'm going to print off your response and use it for my next project (in a couple of days).
Looks perfectly logical way of working.
Colin

Default Tablespace Creation location Setting

Hi all:
When I set up the HTML DB 2.2 environment, I musta done something weird, because instead of workspace tablespaces being created in
/u01/oracle/MILAPEX/
they get created in
/u01/oracle/MILAPEX/MILAPEX/
Doesn't appear that I can change this within the APEX admin area. Where / what table stores this location? Appears that I should have put /u01/oracle as the tablespace location, since it would seem that the SID is being appended to the location, and it doesn't provide modification.
Any suggestions would be welcome.......
Thx!

Hi Rajdeep,
there are quite different ways to achieve this,
- If you are open for enhancement, then write the piece of coding to default the storage location in Includ:MV45AFZB under
USEREXIT_SOURCE_DETERMINATION which could be applicable for all doc types or set of doc types/ item cat's
OR
- You can achieve the same requirement with Transaction variant in Tx:SHD0 while recording enter this field manually & at the time of save , save it as "with content" & assign this variant in order doc type details in VOV8.
then whenver you create sales order using this doc type, storage location will be defaulted. ( assumption is - you have single storage location which has to be defaulted in order)
Hope it helps,
Regards,
ReazuddinMD

Default query save location in SSMS 2012

So, finally, is there a way to change SSMS 2012 default query save location?
Scenario:
1. Open SSMS
2. Create new query
3. Click Save
I see "Documents\SQL Server Management Studio" folder, but I want to change it to be "d:\". How do I do this?
I tried:
1. http://visualstudiohacks.com/options/changing-the-my-projects-folder-location-and-other-settings-in-ssms/ - in folder "Documents\SQL Server Management Studio\Settings\SQL Server Management Studio\" there is a file NewSettings.vssettings,
setting it to "d:\" or "d:\\" didn't help.
2. Changing HKEY_CURRENT_USER\Software\Microsoft\Microsoft
SQL Server\100\Tools\Shell VisualStudioProjectsLocation didn't help too. There is no "Shell" under "110\Tools\"
Did I do something wrong, or is there another way?

try this
http://visualstudiohacks.com/options/changing-the-my-projects-folder-location-and-other-settings-in-ssms/
Regards,
Praveen D'sa
MCITP - Database Administrator - 2008
sqlerrors
Hi Praveen,
Based on my test, the solution in the link your post works in SSMS of SQL Server 2005, 2008 and 2008 R2 version. However, in SQL Server 2012, the configuration of SSMS is changed.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. Please help

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. I am accessing it via strong wireless connection and it works fine on other devices. Please help.

zapgrap wrote:
there is no information of locations.
Then no information exists. Use the Report a Problem button within the app to report it.

How to change default save as location

hi,
how to change default save as location in acrobat 7.0?

Why is Acrobat involved in this process at all? Why don't you save directly the pdf from your email program directly where you want it to be? Acrobat is just adding another step to this process.

Defaulting the Sotrage location for all the line items in my sales order

Hi,
I have a scenario to default the storage location automatically in my sales order for all the line items. It is not going to change for a particular sales org. Dist. channel & Division combination. Can you pls. suggest me a solution for this.
Thanks
Ghanesh.

Hi,
You can default the storage location by using the below user exit
Storage location
Auto determination of storage location as u2018XXXXu2019 for sales order
Include - MV45AFZB
Form - USEREXIT_SOURCE_DETERMINATION
IF (VBAK-AUART = 'XXXX' and VBAK-VKORG = 'XXXX' and VBAK-VTWEG = 'XX').
VBAP-LGORT = 'ABCD'.
Regards,
Gopal.
Edited by: Gopalakrishnan S on Feb 25, 2010 7:35 AM

How do you change the Default 'Save As' location in Adobe Acrobat 9

How do you change the Default 'Save As' location in Adobe Acrobat 9?

You put a shortcut to the desired location in that location. You are then only 1 click away.

If I didn't buy ap to locate phone is there still a way to locate phone if stolen?

If I didn't buy ap to locate phone is there still a way to locate phone if stolen? Any help would be greatly appreciated!!!!

There is no app that you needed to buy. If you set up the Find My iPhone service in the iPhone's settings prior to your iPhone going missing, then there is a chance that can be tracked, though it depends on a number of factors: the iPhone is turned on, connected to either the 3G or a WiFi network, or has not had the Find My iPhone service disabled or the iPhone been completely restored. Log into icloud.com and go to the Find My iPhone section. If you did not set up Find My iPhone, check with your cell carrier. Some carriers offer their own tracking service, though you usually have to sign up when you still have the phone and have to pay for the service.
If your carrier does not offer such a service and you did not set up Find My iPhone, then there is no way to track the unit. Notify the police and your cell carrier, and change any passwords for any online accounts you may have used from your iPhone (the iTunes Store, for instance).
Regards.

Is there any default calendar which I can use on my form and report

Hi All,
Is there any default calendar which I can use on date field on my form and report.
just by change its property like double click on date field and property calendar = yes
or any other way.
thanks
mohan

hi
create a functions something like this.i hope it helps u.
function call_calender ( f_dtm_set in date default sysdate ) return date is
l_dtm date;
l_list paramlist := get_parameter_list ( 'CALL_CALENDER' );
begin
if
not id_null ( l_list )
then
destroy_parameter_list ( l_list );
end if;
if
trunc ( f_dtm_set ) != trunc ( sysdate ) --> if you call the calendar function with a date, the calendar will change to that date
then
l_list := create_parameter_list ( 'CALL_CALENDER' );
add_parameter ( l_list, 'DTM_SET', text_parameter, to_char ( f_dtm_set, 'dd/mm/yyyy' ) );
end if;
copy ( null, 'global.calender_date' ); --> create a null global
call_form ( 'form_name', no_hide, no_replace, no_query_only, l_list );
if
not id_null ( l_list )
then
destroy_parameter_list ( l_list );
end if;
if
name_in ( 'global.calender_date' ) is not null --> if the global is not null, give the choosen item back
then
l_dtm := to_date ( name_in ( 'global.calender_date' ), 'dd/mm/yyyy' );
end if;
erase ( 'global.calender_date' );
return ( l_dtm );
end;sarah

I'm installing a printer on a MacBook Air via USB connected DVD drive. The computer asks for my password. I don't hink we ever had one. Is there a default password ("admin"

I'm installing a printer on a MacBook Air using an external DVD drive via USB. The computer is asking for my password to authorize changes to the system. I don't htink I ever put one on the computer and "admin" and "password" don't work. Is there a default password? Or a way to change a password that has been forgotten, wothout resetting the computer and wiping everything out? Thanks.

Many thanks. As it happens, I wen to the local Apple Store today for an appointment with a "genius". She helped me reset the password. And as I look at the screens on the page that you connected me to, they're the same as the genius used. So your suggesstion was right on the money, and now I'm all set. Thanks again.

Is there a default jabberlocalconfig.xml location

Similar Messages

Maybe you are looking for