Is there a dependency between source system patch level (IS-U) and BW 7.3

Hello everybody,
we think about upgrading our BW. Now there is the question if there is any dependency between source system patch level (IS-U) and BW 7.3.
Perhaps someone knows a note. I don't find anything.
Thanks

Hello Ingo,
we have also a Problem with the SSO between BOE Server and our BW Portal. Our Systems are in different Domains and we make all settings in BW as described in the SAP Documentation "http://help.sap.com/saphelp_nw04/helpdata/en/a0/88a340fa432b54e10000000a1550b0/frameset.htm"
but now we didn´t know what we have to to on BOE side to install the SAPSSOEXT and to get the corret UME Proberties that we have to put into BW.
Can you help us please on that issue? We can´t find any BOE Documentation for that and we working on that issue now for more then 5 weeks.
Thank you/Kind Regards
Evelyn

Similar Messages

Is there any dependency between third-party adapter and XI system service?

Hi Friends,
I'm developing a thrid-party JCA adapter(deployed under sap.com) on SAP XI? In the adapter, it will use "ModuleProcessor" EJB system service.
I found sometimes if the JCA adapter cannot be started correctly, the other system service also not started. And checking the log, I found the reason the JCA adapter not started, is because the "ModuleProcessor" EJB system service is not started.
so just want to know is there any dependency between third-party adapter and XI system service?
Thanks & Regards,
Jason

Hi soo.richard,
You say it could be intruders cutting in - same problem/solution as for any network I think. Access can be password protected or access limited via MAC address filtering. I'm not sure how Apple Tv works with a hidden SSID but that would be another option.
Airplay itself can be password protected through the airplay settings.
I'm not sure if Apple TV works with other authentication such as a password but maybe the manual will assist with this?
Hope this helps.

Cloning use the different gcc version between source system and target sys

Hi All,
Our system is: Application tier and Database tier is split to two servers.
We should run a cloning, but I found the different gcc version on application tier on source system and target system.
The source application tier server is RedHat Linux ES3, gcc version is 3.2.3
The target application tier server is RedHat Linux ES3, gcc version is 2.9.6
There is the same gcc version on database tier on source system and target system, they are gcc 2.9.6.
My question: Can I use the different gcc version between source system and target system when I run an erp cloning?
Thanks & Regards
Owen

Not necessarily, you might get some errors if the version is higher and it is not supported by the OS. An example is Note: 392311.1 - usr/lib/gcc/i386-redhat-linux/3.4.5/libgcc_s.so: undefined reference to 'dl_iterate_phdr@GLIBC_2.2.4'
To be on the safe side, make sure you have the same version (unless you want to give it a try).

Any standard RFC there to communicate between satellite system and Solman?

Hi Gurus,
Any standard RFC there to communicate between satellite system and Solman?
Thanks in advance.
Regs,
BBR.

following four RFCs are created so as to initiate the communication between the satellite system and the solman system
_READ, _TRUSTED, _BACK, _TMW
but, you have to Read the Links and the Notes too to understand their names and their meaning
http://help.sap.com/saphelp_sm310/helpdata/en/48/647e3ddf01910fe10000000a114084/content.htm
http://help.sap.com/saphelp_sm310/helpdata/en/b3/dd773dd1210968e10000000a114084/frameset.htm
http://www.slideshare.net/wlacaze/sap-solman-instguide-initial-customizing-presentation

PS-Relationship between the system status in wbs elements and activities.

Relationship between the system status in wbs elements and activities.
We have the following requeriment with the system status in PS. We have a project with complete technically status and we want to undo the complete technically status in one activity without changing the complete technically status in the WBS element or the project.
The reason is that after putting the complete technically status, users have to change the values in the P.O. We don´t want "open" all the project and we only need to "open" the activity where the P.O. are in.
Is that possible? How is connected the system status between activities, wbs elements and the project son I can change the status in the below step without changing the higher steps?
Thanks in advance.

Hi Bala
Yes, you have put it rather correctly.
We use WBS elements for booking and posting time (client requirement). So what I am looking for is WBS Elements with the system status TERL (Time and Expense Released).
I talked of the deletion flag also, because a WBS element flagged for deletion can't be used. It's one of the criteria to screen the WBS elements.
I hope it's clearer now.
Vinitha.

Is there any difference between an unlocked Iphone sold in australia and the USA and if i bought one from the USA what would I have to do to use it.

Is there any difference between an unlocked Iphone sold in australia and the USA and if I bought one from the USA what would I have to do to use it.

An unlocked phone is an unlocked phone. It's sold without a SIM card. You have to get a SIM card from the carrier you want to use, with an account set up, insert the SIM and activate the phone in iTunes.
Unlocked phones sold by the USA online Apple store can only be shipped to a US address and paid for by a US credit card
The only difference between an officially unlocked iPhone sold in the US and Australia is the warranty. The warranty is valid only in the country of sale. If you buy the phone in the US and return to Australia, if it breaks you have to ship it to a US resident who will get it to Apple and return it to you. It can't be shipped direct in either direction.

Is there a difference between the charger for the iphone 4 and iphone 4s?

Is there a difference between the charger for the iphone 4 and the iphone 4s?

No. Both should output 5v, 1Amp.

Moving DataSources between source systems

Hi Gurus,
I'm facing problems when trying to move a datasource between two source systems. Here are some details about the situation:
- I created a DataSource based on a DB-Connect source system (Oracle DB)
- I moved this DS to test system where it has been attached to the Oracle-Test-DB.
- Now I'd like to load data in SAP test system from the Oracle-Prod-DB. So I created a new source system in the SAP test environment pointing to Oracle-Prod-DB. Then I updated the conversion of logical systems now changing the source system to the Oracle-Prod-DB. After collecting the datasource and transporting it to SAP test system I noticed that the datasource already existed remained untouched and an additional datasource has been created.
So, can you Gurus share any piece of advice how to change a datasource from one source system to another.
Any help is appreciated.
Thanks in advance.
Heiko

Hi Srini,
Thank you for you´re answer.
I have checked WE20 and W21. The ports and the partner profiles are created automaticly in BW and R/3 sides, when creating the new source system in RSA1.
The main problem is, that the R/3 can´t send data to BW, although the ALE and RFC configurations are setup properly. After I replicated and activated several data sources in BW succesfully, I´m requesting data from the R/3 system with an infopackage, but after a few hours the follwing failure message occurs in the monitor :
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
In the TRFC (SM58) log in R/3 there appears an status text with the following entry:
"No service for system SAPABC client 123 in the integration directory".
For this entry I have found the SAPnote 940313. In this note,there is described how to send Idocs over Integration Server. Now I think that our R/3 system tries to send Idocs over the Integration server too.
But is there another alternative to send Idocs from R/3 to BW without using the Integration server?
Best regards
Mehmet

Moving datasource between source systems

Hi Gurus,
I'm facing problems when trying to move a datasource between two source systems. Here are some details about the situation:
- I created a DataSource based on a DB-Connect source system (Oracle DB)
- I moved this DS to test system where it has been attached to the Oracle-Test-DB.
- Now I'd like to load data in SAP test system from the Oracle-Prod-DB. So I created a new source system in the SAP test environment pointing to Oracle-Prod-DB. Then I updated the conversion of logical systems now changing the source system to the Oracle-Prod-DB. After collecting the datasource and transporting it to SAP test system I noticed that the datasource already existed remained untouched and an additional datasource has been created.
So, can you Gurus share any piece of advice how to change a datasource from one source system to another.
Any help is appreciated.
Thanks in advance.
Heiko

Hi Srini,
Thank you for you´re answer.
I have checked WE20 and W21. The ports and the partner profiles are created automaticly in BW and R/3 sides, when creating the new source system in RSA1.
The main problem is, that the R/3 can´t send data to BW, although the ALE and RFC configurations are setup properly. After I replicated and activated several data sources in BW succesfully, I´m requesting data from the R/3 system with an infopackage, but after a few hours the follwing failure message occurs in the monitor :
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
In the TRFC (SM58) log in R/3 there appears an status text with the following entry:
"No service for system SAPABC client 123 in the integration directory".
For this entry I have found the SAPnote 940313. In this note,there is described how to send Idocs over Integration Server. Now I think that our R/3 system tries to send Idocs over the Integration server too.
But is there another alternative to send Idocs from R/3 to BW without using the Integration server?
Best regards
Mehmet

Connection between Source Systems and BW

Hello,
I´m trying to connect our SAP BI 7.0 system to SAP R/3.
At the following link, the topics for connecting BW with SAP source systems aren´t mentioned in detail:
http://help.sap.com/saphelp_dm40/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
I already have setup and tested the RFC-connections, so I primarly need a step by step description for the ALE settings (Partner profiles,Port, IDoc types,IDoc segments) in the
context of BW-SAP R/3 connectivity.
Thank you for your postings
Best regards
Mehmet

Hi Srini,
Thank you for you´re answer.
I have checked WE20 and W21. The ports and the partner profiles are created automaticly in BW and R/3 sides, when creating the new source system in RSA1.
The main problem is, that the R/3 can´t send data to BW, although the ALE and RFC configurations are setup properly. After I replicated and activated several data sources in BW succesfully, I´m requesting data from the R/3 system with an infopackage, but after a few hours the follwing failure message occurs in the monitor :
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
In the TRFC (SM58) log in R/3 there appears an status text with the following entry:
"No service for system SAPABC client 123 in the integration directory".
For this entry I have found the SAPnote 940313. In this note,there is described how to send Idocs over Integration Server. Now I think that our R/3 system tries to send Idocs over the Integration server too.
But is there another alternative to send Idocs from R/3 to BW without using the Integration server?
Best regards
Mehmet

Are there any differences between using Adobe Illustrator on a MAC and on a PC?

Hello,
I'm about go enroll in a class specialized for teaching Adobe Illustrator in order to be able to use the program at work. The company that I work at uses Macintosh computers to deal with clerical work and everything, so I would like to know if there are any differences between using Adobe Ilustrator on a MAC and on a PC. The school that offers training teaches two types of classes, where one uses Illustrator on a MAC, and the other one on a PC. The PC class is able to have an earlier start date, which is why I'm sort of leaning towards choosing that class as I need to be able to use the software as soon as possible, but if there are main differences between the interface that will affect my knowledge of using Illustrator on a MAC after I take the class with Windows systems, then I will most likely be waiting for the class teaching in MAC systems.
Thanks in advance for the help!
Oh and another suggestion- should I take the Illustrator class in CS6 or CS5?

Reading through the CS5 vs CS6 performance thread, the Mac version seems to have worse performance than Windows version. From a starter's perspective the differences would most likely never be realized. It will take some time to see differences between even CS5 and CS6 other than the visual aspect of course.
Definitely take the CS6 versionso you can say you have it. CS5 is my preferred version, CS6 is garbage with the bugs it has for the type of work I use it for.

Patch levels for Oracle and kernel

Hi everyone,
Can you pls tell what are the maximum and minimum patch levels that can be used for BW 3.5 installation on LINUX RHEL 4 ,
oracle -10.2.0.2 & kernel - 6.4 .
Thanks in advance,
Praveen

hi people,
we have checked for the status of support package in Transaction SPAM traffic signal is still red and in the Phase RUN_SPAU_? it is stuck and even after restarting import it shows clean-up phase is left and it ends with same error mention above
the support package name is SAPKB70014 size is 116266 MB now after restarting the Import the following error message comes
The import was stopped, since an error occurred during the phase RUN_SPAU_?,
which the Support Package Manager is unable to resolve without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: RUN_SPAU_?
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code: 0255
- Error message: Could not connect to semaphore server
we run all the phase in background, and even after entering the support package number in transaction SPAU there it is showing
"No objects within selected filter parameteres"
Q.1 Any idea what went wrong and how to fix that?
Q.2 Is there any problem if we run the all four phases of support package in background or it should be run in dialog
latest tp & R3trans updated?

Is there any dependency between osx version and boot environment???? I can not boot my bootabe software on my macbook pro with osx 10.8!!!!

even i can not boot lion 10.7.4 bootable dvd!!!!!
what can i do??? the boot device will apear in boot menu but they do not boot

Then, I imagine there's a problem with the DVD.
http://www.macworld.com/article/1161069/make_a_bootable_lion_installer.html
It would run a lot faster on another drive or pocket drive.

Is there a link between the HP triple bass reflex sub and the Battery

Hello.
This problemm started just recently. I have Windows 8 and 7 on dual boot.
The inbuilt sub goes off at times and the solution(my own solution) is to remove the battery and then put it back.
What i want to know is is there a link may be in the circuit between the battery and the the sub?
what could cause such behaviour(of the sub going off).is there a permanent solution to this apart from removing the battery?
Hp pavilion dv7 4285dx

Try using this document to locate the tag: http://goo.gl/GDeRb
It could have worn off, depending on how long you have had the notebook and what kind of conditions it has been through.
Also, where did you happen to purchase it from?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Is there any difference between the reader function of Adobe Acrobat and Adobe Reader

I would think, not.
Also, can Adobe Reader and Adobe Acrobat be on the same computer without operational conflicts?
I know there seemed to be an issue with both back around version 8.

That would be a great oversimplification. But in terms of displaying PDFs, with default options, yes it will look the same. The controls won't look the same. Form filling too. But what you can do with a form (e.g. whether it can be saved) varies.

Is there a dependency between source system patch level (IS-U) and BW 7.3

Similar Messages

Maybe you are looking for