Is there a difference between...

... lowering the Out 1-2 fader and using a gain plug-in on Out 1-2 to reduce the gain?
I am trying to always, at the suggestion of many here, leave the Out 1-2 fader at Odb (unity gain.) But for some mixes it seems that I simply cannot do this without overs on the Out 1-2 channel. In this instance what should I do? Lower the Out 1-2 fader or apply a gain plug-in and reduce the gain?
Everything looks good with the Level Meter on Out 1-2 as long as the gain plug-in is above (before?) the the meter.

... lowering the Out 1-2 fader and using a gain plug-in on Out 1-2 to reduce the gain?
When you say "is there a difference" I take it you mean in audio quality, and the answers is no, they both do exactly the same DSP volume process.
Of course there's a difference in that if you have other plugins in the chain, adjusting the gain before those plugins is not the same as adjusting the overall output of the plugin chain with the fader - two different things.
But with just a gain plug on the output channel, it's just adjusting the gain of the signal just like the fader does.
I am trying to always, at the suggestion of many here, leave the Out 1-2 fader at Odb (unity gain.)
This is a legacy practice from early ProTools days I think - there is no problem adjusting the output fader to reduce the final mix level - it's what it's for
Lower the Out 1-2 fader or apply a gain plug-in and reduce the gain?
Either will do, again dependent on where in the chain you want to adjust the gain if you have other master output plugins going on.

Similar Messages

Is there any difference between R/3 4.7 version and ECC 5.0????

Hi All,
Is there any difference between R/3 4.7 version and ECC 5.0 for the transaction RSA5.
Regards,
Andy

Andy
Functionality wise I didn't see any difference other than new datasources in ECC5.0
Thnaks
Sat

Is there a difference between saving a word doc with images as a pdf or printing to pdf?

Is there a difference between saving a word doc with images as a pdf or printing to pdf. Images are sometimes missing when the document is saved as a pdf or they are visible to the document owner but seem to disappear when viewed after submission to grants.gov. and proposal Central.
Using Acrobat 9.5.5 and Office 2010 and Office 2011 Mac

Is there a difference between saving a word doc with images as a pdf or printing to pdf. Images are sometimes missing when the document is saved as a pdf or they are visible to the document owner but seem to disappear when viewed after submission to grants.gov. and proposal Central.
Using Acrobat 9.5.5 and Office 2010 and Office 2011 Mac

Is there a difference between microsoft office for mac and for windows?

As a college student it's important that everything is equal for windows and mac for using instructions. So i am wondering if theres a difference between microsoft office for mac and for windows?

There are differences between the two version of Office. If you need to be exactly like the Windows version, you will have to run Windows on your Mac.
Allan

I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for?

I downloaded Mavericks and it won't install. I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for? I never had an administrator password-- I just hit enter and have never had a problem before with previous installations. I'm on an iMac, from 2007, running Mt. Lion (version 10.8.5). I've been looking for other's posts who may be having the same problem, but haven't found any. Can anyone help?

Ugh. The 'no password, no work' thing is a recent Apple development. I ran into it on my system and ended up having to do a clean install on a partition I fully erased.
I suppose, if you have the ability to, go online and look up how to burn a bootable DVD image. Download the 10.8.4 image then use the Disk Utility to make a boot image of it. You'll need a dual-layer DVD or a USB drive (or memory stick at least 8GB) If you've got an optical drive, burn the disk, if you've a USB device, use that.
Then get a pocket drive and copy your important files off the system or let Time Machine do a full backup.
When the backup is done, insert the disk and hold down the C key until the machine boots off of the DVD. At the point you get to the start window, go to the menu and choose the Disk Utility.
In the Disk Utility, reformat the drive. You go to the actual DRIVE (not the Macintosh HD, but the root above it that is the actual hard drive device)
I always do this and *partition* it into several volumes, the benefit being, you can store all of your music, documents and importans stuff on that secondary storage volume you make - it will have it's own index and then the first volume is where you put the OS and it will have it's own index as well. That way, if the OS throws a wobbler and you need to reinstall, you don't lose your data.
Depending on the size of your hard drive, it is good to give your OS partition at least 60GB and optimally 100GB, and the rest for storage.
Name your volumes, use the little box sliders to manually size them or put that number in the size window, select for the format, Mac OS Extended (Journaled) and hit Apply and then the Disk Utility will quickly create your new partitions.
Once finished, quit the Utility and it will return you to the OS installer. Select the volume you want to install to and it should start up and install.
Once the installation is done, you'll get the new machine startup then you MUST put in a password for the computer. Once you're in, and to the desktop, don't bother with any Mountain Lion updates, go right to the App Store and get the Mavericks update and let it install the app to your Applicaitons folder, then do that install.
On a side note, there MAY be a way to make a disk image from the Mavericks application and avoid the entire Mountain Lion step.. I honestly do not know, but a bit of hitting the search engines may find out if there is. I think that if you looked for "make Mavericks boot disk or boot image' you may find something.
Good luck!

Is there a difference between Adobe Photoshop 7.0 and Adobe Photoshop Elements 7.0?

Is there a difference between Adobe Photoshop 7.0 and Adobe Photoshop Elements 7.0?

Yes: (these are just general differences, not specific to either photoshop 7 or photoshop elements 7)
(photoshop elements does offter one thing not mentioned that photoshop 7 doesn't have, a camera raw plugin that doesn't cost extra)
(photoshop elements 10 and photoshop cs5 are the current versions)
http://simplephotoshop.com/photoshop_elements/photoshopelements_vs_photoshop.htm
http://graphicssoft.about.com/cs/photoshop/f/elementscompare.htm

Is there major differences between ms 5.0 vs 7.0 version?

Hi all,
Is there major differences between microsoft bpc 5.0 version with 7.0 version.
Can anyone pls let me know the technical aspects like and the functional aspects of differences too?
Thanks
Pooja

From a technical point of view, the version 7.0 support SQL Server 2008.
From a performance point of view, you will have better result with BPC 7.0 + SQL Server 2008 than BPC 5.1 + SQL Server 2005.
Sincerely,

Is there any difference between Regular SAP Cert / SAP TechEd Cert

Hello All,
I need to appear for the following Certification:
SAP Consultant Certification Technology Consultant SAP NetWeaver04 - SAP Web AS for ORACLE (WAS 620, Oracle 9)
Is there any difference between regular SAP certification and Certification at TechEd (- except certification costs)
Regards,
Ammey Kesarkar

No. It is just the certification exam is offered at SAP Tech Ed event.
Regards,
Jai Shankar

Is there a difference between Lightroom CC and Lightroom 5.7?

Is there a difference between Lightroom CC and Lightroom 5.7? If so, is the upgrade from Lightoom 5.7 to Lightroom CC for free?

Yes the two programs are different. Lightroom CC has a number of new features added to it. They include HDR and panorama creation, brushes for the graduated filter and the radial filter, face recognition, support for new cameras, just to mention a few. Lightroom CC is a free upgrade for those who have subscribed to the creative cloud plan. Lightroom 6 (the standalone version) is a paid upgrade. The price is $79.

Is there a difference between the Ethernet WAN port and the other 3 Ethernet Ports on a Time Capsule?

As posted previously, my time capsule will not set up properly because I get an IP address conflict pop up window. Is there a difference between the "Ethernet WAN Port" and the other three ports on the back of the Time Capsule? I may have the DSL modem hooked into the "Ethernet WAN Port". Thanks.

it depends what you want to achieve and what configuration you have on your DSL modem/router.
Resetting TC and run connection wizard from the Airport utility.
Post the problems.

Is there any difference between the 2 different USB cords when syncing???

I know this may be a paranoid question to ask but I just wanted to make sure.
Is there any difference between the newer USB cords with the shorter plug (the end that goes into the iPhone) and the older ones with the bigger, square-shaped plugs that you can pinch on the sides to retract?
Is there a difference in transfer speed, syncing speed, or reliability, or build quality?
Just asking cuz the newer USB cord that came with my iPhone 3GS is getting frayed and so I'm using the older one instead.
Thanks to whoever helps.

No difference except, as you noted, you have to squeeze the older one to remove it. It's important that you do that so you don't damage it or the iPod.

HT1604 Is there any difference between Mac OS Extended Format and ExFat?

Is there any difference between Mac OS Extended Format and ExFat? I read in a blog that the ExFat was a good way to format an external drive because it avoided many of the pitfalls of the other formats, as long as it is supported by the operating system. I tried to format my new Seagate drive, and got an invalid option error. I was able to format it in Mac OS Extended format. Can you please tell me if this is similar to ExFat. Thanks.

The Mac OS format can only be natively read to and written to by a computer running the Mac OS. This creates a problem if the user wishes his external, or other drive to have seamless compatibility between two different OS's, such as Windows and Mac. Yes, there are software solutions that enable a Windows PC to work with a drive formatted as Mac OS, but it gets complicated if you wish that drive to have compatibility "on the fly" with any PC you may encounter.
It turns out that the format known as ExFAT is able to be natively read by both a Mac and a PC, without running any additional drivers on either machine. ExFAT also doesn't have some of the limitations of FAT32, which both OS's will also read/write.
ExFAt is not perfect though. Formatting the drive as Mac OS Extended has some advantages on a Mac. First, it is the only format that permits all functionality of the Mac OS, such as using the drive for Time Machine.
ExFAt is often thought of as the best middleground for an external partition/drive that needs to have easy cross platform compatibility between a Mac and PC running Vista or Windows 7.

Is there any difference between the digital connection cables?

Is there any difference between digital connection cables that connect to the back of a computer? I've seen some with two groups of nine pins and a blade. I've seen some with a solid group of 27 pins. I've seen the blade pin and the four pin. I currently run one that has two groups of nine pins with a blade pin. I use it for DVI and it does ok. I wanted to look into the HDMI cable and see how or if things would be different. I bought a cable that has the 27 pin connector with a blade. It physically connects but there is no signal. I checked the monitor and I set it first to HDMI and then tried AUTO. It made no difference. I powered it all down and restarted it all and there was no difference. Do I need to keep looking for a cable that has the same design connection to the PC but has the HDMI connection on the other end. I may have this info wrong. I just know I have two large connections at the time but the last cable I tried had one large connector and one that looked like an advanced USB design. And then is there really any gain between the two as far as video quality or response?

There are several type of connectors/cables with different effect.
VGA
DVI
HDMI
To understand more, I would say please look it up.
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Is there Any difference Between OBPM 10g And AlBPM 6.0

Hello Friends
I would like know is There any difference between the Oracle BPM 10g and ALBPM 6.0 . ??
The second one is Difference between AlBPM5.7 and ALBPM 6.0
Thanks In Advance
with Regards
Sandeep
Edited by: user12036530 on Oct 18, 2009 9:08 PM

For 10g Differences, check out: http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/upgradeguide/deliverables/upgrade_guide/c_Head_Reference.html
And other 10g Documentation: http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/index.html Specifically: Upgrade Guide, Process API Differences (if you use PAPI)
For 6.0 Differences, check out the Documentation: http://download.oracle.com/docs/cd/E13165_01/albsi/docs60/index.html Specifically: ALBPM 6.0 New Features Overview
Hope this helps,
-Kevin

Is there a difference between SPDIF Optical and Digital Optical

i want to connect my tv's audio output to my home theater
i have a vizio tv, on the back of it, it says SPDIF OPTICAL OUT
and on the back of my panasonic home theater system it says, DIGITAL AUDIO IN, i tried connecting an optical cable and the sounds from my won't still go through the home theater system speakers.
i'm just wondering, is there a difference between SPDIF OPTICAL and DIGITAL OPTICAL?
ports look like the same.
Solved!
Go to Solution.

smileemile wrote:
i want to connect my tv's audio output to my home theater
i have a vizio tv, on the back of it, it says SPDIF OPTICAL OUT
and on the back of my panasonic home theater system it says, DIGITAL AUDIO IN, i tried connecting an optical cable and the sounds from my won't still go through the home theater system speakers.
i'm just wondering, is there a difference between SPDIF OPTICAL and DIGITAL OPTICAL?
ports look like the same.
Nope, two names for the same thing.
You may have to change some settings of either the TV or the Panasonic system to output to the optical port (TV) and input from the optical port (surround receiver).
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Is there a difference between mono & stereo when recording with single mic?

When creating an audio track to record vocals through a single condenser mic, is there a difference between selecting mono or stereo? if so, what's the difference?

MaeMarquez wrote:
When creating an audio track to record vocals through a single condenser mic, is there a difference between selecting mono or stereo? if so, what's the difference?
Assuming your source is mono, there will be no sonic difference, and recording to a stereo Logic track will simply waste disk space. If you have a stereo microphone (i.e. it's actually a pair of mics packaged together), then it makes sense to record in stereo. If you're using a standard single microphone, record to a mono Logic track.
-James

Is there a difference between...

Similar Messages

Maybe you are looking for