Is there a document about which safari version support h264?

I used http://html5test.com to test safari, and found that:
some version of safari is not support h.264(as below image), and some is support h264.
So i want to know is there a document about which safari version support h264 and which version is not support?

Hi Claude,
If you have market place user access, then go to the following link, which is the PAM of Data Services 4.2
https://service.sap.com/sap/support/pam?hash=pvnr%3D67838200100900005703%26pt%3Dg%257Cd
Anyhow also go through the PAM of Data Services 4.1
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/50bf92df-e586-2f10-588f-95ff347211ba?overridelayout=t…
In the above document, page 10, its mentioned SYBASE 15.7 is compatible.
So probably for the latest version of data services, Sybase 16 should also be hopefully compatible.
Once you get through the PAM of DS 4.2, do update here!!
Regards,
Mubashir Hussain

Similar Messages

Which database version supports replication for 120000 records/table

Hello everyone,
I am being asked about which DB version supports replication for the case where the number of records exceeds 120000 per table (probably more). I never used replication before so I can't give advice about it.
Should SE one be used? SE, or EE?
Advice please, if possible some references as well...
yours

Either version will support more than the number of rows mentioned above. With replication there are many choices but with Standard Edition, it becomes more limited. I worked for Quest Software and we have a product called SharePlex which is an Oracle replication tool which support both Enterprise Edition vs. Standard Edition. We even have a special pricing for Standard Edition as well.

Is there a way to download Safari version 7, 6, or 5 on a OS X v10.4.11 Tiger?

Is there a way to download Safari version 7, 6, or 5 on a OS X v10.4.11 Tiger?

No. The highest version of Safari you can run on v10.4.11 is Safari 4.1.3.
I have an iBook G4 running v10.4.11 and Safari 4.1.3.

WLC: which software-version support SHA2 certificates for Web Authentification and Web Management ?

Hello,
I tried to install new SHA2 3th-Party certificates on our WLCs. There are old WiSM1-Boards and 2504 to support our old 1230 Access Points, running 7.0.251.2, which didn't install it, although the config manual for 7.6 and 8.0 say that SHA2 certificates are supported since 7.0.250.0. When I tried to install the SHA2-certificates I get the message "File transfer failed" an the log says:
*TransferTask: Dec 12 13:22:14.394: #UPDATE-3-CERT_INST_FAIL: updcode.c:1869 Failed to install Webauth certificate. rc = 1
*TransferTask: Dec 12 13:22:14.394: #SSHPM-3-KEYED_PEM_DECODE_FAILED: sshpmcert.c:4085 Cannot PEM decode private key
I tried to install the same certificates on our WiSM2-Boards, running 7.4.121.0 and I failed too. The same certificates could be installed on a 2504 running 8.0.100 without any problems.
In all 3 cases I tried to install unchained certificates for web management and Level 3 chained certificates for web authentication. I used the following guides to get the certificates (e.g. taken from the config manual 8.0.100):
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.pdf
Which software versions support SHA2 certificates and which didn't ? Is the a list for it ?
Regards

Hello,
I solved the problem. First I used a Debian Linux system with Openssl 1.0.1. After I searched the internet using one of the log messages above I found sites which mentioned to use Openssl 0.9.x. So I tried a productive and security fixes Debian Linux System running Openssl 0.9.8 and I succeeded. The wlcs accepted the certificate files and used it after a reboot. The Web GUI still shows a SHA1 Fingerprint, but the certificate signature Algorithm is SHA2:
Signature Algorithm: sha256WithRSAEncryption
When you check the openssl.org homepage Openssl 0.9.8 is still one of the actual version of openssl and is still available and fixed. But the Openssl Roadmap says:
"We don't want to have to maintain too many branches. This is likely to include a timescale for the EOL of version 0.9.8"
I don't know the differences between certificates made with openssl 0.9.8 and 1.0.1. Is there anybody who can explain it to me ?
Regards

Which obiee version supports windows 7

which obiee version supports windows 7 ??
Is there any patch available for obiee version 10.1.3.4.0 to supports windows 7 ??

[email protected] wrote:
which obiee version supports windows 7 ??None. Get a VM and install it under XP or Linux.

Which IOS version supported EEM?

Hi
May I know which IOS version supported EEM (Embedded Event Manager) ?
we are using 2960 and 3750. Does c2960-lanbasek9-mz.150-2.SE5/c2960-lanbase-mz.122-35.SE5 support?
hugo

EEM supported on 3750:-
http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-software-releases-12-2-special-early-deployments/product_bulletin_c25-614546.html
But as leo said its not on 2960.

Computer is confused about which OS version is running (!)

... and so am I.
About This Mac reports 10.4.6
however, apps that are installed, like Safari, are ones associated with earlier versions of 10.4.
And Software Update wants to update me to 10.4.11.
This is after a clean reinstall. Any ideas?

About This Mac reports 10.4.
Then that is what are running.
apps that are installed, like Safari, are ones associated with earlier versions of 10.4.
Then you have never updated them.
Software Update wants to update me to 10.4.11
And so you should! But do it properly:
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/downloads/MacOS_X_10_4_11_Combo_Update__PPC
And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

There is a website which requires version 3.6 how can i get it? My operating system is Snow leopard

I am trying to fill out a documant and it says that for my version of the Mac OS, 10.6.8 snow leopard and need a 3.6 version of firefox

You can install the portable Firefox 3.6 version to access websites that do not work with Firefox 5+.
*http://www.freesmug.org/portableapps:firefox#toc1
*http://sourceforge.net/projects/osxportableapps/files/Portable%20Firefox%20OS%20X/
See also this article about how to install multiple versions on Mac OS X:
* http://www.businessinsider.com/how-to-run-firefox-4-and-3-simultaneously-in-mac-os-x-with-multiple-firefox-profiles-2011-3
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Is there any plan about new EA version or releas of Creator 2

Hi
Is there any plan for releasing a new version of Creator 2 ?
Either EA or final ?
Thank you

Check the EA discussion forum, there is a new post under Creator 2 EA updates.

Is there any news about the other version of new iPad 4G?

I really want to use 4G or 3G version of iPad in my city(Hong Kong).
But it seems that Apple do not want to launch any 4G or 3G version of iPad.
I hate wifi version !

You will just have to wait for Apple to announce availability, no one on here knows their plans. All we can do is be patient.

Safari is refusing to close, there are always crashes. Safari Version 5.1 (7534.48.3)

I am not able to click on a certain tab. When ever i click on it, try to close it or close the whole window, Safari crashes and I get an error. PLEASE help!
Thanks in advance.

Apply Flash update:
http://get.adobe.com/flashplayer/
Apply Java Update:
http://support.apple.com/kb/DL1421

Which Illustrator version supports I-Mac OS 10.6.8 2 Ghz Intel Core Duo?

I am looking to purchase Illustrator for my old I-Mac. Which version can I buy for OS 10.6.8 2 ghz Intel Core Duo? Any thoughts?

kathylova wrote:
I thought that too, but it looks like the Intel Core duo is not supported. Frustrating!
for CS6? I had a 2008 core2duo MacBook running CS6 until last year. it runs fine.
edit: ohhh, original core duo! sorry, misread. don't know about that one.

Which mySAP version support Adobe 8.0 and IE7 to show PDF forms

Hello,
I would like to know what is the mySAP (HCM) version and support package level which supports using PDF forms if the Adobe Acrobat or Adobe Reader is 8.0 and if Internet Explore is version 7.
We are trying to view (static forms so far) HCM related PDF documents by using PORTAL. The current version (SAP + plug-in) does not support Adobe 8.0 --> forms cannot be used.
A promt answer is highly appreciated.
BR,
Pipsa

Neha,
Thanks for the response.
We are running acroread headlessly since it is on a remote server that we access via telnet. Without an XServer session, I can't tell whether acroread is able to read and display the PDF files normally. However, we can view the PDFs with Adobe Reader 8.1.2 on Windows and the acroread -toPostScript command-line that we are using does work properly with other PDFs.
I will email you a copy of a problematic PDF shortly.
Regards,
Steven Dickson

Which recent version supports VI(4.0.2)?

I have a old test machine of GEOTEST. I downloaded LabVIEW drivers from their web site while installing LabVIEW 2009.
When I open a VI in LLB, LLB Manager says that LabVIEW version is too old, LabVIEW Load Error Code 10.
Which version is the lastest version that supports VI 4.0.2?

According to this, the latest version that will open 4.x is 8.2.x.
If you do not have 8.2.x, then post the VIs and ask if someone can convert them for you.
You might want to think about posting to the LabVIEW board. This Counter/Timer board is not really appropriate.

What is the later Safari version supported on Mac 9.2

Hi, I am testing an application on Mac OS 9.2 and I want to know what is the latest version of Safari that I should use for this OS platform.
Your advice is well appreciated. Thank you.

monkeycanfly,
Unfortunately Safari has not been released for OS 9.2.
Web Browsers Present and Past is a good summary of what is available.
;~)

Is there a document about which safari version support h264?

Similar Messages

Maybe you are looking for