Is there a download for upgadeing from 10.3 to 10.3.9?

I had to just do a reinstall and I need to upgrade but I can't find the download.

Hi beenhacked,
As Michael posted you want that combo update. The 10.3.9 Combo has all the point updates packaged in one download saving incremental updating.
Upgrades and updates are different. Upgrades are what you do when you upgrade the OS to a new version of the OS such as 10.2 Jaguar to 10.3 Panther or to 10.4 Tiger or 10.5 Leopard. The incremental point updates such as 10.3 to 10.3.1 or 10.3.2 etc. are referred to as updates. Updates normally do not include new features but rather enhancements/compatibility issues to the OS you are using and security fixes whereas upgrades will have many new features such as Leopards "Time Machine" or the introduction of "Dashboard" in Tiger etc.
just wanted to clarify if you were confused by updates and full "upgrades" to the OS.
Remember to repair permissions using Disk Utility in your Applications>Utilities folder before and after the download of the 10.3.9 Combo that Michael linked to and you should have a much smoother update.
Additionally, have a look at "Software update, upgrade--what's the difference?"
good luck,
littleshoulders

Similar Messages

  • Is there a download for the Apple Hardware test 3A126?

    Is there a download for the Apple Hardware test 3A126? I get a gray screen for several minutes until start up, Tried holding down the "D" key but no test, there is a disc stuck in the superdrive so I can't use the install DVD.

    You can only run the Apple Hardware Test from the correct Disc that came with your system. see > Intel-based Macs: Using Apple Hardware Test
    Have you tried the following > The ultimate guide to ejecting a stuck disc
    or > Eject a stuck disk from your Mac DVD super drive to get the stuck disc out?

  • Is there a download for lightroom2.7 that will allow it to use camera raw for a Canon T3i raw files?

    Is there a download for lightroom2.7 that will allow it to use camera raw for a Canon T3i raw files?

    Greylensmanta wrote:
    Thank you for the imput.  I don't know what you mean when you say LR doesn't use Adoble Camera Raw.  My LR2.7 is able to process raw files from my 20D.  I don't care if it does it with ACR or some other processing software.  The issue is whether whatever software is used by LR can be updated to deal with new camera raw files.  It is pretty annoying if it cannot be.  I would even pay a reasonable amount if that were necessary.
    ACR is a plug-in for Photoshop and Photoshop Elements which enables users to work on raw images from supported cameras. All of that technology that is in that plug-in is part of the Lightroom program, the plug-in is not used by Lightroom. ACR must be updated approximately 4 times each year in order to add support for new cameras and to make other changes in the plug-in. In order to get those changes in Lightroom, it is necessary to upgrade the entire Lightroom program. Interim releases are made available to Lightroom users who have purchased the program. For instance, if you purchased Lightroom 2, then versions 2.1, 2.2, 2.3, etc. are all available to you at no cost. But when Lightroom 3.0 is released or 4.0 is released, then it is necessary for you to purchase an upgrade in order to continue to get the updates.

  • Is there an update for bridge from cs4

    Since I'm having trouble with my new cs5 suite I was wondering if there were updates for bridge from my old cs4.  I need an update to support a new camera.

    Bridge does not "support" camera models. Only ACR (Adobe Camera Raw) does.
    The last version of Bridge for CS4 is Bridge 3.0.0.64 and the last version of ACR for Photoshop CS4 is ACR 5.7.
    If your camera is not supported by ACR 5.7, you would have to download the free, stand-alone Adobe DNG Converter 6.4 and convert your raw files to DNG raw files with it.
    Bridge is just a file browser.  It does not open or edit files, it just hands them over to the appropriate editor, whether that be ACR, Photoshop, Illustrator, Acrobat or even MS Word.  Bridge depends on ACR to bui8ld the thumbnails and previews for raw files.
    Incidentally, there is a dedicated Adobe Bridge Macintosh forum:
    http://forums.adobe.com/community/bridge/bridge_macintosh?view=discussions&start=0#
    Wo Tai Lao Le
    我太老了

  • Can I download to two of my computers? Is there a download for Mac os 7-1-3

    Can I download to my two IMac Computers? Is there a download  for Lion 7.1.3?

    Hi,
    It can be done with CS5 as long as it is a full version of the software, which has not already been installed on 2 computers.
    Your computer should also meet the minimum system requirement for the specific product for installation to be successful.

  • Is there a download for Adobe Reader 11?

    Is there a download for Adobe Reader 11?

    Reader 11 isn't supported for Vista (although it has been succesfully installed).
    To get it, you need to choose the option for a different language or OS and select an OS that is supported. Then it wil give you the option to download 11.
    But again, not supported.
    See this thread: http://forums.adobe.com/message/4780542

  • How do I get a serial number for Audition 3 downloaded for free from Technet ??

    How do I get a serial number for Audition 3 downloaded for free from Technet ??  I.ve been going around in circles with Adobe for over an hour !!

    Most downloads are free, but serial numbers usually cost money.  I don't know what Technet is, but if they are not Adobe and are offering something for free then you probably want to pursue them instead of Adobe.

  • The download for update from 2.0.0.0 to 2.3.0.0 fails

    The download for update from 2.0.0.0 to 2.3.0.0 fails

    I had exactly the same problem as you describe, except I did not also try the update through DM. 
    On the advice of some folks in another forum, I tried a different WiFi connection instead of my home WiFi connection.  I went to a local bookstore and used their WiFi for the update, and it worked perfectly on the first try.  I'm not sure why, as the download seemed to be successful at home, and the failure was during installation, but it worked.  So give that a shot.

  • Is there a download to upgrade from Mac OS X to OS 10.2.8?

    Hi - I know this might not be the right forum, (sorry...), but don't see what forum might be right so taking my chances here
    I'm running OS X, (10.0), and need to upgrade to 10.2.8...is there a download or series of downloads for this upgrade?
    thanks
    N.

    Hi, nln -
    Welcome to Apple's Discussions.
    No, there is no download available to make that jump. You will need to acquire a copy of the retail package for OSX 10.2 (Jaguar), and make the install from it. Note - there is no point in doing any earlier base version of OSX than the one at which you want to be.
    One of the sites that carries the OSX 10.2 retail package is -
    http://store.yahoo.com/hardcoremac/index.html
    <hr>
    The proper forum for your question would have been the Mac OS X v10.3 Panther & Earlier forum; you can access its category page here -
    http://discussions.apple.com/category.jspa?categoryID=161
    You would need to select an appropriate forum from the list in the upper section on that page before you can post a Topic.

  • Is there a download for itunes that runs on windows xp 64-bit

    do you have an itunes download for windows xp
    64-bit

    No, there is no 64 bit version that will run on XP.
    However if you are prepared to to some hacking, some people have got ot to work.
    Here is an example:
    http://skunkwerks.wordpress.com/2008/04/13/getting-itunes-to-work-with-windows-x p-x64/
    You may find others with Google.
    iTunes itself  is a 32 bit application, the 64 bit installer has 64 bit drivers.

  • Is there a download for Tuxedo12c_32bit_VS2013

    I see on the Oracle Tuxedo12 download page that there is a Tuxedo12.1_32bit_VS2010 client download.
    Is there a Tuxedo12c_32bit_client download for VisualStudio2013?
    update:
    i want to install Tuxedo12c on a Windows 64bit machine with WindowsServer2012 OS , Oracle12c DB, and MSVisualStudio2013.
    I want to link in header files and libs to our 32bit based application.

    Hi,
    As far as I know there are no Tuxedo kits that support VS2013.  If you need this, please submit a request through My Oracle Support.
    Regards,
    Todd Little
    Oracle Tuxedo Chief Architect

  • Is there a download for the CS6 updates? I can only find individual app updates.

    I need to download an update for CS6 so I can create an update package using AAMEE 3.1. I am only finding downloads for the individual apps that are in the CS6 suite.

    Is Design Standard the same as In Design?
    I see this update "Adobe InDesign CS6 8.0.2 update"
    Adobe tells me I need to update all the apps in the Design Standard CS6 to get rid of the Adobe signin that comes up with 32767 days left messgae.

  • Is there a charge for texting from ipod touch to non apple phones?

    My kids have ipod touches and a couple of their friends have cell phones they are texting to.  Is there a charge for this?  They do have Textie, but I don't think all of the kids have that on their phones.

    It depends what application you are using. The standard Messenger application that comes with iPod 5.0 Software can only messenge iPod to iPod. A third party application, such as textPlus, (which I use) can text to phones for free, with internet connection. The incoming text dosn't charge the recipient. So it is, as it says, free texting.

  • Firefox froze with last update, I have PowerPC with Leopard on it, is there a download for older version

    My tech told me to delete it and download a new Firefox and its 7.0.1 and it has a white circle with line through it. I noticed it says you have to have a Intel Processor, I don't, mine is PowerPC. Can I get a link to download the older version that will work on my Mac with Leopard OS. It was working fine until 9/16 when I got caught in a loop after the update and only way out was force quit. Each time I'd open, it would do same thing.

    http://mac.oldapps.com/firefox.php?old_firefox=108
    I tried 6.0, 6.01, one of the 3.6's, 4.0 and a 5.0 and they all come up with the white circle and bar thru it. Someone told me to go to:
    Firefox 3.6.x is the last version from Mozilla for PPC Macs.
    http://www.mozilla.com/en-US/firefox/all-older.html
    For older Macs that aren't supported in Firefox 4 / 5 / 6 /7, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 .
    http://www.floodgap.com/software/tenfourfox/
    http://code.google.com/p/tenfourfox/downloads/list
    and the tenfourfox will download but you can't get it out of the download folder to put in apps.
    I'm fully confused. Some of them even though it says its a lower verson, when it finishes it says its 7.0.1. You would think that there would be something in there that would check, if there wasn't an intel processor, it wouldn't have downloaded and mess up my Firefox software so I can't use it.

  • I can't open the software download for UniversalBrowser from Canon

    I just bought a Canon VIXIA HFR400 and to transfer mp4's to my computer I need to instal UniversalBrowser but it goes to open and then doesn't each time I click on it to instal. Is there something I'm doing wrong?

    What version of Photoshop are you running?  You will need at CS5, CS6, CC or CC2014.  Each version needs a different ACR-plug-in to open files from that camera.
    If you are on CS4 or earlier, you'll need to upgrade—or, in the alternative; look for, download, instal, launch and run the free, stand-alone DNG Converter 8.6 on each file of raw NEF files to convert them to raw DNGs first so you can open them in your version of Photoshop and ACR plug-in higher than 2.4.

Maybe you are looking for