Is there a driver for the ZEN Mic

ok so like my friends Zen Micro died and i offered to take a look at it, i beli've its the?5 GB one it could be the 8GB but its not the photo one, when i connect it to my computer it says it needs to find the driver, so i say it can look through the internet for the driver but it does not find it so for fun i try my CD that came with my Vision:M as they might share a driver i dunno it was worth a try but nope nothing, so i have been googling the driver and cannot find it, so my question is where can i download the driver or software or whatever i need cause obvioulsly this MP3 player is not plug and play so yah a link would be nice thank you so much.

ok so i finally found the driver and my computer finally recognizes it but now my computer is lagging it took forever for the media organizer to finally open and anything to do with the player takes a long time to load up, im trying to fromat the player to start from scratch any idea i downloaded the firmware thingy and i choose english and ten nothing happens....

Similar Messages

Windows 7 64 bit driver for the Zen Vision M?

- Where EXACTLY can I find the Windows 7 64-bit driver for the Zen Vision M? My new computer came with it installed in Windows Media Player 2, but the driver became corrupt. I can't seem to find that driver on the Creative or Microsoft download websites. Please Help!

The driver is nati've to Windows. Creative does not write the MTP driver. I would suggest re-install WMP2 or contact Microsoft for advice if it is corrupt. As for software to use the player on a 64 Win 7system? there is nothing for the Vision M. You may want to read this page? http://support.creative.com/KB/showarticle.aspx?sid=605&h=3

External Charger For the Zen Mic

will there be an external charger for the Zen Micro? So you can always have a juiced up battery ready and willing to go? =)

I think it's a huge inefficiency to require that the player be out of commission during the battery charging.
An optional external charger would remedy this problem and would make having a second battery the seamless way to have constant connectivity.
As it stands, you can't use the player for 3+ hours while it's charging.
These proprietary batteries that are only chargeable via Creative products are confining and non-user-friendly.
An optional external charger would make this player much more usable.
PS - otherwise - I LOVE IT!!!

Firmware Maddness for the Zen Mic

Is it just me or is this firmware business out of control for the Zen Micro?
Having a .0 series and a 2.0 series at the same time is creating way too much confusion!
Aren't MP3 players supposed to be replacing portable CD Players and Cassette Players? Well the coolness factor is there, but the user experience has some serious room for improvment.
The common person would have no clue what the heck to do with all these firmware downloads. Even the descriptions of the firmware would be very confusing for most people getting into MP3 players for the first time. I am very happy with my Zen Micro and am using Windows Media Player as my Music Manager without any problems. I guess I am supposed to wait for the new 2..02 beta to get "un-betad" instead of downloading the new .02.05 but that's just a guess at this point. There are a ton of MP3 players out there with more features and a lower price than iPods, but they still don't come close to outselling it. That's because its the ease of use, not necessarily the features that separates iPods from the rest of the pack. Hey Creative, dummy these things down and watch your sales go up! You will reach a whole new set of customers if you do!

I agree, I'd like to see creatives mp3 players and napsters service to be a profitiable and long-lasting business because I think this way of finding and listening to music is wonderful.. but the firmware updates/formatting the dri've/and all this other technical stuff is a little bit much for the average person to deal with. Also the newest non-MTP version has a bunch of new fixes which the newest MTP version apparently doesn't even have but they both came out the same day or so? I dont understand that.

Is there a driver for the thunderbolt ethernet adapter on a 2010 Macbook Air?

The thunderbolt ethernet adapter is not being recognized on my 2010 Macbook Air running 10.6.8. Is there a driver for it?

That's because there's no thunderbolt port on the 2010 MBair. You need to buy the USB ethernet adapter.
http://store.apple.com/us/product/MC704ZM/A

Is there a driver for the PXI-8310 that works with Windows 7?

The only one I can seem to find is for XP.

Hello LouisTI,
Unfortunately there is not a Windows 7 driver for the PXI-Cardbus8310, as this is a legacy device which is currently going EOL (End of Life). The XP driver for the 8310 (which you may already have found) can be downloaded here:
http://joule.ni.com/nidu/cds/view/p/id/370/lang/en
If using Win 7 is critical, we recommend the PXI-ExpressCard 8360 as a replacement for the 8310:
http://sine.ni.com/nips/cds/view/p/lang/en/nid/202294
Hope that helps!
James M. | Applications Engineer | National Instruments
James M. | Applications Engineer | National Instruments

Arm strap for the Zen Mic

I'd like to take my Micro to the gym, but I need an arm strap because I'm afraid of bumping the unit with a weight if I were to clip it to my waist.
Could anyone recommend a good arm band/strap that will fit the player snugly? Anything specifically made for the zen micro (5gb) would be a plus.
Thanks!
p.s. I won't be able to check this board too often. If you have a suggestion and would be so kind, please e-mail me at [email][email protected]][email protected][/url]. Thanks again.

I got one of these
http://www.tunebelt.com/ab4
which is pretty good and very affordable. Good service from them as well!
As it says it was intended for ipodmini but also fits the Zen Micro.
jake

A question about the Flash intro for the Zen Mic

Message Edited by davidz on 09-0-2005 09:42 PM

davidz wrote:Hello: This is going to sound incredibly stupid, but I want to know where the music on the flash for the Zen Micro is from. The music is very soothing and I tried looking in the source code for a media file.. but to no avail. If anybody could tell me, I'd appreciate it. Thanks a lot. - David.
I don't know but I bet this is what you are looking for: http://home.ripway.com/2005-4/282720/microflash.wav (on the flash its a 7second song that just repeats) well thats what you were looking for.~Derek

How long is the warranty for the Zen Mic

Can anyone tell me how long the warranty is for the Zen Micro? Thanks!

SSR,
The year/90 days warranty is our standard for PDE devices to my knowledge. It does happen to be the warranty in the US; however some countries have laws requiring different warranty lengths. We don't do any warranties on current PDE products that are less than this to my knowledge.
Jeremy

Where is the driver for the Zen Creative 4GB mp3 play

When I installed everything on the CD and plugged the mp3 player into my Vista computer it said 'looking for driver' and never found it. I have not been able to find the driver for this type of player anywhere.
It worked fine on my brothers computer, which also has Vista. He got his computer after mine, and has Athlon processor as opposed to my Inter Core 2 Duo. Can't see why that would make a difference.
here's the walmart link, so there is no misunderstanding about the player I am using:
http://www.walmart.com/catalog/produ...uct_id=7789723

I think Creative should add the Sleek Photo to the player list in downloads and add the latest version there (I have version .0.0e). I ordered my player in December (for Christmas). There are a few issues that I have addressed in my "A few annoyances with Zen Sleek Photo 20GB (Request)" thread.
Sadly there has not yet been an update to fix the artist listings etc. as mentioned in my thread
I got in contact with another Creative Zen Sleek Photo user who also li'ves in Switzerland and has the same problems (tracks not been sorted correctly even with correct ID3 tags, which work in many many Windows applications).
By the way, sadly the Sleek Photo gets a load of dust under the screen too, unless you are very careful. I have been unable to remove most of the dust even using compressed air! I would rather not have to get it replaced because of this (unless Creative makes a slightly new casing model to prevent dust under screen) as I would probably end up paying rather a lot for postage (it's going indirectly through another company)
I hope there shall soon be a firmware update addressing these things,
Thanks for any response to this,
StephenRMessage Edited by StephenR on 03-07-20060:53 PM

Is there a driver for the apple genuine dvi to composite adapter to make it work on Maverick OS?

Im having a problem with a few parts to it but the main problem is my Apple Genuine DVI to Composite is no being recognized correctly. & not allowing me to mirror or multiple screen or anything. It wont even broadcast a signal to the secondary screen or anything. This all started when I upgraded to Maverick OS. I'm pretty sure apple has a driver for this problem. Can anybody point me to where I can find it?
Thanks in advance!

Hi there djshotgunn,
There is not a specific driver that you would need to download outside of Software Update. I would recommend taking a look at the troubleshooting steps in the article below if you are experiencing video issues with an external monitor.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Many common display issues can be resolved easily by making sure the software on your Apple computer and the firmware on your video adapter, display and Thunderbolt cabling is up to date. Check for updates for Apple products by using Software Update, the Mac App Store, or visiting Apple downloads. Check with the manufacturer for any updates that may be available for displays, extenders, or adapters not made by Apple.
-Griff W.

How about a hard-shell case for the Zen Mic

I recently bought my Zen Micro and the one accessory that I still need to pick up for it is a case. Now I know there is a pouch for it, but what I really want is a something more protecti've to put up with the rigors of travelling.
I see they have the leather case which covers the entire unit and looks to currently be the best bet to offer some overall protection of the unit. But what I can't seem to find (either through Creative or a third party) is a hard-shell case. I'd love to have a good, solid clamshell-type of case (either hard plastic, or even metal) like you can get for PDAs. I've got a metal case for my Palm and I'm sure its been that device's best friend in terms of protection from all of the bumps and bruises of travel.
So if anyone fm Creative is peeking in here - that's my big suggestion for you all.
An if anyone knows if such a case does exist, please feel free to post back.

Gee I never would have thought about using a search function to do a search ;>
Yeah I saw this a few days ago - thank you - but its not quite what I'm looking for. If I wasn't clear, I am looking for a hardshell case that completely closes up the unit. This one is cut open on the front for access to the buttons. I was looking for one similar to the leather case where the entire unit is fully enclosed, basically with the only opening being for the headphones.
I do like the earbuds offered on this website - the ones with the little lapel clip spool.

Is there a driver for the HP W2371d for osx 10.7.5?

Is there any way I can use the HP W2371d monitor on my MacBook Pro running OSX 10.7.5?

On first reading, I thought you needed a driver for an HP Printer.
The Mac does not use special Drivers for ANY display. It uses one Driver that is heavily parameterized.
Your display must be connected properly and include the pins for the Data Side Channel. At Startup, the Mac sends a query to the Display asking "what is your name and what are your capabilities?" Driver parameters are adjusted automatically in response to that query -- no additional downloads are needed or are useful.
The proper procedure is:
Plug it in.
if your Mac does not immediately recognize it, use the (Detect displays) button.
If it does not work post back with your exact model of MacBook, what version of Mac OSX[ 10.7.5], what display card you are using if you have separate display cards, what port you are attempting to connect {Mini DVI, DVI, Mini DisplayPort/ThunderBolt} , and what cables and adapters you are using.

Is there a driver for the l80 faxphone printer that will work with Vista home edition

Same as subject
Solved!
Go to Solution.

Hi RayBlack.
There is a driver available for the 32-bit version of Windows Vista, however, the L80 does not support printing on the 64-bit version of the Windows operating system. You can download the driver by clicking on the link below:
FAXPHONE L80 - Drivers and Software
Click the drop-down arrow for [Drivers] and then select the fax printer driver. Select "I Agree - Begin Download" to download the driver.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Someone please help me to find a USA to US power adaptor for the Zen Mic

Help ! I recently received a 40th birthday present zen micro from a relati've in New York, however the plug is the USA 'two flat pin type'. I have detached it from the power supply to find two smaller pins underneath so please someone tell me where I can buy the UK version of this 'plug top' from. Standard US to UK travel adaptors don't work as the collar diameter on them is too small meaning that the Zen's power supply won't fit ! I am desperate to try my new Zen out but I'm stuck ! Many thanks for any help.
Martin.

Thanks to everyone for the ti
ps.
I've gone for the cheapy uk shaver adaptor and it works fine. My zen didnt need any firmware updates but bizarrly the spare battery took nearly fi've hours to fully charge against the first which was just under three !
Lastly, does anyone know if the warranty is valid in the UK (ie Global) seeing as my zen came from the US.
Thanks again to all.
MD.

Is there a driver for the ZEN Mic

Similar Messages

Maybe you are looking for