Is there a dual sim Nokia on the market?

Hi,
I'm new here and I'm looking for a dual sim card telephone. I've been using Nokia phones for a very long time now (currently n70), but I need a dual sim phone and I can't find any from Nokia. Apart from the Chineese funny phones, the only things on the market that I know of in this segment are Samsung's D780, D880 and D980. Are there any prospects of Nokia releasing a similar device?

Nokia have no dual sim devices on the market and they have not announced any products with that feature.
So far dual sim phones have proved to be unpopular to the vast majority so I would be surprised in nokia released one in the near future.
Nokia won't comment on unreleased products so you will get no official answer from them.
Dual sim adaptors do still work on most nokia and other manufacturers phones. These only allow you to use one sim at once but you can easily switch between them.

Similar Messages

  • There is no Sim card in the iPhone you are trying to activate...

    I recently called AT&T to have a out of contract iPhone 3GS using the IMEI #. I followed the instructions to unlock the iPhone (backup and restore), and after restore it should then be factory unlocked. BUT that's not the case, I get a message saying, There is no sim card in the iPhone you are trying to activate, Please disconnect and insert a sim card. This happens with/without a sim card, AT&T or otherwise. I have done some research and basically came up with nothing except that the phone (running iOS 5.1.1) may now be unable to read sim cards, something about the IMEI #... I'm not real sure. Any help on this would be very apreciated. Is it fixable or am I doomed?

    Was the device previously hacked to be unlocked?  If it was, it may now be bricked.
    If no SIM card works in the device and it was not previously hacked to be unlocked, that would indicate the SIM reader has failed.

  • HT201628 im try ing to reinstall my iphone but it says there is no sim card in the phone when there is ??

    i am trying to install updated software on the phone but itunes keeps coming up with the message that there is no sim card in the phone even though i have not removed it can anyone help please ??

    The phone was jailbroken or illegally unlocked and when you upgraded the phone to the newest OS.

  • HT5163 i have an old i phone 3s and was using it as an ipod. at the last update i got got a message saying there is no sim card in the phone. i do not want it to be a phone anymore. however the device has a locked screen saying it has no SIM card. how do

    i have an old i phone 3s and was using it as an ipod. at the last update i got got a message saying there is no sim card in the phone. i do not want it to be a phone anymore. however the device has a locked screen saying it has no SIM card. how do i get back to unlocking the iphone and using it as an ipod again.
    thanks

    iPhones require a SIM card for activation, regardless of whether it is being used as an iPhone or an iPod.
    Put a SIM in the device for the carrier it is locked to and activate it.  The SIM can then be left it it or removed.

  • There is no sim card in the iPhone you are attempting to activate

    updated the phone today from 4.1 to 5.0, phone was jailbroke when i bought it, now when i plug in the phone  all that comes up is "There is no sim card in the iPhone you are attempting to activate"  i have tried all 4 mobile carriers in this country and still nothing.
    Any ideas?

    Thanks. I don't think this one was ever jailbroken, but I'll have to ask to be sure. Even so, a lot of people with 3gs's seem to have this same problem even if their phone was never jailbroken when they upgrade to 5.1.1.

  • There is no SIM card in the phone you are attempting to activate message??

    I got a replacemnt 4S from Apple and when I plug it into iTunes I keep getting There is no SIM card in the phone you are trying to activate message. Why is this happening? This didn't happen with my first phone that I got from Verizon.

    actually, there should be a sim card in the slot.  It will not have been activated, but it should be there.  just open it up and check.  also...be careful about where you are traveling internationally, especially if you are using data.  A few countries (not most, about 40...many in Asia and South America) use both CDMA and GSM.  on your 4s you do not have an option to choose what Network System you want to use (GSM, CDMA, AUTO etc).  On my recent trip to Venezuela, my 4s only grabbed CDMA which left me without email, web and texting...not good for a business trip.  After several hours on the phone with Verizon, I discovered that they are pushing an update to all Verizon 4s phones (not sure if it is ALL 4s phones or just those that have had their sims activated).  Was told the PRL version number for this is 52638 (a number which is outside the range of the November PRL listings).  what happened to me was either 1) my phone was never pushed this PRL (the push happens on Mondays and Tuesdays), or my phone may have been pushed the update but if *228 is pressed, that will overwrite the PRL so you are out of luck!  in any event, if you are traveling to one of these countries and you want data, be sure you not only activate your sim, but that you have the proper PRL in your phone.  Remember, until they come up with a permanent fix, don't do another *228 once you have this update!!

  • Dual sim nokia

    Friends and community nokia
    I have some questions?
    what is the meaning of automatic switching bands?
    when a phone have dual sim card and automatic switching bands can receive calls of the two operators?
    how is the nokia phone recomended  for you that have dual sim card?
    if i want  only one phone for two operator whith both caracteristics how is the best recommended phone?
    i do this question because in my country we have three operators of mobile 
    thanks  for your help 

    Dual band supports GSM and 3g frequencies. GSM has a broad coverage while 3g supports faster downloads (HSDPA) but is not available in all areas. This has nothing to do with dual SIM.  There are special dual SIM adapters for e.g. E71
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • WhatsApp for Dual SIM Nokia 206

    I am using a nokia 206 dual sim.i used whatsapp in phone earlier when i buy this phone.but now i cannot download whatsapp for this phone.what will i do to use whatsapp in this phone
    Moderator's note: We amended the subject so other users can easily identify and answer the concern.

    @Aravindkr007 does this help?

  • HT1766 my iphone doesn't open on the itunes and it shows me a message saying there is no sim card and there is a sim card in the device and it is a working one and can't open the device on the computer to restore it what can i do?

    my iphone doesn't open on the itunes and it shows me a message saying  there is no sm card disconnect and insert sim card and there is a working sim card inside the device and i can't restore the device as it doesn't open on the computer so what shall  i do?

    Remove and reinsert the SIM card.
    Replace the SIM card.

  • HT1424 Why does my new ipad ask for a SIM card when I try to start my vpn? There is no sim card in the machine but neither is there a sim card in my computer but vpn works fine?

    Model no MD369B/A

    Hi oluwaseyi,
    Thanks for visiting Apple Support Communities.
    If you're seeing the error "Invalid SIM" or "No SIM Card installed," be sure to try all of these steps.
    Update your iPhone to the latest version of iOS.
    Toggle Airplane mode On and Off.
    Try turning iPhone off and then on again.
    Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
    Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
    Restore the iPhone.
    If you still are unable to resolve this issue, contact Apple support for further assistance.
    You can find the article with these steps here:
    iPhone: Troubleshooting No SIM
    http://support.apple.com/kb/ts4148
    Best,
    Jeremy

  • Dual-sim nokia network signal receiver type

    Is it possible somehow to know what is the difference between receivers (hardware and signal level) in 101, 112, 206, 301 and more expensive models?
    Thank you!

    That depends on the supported signal of the phone and the signal that your provider has in the area. These are the two information that you need to look for.
    Most provider's website have a coverage map. You have to check which signal they have the strongest in the area then you need to check which phones support that signal.
    The Nokia 101 supports GSM 900 / 1800 only. You probably need a 3G handset.

  • Nokia Lumia 630 - Dual SIM / One SIM network diffe...

    I was just about to buy a Nokia Lumia 630 Dual SIM here in Thailand , my mobile SIM card only works of the 3G band - 850Hhz , I was told by the sales person that the Nokia Lumia 630 Dual SIM only has the 3g frequencys of 
     HSDPA 900 / 2100 
    but the One SIM version has the 3g frequencys  of   WCDMA/HSDPA Quad Band  850/900/1900/2100 MHz 
     I know that mobile phones can be different 3 g frequencies in different countries , but I wondered what you guys thought . 
    Solved!
    Go to Solution.

    I saw the details here
    http://www.siamphone.com/spec/en/nokia/lumia_630.htm
    and here ( in Thai , but easy to read )
    http://www.jaymart.co.th/ViewPro.asp?8328
    Attachments:
    6303G.jpg ‏162 KB
    JM3G.jpg ‏140 KB

  • HT201413 My iphone 3GS has a problem of reactivation after updates. Here is Itune error message,```There is no sim in the iphone you are trying to activate. I am using Orange Sim card. Please help.

    My Iphone 3GS has a reactivation problem after the updates. The Itune continues to read an error message like this,``There is no sim card in the Iphone you are trying to reactivate```The phone read no service. I am using Orange Sim card which has a subscribtion with Apples in my area. Please help

    Hey ugwujos,
    Thanks for the question. I understand that you are experiencing activation issues with your iPhone. When troubleshooting activation issues, the following article provides some great steps:
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/TS3424
    Thanks,
    Matt M.

  • Dual Sim for the NEXT Iphone Please

    Hello, Everyone
    This is a suggestion for the next iPhone. Please make DUAL Sim built into the phone. I know in America its not all that but in Europe multiple SIMs is very common and popular. You can distinguish work and personal with one phone.

    http://www.apple.com/feedback/iphone.html

  • IPhone 4S iOS 5.0.1 Dual Sim failure

    Hello,
    First of all I want to clarify what I mean by Dual Sim. I am using the iPhone with this SIM from the first 2G model, and it was working perfectly.
    It is one sim with two phone numbers (one forwards the calls to the other). This options is offered by the Romanian carrier Vodafone for business clients.
    I am not talking about two phisical sim cards.
    Starting yesterday evening after upgrading to iOS 5.0.1 on my iPhone 4S (bought in Germany) I can't really use the phone anymore, I hardly have any signal and nobody can call me on both numbers.
    I changed the sim with a new one from Vodafone but had no luck.
    The sim is working anyway perfectly on other iPhone models (3g, 3gs, 4) with a lower iOS version than 5.0.1.
    I really hope Apple will issue an update as soon as possible because right now I have to go back to an older model in order to use my phone.
    Any help and/or feedback would be appreciated.
    Thank you,
    Sebastian

    Hi Sebastian,
    I do have a similar problem. I also use a dual sim that works on iPhone4 and iPhone 3GS perfectly. I obtain the dual SIM service from the Spanish carrier Movistar.
    If I go to Settings > General > Phone > SIM Applications > Dual, I am able to see wich line is active, but I can not change from one to another. If I try to change the line, the phone loses its network service and I have to switch it off and on again to recover the network service and being able to talk, text and navigate.
    With 3GS and 4 I could perfectly change from one number to the other one (Before I had a Nokia N97 and it also worked perfectly). With my brand new 4S (iOS 5.0) I do have to switch the phone off and on again in order to change to the line I want to use.
    Movistar Spain has recognized there is an issue with iPhone 4S and dual microsim cards. They say  they are waiting for Apple to approve some kind of new version (I guess they talk about a new iOS version but I'm not sure).
    I know there is more people at Spain using this service with Movistar and they are becoming really angry (using 4S with iOS 5.0 and 5.0.1), because this issue was reported more than a month ago. It's really frustrating having paid for such an expensive phone and suffering this kind of problems...
    I hope Apple will give us a solution really soon.
    Regards.

Maybe you are looking for

  • Display text area for printing

    Hi, I know here are many threads about displaying a textarea as read-only. but no solution fits my requirements. I have a page with many fields among other things 3 textareas. This textareas a normally display as autoheight. for printing this page I

  • Cs5.5 how to put on laptop with no cd drive

    I have CS5.5 creative suite on my laptop at the moment. I want to deactivate it and move it to my new laptop however theres no cd drive! How do I do this as I am not paying for a new package!?

  • SQL query performance issues.

    Hi All, I worked on the query a month ago and the fix worked for me in test intance but failed in production. Following is the URL for the previous thread. SQL query performance issues. Following is the tkprof file. CURSOR_ID:76  LENGTH:2383  ADDRESS

  • Select Option on Selection Screen with custom description

    Hi experts, I have used select options and some parameters on selection screen. But is displaying the only the field names i want to display the description instead of field name. Here is the screen Like instead S_ANSDT is Acquisition Value and inste

  • Proxy via AAE

    Hi Experts, Any pointers on prerequisites checks to be done for configuring receiver proxy SOAP 3.0 in integrated configuration for message flow through AAE? I have a scenario for direct message send to ECC from JMS queue. I thought to use IC in AAE