Is there a FCP function simular to adjustment layers in PS?
I was wondering if there was a function in Final Cut where a filter or level/color adjustment could be added to an entire squence at once, rather than just cut by cut. (Simular to adding an adjustment layer in photoshop) Currently I am either sludging through copying filters or effects to every cut in the given squence, or outputting the whole thing, applying the filter to the output movie, then outputing it again. I'm sure they have come up with a better way, I just don't know what they is.
Thanks for the help.
.ryan.
'on and on and on'
In addition to the method Zeb suggested, you can also apply the filter(s) to one clip, then right-click on it and choose "Copy." Next, select (highlight) the other clips that you want to have the same effect, right-click on one of them and choose "Paste Attributes."
A window will open letting you pick and choose which attributes you want to apply; filters is one of the choices.
-DH
Similar Messages
-
Adjustment layers not editable?
I have just upgraded to CS4 and am trying to add an adjustment layer, but when I click on the icon at the bottom of the palette and select Hue / Saturation I don't get the actual adjustment any more.
All I get is the adjustment layer showing in the layers palette.
I can click on Edit Adjustment... BUT NOTHING HAPPENS. I don't get the adjustment dialogue.
I have tried adding an Adjustment Layer from the Layers menu, but I still miss out the dialog stage and end up with the adjustment in the layers palette but again no way to edit it.
Is there a new way to add adjustment layers?
Is there a new hidden preference somewhere?
I am using a Mac with OS 10.5.7 and a 2 x 2.8 Ghs Quad-Core Intel Xeon MacPro.
Any ideas?
CWelcome to CS4. Check out the adjustments panel here: http://help.adobe.com/en_US/Photoshop/11.0/WS3B030337-01D1-45b4-A006-E3ECA67B14B9.html
There are some tricks to returning to CS3 behavior. I just use CS3 when I get fed up with the non-modal (or something) brilliance. -
AutoSelect Without Adjustment Layers
Hello,
I am using the Move Tool with Autoselect enabled, meaning that when this tool is active, I just left click anywhere in the document and it will automatically select the layer that the left click occurred ontop of. It will always select the top-most layer.
The problem is, my very top layer is an adjustment layer. So this tool is now rendered useless, because it's always selecting the Adjustment layer because it's always the top-most layer. I can't get it to select any layers beneath the adjustment layer.
is there a way around this, to maybe have the Move Tool (AutoSelect enabled) to ignore adjustment layers in this instance?thanks guys - sorry for the delayed reply but I was having a hard time trying to find my way around the new forums
ctrl-clicking is okay, but I work with a large amount of layers that I bounce back and forth between, so prefer to find a way to directly switch to another layer without having to search through the pop-up layers menu - it becomes very tedious when the menu pops up with a selection of 20 layers and then I need to search through that list. At least with the auto-select tool I could jump right to another layer by left clicking and then deal with it from there.
If that's not an option, is there a way to hide all adjustment layers (toggle on/off maybe) with a keyboard shortcut or script? I've researched the forums but haven't found anything yet.. if there is a way to do that, then I might be able to get around this issue.. -
Running CS3 on Win XP suddenly lost Exposure function in Image adjust. Ant ideas?
Have CS3 in Win XP been fine for about a year but now dont get the exposure function in Image>adjust it was there 2 days ago and no crashes have occurred. Any ideas how to restore?
Hi Bob,
First time user SORRY question is now fixwd by myself but couldn't find how
to erase question in forum
Regards,
Jim Christie -
Is there motion search function?
Is there motion search function? I am making a video from speed-painting, so i want to delete all parts where you can see hands, so only the drawing progress will be left. Is it possible to optimize this?
is not too terrible.. if you used motion ( scale position ) controls you can sorta scrub through clips fast and see when those 'effects' are showing up..and either look at the effect panel or the actual images ( program monitor ? )... and do what you want... adjust, delete keyframes etc. ??? is not that terrible...
you'll do a great job .. dont worry... -
Some missing FCP functions?
I have just switched from FCP to Premiere Pro, and there are some functions, that I'm used to in FCP, that I can't seem to find in PP. 1. Mouse scrolling in the timeline, up/down makes the timeline scroll right/left, when I want it to show hidden tracks (up/down) 2. I would like to be able to set the timelone up, so all clips are unlinked when it is dropped onto it. Not having to "right-click" and "unlink" each clip. 3. Adding transitions to a selection of clips would also be great. And not having to place the CTI over the edit to add the transition. Everything else seems to run as I'm used to, when I have setup my keyboard shortcuts. Anyone have ideas howto get PP to do the things I'm missing. Thomas (o:
1. Mouse scrolling in the timeline, up/down makes the timeline scroll right/left, when I want it to show hidden tracks (up/down)
Nada. Lots of people want this (not me), but you can file a feature request here: Adobe Feature Request/Bug Report Form
2. I would like to be able to set the timelone up, so all clips are unlinked when it is dropped onto it. Not having to "right-click" and "unlink" each clip.
I don't believe there is a way to do this at the application level--if there is, I'm not aware of it--but if you drop all your clips into a sequence, you can select them all and unlink in one fell swoop. Not exactly the same, so if you want the same, do the Feature Request Thang
3. Adding transitions to a selection of clips would also be great.
Can be done; just select all clips you want transitions between, and go to Sequence > Apply Default Transitions to Selection. If you select just video (hold down Alt or I think Opt on a Mac) or just audio, you'll add transitions to just those, but by default, it adds both audio and video. Note that this requires setting up a default transition (right-click on one in the Effects Panel), and probably your desired duration in the program settings.
And not having to place the CTI over the edit to add the transition.
Not sure I'm following you. You don't have to have the CTI... I mean, playhead (they changed the name in CS5.5... grr) over a transition to edit it. Just select it and you can tweak it in the Effects Controls panel.
Welcome aboard, by the way... -
in the program pages there is a function that automatically will save may document not only one i click save
In Lion and Mountain Lion you must save the first time then it will autosave for you with versions.
ForEverSave, a 3rd party application, might actually prompt you after a set period. Check it out and any alternatives.
Peter -
Okay: My start page is the one Google provides: http://www.google.ca/firefox?client=firefox-a&rls=org.mozilla:en-US:official and frequently it has a note underneath the search box that "You're not on the latest version of Firefox. Upgrade today to get the best of the Web!" But when I check for updates on the About Firefox window, it says my Firefox is up to date. So what is the start page looking for? Is there some setting I need to adjust? Or is this a Google marketing ploy to get me to switch to Chrome?
I tentatively think I have the solution; this is for when the session id value 'thing', in about:config, referred to in other answers is already on the default/rest state.
I am assuming, I don't what to imply certainty in-case there is a value wrong in our browsers, that the problem stems from the fact that our homepage is no longer the default for Firefox.
So, go to 'Options'>'General' and delete the homepage. This will reset it to the new address, which is 'about:home'.
I hope this helps some people. -
Is there any inbuilt function to split a comma seperated text
Dear Friends,
Is there any inbuilt function to split a comma seperated text for inserting the values thus split in to a table.
Text Ex: Mango, Orange, Pinapple, Jack Fruit
Output: Mango
Orange
Pineapple
Jack Fruit
Thanking you,
With regards,
FranklinUsing DBMS_UTILITY.COMMA_TO_TABLE:--
DECLARE
l_tab dbms_utility.uncl_array;
l_tablen number;
BEGIN
dbms_utility.comma_to_table('A,B,C', l_tablen, l_tab);
dbms_output.put_line('TABLE LENGTH : '|| l_tablen);
dbms_output.put_line('TABLE COUNT : '|| l_tab.COUNT);
for i in 1..l_tablen
loop
dbms_output.put_line(l_tab(i));
end loop;
END;
source --google. -
Are there different php functions for Oracle 8 and 9?
Hi!
Are there different php functions for Oracle 8 and 9?
Thanks for your answer!You can use the oci8* functions for Oracle 8, 9 and 10.
It is the most recent PHP interface to Oracle, and uses Oracle's most recent
API.
The name oci8 comes from the version number of Oracle - version 8 - when
Oracle introduced a new C API. It succeeded the original OCI and got the
common name OCI8. The original OCI now has the common name of OCI7.
-- CJ -
Is there any recursive function in DB2
Hi all,
Could you please tell me is there any recursive function in DB2 and if yes then please provide me a sample code.
I want to write a function as below but it's giving me following error:
>[Error] Script lines: 1-33 -
( DB2 SQL error: SQLCODE: -440, SQLSTATE: 42884, SQLERRMC: SCF_MC2;FUNCTION
Message: No authorized routine named "SCF_MC2" of type "FUNCTION" having compatible arguments was found.
Line: 11 )
create FUNCTION scf_mc2 (@@certname varCHAR(20),@@assignee varCHAR(20),@@currentUser varCHAR(20), @@javaLocale
varCHAR(20) )RETURNS float
LANGUAGE SQL
READS SQL
DATA format:
BEGIN ATOMIC
declare @n_cost float;
declare @n_cost1 float;
set @n_cost1 =0.00;
FOR @n_cost as
select
COALESCE ((CASE substr(ep.part_id,1,5) when 'cours' then tp2.scf_nc(ep.part_id,@@assignee,@@currentUser,@@javaLocale) else
tp2.scf_mc2(ep.part_id,@@assignee,@@currentUser,@@javaLocale) end ),0) cost
from
tpt_ext_ce_certification certi
inner join tpt_ext_ce_track tr on tr.certification_id = certi.id
inner join tpt_ext_ce_group gr ON gr.track_id = tr.id
inner join tpt_ce_education_plan ep ON ep.owner_id = gr.id
WHERE
tr.locale_id = @@javaLocale
AND
gr.locale_id = @@javaLocale
AND
certi.locale_id = @@javaLocale
and
substr(tr.flags,2,1) = '1'
and
certi.id=@@certname
DO
SET @n_cost1 = @n_cost+@n_cost1;
END FOR;
return @n_cost1;
end format
Regards
VishalJava is an object-oriented language, so you're not just searching for a method to do what you want, but for a Class, that provides that ability.
And since you don't define what "the date that I want" means I can only guess.
If you've got the date value in a String in some format, then you might look into the DateFormat or SimpleDateFormat classes. -
Is there a similar function in Edge Animate that is similar to the draw path function in After Effects?
No, I'm afraid not. However, you can drop a clip from in to out into the timeline and the hit CMD+R and grab the end, changing the length of the clip to fit in the space that you need by speeding up the clip.
Hope that helps.
Andy -
Is there a custom function available which can be used for logging errors captured in a sp during and after execution in a sql table?
Basically we would like to utilize such function in every sp and log errors of each sp in a error log table
MudassarThanks .
I was able to write this however I am thinking I am missing something
CREATE FUNCTION testfunction1()
RETURNS @temp_error TABLE (
id int identity(1,1),
procedure_name varchar(255),
line_number int,
error_number int,
error_message varchar(max),
error_state int,
error_severity int,
occurence_datetime datetime default current_timestamp,
user_name sysname default suser_name(),
login_name sysname default suser_name()
AS
BEGIN
insert @temp_error(procedure_name,line_number,error_number,error_message,error_state,error_severity)
select error_procedure(),error_line(),error_number(),error_message(),error_state(),error_severity()
RETURN;
END;
CREATE TYPE test_type AS TABLE(
id int identity(1,1),
procedure_name varchar(255),
line_number int,
error_number int,
error_message varchar(max),
error_state int,
error_severity int,
occurence_datetime datetime default current_timestamp,
user_name sysname default suser_name(),
login_name sysname default suser_name()
GO
create proc usp_error_test
@test_type AS test_type READONLY
as
begin
begin try
select 1/0
end try
begin catch
select * from testfunction1(@test_type)
end catch
end
Mudassar -
Is there any RFC function module to read domain fixed value
Hi,
Is there any RFC function module to read domain fixed value from remote system in basis layer?
As we cannot simply wrap DD_DOMVALUES_GET with a new RFC module,because remote system will not install our component, our wrap function module is not there.
We may need a RFC fm from basis layer.HI,
Try using Function Module:
DD_DOMA_GET , If it is RFC enabled it can be used for reading the domain,
Kindlly go through this link below:
How to get "Fixed Domain Values" from other system by RFC-Call?
Hope it helps,
Regards
Mansi -
There are no functions containing returntype = 'query' and access!
Hi there
I am trying to add a recordset after defining a datasource and I keep getting the error when I do a CFC query search
there are no functions containing returntype = 'query' and access!. I have attached an image to show the error messag I get.
Can someone help me fix this? my datasource shows up as correctly configured in cold fusion and the mysql database is well configured as well.okay, adding another function to the CFC and saving it makes
it suddenly, magically visible to the function invocation window?
I don't understand.
Maybe you are looking for
-
i am not able to synchronize/add video songs in itouch ipod
-
I need new pc. is it possible to instal Photoshop CC again ? How often can I install?
-
Why won't this slide show run it compiles
import java.awt.*; import java.applet.*; import java.net.*; public class SlideShow extends Applet { private Image[] images; private String[] text; private Label captions; private volatile int curFrame; private Thread timerThread; private
-
Modify customer hierarchy in scheduling agreement
Hello everybody, if I modify the customer hierarchy how can I update it in the scheduling agreement? Is there a way to update it or I have to delete and create the order after the modification? Thank you all Francesca
-
Would I be able to load Arch from wubi based grub [solved]
Hello, This one of my experience where I am trying to see if I can load Arch (installed on partition not like lookback disk) from grub that is installed on wubi installed ubuntu file. So far, I could install Arch on disk without installing grub and a