Is there a Fieldpoint Find Devices Vi that I can use programatically?

Hello All,
I'm trying to build a program using Fieldpoint I/O that will run in my PC and will work with several different Fieldpoint configurations.
Is there a Fieldpoint Find Devices Vi that I can use programatically? (Like the one built into MAX)
It would allow me to only configure tags for only what is actually connected.
Using LV7.0 @ Win2K.
Thanks,
Mike

Michael,
I found a vi (in LV) called "Get FP Channel Info.vi".
When I enter the IP and module addresses, it returns the Module Name and something called an "MIS String".
I'm guessing I can use that data to decode the module...can you help with that?
Also, when I try to open the Block Diagram it tells me it's password protected. So I can't see exactly what it's doing.
Can you provide the password?
Also, since I have two TB-10's in my system, I'll need to know how to decode all of the I/O modules that are available for those.
Thanks,
Mike

Similar Messages

ThinkPad X230 - Test Instrument: "This device cannot find free resources that it can use (Code12)"

I am use an ExpressCard (http://www.home.agilent.com/en/pd-2053520-pn-M9045B/pcie-expresscard-adapter) to connect Lenovo notebook with instrument chassis (http://www.home.agilent.com/en/pd-1886666-pn-M9018A/18-slot-pxie-chassis).
I found that Lenovo notebook failed to enumerate with the instruments with error "This device cannot find free resources that it can use (Code12)" in device manager.
This never happened in Lenovo model ThinkPad X220 and models before that.
Other affected model: ThinkPad T430, T540p which all failed to enumerate.
Note: All notebooks are upgraded to latest BIOS.

You are going to need to move that card to another slot. That is definitely your problem. I had mine in the PCI-E X8 slot which then knocked my video card down to x8 as well. So this definitely takes up resources. Also you can use something like EVEREST of Sisoft Sandra and those will tell you what else is sharing with that card. You could have a difficult network card that is fighting with it as well. You may think that its onboard and that of course it would not fight, but it does.

Is there a format for a file that I can use for attaching a one page document with photos embedded that will open in everyone's email automatically? I've tried PDF and Word, but worked only in Mail. Lost formatting when just copied and pasted in email.

Is there a format for a file that I can use for attaching a one page document with photos embedded that will open in everyone's email automatically? I've tried PDF and Word, but PDF worked only in Mail. Word worked in nothing. I also tried copying and pasting the document but lost all formatting when just copied and pasted in email. Is there a way to do this?

Are you sure PDF won't work? It should as what you're trying to do is pretty much what it is designed for (PDF - Portable Document Format). On a Mac anywone who receives the file should be able to see it in all its page layout glory by using the app Preview or Adobe Reader. Same on a PC, the file should be viewable as a PDF file using Adobe Reader and probably some other viewer (don't use PCs so not sure what other apps).
What application are you creating the file in and are you sure you're exporting it correctly in PDF format, fonts and images embedded?

Office 2013 - Is there a way to when installing that you can change the default save location without having to configure it within the client?

So, What I am trying to do is deploy Office 2013 throughout our company, and I do not want the users to save their business or personal files created within Office 2013 on the C: drive or Sky Drive. We have what is called the U: drive and I'd like to know
if there's a quick registry tweak that I can use to not only change the default location upon setting up a computer, but to deploy through Group Policy?
One other question perhaps; Is there a way to change not only the file location to default to only the one place, but also is there a way to also set a specific size limit to folders and prevent certain files from being saved (videos and personal pictures).
I have our network pretty tight as to what or who can go where, and what not, I am just really for an answer or some help to the default location...anything you have GREATLY APPRECIATED!

You can use the OCT and/or domain Group Policy, to customise the Office experience and settings for your users:
https://technet.microsoft.com/en-us/library/ee460874.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Hello, i lost my iphone5 32gb and i want to track it but the thing is that in my iphone5 i did not setup the find my iphone application :'( ...so, is there any option where i can track my phone or block it that nobody can use it..please help me out

Hello, i lost my iphone5 32gb and i want to track it but the thing is that in my iphone5 i did not setup the find my iphone application :'( ...so, is there any option where i can track my phone or block it that nobody can use it..please help me out

Unfortunately if you did not set up 'Find My iPhone', there is no way to remotely track or wipe the device.

This device cannot find enough free resources that it can use. (Code 12)

Got the above error when i insert a firewire card with via chipset. I have update the firewire driver by picking a list of device driver from my computer and though it prompt me to restart but yet it still shows the yellow exclamation mark and next i update it through online, same thing it prompt me to restart which i did but sad to say it shows the yellow exclamation again
When i check under properties>general tab, it says the following Quote
This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system.
You need to restart your computer before the changes you made to this device will take effect.
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
As far as i know the irq in bios setup is all set as auto and the total there's 4 pci slot and only 1 that is using, so how can it be resources being used up??
Fyi i'm using Msi P35 neo3 mobo with vista ultimate sp1

Under device manager> VIA OCHI Compliant IEEE 1394 host controller> right click it and choose update driver follow by choosing the option of search automatically for updated software (window would search your computer and the internet for the lastest driver software for your device)
Once done i reboot and next bingo.... the yellow exclamation was no longer there, infact it was quite wierd when i try updating online, as the very first time it doesn't work but wouldn't know why the second time it does

I, work on dell laptop latitudes version 7, win 7 64 bit, ssd disk, 16 gb ram. i receive the error 12 This device cannot find enough free resources that it can use. please help

I, work on dell laptop latitudes version 7, win 7 64 bit, ssd disk, 16 gb ram.
i receive the error 12 This device cannot find enough free resources that it can use. please help

1. You have placed problem in wrong forum, or use different Windows operating system
2. Double check your resources, namely in Disk manager. What is free space on HDD?
Regards
Milos

I've just migrated my Logic Pro 9.1.8 to a new Mac because my old computer crashed. They are asking for a serial number, but I don't have the install disks anymore. Is there someplace in the software itself that I can find the serial number?

I've just migrated my Logic Pro 9.1.8 to a new Mac because my old computer crashed. They are asking for a serial number, but I don't have the install disks anymore. Is there someplace in the software itself that I can find the serial number?

Please stop making multiple posts on the same subject.. This is the third thread you have created in a short space of time asking the same question.
Please read the answers given in this thread you posted...
https://discussions.apple.com/thread/5311324?tstart=0

Is there any talk about adding a device to the ipad so that you can use it as camera like ipad2

Is there any talk about adding a device to the ipad so that you can use it as camera like ipad2

James-
As Jeanne mentioned, it can work as long as the added device is a camera, and you have the iPad Camera Connection Kit. The kit contains two adapters, one for an SD camera card and one that accepts a USB card adapter or cable from your camera.
With regard to your basic question, Deggie is correct. It does NOT work like a built-in camera, so you can't use it for video calls. You have to take pictures with the external camera and transfer them to the iPad.
Fred

TS3212 i have a new pc with windows 8, i've downloaded itunes but there is no evidence of it that i can find but when i go to redownload it comes up with 'thanks for downloading itunes'... any help would be appreciated

i have a new pc with windows 8, i've downloaded itunes but there is no evidence of it that i can find but when i go to redownload it comes up with 'thanks for downloading itunes'... any help would be appreciated

See the futher information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
See this migrate iTunes library post for advice on moving the library over from a previous computer and this post on deduplication.
tt2

HT1349 i just lost my iphone 3gs a week ago. unfortunately i was not able to download any iphone finder. is there any other options that i can use just to find my iphone?

i just lost my iphone 3gs a week ago. unfortunately i was not able to download any iphone finder. is there any other options that i can use just to find my iphone?

I think you're stuck if you don't have Find My iPhone enabled.
--BugBytes
<Post edited by Host>

I used my iPhone maps it works very well. Is there an application for the iPad that could be used on a boat?

I used my iPhone maps it works very well. Is there an application for the iPad that could be used on a boat?

Indeed :-)
This forum is riddled with questions by users that cannot get their computer to do what they want, *despite* the fact they use a very precise and (usually) unambiguous method of telling it want they want it to do -- a programming language. Making it comprehend *natural* language is, by any way of measuring, a number of degrees more difficult.
That said: in what way would a computer program (advanced or "dumb") be able to help the OP? Spell check is one -- but it's not a *fact* that anything written *badly* equals nonsense. In politics, for example, the most eloquent speakers still manage to make a fool of themselves :D The same goes for "grammar". Of course, bad grammar is more difficult to understand -- EVEN for a human. So a computer is bound to fail on that as well.
Fact checking then? I usually can't even find what I want in one go with Almighty Google (which seems to turn things around: if it cannot find "enough" web pages with the exact phrase you asked it, it automatically assumes you are interested in synonyms, antonyms, homonyms, and other *unrelated* stuff! Yeah THANK you but I want to find what I typed in!)
A good starting point would be to define in more detail what this hypothetical software *ought* to do -- that needs to be a bit more concrete than "I want it to do my job for me."

I bought an iphone 4 used. I installed ios7 before I realized that the previous owners e mail and password are still in the phone. How can I remove this so that I can use the cloud and "find my phone " features?l an

I bought a used iphone. I installed ios 7 before I realized that the previous owner's email and password are still in the phone. How can I remove them so that I can use the icloud and "find my phone" feature?

Thanks so much! It will be kinda weird to contact the person directly, but I guess I will give it a try. Is there anything that I can refer her to in this discussion to let her know I am legit, and not a creeper? Also, I don't know if you can answer this or not. When I plug my phone into itunes, and it says that it is backing up, does that mean that it is going into the other person's cloud, since I cannot access it?

I find it annoying that you can't use aliases in where statements

I find it annoying that you can't use aliases in where
statements
for example:
SELECT TOP 1
CAST(amount
/ ( CASE WHEN ISNULL(rate, 0) <> 0 THEN rate
ELSE 1
END ) AS NUMERIC(10, 2)) AS num
FROM table
WHERE num > 1
ORDER BY num
Are there any workarounds?

> I find it annoying that you can't use aliases in where
statements
This isn't really (or... "at all") a CF question. You're
better off asking
this sort of thing on a SQL Server forum.
You could use a derived table, I guess:
select top 1 num
from (
SELECT
CAST(amount
/ ( CASE WHEN ISNULL(rate, 0) <> 0 THEN
rate
ELSE 1
END ) AS NUMERIC(10, 2)) AS num
FROM table
where num > 1
order by num
(that might not preserve the intent of you SQL (sorry: it's
late, I'm
tired), but you get the idea.
Adam

How to select my custom monitor calibration profile into Lightroom 5.7? I used i1 Display Pro to calibrate my monitor, I could not find or confirm that Lightroom is using my custom monitor calibration profile? Thank you very much.

How to select my custom monitor calibration profile into Lightroom 5.7? I used i1 Display Pro to calibrate my monitor, I could not find or confirm that Lightroom is using my custom monitor calibration profile? Thank you very much.

The monitor profile is set at system level. Lightroom will find it there and use it. You're not supposed to do anything, i1 Profiler will do it all for you.
Go here to confirm that the right profile is set as system default (Windows):

Is there a Fieldpoint Find Devices Vi that I can use programatically?

Similar Messages

Maybe you are looking for