Is there a "fine" move key combination for precision placement?

As I'm trying to arrange objects in the document, when I press the up/down keys to move them precisely, they move at an arbitrary large step.
Now, if I press the shift key while I move them, that step is further increased (like the previous was too small...).
So, is there any other key combination that reduces that step and makes it finer for a more precise placement as in other applications?

I do not know. I am also missing this option.
Adobe Help:
http://help.adobe.com/en_US/illustrator/cs/using/WS714a382cdf7d304e7e07d0100196cbc5f-6426a .html#WS714a382cdf7d304e7e07d0100196cbc5f-6421a
You can also use the grid lines:
http://help.adobe.com/en_US/illustrator/cs/using/WS714a382cdf7d304e7e07d0100196cbc5f-631da .html#WS714a382cdf7d304e7e07d0100196cbc5f-631aa
Config grid:
cmd + K > Guides & Grids
and:
show grid: CMD + '
Snap to grid: shitf + cmd + '
P.S.
Besides Illustrator 17.1 seems to have a problem with a precise setting and attracting obiektwó to mesh.
I can not set the center prostąkata x: 0 y: 0 px. ?!

Similar Messages

"Country/Region/Plnt Region" key combination for JVRD

Dear Guru
We are using this key combination for JVRD. When I check the condition analysis for my PO, the record shows that
Country = IN
Region = !
Plnt Region = !.
I checked my vendor master address and the plant already updated with Region in the address.
Where else do I need to checked?
Thanks in advance.

Hi,
Please check in FV12 how these values showing...
if they are fine...check in the table t001w...
Hope it helps
Kuber

How to add a feild as key combination for existing condition table

Hi all,
please any body can inform me about how to add a feild as key combination for existing condition table ex 901 having the key combination of sales organisation and material
for this cond. table,how to add a new feild ex:price list
iam unable to add it in change mode of v/03.(even after removing this 901 table from Acc.seq.)
Edited by: rajendraprasad vasam on Apr 25, 2008 10:08 AM

mr.Rajendra
I you have the access key - you can copy the 901 table and create a new table along with your required field. v/03
Or
in the access sequence for the condition type - add 1 more step and add your field.
ie 10 - 901
and in 20 - your required field
regards,
Reshmi
Edited by: reshmi bhaskar on Apr 25, 2008 10:21 AM

Key combination for tax condition record

Dear Experts,
I want to create new key combination for creating a condition record for a particular condition type for tax code using T CODE FV11,
please tell me what is T CODE TO Create key combination ,
Thanks in advance

1.Create Table in V/03
2.Assign to access sequence in OBQ2

Repricing of Custom Field used in Key combination for Pricing

Hi,
we have created a custom field and this field is being used in the Key combination for Pricing. For standard fields we all know that the pricing condition is repriced once the value of the key field is changed in the document automatically (not manual update)
The problem with this having the custom field in the Key combination is that when this fiel value is changed in the document the condition is not repriced automatically. We need to Do the price update manually for determining the new condition value.
Request you to help in solving the issue. Do explain the things to be carried out for automatic pricing for the Custom fields added.
Thank you in advancd.
Regard
Kula

Hi Kulasekar,
I think you have to implement Badi CRM_COND_COM_BADI, update communication structure with updated value from transaction should do reprice.
Hope this helps!!!

Key combination for condition record

Hi,
I am trying to create condition record for tax code using tcode FV11.
I have enter condition type as JMOP.
but in key combination it is not showing Tax classification
how can I add this key combination.
Please help.
Regards,
vijay

Hi,
The Access sequence JTax should be the access sequence of the Tax condition types .
Financial accounting > Tax on Sales/ Purchases> Basic settings
Then using the FV11 for the Tax condition types, the access sequence " Tax classification " can be used.
Thanks & Regards,
Amjad

New key combination for access sequence

hi,
i have an active access sequence called ZBMP. There is 2 key combinations to the access sequence
5 materail / plant
10 material
I need to add a new key combination
15 - material / Pant / Distribution Channel
to the access sequence.
Can someone please help.
Regards

Hi,
Step 1: Go to V/03 and create a table with key fields(material / Pant / Distribution Channel) or Use the existing standard table.
Note the created table number.
Step 2: Go to V/07 and select your previous Access Sequence and Double click on the Access field under Dialogue structure. click new entries and specify the new table number with step number (Created in step:1).
Step 3: Now select the Line item and double click on Fields. Ignore the warning by pressing Enter Key.
Now do save.
Step 4: Check your Access sequence. New table would be added.
Hope it helps.
Regards,
A.Govin

Is there a nudge or move key? for sound clips?

I am trying to sink (right spelling?)screams to a video... Exactly in place. I am using the multitrack viewer and zooming in, but cant seem to nudge the sound clips that tiny bit, .. is there a nudge key?

hey there anita,
you can use the arrow keys or magnify/zoom the timeline(i think in the lower left corner) to make it easier to slide clips around to where you want them.
good luck.

Key combination for TAXINN

Hi,
Please tell me which combination is best suitable for configuring TAXINN procedure?
if we have several vendors and many materials,then which key should be used?

go for country and tax code combination it will solve your purpose.
You will not have to mantain condition record in Fv11 for each vendor material planmt combination.
You can directly assign for your tax code and country it will be common for whole company code.
just make sure you have defined tax condition type with acess sequence JTAX.
Reward if usefull
Regards
sujoy

Is there an instant movie theme suitable for Real Estate videos with Premiere Plus?

Most of the themes are very flashy/snappy/loud. Before I pay $50. I would like to know that there is a theme suitable for a short real estate video of a neighborhood and walkthrough of a home. Thanks!

Welcome to the forum.
I hesitated to reply, as I have only used Themes once, and then totally reconstructed the Effects. I also do not have PrE 10, so you probably have more Themes, but I am not sure that any is really suitable for your described Project. I was hoping that Steve, Neale, John T., or others, who might have more familiarity with Themes, would show up, but they have not - yet.
Looking through the Themes that I have, and even putting on my creative hat, to image how one might work as a base, and then be heavily modified for your Project, I am coming up almost at a total loss. The closest that I could come would be the Travel Theme, where the Locations (in the Theme) are changed to the houses in a neighborhood. Yes, that IS a stretch, but the best that I can come up with.
I agree with you that the Themes, in their stock form, are flashy, loud and most suited for a short treatment, that would be shown to young children, sort of like many things at a Disney themepark - bright lights that flash, loud SFX and music, bright colors, etc..Hardly suitable for a commercial, professional Video.
Now, when you write:
Before I pay $50. I would like to know that there is a theme suitable...
Are you contemplating buying a "Theme Pack," (have not seen such) or similar, or do you mean, before you buy PrE?
If the former, can you point to the source of that Theme Pack, and I will look over the details. If you mean the latter, PrE is in no way restricted to those Themes. I have used PrE for many years, and have used but one Theme (heavily modified), in all that time. I have created many commercial, business Videos, so the program has all the power that you need - just not with their Themes.
If you are contemplating the purchase of PrE, can you outline the material that you will be working with, a few of your ideas on the aesthetics, that you would like to incorporate, any technical thoughts, and give us an idea of how you will want to deliver the Video. We can help you make that decision, as to whether PrE is the right tool.
While I have not seen any of the newer versions, AVID/Pinnacle's Studio program (probably up to ~ 15 now) has, or had, similar with their Instant Movie. However, back to about Studio 10, those were in the same vein, as PrE's Themes (nearly useless, and often rather odd, though usually funny, and maybe not in the way intended?). Back through about 10, I cannot imagine one of those being useful for your purpose, but might have missed one, and Pinnacle might have finally added some that ARE useful.
Good luck, and please let us know a bit more.
Hunt

Startup key combinations for G5 PowerMac

I have a graphics card problem with my G5 PowerMac. It no longer powers up my monitor. I need to erase my hd & reinstall but...
The support people told me that if I connected the G5 to my iMac with a firewire cable I could get to my G5 hard drive. I thot they told me to hold down the "t" key while I turned the power on the G5 with the iMac already on. Its not working.
Anyone have a clue

Hello! You'll find the information for FTDM HERE.TOM

MWST Key Combination

Hi,
There are 3 available key combinations for MWST condition type, I just want to know the difference of key combinations 'Departure Country / Destination Country' and 'Export Taxes'. What are their differences and usage.
Thanks.

Dear Yeng,
'Departure Country / Destination Country' and 'Export Taxes'.
'Departure Country From which country the goods are getting deliver i.e shipping poing country.
Destination Country' To which country the good need to deliver i.e Country of the ship to party.
Export taxes This may be indicates different taxes in the export sales.
Use Through above combination you can able to maintain the Tax condition record diferently based on the different combination data.
Based on the condition record system will consider the taxes automatically based on the combination while creating sales order.
I hope this will help you,
Regards,
Murali.

Key combination creation for FV11 conditions

Hi Experts
How do we create the key combinations for FV11 conditions. Can I create a key combination Plant/Vendor/Materialcode.
Regards

hi
for this you need to create condition table of ur own or if look for existing table having the required key combination field
then you need to maintain that condition table for ur pricing procedure
u can do this at
spro> MM> purchasing->condition->define price detremination process--> maintain condition table
there you need to enter the created condition table no.
then in fv11 you can see that key combination
hopes this will solve ur problem
reward points if helpful
regards
chetan

Problem in Inv O/P Condn Rec--"Debit/Credit Key Combination not appearing"

Hi,
I have done the following settings for Inventory Mgmt:Output determination:
Print control settings as follows:
1. Defined Print items for each output type (eg. A,B,C etc.)
2. Defined Version Print Indicator = 3 (Collective Slip) for MIGO transaction
3. Maintained Print Indicator for GI/Transfer Posting Documents - here I linked print item for my
     mov.types.
   I have maintained User Parameter NDR = "X"
Output determination settings as follows:
1.Defined my output types with access seq=0003
2.Linked output types to O/p det.procedure ME0001 (requirement field blank)
3.Maintained condition records for Trans.type WA
     Here, the key combination for debit/credit indicator is not appearing for selection
     - hence I am not able to maintain condition records at the debit/credit level for transactions like
       stock transfer but I am able to maintain conditions without Debit/Credit indicator.
     - as a result, during output determination, 2 messages appear for each document item.
   I want only one output message per document item.
    I tried changing access sequence for my output type to 0004 but once I did that, no output was
    getting determined for my material documents.
    How do I solve this.
    Is there any other config to be done (for eg. requirement in Inv.Mgmt procedure)?
    Is there any other user parameter I should check out?
    Thanks & Regards
    Prabhu
Edited by: Prabhu Sundararaman on Dec 16, 2008 12:31 PM

You call do_addition with a wrong set of parameters or you use the wrong datatypes from your parameters.
Check what parameters ( and their datatypes ) that procedure expects.
Also check if you have the right privileges for using UPDATE_ERROR_MSG and that a synonym exists for it.
fa_addition_pub.do_addition
(p_api_version => 1.0,
p_init_msg_list => fnd_api.g_false,
p_commit => fnd_api.g_false,
p_validation_level => fnd_api.g_valid_level_full,
x_return_status => l_return_status,
x_msg_count => l_mesg_count,
x_msg_data => l_mesg,
p_calling_fn => 'FA_ADDITION_API', ---modify by anand
px_trans_rec => l_trans_rec,
px_dist_trans_rec => l_dist_trans_rec,
px_asset_hdr_rec => l_asset_hdr_rec,
px_asset_desc_rec => l_asset_desc_rec,
px_asset_type_rec => l_asset_type_rec,
px_asset_cat_rec => l_asset_cat_rec,
px_asset_hierarchy_rec => l_asset_hierarchy_rec,
px_asset_fin_rec => l_asset_fin_rec,
px_asset_deprn_rec => l_asset_deprn_rec,
px_asset_dist_tbl => l_asset_dist_tbl,
px_inv_tbl => l_inv_tbl,
px_inv_rate_tbl => l_inv_rate_tbl
);

Re: Using Alt-Key combinations

Unfortunately this happens not only with Alt-Key combinations. It also
happens with the ordinary F10 key: Windows activates the menu and then
Forte gets the FKey event. The problem is that now the user has to press
ESC to deactivate the menu and continue normal processing. There is no
known cure yet...
Tony Elmore wrote:
>
We are attempting to use Alt-Key combinations for a shortcut key combination
for push buttons using the SetAsFunctionKey method and FunctionKeyPress
event. When we press the Alt-Key combination, it appears that Windows is
trying to find a menu item with that shortcut combination or a button with
that combination. Since Windows can not find the proper element with that
combination, it beeps at us. At that point, Forte picks up the key
combination and will post the FunctionKeyPress event.
The application will work fine, but the beep is not only annoying, but also
is misleading for those individuals using accessibility tools like screen
readers who rely upon audible queues for detecting errors in keyboarding.
Has anyone found any viable solutions to this problem?--
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

petelewis wrote:
Mr.Elendig wrote:it returns ^[a as it should.
Ah ha - okay. So you're using escapes too, rather than meta8 (this is the default, so makes sense). Yeah, I got it working doing that, but had to adapt my .vimrc to get it to acknowledge the ^[ as "alt". Didn't you, or did a simple map of e.g. <A-a> suffice?
Are you running it in screen/tmux btw? and what is your TERM set to?
Yeah, I thought that too and though I do run it in tmux usually, I've been testing it both with and without (TERM is set to screen-256color BTW) and it made no difference. Still, unless I specifically map the ^[ to alt in vim, it doesn't work. With meta8 it works so long as the locale is not UTF-8.
Guess I've got a workaround for now, but it would be nice if meta8 and utf-8 worked nicely together.
Thanks.
Could you please show how your vimrc looks like? I have the same problem and I'm interested in your workaround.

Is there a "fine" move key combination for precision placement?

Similar Messages

Maybe you are looking for